Product Data Sheet. NeoCryl A Delivery form: 42 % solids in water.
|
|
- Dwight Emory Robinson
- 5 years ago
- Views:
Transcription
1 is an acrylic copolymer emulsion designed for air dry and forced dry industrial coatings. can be formulated into economical coatings that exhibit an excellent balance of properties on metal, plastic and wood substrates. Delivery form: 42 % solids in water. Product characteristics Type - Acrylic emulsion Total solids, by volume, % - 40 % Weight per gallon 25 C lbs. as supplied Freeze/thaw stability - Keep from freezing Thermal stability - Satisfactory 52 C, one month Mechanical stability - Satisfactory Film properties/key Benefits - Block & Print Resistance - Adhesion to Plastics & Metals - Low VOC Demand - Very Fast Solvent Release - Rapid Hardness Development Recommendations for end-use - Suggested Markets: - General Metal & Plastic Coatings - DIY Flooring Product specifications Property Range Unit GAP Appearance Opaque liquid 0059 Total solids w/w % 0025 ph Visc. Brookfield 25 C mpa.s 0020 Sediment 1-1 max % 0005 Sediment straight max % Other product data Property Value Unit GAP MFFT 26 C 0011 Free monomer max ppm 0118 VOC (theoretical) none % Acid value (on solid) ± 45 mgkoh/g 0095 Preservative(s): BIT (casno ) % 0222 Test methods Test methods (GAP) referred to in the table(s) are available on request. Storage guidelines The resin should be stored indoors in original, unopened, undamaged container in a dry place at storage temperature between 5-40 C. Exposure to direct sunlight should be avoided. Shelf life Under above mentioned storage conditions, the shelf life of the resin will be 12 months ex work. Page 1 of 11 Material safety A Material Safety Data Sheet for this product is available on request.
2 Page 2 of 11
3 Formulating Information Formulation Description WB-5024 WB-4213 WB-2103 Gray Concrete Sealer Brushing Lacquer Low VOC Red Oxide Primer Market Decorative Architectural Clears Industrial Metal Additional Resin NeoRez R-9649 None None Solids, Wt. % VOC, g/l Additive Selection Component Type Supplier Solvents DPnP DPnB EB PNB DPM Dow Chemical Lyondell Chemical Coalescing Requirements: The addition of coalescing solvents to is required in order to form a good film. Usually 18-22% co-solvent, on resin solids is common for adequate film formation. Flow Agents BYK 345 BYK Chemie Triton CF-10 Dow Chemical Surfynol 104DPM Air Products Defoamers Nalco 2301 Nalco Chemical Co. Page 3 of 11 Byk 024 Byk Chemie Foamaster 111 Foamaster W-220 Cognis Corporation Patco 519 Patco 520 Birko Corp, Patco Additives Dispersants Tamol 165A Rohm & Haas BYK 156 Byk Chemie
4 Formulating Information Continued Component Type Supplier Thickeners Acrysol RM 825 Acrysol TT-615 Acrysol RM-2020 DSX-1514 Rohm & Haas Cognis Corporation Neutralizing Agent AMP 95 Angus Chemical Biocide Proxel GXL Arch Chemical Resin Compatibility, Industrial Formulations * Blends weight % on resin solids % / % secondary resin 25/75 50/50 75/25 NeoCryl A-601 Hazy Hazy Hazy NeoCryl A-612 Hazy (1) Hazy (1) Hazy (1) NeoCryl A-614 Hazy Hazy Hazy NeoCryl A-622 Clear Clear Clear NeoCryl A-633 Clear Clear Clear NeoCryl A-639 Clear Clear Clear NeoCryl A-655 Clear Clear Clear NeoCryl A-6037 Hazy (1) Hazy (1) Clear NeoRez R-940 Clear Hazy Slight Hazy (1) NeoRez R-9409 Clear Clear Slight Hazy NeoRez R-960 Hazy Slight Hazy Slight Hazy NeoRez R-962 Hazy Hazy Hazy (1) NeoRez R-967 Hazy Hazy Hazy (1) Gritty Film * Formulation WB-2004, Clear Gloss Lacquer for Metal Page 4 of 11
5 Resin Compatibility, Clear Wood Brushing Lacquer Formulating Information Continued Blends weight % on resin solids % / % secondary resin 30/70 70/30 NeoRez R-9637 Very Slight Haze Clear NeoRez R-9679 Very Slight Haze Slight Haze NeoRez R-9403 Clear Clear NeoPac TM R-9009 Slight Haze Slight Haze NeoPac TM E-106 Clear Clear Storage Precaution is known to react with the zinc in some grades of galvanized steel. The result can be a build-up of gel on the bulk tank inner walls and/or absolute solidification in the valves/plumbing. Stainless steel is the recommended storage material for. If your current storage system is galvanized steel, a one (1) week standing jar test with the specific grade (type) of galvanized to be used will be a reasonable indicator. Drying Notes Film Formation Clear Lacquer Drying Stage Set to touch Dry to touch Through dry Time 30 minutes 45 minutes 2 hrs. 30 minutes 3 mil wet draw down on Leneta 7B, 70 o F & 50% RH Page 5 of 11
