STAINLESS STEEL EXPANSION JOINT, TYPE ABS
|
|
- Harriet Lambert
- 6 years ago
- Views:
Transcription
1 STAIESS STEEL EXPANSION JOINT, TYPE ABS An expansion joint with steel welding ends for applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. The expansion joint will be delivered pre-stressed, which allows a maximum movement. 2 Bellow () : AISI 6Ti Welding ends (2) 4 Outer sleeve () : AISI 04 d Inner sleeve (4) : AISI 04 Pre-stressed Length d mm (in.) mm mm mm mm bar/20 C bar/00 C 5(/2) ABS , (/4) ABS , () ABS , (./4) ABS , (./2) ABS , (2) ABS , (2./2 ) ABS , 6 0 * = Pre-stressed Length.
2 STAIESS STEEL EXPANSION JOINT, TYPE ABFT An expansion joint with female thread socks which guarantee fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. ue to its aesthehic appearance, this expansion joint is widely used in livingrooms, hotelchambers, offices etc. With the help of the limiting-pin, minimum and maximum limits and pretension are observed easily Bellow () : AISI 6Ti Sockets (2) Outer sleeve () Inner sleeve (4) : AISI 04 Pin (5) Extension d mm (in.) mm mm mm mm R bar/70 C bar/00 C 5(/2) ABFT / (/4) ABFT / () ABFT (./4) ABFT / (./2) ABFT / (2) ABFT
3 STAIESS STEEL EXPANSION JOINT, TYPE ABSM An expansion joint with stainless steel press fittings, e.g. Mapress, Xpress, Profipress, Bonfix etc., which guarantee very fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. The expansion joint will be delivered pre-stressed, which allows a maximum movement. 4 2 Bellow () : AISI 6Ti d 5 Welding ends (2) Mapress fitting () : AISI 6 L Outer sleeve (4) : AISI 04 Inner sleeve (5) : AISI 04 Pre-stressed Length d mm (in.) mm mm mm mm bar/20 C bar/00 C 5(/2) ABSM (/4) ABSM () ABSM (./4) ABSM (./2) ABSM (2) ABSM * = Pre-stressed Length.
4 STAIESS STEEL EXPANSION JOINT, TYPE ABFTM An expansion joint with female thread socks and prefab stainless steel press fittings, e.g. Mapress, Xpress, Profipress, Bonfix etc., which guarantee very fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. ue to its aesthehic appearance, this expansion joint is widely used in livingrooms, hotelchambers, offices etc. With the help of the limiting-pin, minimum and maximum limits and pretension are observed easily. TL=+2X A 6 "A" "A" Bellow () Sockets (2) : AISI 6Ti d Outer sleeve () Inner sleeve (4) : AISI 04 Pin (5) A : Is dependable of the brand Press fitting. Mapress-fitting (6) : AISI 6L Extension d mm (in.) mm mm mm mm mm bar/70 C bar/00 C 5(/2) ABFTM (/4) ABFTM () ABFTM (./4) ABFTM (./2) ABFTM (2) ABFTM
5 STAIESS STEEL EXPANSION JOINT, TYPE ANW An expansion joint with steel welding ends for applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint has to be welded into the piping system and it is basically meant for axial movements. 4 Bellow () : AISI 6Ti Welding ends (2+) Inner sleeve (4, Option) : AISI 04 E 2 Extension E mm (in.) mm mm mm mm mm bar/20 C bar/00 C 5(/2) ANW ,x2, (/4) ANW ,9x2, () ANW ,7x, (./4) ANW ,4x, (./2) ANW ,x, (2) ANW ,x (2./2) ANW ,x, () ANW ,9x6, (4) ANW , x4, (5) ANW ,7x4, (6) ANW ,x4, (8) ANW ,x6, (0) ANW x6, (2) ANW ,9x8,
