ARNO AKB. Short-hole drill for performance drilling. Drill with interchangeable insert High feed rates Good swarf control NEW.

Transcription

1 Short-hole drill for performance drilling Drill with interchangeable insert High feed rates Good swarf control NEW

2 Easy handling and economical in use. Short-hole drill for performance drilling Improved run-out into the location flat Coated and polished holder for improved swarf evacuation and longer tool life Improved coolant flow TORX-Plus screw Improved swarf chambers for higher drill performance 4 insert geometries for wider application area 2 ARNO -Werkzeuge ARNO AKB

3 Shank to DIN 9766 with full length clamping flat Through tool coolant System introduction With the ARNO AKB drilling system we offer you even more options for performance drilling For high performance drilling in steel and cast materials With through tool coolant Right hand cutting Available in drill depth 2 x D and 3 x D Diameter range 14 mm 45 mm mm available with 0.5 mm increments mm available with 1.0 mm increments Torx-Plus screws for better locking Inside and outside insert the same Product extension with other drill depths planned for quarter 1 / 2013 Extensive tooling identification marking: Ordering code Diameter Torque screw recommendation Spare parts Advantages 4 edges per insert Inserts available in 4 geometries and 4 grades Strong cutting edges and edge radii Generates low axial cutting forces Centre cutting Nickel plated and polished surface for better swarf evacuation No drill retraction marks Strong insert seats Suitable for use on machining centres and lathes High process security due to very strong inserts High productivity due to high feed rate potential Also suitable for cross hole drilling Ideal for drilling out chambers Large ground location flat for optimum tool location ARNO -Werkzeuge ARNO AKB 3

4 Drill body Designation code Drill body AKB AKB = ARNO Shorthole drill 2 Drill depth 2 x D mm diameter R20 R = right hand cutting 20 = cylindrical shank dimension -04 Insert reference size Designation code Inserts XDMT EN BM AK1010 ISO insert shape Insert size Geometry Grade 05 = edge length 02 = thickness 04 = edge radius EN = edge preparation BS = fine machining BM = medium machining BR = rough machining BAL = none ferrous maching 4 ARNO -Werkzeuge ARNO AKB All dimensions in mm.

5 Drill body Drill body 2 D * Designation D L L2 L3 d PG 34 Insert AKB2-1400R XDMT 04 AKB2-1450R XDMT 04 AKB2-1500R XDMT 04 AKB2-1550R XDMT 05 AKB2-1600R XDMT 05 AKB2-1650R XDMT 05 AKB2-1700R XDMT 05 AKB2-1750R XDMT 05 AKB2-1800R XDMT 05 AKB2-1850R XDMT 06 AKB2-1900R XDMT 06 AKB2-1950R XDMT 06 AKB2-2000R XDMT 06 AKB2-2050R XDMT 06 AKB2-2100R XDMT 06 AKB2-2150R XDMT 06 AKB2-2200R XDMT 06 AKB2-2250R XDMT 06 AKB2-2300R XDMT 07 AKB2-2350R XDMT 07 AKB2-2400R XDMT 07 AKB2-2450R XDMT 07 AKB2-2500R XDMT 07 AKB2-2550R XDMT 07 AKB2-2600R XDMT 07 AKB2-2650R XDMT 07 AKB2-2700R XDMT 07 AKB2-2750R XDMT 07 AKB2-2800R XDMT 07 AKB2-2850R XDMT 07 AKB2-2900R XDMT 09 AKB2-2950R XDMT 09 AKB2-3000R XDMT 09 AKB2-3100R XDMT 09 INFORMATION: Please note cutting recommendations on page 15. More holders on next page. *Available by Q2/2013 All dimensions in mm. ARNO -Werkzeuge ARNO AKB 5

6 Drill body Drill body 2 D * Designation D L L2 L3 d PG 34 Insert AKB2-3200R XDMT 09 AKB2-3300R XDMT 09 AKB2-3400R XDMT 09 AKB2-3500R XDMT 09 AKB2-3600R XDMT 09 AKB2-3700R XDMT 12 AKB2-3800R XDMT 12 AKB2-3900R XDMT 12 AKB2-4000R XDMT 12 AKB2-4100R XDMT 12 AKB2-4200R XDMT 12 AKB2-4300R XDMT 12 AKB2-4400R XDMT 12 AKB2-4500R XDMT 12 INFORMATION: Please note cutting recommendations on page 15. *Available by Q2/ ARNO -Werkzeuge ARNO AKB All dimensions in mm.