6 Drying Notes Continued Recoat Time For Architectural Clears on wood substrates, three to four hours is recommended between coats for quickest development of final film properties in a multi-coat application. General Physical Performance Clear Films Durability: General Test Conditions Results Imprint Resistance Glass, 140 o F for 1 hour & 1 lb. for o F 3.5 Rating 1-5, 5 = Best Yellowness Index QUV aged, A bulbs, 1 week ASTM (4 on scale of 1-5, 5 = colourless) König Hardness Development Time König Osc 24 hours hours 66 1 week 89 3 mil wet films, glass, dried at room temperature Page 6 of 11
7 Performance Properties of Formulation WB-2005 Gloss White Lacquer Durability: Industrial Metal Test Conditions Results Gloss Hardness Pencil B König 59 Sward 28 Flexibility Conical Mandrel Passes Impact Resistance Direct, in-lbs. 40 Reverse, in-lbs. 4 Test, Adhesion Conditions Results Plastics Nylon 6,6 Noryl N 190 Noryl 1222 Noryl GTX-910 Noryl FN-215 Styron 6075 Styron 484 ABS KJW Metals B-1000 QD Brass Hot Dipped Galvanized Steel x Aluminum Page 7 of 11
8 Durability: Industrial Metal Continued Performance Properties of Formulation, WB-2005 Continued Salt Spray Resistance (B1000 panels, DFT, 168 hours) Description Face Scribe Results Rusting Trace, 9 Blistering Few, #6,8 Undercutting 1/16" Rust Bleed V. Slight Blistering MD, #4,6 Humidity Resistance B1000 panels DFT 168 hours Rusting V. Slight, #7 Blistering Dense, #8 Block Resistance 165 o F / 7 min. bake 140 o F / 2 psi / 1 hour block Hot Print Resistance 140 o F / 2 psi / 2 hours Page 8 of 11
9 NeoCryl A-6069 ph/viscosity Curve 1000 Viscosity, cps 100 Page 9 of ph
10 Durability: Clear Wood Lacquers Resistance Properties 3 coats brush applied, maple, air dry 7 days Household Chemical Resistance & NeoPac TM E /30* & NeoPac TM E /70* Water % Ethanol % IPA Fantastic Formula Windex Mustard Shoe Polish Rating 1-10, 10 = Best Rating is average of 1hr. on and 1hr. off Black Heel Mark Resistance BHMR Rating 1-5, 5 = Best * weight % on resin solids Page 10 of 11
11 Raw Material Suppliers Material Supplier Butyl Cellosolve Butyl Carbitol DPnB DPnP Triton CF-10 Acrysol TT-615 Acrysol RM-825 Patcote 519 Patcote 520 Dow Chemical Rohm & Haas Company Birko Corp., Patco Additives Nalco 2301 Foamaster 111 Foamaster W-220 PNB DPM BYK 345 BYK 024 BYK 156 Surfynol 104DPM AMP 95 Proxel GXL Nalco Chemical Company Cognis Corporation Lyondell Chemical BYK Chemie Air Products Angus Chemical Arch Chemical Page 11 of 11
Product Data Sheet. NeoCryl A-640. Delivery form: 40 % solids in water.
is an aqueous acrylic copolymer designed for coatings that require outstanding water and humidity resistance. Coatings formulated with exhibit high gloss, fast dry, and excellent adhesion to various substrates
More informationProduct Data Sheet. NeoCryl A-6099
is an aqueous low particle size acrylic copolymer designed for coatings that require hardness and corrosion resistance at low film thickness. is the resin of choice for quick hardness development and outstanding
More informationProduct Data Sheet. NeoCryl A-6075
is an aqueous acrylic copolymer emulsion designed for plastic coatings requiring exceptional chemical resistance properties. exhibits superior adhesion characteristics on a wide variety of plastic substrates,
More informationProduct Data Sheet. NeoCryl A-622
is an aqueous acrylic copolymer Delivery form: 32 % solids. which offers outstanding water and humidity resistance. is the resin of choice for high performance metal finishing, combining the fast dry characteristics
More informationProduct Data Sheet. NeoCryl A-6115
is a water-borne self-crosslinking acrylic copolymer which can be used to formulate clear and pigmented coatings for plastic substrates with a high degree of chemical resistance. can be formulated into
More informationProduct Data Sheet. NeoRez R-4000
is an aliphatic urethane hybrid especially designed for coatings which require exceptional chemical and stain resistance to conform to the automotive interior market. is versatile in use and performance.