6 STAIESS STEEL EXPANSION JOINT, WITH FIXE FLANGES, TYPE ANF An expansion joint with steel welding ends with steel fixed flanges according to PN0/PN6 (see table) For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. Flanges are mounted in line. Bellow () : AISI 6Ti Welding ends (2) Flanges () Inner sleeve (4, Option) : AISI FLANGES Fixed, PN 6( 200 up to 00-PN 0), carbon steel. Other flanges (ANSI) on request. Extension Flange connection mm (in.) mm mm mm mm bar/20 C bar/00 C 5(/2) ANF PN (/4) ANF PN () ANF PN (./4) ANF PN (./2) ANF PN (2) ANF PN (2./2) ANF PN () ANF PN (4) ANF PN (5) ANF PN (6) ANF PN (8) ANF PN (0) ANF PN (2) ANF PN 0 6 0
7 STAIESS STEEL EXPANSION JOINT, WITH SWIVEL FLANGES, TYPE A An expansion joint with stainless steel collars with steel swivel flanges according to PN0/PN6 (see table) For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements and where a short overall length is required. 2 Bellow () : AISI 6Ti Collars (2) : AISI 2 Flanges () FLANGES Swivel flanges, PN 6( 200 PN 0), carbon steel. Extension Flange connection mm (in.) mm mm mm mm bar/20 C bar/00 C 5(/2) A PN (/4) A PN () A PN (./4) A PN (./2) A PN (2) A PN (2./2) A PN () A PN (4) A PN (5) A PN (6) A PN (8) A PN 0 6 0
8 STAIESS STEEL EXPANSION JOINT, TYPE ALG An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed on site. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. The shown type is recommended for mounting with Grinnell Rigid couplings. E 2 Bellow () : AISI 6Ti Grooved ends (2) : Carbon steel Inner sleeve() : AISI 04 Extension E mm (in.) mm mm mm mm mm bar/20 C bar/00 C 25() ALG ,7x5, (./4) ALG ,4x4, (./2) ALG ,x (2) ALG ,x (2./2) ALG ,x
9 STAIESS STEEL EXPANSION JOINT, TYPE ANS An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed on site. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. The shown type is recommended for mounting with Grinnell Rigid couplings. 2 Bellow () Grooved ends (2) : AISI 6Ti : Carbon steel E Extension E mm (in.) mm mm mm mm mm bar/20 C bar/00 C 80() ANS ,9x6, (4) ANS , x6, (5) ANS ,7x6, (6) ANS ,x (8) ANS ,x
10 STAIESS STEEL EXPANSION JOINT, TYPE RXAG An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed on site. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements, and has an outer protection sleeve. The shown type is recommended for mounting with Grinnell Rigid couplings. 4 2 Bellow () : AISI 6Ti Grooved ends (2) End/Guide Ring () E Outer protection sleeve (4) : AISI 04 Extension E mm (in.) mm mm mm mm mm bar/20 C bar/200 C 25() RXAG ,7x5,0 88, (./4) RXAG ,4x4,5 0, (./2) RXAG ,x5 4, (2) RXAG ,x (2./2) RXAG ,x () RXAG ,9x6, (4) RXAG , x6, (5) RXAG ,7x6, (6) RXAG ,x (8) RXAG ,x (0) RXAG x (2) RXAG ,9x8,
Examples Page 43 of 45
UHDE-STANDARD Welding UN WELDED JOINTS V416-01 for vessels and equipment Part 2 (M) Examples Page 43 of 45 Item Figure Application Requirements Notes Small pad type flanges of austenitic steel, clad vessel
More informationStandard Tube & Pipe Adapters
Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,
More informationArsen EXPANSION JOINTS
QUALITY MANAGEMENT SYSTEM Arsen EXPANSION JOINTS AXIAL EXPANSION JOINTS EXTERNALLY PRESSURIZED EXPANSION JOINTS UNIVERSAL TIED EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS RUBBER EXPANSION JOINTS
More informationRoad Tunnel Fire Protection. with Alvenius Piping Systems
Road Tunnel Fire Protection with Alvenius Piping Systems EN 2 Alvenius piping systems where top safety is paramount Alvenius supplies reliable and safe steel piping for fire protection in road tunnels.
More informationTDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
More informationMetal expansion joints
Metal s EXPANSION JOINTS ARE FLEXIBLE BELLOWS USED FOR elimination of thermal dilatation in pipelines with variable temperature (hot water, steam, gasfumes) absorbing mechanical vibrations from vibrant
More informationAVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
More informationArms Group Drainage System. 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve
Arms Group Drainage System 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve Swivel Joint Type Model No. 1010 Sizes 3in through 8in Heavy
More informationSystem Description BRF. Drinking water pipes. BRUGG drinking water pipe, Type BRF made of stainless steel V2A / V4A. Construction: 07.
System Description 10. BRUGG drinking water pipe, Type made of stainless steel V2A / V4A The pipe is a preinsulated plastic jacket pipe system for transporting drinking water or sewage. It is a pipe system
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 23 05 16 EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section includes flexible pipe connectors, expansion joints and compensators, pipe loops, offsets, and swing
More informationModel EVMS Vertical Multistage Pumps for the Global Market
New Products & New Techniques Model EVMS Vertical Multistage Pumps for the Global Market Hiroyuki KAWASAKI*, and So KUROIWA* Abstract As key products for the global market, new model EVMS stainless vertical
More informationExpansion Joints Guide Module 6 - Low Pressure Expansion Joints General - Standard Program (EFB) - Installation Instructions - Technical Data
Expansion Joints Guide Module 6 - Low Pressure Expansion Joints General - Standard Program (EFB) - Installation Instructions - Technical Data BOA Expansion Joints Guide Expansion Joints Guide Summary Module
More informationFlanged chemical seals series D
Flanged chemical seals series D80-8-85 hemical seals with built-in flange Flange facing and diaphragm of the same material (D8, D85) Fluid temperature from -60 to +00 D80 DN 5 mm D80 DN > 5 mm Designed
More informationFittings. Elbow Pipe. Specifications:
Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction;
More informationFlexible metal hoses
Flexible metal hoses General information Use of hoses of hoses of braiding Bending radius Thermal resistance Pressure resistance Protection of hoses Metal hoses are flexible corrugated metal pipes manufacture
More informationTunnelling steel pipe systems. Cost-efficient, flexible, reliable.
Tunnelling steel pipe systems. Cost-efficient, flexible, reliable. EN 2 You tunnel. We supply the flexible pipe systems. Tough environment, tough conditions, maximum operating reliability and simple installation.
More informationKLINGER. Spiral Wound Gaskets. Certified Fire Safe According to API 6FB!
KLINGER Spiral Wound Gaskets Certified Fire Safe According to API 6FB! Summary of the eight versions of KLINGER SWGs, the design principle, materials and mounting instructions. KLINGER Spiral-Wound Gaskets
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 23 05 16 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
More informationModel 410 Threaded Straight Thermowell. Model 411 Threaded Tapered Thermowell. Model 412 Threaded Reduced Tip Thermowell 1.
Model 410 Threaded Straight Thermowell 1.75 + T 3/4 NT 0.75 0.75 1 NT 0.875 0.875 Model 411 Threaded Tapered Thermowell 1.75 + T 3/4 NT 0.875 0.625 1 NT 1.063 0.625 Model 412 Threaded Reduced Tip Thermowell
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationStyle 206 Product Specification
Style 206 Product Specification 1.0 Application The Style 206 is used in rigid piping systems to compensate for axial, lateral, torsional and angular movement and misalignment due to thermal expansion
More informationFlow Assembly for ph and Redox Sensors FlowFit P CPA 240
Technical Information TI 179C/07/en Flow Assembly for ph and Redox Sensors FlowFit P CPA 40 ph flow assembly for demanding processes with high requirements. Sensor holder with three electrode mounting
More informationA MEMBER OF EURO-QUALIFLEX EXPANSION JOINTS
A MEMBER OF EURO-QUAIFEX EXPANSION JOINTS 08.2016 info@ayvaz.com www.ayvaz.com META BEOWED EXPANSION JOINTS One of the basic rules of physics is materials to expand and compress caused by the temperature
More informationOF CENTRIFUGAL TYPE ba.