7 Drill body Drill body 3 D * Designation D L L2 L3 d PG 34 Insert AKB3-1400R XDMT 04 AKB3-1450R XDMT 04 AKB3-1500R XDMT 04 AKB3-1550R XDMT 05 AKB3-1600R XDMT 05 AKB3-1650R XDMT 05 AKB3-1700R XDMT 05 AKB3-1750R XDMT 05 AKB3-1800R XDMT 05 AKB3-1850R XDMT 06 AKB3-1900R XDMT 06 AKB3-1950R XDMT 06 AKB3-2000R XDMT 06 AKB3-2050R XDMT 06 AKB3-2100R XDMT 06 AKB3-2150R XDMT 06 AKB3-2200R XDMT 06 AKB3-2250R XDMT 06 AKB3-2300R XDMT 07 AKB3-2350R XDMT 07 AKB3-2400R XDMT 07 AKB3-2450R XDMT 07 AKB3-2500R XDMT 07 AKB3-2550R XDMT 07 AKB3-2600R XDMT 07 AKB3-2650R XDMT 07 AKB3-2700R XDMT 07 AKB3-2750R XDMT 07 AKB3-2800R XDMT 07 AKB3-2850R XDMT 07 AKB3-2900R XDMT 09 AKB3-2950R XDMT 09 AKB3-3000R XDMT 09 AKB3-3100R XDMT 09 INFORMATION: Please note cutting recommendations on page 15. More holders on next page. *Available from January 2013 All dimensions in mm. ARNO -Werkzeuge ARNO AKB 7

8 Drill body Drill body 3 D * Designation D L L2 L3 d PG 34 Insert AKB3-3200R XDMT 09 AKB3-3300R XDMT 09 AKB3-3400R XDMT 09 AKB3-3500R XDMT 09 AKB3-3600R XDMT 09 AKB3-3700R XDMT 12 AKB3-3800R XDMT 12 AKB3-3900R XDMT 12 AKB3-4000R XDMT 12 AKB3-4100R XDMT 12 AKB3-4200R XDMT 12 AKB3-4300R XDMT 12 AKB3-4400R XDMT 12 AKB3-4500R XDMT 12 INFORMATION: Please note cutting recommendations on page 15. *Available from January 2013 Spare parts Screw Key Torque max. Insert SS4104 T5106-IP 0.6 Nm XDMT 04 SS4105 T5106-IP 0.8 Nm XDMT 05 SS4106 T5107-IP 1.0 Nm XDMT 06 SS4107 T5108-IP 1.0 Nm XDMT 07 SS4109 T5115-IP 3.0 Nm XDMT 09 SS4112 T5120-IP 5.0 Nm XDMT 12 8 ARNO -Werkzeuge ARNO AKB All dimensions in mm.

9 Geometry and grade description Geometry description NEW BS Low feed rates / swarf control Good swarf control at low feed rate Excellent hole quality High surface finish NEW BM BR Universal application General purpose geometry Good swarf control Generates low cutting forces and low to medium feed rates Strong cutting edge / high feed rates Strengthened cutting edges for high feed rates Absorbs vibrations well Reduced noise BAL For drilling aluminium Good swarf control High resistance to build up edge Excellent tool life Grade description AP5020 PVD-Multilayer coating, substrate +TIALN For machining steel, stainless steel and cast materials. A versatile grade for low to medium cutting speed. The harder substrate is very wear resistant and therefore offers good tool life. High heat resistance. AK5020 PVD-Multilayer coating, substrate + TIALN Main grade for drilling cast materials. Extreme performance due to combination of fine grain substrate and coating. For use with medium cutting speeds under normal to stable machine conditions. AP5030 PVD-Multilayer coating, substrate + TIALN A tougher universal grade in the P30-P35 ISO area. Main application area is steel drilling but also suitable for stainless steel. Can also be used for interrupted cutting AK1010 Uncoated The main grade for drilling GG cast iron, aluminium, aluminium alloys, copper and copper alloys as well as bronze and brass at medium data and in good machine conditions. ARNO -Werkzeuge ARNO AKB 9