More informationProduct Data Sheet. Crosslinker CX-100
is a 100% active polyfunctional aziridine liquid crosslinker. Addition of one to three percent to acrylic emulsions or waterborne urethane polymers produces a marked improvement in water, chemical, abrasion,
More informationProduct Data Sheet. NeoCryl BT-175
is a water borne alkali soluble acrylic copolymer that can be formulated into high performance flexographic and gravure inks which meet clear air regulations. When amine solubilized, can be used as a pigment
More informationProduct Data Sheet. Haloflex 202. Haloflex 202 is a vinyl/acrylic emulsion designed for maintenance primers, automotive underbody/under-hood
is a vinyl/acrylic emulsion designed for maintenance primers, automotive underbody/under-hood coatings, rust converting products, overprint varnishes, and for other coatings applications requiring excellent
More informationRayKote 2020 Typical Physical Properties* * These properties are typical, but do not constitute specifications
RayKote 2020 RayKote 2020 Technical Bulletin Styrene Acrylic Epoxy Hybrid Emulsion Polymer RayKote 2020 is a styrene acrylic epoxy hybrid polymer specifically designed for high performance, low VOC, industrial
More informationRHOPLEX WL-100 Emulsion Copolymer For High-Gloss Plastic Coatings With Excellent Adhesion
RHOPLEX WL-100 Emulsion Copolymer For High-Gloss Plastic Coatings With Excellent Adhesion Description RHOPLEX WL-100 resin is an acrylic-styrene copolymer designed for high-gloss, high-doi (Distinctness
More informationRhoplex WL-100 Emulsion Copolymer For High-Gloss Metal Coatings
Page 1 of 14 Rhoplex WL-100 Emulsion Copolymer For High-Gloss Metal Coatings Table of Contents Introduction Key Features Typical Physical Properties Formulating Starting Point Formulations 1.5 PVC Black
More informationHYBRIDUR 580 Polymer Dispersion
Epoxy Curing Agents and Modifiers HYBRIDUR 580 Polymer Dispersion DESCRIPTION Hybridur Polymer Dispersions are a line of anionically stabilized urethane-acrylic hybrid polymers from Evonik. These innovative
More informationEPS 2540 ACRYLIC EMULSION
ACRYLIC EMULSION DATA SHEET Description EPS 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development / gloss retention.
More informationRHOPLEX CL-204 Acrylic Emulsion For Factory-Applied, Clear Topcoats Over Wood With Print Resistance and Low Microfoam Entrapment
RHOPLEX CL-204 Acrylic Emulsion For Factory-Applied, Clear Topcoats Over Wood With Print Resistance and Low Microfoam Entrapment Description Certain waterborne acrylic emulsions, such as RHOPLEX CL-104,
More informationEPS 2510 STYRENATED ACRYLIC EMULSION
STYRENATED ACRYLIC EMULSION DATA SHEET Description EPS 2510 is a styrenated acrylic emulsion offering excellent early water and humidity resistance, as well as corrosion resistance. In addition, EPS 2510
More informationUROTUF F97-MPW-33. Waterborne Oil Modified Urethane. June Product Code
June 2007 UROTUF F97-MPW-33 Product Code 91293-00 Waterborne Oil Modified Urethane DESCRIPTION UROTUF F97-MPW-33 is a waterborne, oil modified urethane dispersion designed for single package, selfcrosslinking
More informationEPS 2535 ACRYLIC EMULSION
ACRYLIC EMULSION DATA SHEET Description EPS 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development / gloss retention.