Pumps Mixers Aeration Controls Services SCANPUMP PROCESS pumps OF CENTRIFUGAL TYPE ba. www.scanpump.com Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged
More informationJohnson. We now offer a real step forward in reliability with our newly designed riser pipes.
RISER PIPES Johnson enjoys today an enviable reputation with drilling and water industry professionals as the exclusive designer and manufacturer of wire-wrapped screens. In addition to our skills and
More informationOUR POWER, YOUR SATISFACTION
OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DH / JH series NR_BCH_FR_003 R00 25/02/2016 Hopper series The Diamond Series with hopper an auger feed screw to convey directly the product
More informationaxial compression mm mm mm mm +/-mm +/- deg
Product Nº : trb/16/121 Standard Single Sphere Flanged Design ConDitions Max. Working Pressure Burst Pressure Vacuum Rating 16 Bar >30 Bar 600mm WG Temperature Range -10ºC to 90ºC Test Pressure Bellows
More informationGUILLEMIN COUPLINGS EN / NF E
EN 14420-8 / NF E 29-572 STANDARD LMC s Guillemin couplings are symmetric couplings designed in compliance with EN 14420-8 / NF E 29-572. OPERATION A Guillemin coupling, consist of a seal * on the connection
More informationOUR POWER, YOUR SATISFACTION
OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DN / JN series NR_BCH_EN_002 R01 25/01/2016 Flanged Industrial Series The DN and JN Diamond series is the best solution for the industrial sector
More informationGoulds Multistage Process Pumps
Goulds 3355 Multistage Process Pumps Multiple nozzle orientations to fit your piping configurations. Radial Suction Configuration. Radial nozzles are rotatable at 90 increments. Goulds Model 3355 Multistage
More informationGlass & Quartz Components
VACUUM Glass & Quartz Components KF Chain Clamps for Glass Components DN 10 / 16-63... 04 ISO Chain Clamps for Glass Components DN 80-160... 06 KF Elastomer Seals for Glass Components DN 10 / 16-63...
More informationWILLBRANDT PTFE Expansion Joint Type 80
WILLBRANDT PTFE Expansion Joint Type 0 00 Type 0 is a 3 or corrugated PTFE expansion joint that is hotformed under pressure from extruded PTFE tubing. The fibers are executed without interruption. It is
More informationPumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. 1
Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. www.absgroup.com 1 Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged design
More informationOUR POWER, YOUR SATISFACTION
OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DH / JH series NR_BCH_EN_003 R03 28/09/2016 Hopper series The Diamond Series with hopper an auger feed screw to convey directly the product
More informationHOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST
HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST 2 3 WEAR RESISTANT FLEXIBLE INDUSTRIAL TRANSPORT VEINS Pipes and hoses are the transport veins for industrial processes. Often special solutions
More informationPETREX -CNT. Pipe systems for petrol stations Technical details
PETREX - Pipe systems for petrol stations Technical details Contents 1.0 1.0 Contents 1.10 1.100 System description System description PETREX - 1.11 1.11.01 Product overview Piping, connections, fittings
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationG-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
More informationMJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps
MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps PFA PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Lined Type Sealless Corrosion Resistant Chemical Pumps MJ / MJ-B Series Sealless, Fluoropolymer Lined,
More informationPRODUCT GUIDE. C.A. Baldwin & Co Ltd. Quality is our strength
PRODUCT GUIDE C.A. Baldwin & Co Ltd Quality is our strength INDEX Expansion / Anti-vibration Couplings Pages 1 7 Repair Bandage Page 8 Fixing and Repair Clamps Pages 9 19 Compression Fittings for Steel