10 r l ARNO AKB Inserts b S d 1 XDMT Geometry for fine machining BS PG 36 coated uncoated NEW * Designation l b S d 1 r AP5020 AK5020 AP5030 XDMT EN-BS * XDMT EN-BS * XDMT EN-BS * XDMT EN-BS * XDMT EN-BS * XDMT EN-BS * *Available from January 2013 P M K N S H AK1010 XDMT Geometry for medium machining BM coated PG 36 uncoated Designation l b S d 1 r AP5020 AK5020 AP5030 AK1010 XDMT EN-BM XDMT EN-BM XDMT EN-BM XDMT EN-BM XDMT EN-BM XDMT EN-BM P M K N S H 10 ARNO -Werkzeuge ARNO AKB All dimensions in mm. = Main application = Secondary application

11 r l ARNO AKB Inserts b S d 1 XDMT Geometry for heavy machining BR PG 36 coated uncoated NEW * Designation l b S d 1 r AP5020 AK5020 AP5030 XDMT EN-BR * XDMT EN-BR * XDMT EN-BR * XDMT EN-BR * XDMT EN-BR * XDMT EN-BR * *Available from January 2013 P M K N S H AK1010 XDMT Geometry for aluminium BAL coated PG 36 uncoated Designation l b S d 1 r AP5020 AK5020 AP5030 AK1010 XDMT EN-BAL * XDMT EN-BAL * XDMT EN-BAL * XDMT EN-BAL * XDMT EN-BAL * XDMT EN-BAL * On request also available as coated insert P M K N S H All dimensions in mm. = Main application = Secondary application ARNO -Werkzeuge ARNO AKB 11

12 Application area Drilling into poor surfaces Drilling into a cambered surface Depending on quality of surface, feed rate may need to be reduced. Reducing feed rate may be required Drilling into an angle Cross-hole drilling Up to maximum 3 no need to reduce feed rate Above 3 reduce feed rate by % until drill is in full cut Use strong edge radius Reduce feed rate by % Be aware of swarf jamming Use tough carbide grade Use strong edge radius Drilling exit into an angle Drilling of chamber Above 3 reduce feed rate by % until drill is in full cut Use tough carbide grade Use strong edge radius Drill in order as shown on picture Ensure symmetrical machining Reduce feed rate by % Use tough carbide grade Use strong edge radius 12 ARNO -Werkzeuge ARNO AKB

13 Application area Drilling into groove or large centre bore Spot Drilling into welded seam Facing may be required Reduce feed rate Reduce feed rate Drilling into edge Boring Must be prepared by either spot facing or face milling Avoid swarf jamming Possibly reduce diameter of drill body For further information please ask for our complete catalogue. ARNO -Werkzeuge ARNO AKB 13

14 Information Insert design Inside pocket Outside pocket Outside pocket Inside pocket Offsetting centreline By offsetting the centreline of the drill in the direction of the outside pocket by a maximum of x it is possible to create a larger diameter bore. Please do not offset above the max values in chart. X Diameter Holder (mm) Max offset (mm) Diameter Holder (mm) Max offset (mm) The chart values are recommendations, reduce feed rate to 30 %. Values may change depending on application For further information please ask for our complete catalogue. 14 ARNO -Werkzeuge ARNO AKB