More informationHybridur 870 Polymer Dispersion
Product Specification Hybridur 870 Polymer Dispersion DESCRIPTION Hybridur 870 polymer dispersion is an NMP-free (
More informationJONCRYL Self-Crosslinking Acrylic Emulsion
JONCRYL 1980 Excellent Chemical Resistance Good Scratch and Mar Resistance Cold Check Resistance Low Foaming JONCRYL 1980 Self-Crosslinking Acrylic Emulsion general information TYPICAL PHYSICAL CHARACTERISTICS*:
More informationCarboset 514H Acrylic Colloidal Dispersion TECHNICAL DATA SHEET
Carboset 514H Acrylic Colloidal Dispersion TECHNICAL DATA SHEET General Description Carboset 514H resin is an acrylic colloidal dispersion polymer supplied in ammonia water. Carboset 514H resin dries to
More informationHYBRIDUR 878 Polymer Dispersion
Epoxy Curing Agents and Modifiers HYBRIDUR 878 Polymer Dispersion DESCRIPTION Hybridur 878 polymer dispersion is an NMP-free (
More informationMAINCOTE HG-86 Acrylic Resin
Technical Data Sheet MAINCOTE HG-86 Acrylic Resin For High Gloss Maintenance Coatings. Regional Product Availability Description Asia-Pacific MAINCOTE HG-86 Acrylic Resin is a waterborne acrylic polymer
More informationRHOPLEX CL-106 Acrylic Emulsion For Factory-Applied Clear Topcoats on Wood With Excellent Hardness, Mar Resistance, and Clarity
RHOPLEX CL-106 Acrylic For Factory-Applied Clear Topcoats on Wood With Excellent Hardness, Mar Resistance, and Clarity Description RHOPLEX CL-106 acrylic emulsion has been designed for use in factory-applied
More informationMAINCOTE IC-1001 Resin
MAINCOTE IC-1001 Resin Waterborne acrylic resin for thermal insulation coatings Description Features and Benefits Typical Physical Properties MAINCOTE IC-1001 Resin is an acrylic-styrene copolymer with
More informationPermax V1000 Vinylidene Chloride Emulsion
Permax V1000 Vinylidene Chloride Emulsion PRODUCT DESCRIPTION Permax V1000 is an APE-free, low VOC, small particle size vinylidene chloride acrylate copolymer emulsion that displays extremely low moisture
More informationUROTUF F100-W-36. Waterborne Oil Modified Urethane. August Product Code DESCRIPTION
August 2008 UROTUF F100-W-36 Product Code 91795-00 Waterborne Oil Modified Urethane DESCRIPTION UROTUF F100-W-36 is an anionic stabilized dispersion of an oil modified urethane polymer provided at 37%
More informationKAMICRYL PR SERIES Resin Waterborne Acrylic Resin for Industrial Coatings
KAMICRYL PR SERIES Resin Waterborne Acrylic Resin for Industrial Coatings Description Features and Benefits KAMICRYL PR SERIES Resin is an aqueous acrylic emulsion polymer based on KAMICRYL PR SERIESAcrylicResin
More informationUROTUF F97-MPW-33. Waterborne Oil Modified Urethane. February Product Code DESCRIPTION
DESCRIPTION February 2012 UROTUF F97-MPW-33 Product Code 91293-00 Waterborne Oil Modified Urethane UROTUF F97-MPW-33 is a waterborne, oil modified urethane dispersion designed for single package, selfcrosslinking
More informationUROTUF F100-W-36 Product Code: Waterborne Oil Modified Urethane
April 2010 UROTUF F100-W-36 Product Code: 91795-00 Waterborne Oil Modified Urethane DESCRIPTION UROTUF F100-W-36 is an anionic stabilized dispersion of an oil modified urethane polymer provided at 36%
More informationCarboset CR-785 Acrylic Copolymer Latex TECHNICAL DATA SHEET
Acrylic Copolymer Latex TECHNICAL DATA SHEET General Description Carboset CR-785 is an acrylic copolymer latex designed for air or forced dry coatings on wood, metal and plastic substrates. Carboset CR-785
More informationPARALOID WR-97 Water-Reducible Acrylic Resin
PARALOID WR-97 Water-Reducible Acrylic Resin Description PARALOID WR-97 water-reducible acrylic solution resin can be crosslinked with urea and melamine resins to produce general purpose industrial coatings.