More informationAN INFORMED COMPLIANCE PUBLICATION JULY 2008
1 What Every Member of the Trade Community Should Know About: Classification and Marking of Pipe Fittings under Heading 7307 Edited for scope by M.E.Dey & Co Inc AN INFORMED COMPLIANCE PUBLICATION JULY
More informationWide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
More informationGeorg Fischer Waga N.V. The connection for all pipe diameters Restraint - non restraint DN50 - DN600 MULTI/JOINT 3000 Plus
Georg Fischer Waga N.V. The connection for all pipe diameters Restraint - non DN50 - DN600 MULTI/JOINT 3000 Plus MULTI/JOINT 3000 Plus In your daily work you may encounter pipe systems of various materials
More informationGS_-FLANGE SYS SAE 6000 PSI INFORMATION GENERAL. Type Approvals 17
GENERAL SAE 6000 PSI GS-FLANGE Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Type Approvals 17 Retain Ring- and 37 Flare Flange
More informationTAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
More informationPPR PIPELINE WELDING TOOLS
PPR PIPELINE WELDING TOOLS www.aquart.com AQUART always with you! AQUART PPR pipes and fittings are well known on the pipeline market for more than 15 years already. China and Indonesia, Russia and former
More informationDesign And Thermal Analysis of Thermal Expansion Joint in Industrial Application
IJIRST International Journal for Innovative Research in Science & Technology Volume 2 Issue 1 June 2015 ISSN (online): 2349-6010 Design And Thermal Analysis of Thermal Expansion Joint in Industrial Application
More informationON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
More informationCast iron BR 600 Page 2. High temperature steel DN Page 8 BR 600 DN Page 10. High temperature steel BR 600 Page 12
Bimetallic steam traps TRACO CONA B Bimetallic steam trap PN6 - with flanges (BR 600...) - union with butt weld ends (BR 600...5) Cast iron BR 600 Page 2 Bimetallic steam trap PN40 - with flanges (BR 600/60...)
More informationWANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
More informationINIZIATIVE INDUSTRIALI
INIZIATIVE INDUSTRIALI S.p.A. Sarplast is a company located in Santa Luce (Pisa, Italy) which has over 35 years experience in the design, manufacturing and supply of Glass-Fiber Reinforced Plastic (GRP)
More informationPart Number movement overall length (mm) + or - mm total mm
Product Nº : SAF/10/001 Standard Single Axial Flanged Design ConDitions Max. Design Pressure 10 Bar Max. Design Temperature 300ºC Test Pressure Bellow Options Flange Options 15 Bar Drilling Options PN
More informationPArt NumbEr movement overall LENgth (mm) + or - mm total mm
Product Nº : SAF/16/001 Standard Single Axial Flanged Design ConDitions Max. Design Pressure 16 Bar Max. Design Temperature 300ºC Test Pressure 24 Bar Bellow Options 321/316/Alloy Flange Options Carbon
More informationPart Number movement overall length (mm) + or - mm total mm
Product Nº : SAF/03/001 Standard Single Axial Flanged Design ConDitions Max. Design Pressure 3 Bar Max. Design Temperature 300ºC Test Pressure Bellow Options Flange Options Drilling Options 4.5 Bar 321/316/Alloy
More informationRTM ACCESSORIES. MOLD SEALS ( Packing : 25LM Rolls ) Standard Dynamic Seal White. Medium Dynamic Seal Blue. Primary seal for Hollow Dynamic Seal
MOLD SEALS ( Packing : 25LM Rolls ) Standard Dynamic Seal White Medium Dynamic Seal Blue RD421-001 Dynamic section mould. Seal for use as a resin seal in RTM or RTM light. Possibility to do the vacuum
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFLEXIBLE HOSES FOR FLUIDS AND GASES: ANACONDA CORRUGATED HOSES TYPE BW656, BW756, BW856, BW956, BW673 & ANAFLEX
FLEXIBLE HOSES FOR FLUIDS AND GASES: ANACONDA CORRUGATED HOSES TYPE BW656, BW756, BW856, BW956, BW673 & ANAFLEX HOSE SELECTION TABLE Hose Material Material Size (mm) Temp. ( C) Type Hose Braid Min. Max.
More informationALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
More informationWith World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
More informationseamless, double walled, made of , option: Hastelloy and other materials Heating jacket (option)
General Data Series 6N Nominal Size DN / -500 / 6 20 Nominal Pressure PN / ANSI 10-40 / Class - Characteristics equal percentage or Rangeability 40:1 guide stem guided, option: double guiding (retrofit
More informationDiaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
More informationPETRO- CHEMISTRY APPLICATIONS
PETRO- CHEMISTRY APPLICATIONS Witzenmann GmbH Östliche Karl-Friedrich-Str. 134 75175 Pforzheim, Germany Phone +49 7231 581-0 Fax +49 7231 581-820 wi@witzenmann.com www.witzenmann.de PROJECT MiRO GERMANY
More informationABS and DNV Type Approved Products
ABS and DNV Type Approved Products For Marine & Offshore Applications Metal Hose Assemblies Exhaust Bellows Multipurpose Expansion Joints ABS Product & DNV Type Approval Metal Hose ABS Certificate Number
More informationGas Station & C Store SECTION CWM Job No
SECTION 211010 - PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract
More informationTriple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
More informationV i c t a u l i c i n d u s t r i a l s o l u t i o n s. Automotive
V i c t a u l i c i n d u s t r i a l s o l u t i o n s Automotive The Victaulic pipe joining system is the ideal choice for the Automotive Industry because it offers the combined advantages of design
More informationOKAPOINT Point Supported Insulating Glass
OKAPOINT Point Supported Insulating Glass The OKAPOINT system distinguishes itself by elastic joints bolts pre-assembled in screw-in bushes countersunk or surface-mounted version General Description The
More informationExpansion joints for HVAC systems, sound absorption and vibration absorption
Expansion joints for HVAC systems, sound absorption and vibration absorption Table of Contents General Expansion joints Metal hoses 1 9 Product portfolio overview Axial steel expansion joints Sound absorbing
More informationK-FLEX SOLAR SYSTEM SOLAR SYSTEM
K-FLEX SOLAR SYSTEM SOLAR SYSTEM K-FLEX offers a line of products designed specifically for solar heating, renewable energy sources used to produce hot water using solar energy. The product range consists
More informationDesign Guide. Original version of the design guide
Page 1 of 12 Original version of the design guide For Series Components Spieth locknuts (precision locknuts) MSR 10x0.75; MSR 10x1; MSR 12x1; MSR 12x1.5; MSR 14x1.5; MSR 15x1; MSR 16x1.5; MSR 17x1; MSR
More informationM15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model , large working volume
Pressure Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.41, large working volume WIKA data sheet DS 99.32 for further approvals see page 7 Applications Aggressive,
More informationUltraGrip Optimum Wide Tolerance Repair Solution
Next Generation UltraGrip Optimum Wide Tolerance Repair Solution pipe CONNECTIONS, repair & flow control products for the utilities industry UltraGrip Overview The Perfect Partner for Difficult Repairs
More informationSwing Check Valve. Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508
Swing Check Valve PN16/PN25/Class125/Class250 Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508 Size 50 to 600 working pressure PN16/Class125. Size 50 to 300 working pressure is
More informationReference list Oil & Gas
Technip Samsung Consortium Project FLNG Prelude Year 2014 Country Australia End customer Shell Scope of work Design and manufacturing of 2 large rectangular expansion joints for steam duct between turbine
More informationCHAPTER 4. Design of Innovative Creep Testing Facility under Flowing. Sodium
CHAPTER 4 Design of Innovative Creep Testing Facility under Flowing Sodium 4.1 Introduction In this chapter, design of an innovative creep testing system comprising of a lever arm type creep machine with
More informationThis specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