15 Recommended cutting data Recommendations 2 x D ISO Material Toughness [N/mm 2 ] Geometry Grade Cutting speed V C [m/min] Feed rate f [mm / U] mm mm mm mm P M Carbon steel Low alloyed steel High alloyed steel Stainless Steel K Cast iron (GG) Nodular cast iron (GGG) 440 BS AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BS AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BS/BM AP5030* BS/BM AP5030* BS/BM AP5030* BS/BM AP5030* BR AK BR AK BR AK BR AK N Aluminium alloy BAL AK Copper alloy BAL AK Heat resistant alloy 700 BS/BM AP5030* S Recommendations 3 x D *2nd choice AP5020 ISO Material Toughness [N/mm 2 ] Geometry Grade Cutting speed V C [m/min] Feed rate f [mm / U] mm mm mm mm P M Carbon steel Low alloyed steel High alloyed steel Stainless Steel K Cast iron (GG) Nodular cast iron (GGG) 440 BS AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BS AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BM AP5030* BS/BM AP5030* BS/BM AP5030* BS/BM AP5030* BS/BM AP5030* BR AK BR AK BR AK BR AK N Aluminium alloy BAL AK Copper alloy BAL AK Heat resistant alloy 700 BS/BM AP5030* S *2nd choice AP5020 For applications with average conditions (work holding, coolant pressure and stability) please use the middle recommendation. The values are only recommendations, it may be necessary to adjust in line with machining conditions. All dimensions in mm. ARNO -Werkzeuge ARNO AKB 15

16 itungszentren. nseil Uhr für Sie erreichbar. ccleshall. Staffordshire. ST21 6NF de. lia.it. Harvard, Illinois om Vladimir u.ru. Über unsere gebührenfreie Bestell-Hotline: 0800 / sind wir Mo. Do. von Uhr und Fr. von Uhr für Sie erreichbar. ARNO -Werkzeuge U_Drehen 20,5 mm_16-8:u_drehen 20, :50 Uhr Seite 1 ARNO WERKZEUGE Werkzeuge und Schneideinsätze zum Ein- und Abstechen Tools and inserts for parting and grooving V Ib Ein- und Abstechen ARNO WERKZEUGE Werkzeuge und Wendeschneidplatten zum Drehen und Gewindedrehen Tools and indexable inserts for turning and threading III c Drehen und Gewindedrehen Werkzeuge und Wendeschneidplatten zum Fräsen und Gewindefräsen Milling cutters and indexable inserts for milling and thread milling IV Fräsen und Gewindefräsen Outils et plaquettes de tronçonnage et rainurage Outils et plaquettes amovibles de tournage et filetage Outils et plaquettes amovibles de fraisage et filetage par fraisage w w w. a r n o. d e Tools and inserts for parting and grooving Tooling and indexable inserts for turning and threading Milling cutters and indexable inserts for milling and thread milling Wendeschneidplatten nd Gewindedrehen exable inserts threading rti di tornitura simplex.de Vb Bohren / Drilling / Foratura ARNO WERKZEUGE Werkzeuge und Wendeschneidplatten zum Bohren Tools and inserts for drilling Vb Bohren Utensili ed inserti di foratura Wendeschneidplatten d indexable inserts rti di Foratura ahmen ols mandrini Drilling tools and indexable inserts for drilling For further information please ask for our complete catalogue. Karl Heinz Arnold GmbH Karlsbader Str. 4 D Ostfildern Tel.: +49 (0) Fax: +49 (0) info@arno.de ARNO (UK) Limited Unit 3, Sugnall Business Centre Sugnall, Eccleshall Staffordshire ST21 6NF ( sales@arno.de ARNO Italia S.r.l Via J. F. Kennedy Vimercate (MB) ( info@arno-italia.it ARNO-Werkzeuge USA LLC 1101 W. Diggins St. US Harvard, Illinois ( info@arnousa.com ARNO RU Ltd. Krassnaja Ul. 38 RU Vladimir ( / COT info@arnoru.ru agencyteam ARNO GB