More informationPARALOID AU-2100 (81.0%) Methyl amyl ketone Disperbyk Sub-totals
PARALOID AU-2100 Product Description PARALOID Resin AU-2100 is a new acrylic polyol for use in low VOC (
More informationAROFLINT 810 Product Code: Acid Functional Polyester for Two-Package Polyester Epoxy Systems
April 2010 AROFLINT 810 Product Code: 91859-00 Acid Functional Polyester for Two-Package Polyester Epoxy Systems DESCRIPTION AROFLINT 810 is an acid functional polyester resin supplied at 70% solids in
More informationUROTUF F97-MPW-33 Product Code: Water-borne Oil Modified Urethane
November 2015 UROTUF F97-MPW-33 Product Code: 91293-00 Water-borne Oil Modified Urethane DESCRIPTION UROTUF F97-MPW-33 is a water-borne, oil modified urethane dispersion designed for single package, selfcrosslinking
More informationCarboset PL-958 Acrylic Copolymer Emulsion TECHNICAL DATA SHEET
Acrylic Copolymer Emulsion TECHNICAL DATA SHEET General Description Carboset PL-958 is an acrylic copolymer emulsion designed for clear or pigmented temporary peelable coating applications. Carboset PL-958
More informationPROSPERSE 704 Acrylic Polyurethane Polymer For Industrial Coatings
Technical Data Sheet PROSPERSE 704 Acrylic Polyurethane Polymer For Industrial Coatings Description PROSPERSE 704 is an aqueous acrylic polyurethane polymer based on DESIGNED DIFFUSION Resin Technology,
More informationNextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431)
NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431) 1 Waterborne Coatings Sustainability & Product Innovation We take an integrated business approach to sustainability
More informationANCAMIDE 2634 Curing Agent
Epoxy Curing Agents and Modifiers ANCAMIDE 2634 Curing Agent DESCRIPTION Ancamide 2634 is a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance
More informationCORLAR 2.1 ST SATIN HIGH SOLIDS EPOXY MASTIC (formerly Corlar 25P )
SATIN HIGH SOLIDS EPOXY MASTIC (formerly Corlar 25P ) Corlar 2.1 ST is a satin gloss, high build epoxy mastic, two-package, VOC conforming product (2.1 lbs/gal) based on DuPont amido amine modified polyamide
More informationENCOR 631 High Performance Acrylic Latex for Architectural Coatings
ARKEMA COATING RESINS High Performance Acrylic Latex for Architectural Coatings Product Description Polymer Design Performance Benefits Typical Properties 2 ENCOR 631 is a high performance 1% acrylic latex
More informationROSHIELD 3275 Hydroxyl Functional High-Performance Acrylic Emulsion for Wood Coatings
ROSHIELD 3275 Hydroxyl Functional High-Performance Acrylic Emulsion for Wood Coatings Description ROSHIELD 3275 acrylic emulsion is specifically designed for reaction with polyisocyanates, such as Bayer
More informationEPOTUF Product Code: Epoxy Resin Solution
April 2001 EPOTUF 38-505 Product Code: 38505-00 Epoxy Resin Solution DESCRIPTION EPOTUF 38-505 is a solvent cut of EPOTUF 37-001 at 75% solids in xylene. APPLICATIONS High performance two-package systems
More informationA Family of Waterbased Acrylics based on a Unique Self-Crosslinking Mechanism. Mr. Dana Charron Wood Symposium September 2018
A Family of Waterbased Acrylics based on a Unique Self-Crosslinking Mechanism Mr. Dana Charron Wood Symposium September 2018 Overview of the Presentation History of Interpolymer Acrylic Development Self-Crosslinking
More informationEPS 2526 ACRYLIC EMULSION
ACRYLIC EMULSION DATA SHEET Description EPS 2526 is a styrenated acrylic emulsion offering excellent hardness and wet / dry film clarity. EPS 2526 is well suited for use in clear and pigmented finishes
More informationRhoplex Multilobe % Acrylic Binder
Rhoplex Multilobe 400 100% Acrylic Binder Rhoplex Multilobe 400 emulsion polymer represents Rohm and Haas Company s progress in design of an APEO (alkyl phenol ethoxylate) surfactant free binder for low-voc
More informationMaincote TM AE-58/ProSperse TM 3001 Acrylic Epoxy
Technical Data Sheet Maincote TM AE-58/ProSperse TM 3001 Acrylic Epoxy For Waterborne 2K Light Duty Maintenance and Institutional Coatings Regional Product Availability Description Features and Benefits
More informationEPOTUF Product Code: Epoxy Resin Solution
July 2015 EPOTUF 38-505 Product Code: 38505-00 Epoxy Resin Solution DESCRIPTION EPOTUF 38-505 is a solvent cut solid Bis-A epoxy resin supplied at 75% solids in xylene. APPLICATIONS High performance two-package
More informationMAINCOTE 1100A Emulsion Advanced Resin for Industrial Coatings based on AVANSE Technology Platform
Technical Data Sheet MAINCOTE 1100A Emulsion Advanced Resin for Industrial Coatings based on AVANSE Technology Platform Regional Product Availability Description Key Features Benefits Asia-Pacific MAINCOTE
More informationProduct Information. What is the resin's nature? Economic, multi-phase, self-crosslinking acrylic dispersion for single- / two-pack coatings.