More informationANSYS CALCULATIONS REPORT Outer Vessel Ansys outer vessel Sylvain ANTOINE Amaury PORHIEL - Rev C
SUMMARY 1. REVISION RECORD... 2 2. ABSTRACT... 2 3. FEA Software... 2 4. USER S DESIGN SPECIFICATION... 2 5. FEA MODEL GEOMETRY AND MESHING... 3 6. FEA MODEL CONTACT AND BOUNDARIES CONDITIONS... 4 7. FEA
More informationElectrical Isolation
Electrical Isolation Period 6 Practical Applications 2017 February 21-23, 2017 Mark E. Anderson M.T.S 1 Introduction Common isolating fittings & their installation Uses & locations of isolating fittings
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
More informationcorrosive applications
Vanéflex Expansion Joints Maintenance and downtime in various industries are unwelcome due to significant amount of wasted capital. Vanéflex multi-laminated PTFE expansion joints are designed for corrosive
More informationMatch your Inspection Ports to your Process Temperatures
ACCESS PLUG FLANGE, INC. The Worldwide Leader In Inspection Port Technology. O 1200 F Match your Inspection Ports to your Process Temperatures O 600 F O -32 F O -185 F Match your Inspection Ports to your
More informationTechnical Handbook On Rubber Expansion Joints And Flexible Pipe Connections
Technical Handbook On Rubber Expansion Joints And Flexible Pipe Connections Rubber union connector packless expansion joints. F 1123 and FSA's "Technical Handbook: Non-Metallic Expansion Joints and Flexible
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
More informationBid Opportunity PLUMBING SYSTEMS Section Installation of Boiler Heating Systems Page 1 of 7 Centennial Pool, 90 Sinclair
Installation of Boiler Heating Systems Page 1 of 7 SECTION PAGE PART 1 GENERAL 2 1.1 General 2 1.2 Reference 2 1.3 Work Included 2 1.4 Related Work Specified Elsewhere 2 PART 2 PRODUCTS 3 2.1 Pipe and
More information100% Speed One Pump Operating Range 90% Speed 65.6% Efficiency 76.6% Efficiency
350 300 100% Speed One Pump Operating Range 90% Speed 250 65.6% Efficiency 76.6% Efficiency Total Head (ft) 200 150 80% Speed 70% Speed 60% Speed 83.6% Efficiency 80 PSI Pressure 85.9% Efficiency 83.6%
More information12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS
TM 12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS The reliable pump people Performance Shown at 2000 PSID (138 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 3500 *Bi-metal construction only 50 HZ: 960 1450
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More information316 L RUBBER EXPANSION JOINTS CENTRAL HEATING SYSTEM PIPE EXPANSION JOINTS FABRIC EXPANSION JOINTS FAN-COIL FLEXIBLE CONNECTORS FLEXIBLE METAL HOSES
RUBBER flange material galvanized carbon steel 110 16 CENTRAL HEATING SYSTEM PIPE movement 50 400 mm 16 FABRIC high flexibility low reaction force vibration and noise elimination 850 FAN-COIL FLEXIBLE
More informationMetallic expansion joints Issue 1
Metallic expansion joints Issue 1 High Performance Expansion Joint Technology Applications James Walker has been involved with the manufacture and supply of all types of expansion joints and bellows for
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationCertificate of Compliance. Automatic Control Mode Sprinklers for Fire Protection
Page 1 of 1 Certificate Number Report Reference Issue Date Issued to: This is to certify that representative samples of Standard(s) for Safety: Additional Information: Only those products bearing the UL
More informationSMP Coaxial Connectors Update
SMP Coaxial Connectors 2005 Update SV Microwave has introduced a complete line of SMP connectors which conform to DSCC 94007, 94008 and MIL-STD-348 specifications. SMP connectors provide microwave performance
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationInstallation Guidelines for Flygt Pumps Pump Anchoring Recommendations
Issued: Installation Guidelines for Flygt Pumps Pump Anchoring Recommendations Introduction Proper installation and anchorage of Flygt pumps and installation accessories is critical to limiting vibration
More informationMaterials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
More information