What is the resin's nature? Economic, multi-phase, self-crosslinking acrylic dispersion for single- / two-pack coatings. Technical data: Solids content: 47-49% ph-value: 7. - 8. Viscosity: 2,000-4,000
More information3,Rothwell Street, Timaru, South Canterbury. ; : Phone or
ECO-SEAL 100 3,Rothwell Street, Timaru, South Canterbury Email; ideaslab64@gmail.com : Phone +64 3 688 5508 or 0275 239888 Two Pack Flexible Self Priming high hysteresis waterproofing membrane designed
More informationRHOPLEX MV-23LO Emulsion Copolymer For Wood Primers and Stain Blocking Sealers
Technical Data Sheet RHOPLEX MV-23LO Emulsion Copolymer For Wood Primers and Stain Blocking Sealers Introduction Benefits Exterior Performance Typical Physical Properties 1 RHOPLEX MV-23LO Emulsion Copolymer
More informationRHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints
Technical Data Sheet RHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints Introduction RHOPLEX SG-10M Acrylic Emulsion is a versatile 100% copolymer that was designed for use
More informationRHOPLEX EP-6060 Acrylic Polymer For Factory-Applied Wood Coatings
Technical Data Sheet RHOPLEX EP-6060 Acrylic Polymer For Factory-Applied Wood Coatings Introduction Features Typical Physical Properties 1 RHOPLEX EP-6060 Acrylic Polymer is recommended for factory-applied
More informationRHOPLEX WL-96 Waterborne Acrylic Polymer For Low VOC Interior Clear Wood Finishes
Technical Data Sheet RHOPLEX WL-96 Waterborne Acrylic Polymer For Low VOC Interior Clear Wood Finishes Introduction RHOPLEX WL-96 Waterborne Acrylic Polymer is a binder that can be used for low-voc, brush-applied,
More informationRHOPLEX MULTILOBE 400 Emulsion Polymer
Technical Data Sheet MULTILOBE 400 Emulsion Polymer For Architectural Coating Applications, (APEO-Free, Low-VOC, Exterior Flat & Satin Paints) Regional Product Availability Description North America MULTILOBE
More informationReactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings
Reactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings Christopher Letko, John Argyropoulos, Amber Stephenson Technical Contact: CSLetko@dow.com Marketing Contact: ALWatkins@dow.com
More informationPolyether solution in water
DSX 3220 Use Composition DSX 3220 is a solvent-free, VOC-free, low odor associative thickener specifically designed to give Newtonian rheology profile and excellent balance of performance properties to
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators
Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators GENERAL DESCRIPTION A high solids, two component, high build, VOC conforming (2.1 lbs./gal.) Low HAPS
More informationSECTION 1045 PAINT FOR STRUCTURAL STEEL
SECTION 1045 PAINT FOR STRUCTURAL STEEL 1045.1 Paint and Paint Material. 1045.1.1 General. All single component paints shall be ready-mixed at the factory to comply with the specification formula for the
More informationCorlar 2.8 HG High Solids Epoxy
Corlar 2.8 HG High Solids Epoxy GENERAL DESCRIPTION A high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based on Axalta modified polyamide epoxy technology. The resulting
More informationRHOPLEX TP-257 Polymer Emulsion for Waterborne Traffic Marking Paints
Technical Data Sheet RHOPLEX TP-257 Polymer Emulsion for Waterborne Traffic Marking Paints Regional Product Availability Description Advantages of Paints Based on RHOPLEX TP-257 North America RHOPLEX TP-257
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer
Corlar 2.1 PR-P High Solids Productive Epoxy Primer GENERAL DESCRIPTION A high solids, two component, VOC conforming (2.1 lbs./gal.) Low HAPS productive primer based on Axalta modified polyamide epoxy
More informationANCAMIDE 221 Curing Agent
Epoxy Curing Agents and Modifiers ANCAMIDE 221 Curing Agent DESCRIPTION Ancamide 221 curing agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based
More informationAR555 Waterborne Epoxy Resin
Epoxy Curing Agents and Modifiers ANCAREZ TM AR555 Waterborne Epoxy Resin DESCRIPTION Ancarez AR555 resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for
More informationEpoxy Curing Agents and Modifiers. Ancamide 221 Curing Agent Technical Data Sheet
Epoxy Curing Agents and Modifiers Ancamide 221 Curing Agent Technical Data Sheet Description Ancamide 221 curing agent is a member of a new series of reactive polyamides developed for use in the curing
More informationGrey, pourable liquid with slight gel Slight ammonia odor Specific Gravity: 1.34
NOX-RUST R-576-95 Description NOX-RUST R-576-95 is a zero V.O.C., ambient cure coating formulated to provide an abrasion resistant film that has similar performance properties to the current P.V.C. used
More informationUltra-Low VOC Waterborne Alkyd Coatings for Metal Protection
Ultra-Low VOC Waterborne Alkyd Coatings for Metal Protection Erin Vogel, Ph.D. Research Scientist Industrial Coatings R&D, Dow Coating Materials Dow Chemical Company April 13, 2016 1 Agenda Alkyd Overview
More informationRHOPLEX EI-3500 Polymer Emulsion for Fast-Setting Textured Finishes
RHOPLEX EI-3500 Polymer Emulsion for Fast-Setting Textured Finishes Description RHOPLEX EI-3500 emulsion is an all-acrylic waterborne polymer providing fast-set characteristics for textured finishes, especially
More informationOUDRACure WB 8002 Waterborne Epoxy Curing Agent
Technical Data Sheet OUDRACure WB 8002 Waterborne Epoxy Curing Agent Description Aqueous polyamine adduct designed to work with Type 1 epoxy dispersions for maintenance and protective coatings for concrete
More informationANCAMIDE 2634 Curing Agent
Epoxy Curing Agents and Modifiers ANCAMIDE 2634 Curing Agent DESCRIPTION Ancamide 2634 is a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance
More informationMAINCOTE 1071 Emulsion
Technical Data Sheet MAINCOTE 1071 Emulsion Water based styrene acrylic emulsion Regional Product Availability EMEA Product Description Application MAINCOTE 1071 is a versatile water based styrene acrylic
More informationEPOTUF Product Code: Aliphatic Amidoamine Curing Agent
January 2001 EPOTUF 37-620 Product Code: 37620-00 Aliphatic Amidoamine Curing Agent DESCRIPTION EPOTUF 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF epoxy
More informationEPOTUF Product Code: Aliphatic Amidoamine Curing Agent
April 2017 EPOTUF 37-620 Product Code: 37620-00 Aliphatic Amidoamine Curing Agent DESCRIPTION EPOTUF 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF epoxy
More informationCarboset AE-960 Acrylic Emulsion
Carboset AE-960 Acrylic Emulsion TECHNICAL DATA SHEET DESCRIPTION Lubrizol Carboset AE-960 is a high solids, water based 100% acrylic emulsion specifically developed for elastomeric vertical masonry coatings.
More informationGanicin 2.8 ZR-E Zinc-Rich Epoxy Primer
Ganicin 2.8 ZR-E Zinc-Rich Epoxy Primer GENERAL DESCRIPTION A three-package, VOC conforming (2.8 lbs/gal) low HAPS, zinc-rich epoxy primer based on Axalta epoxy amine technology. The resulting organic
More informationVersamid 280 B-75. Technical Data Sheet. Properties. Applications. Product Description or liquid epoxy resins.
Technical Data Sheet Versamid 280 B-75 Product Description Key Features & Benefits Chemical Composition Versamid 280 B-75 is a polyamide/epoxy adduct in n-butanol designed for reaction with solid or liquid
More informationROCK-IT LINER TM TECHNICAL DATA SHEET
ROCK-IT LINER TM TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rock-It Liner is a high quality urethane textured coating that provides a durable protective finish for truckbeds and restoration projects.
More informationSpecial Coating. // BU COATINGS Product Selector // 04.14
Special Coating // BU COATINGS Product Selector // 04.14 LAMBERTI S POLYURETHANE, A GREEN TECHNOLOGY Lamberti s waterborne polyurethane dispersions offer high value performance, innovative solutions, as
More informationOUDRASperse WB 4001 Waterborne Epoxy Dispersion
Technical Data Sheet OUDRASperse WB 4001 Waterborne Epoxy Dispersion Description OUDRASperse WB 4001 is waterborne dispersion of an epoxy novolac resin (f=3.6), being manufactured without the use of solvent.
More informationProduct Information. What is the resin's nature? Solvent-free, aliphatic polyester polyurethane/acrylic hybrid dispersion.
Alberdingk APU 112 What is the resin's nature? Solvent-free, aliphatic polyester polyurethane/acrylic hybrid dispersion. Technical data: Solids content: 44-46% ph-value: 7. - 8.5 Viscosity: 2-2 mpas MFFT:
More informationHEAT-FLEX HI-TEMP 1200 Coating Under Insulation
INTRODUCTION Heat-Flex Hi-Temp 1200 is the industries next generation, single component inert multipolymetric matrix coating for use on high temperature steel up to 650ºC (1200ºF) Designed to protect insulated
More informationHVAC Antimicrobial Protected Coatings
HVAC Antimicrobial Protected Coatings Introduction to Shop Applied Coating Technology HVAC Heating, Ventilation, and Air Conditioning Then & Now Although HVAC technology is one of the most practical advantages
More informationCarboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Cycloaliphatic Amine Epoxy Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial
More informationImron 1.5 PR Waterborne Polyurethane Primer
Imron 1.5 PR Waterborne Polyurethane Primer GENERAL DESCRIPTION An isocyanate-free, single component, VOC conforming (1.5 lbs/gal), zero HAPs primer based on unique Axalta waterborne polyurethane copolymer
More informationMAINCOTE HG-54D Waterborne Acrylic Resin For Corrosion-Resistant Primers and High-Gloss Topcoats
Technical Data Sheet MAINCOTE HG-54D Waterborne Acrylic Resin For Corrosion-Resistant Primers and High-Gloss Topcoats Introduction MAINCOTE HG-54D Acrylic Resin has established the performance standard
More informationSNAP 728 For Architectural Coatings Applications
ARKEMA COATING RESINS SNAP 728 Product Benefits Polymer Design Performance Benefits Typical Physical Properties Latex SNAP 728 is a structured nano-acrylic polymer for satin to high gloss sheen coatings
More informationQUAKER COLOR. DIVISION OF McADOO & ALLEN, INC.
Technical Data Sheet Product Code: PR-1470 Experimental PUD DESCRIPTION PR-1470 is NMP free, high gloss, hydrophobic high performance aliphatic urethane dispersion with excellent adhesion to metal substrates.
More informationANCAMIDE 351A Curing Agent
Epoxy Curing Agents and Modifiers ANCAMIDE 351A Curing Agent DESCRIPTION 351A curing agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings
More informationGULF COAST PAINT MFG., INC
MCU-100 PRIMER/FINISH MOISTURE CURED URETHANE ALUMINUM COATING PRODUCT DESCRIPTION A one component, Moisture Cured Polyurethane Aluminum Coating. Has excellent adhesion to sound, tightly adherent rusty
More informationA Novel Amine Neutralizer
AS SEEN IN Paint Coatings Industry Globally Serving Liquid and Powder Manufacturers and Formulators A Novel for Waterborne Industrial and Automotive Coatings By Dr. Chunzhao Li, Senior Research Chemist,
More informationGanicin 2.8 ZR- U Zinc-Rich Polyurethane Primer
Ganicin 2.8 ZR- U Zinc-Rich Polyurethane Primer GENERAL DESCRIPTION A three-package, VOC conforming (2.8 lbs/gal) low HAPS, zinc-rich urethane primer based on Axalta polyurethane technology. The resulting
More informationIntegral Fuel Tank Coating
Technical Data Sheet Product Group Fuel tank coating Characteristics Product Information - A two-component coating developed as a secondary fuel vapor barrier coating for integral fuel tanks. May be applied
More informationInnovative Amine Curing agent for Epoxy Resins New Water-reducible Curing Agent for Civil Engineering g & Concrete Coatings
Innovative Amine Curing agent for Epoxy Resins New Water-reducible Curing Agent for Civil Engineering g & Concrete Coatings Presented at a meeting of the Thermoset Resin Formulators Association at the
More informationTRUCKBED LINER TECHNICAL DATA SHEET
TRUCKBED LINER TECHNICAL DATA SHEET DESCRIPTION Truckbed Liner is a two component, urethane, textured coating that provides superior adhesion, film build and flexibility to truckbeds and restoration projects.
More informationOUDRASperse WB 3001 Waterborne Epoxy Dispersion
Technical Data Sheet OUDRASperse WB 3001 Waterborne Epoxy Dispersion Description OUDRASperse WB 3001 is a waterborne dispersion of a liquid epoxy resin, being manufactured without added solvent. It is
More informationPAINTS AND ENAMELS. Package the paint in new containers marked with the following information:
PAINTS AND ENAMELS 3501 BASIC REQUIREMENTS FOR PAINTS 3501.1 SCOPE Provide paints for construction and maintenance. 3501.2 REQUIREMENTS A Package Stability Ensure the paint does not cake, liver, thicken,
More informationTechnical Data Sheet Product Aqua EC 5500
Technical Data Sheet Product Aqua EC 5500 Description: This cathodic clear coat system based on acrylic resin is specially developed to coat decorative surfaces and can be applied from 5 microns to 30
More informationROCK-IT XC TECHNICAL DATA SHEET
ROCK-IT XC TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rock-It XC is a high quality, urethane, textured coating that provides a durable, chemical and fade resistant, protective finish for truck beds,
More information