Turning Chip Breakers
|
|
- Christiana Richard
- 5 years ago
- Views:
Transcription
1 Chip reakers Materials : 1010, 1015, 1025, 8615, 5120, 4130 Hardness : under 180H P Steel C/ ~ ~ ~ ~ ~ ~ VL V VC HA HR ~ ~ ~ VH ~ (General) ~ VT ~ (High feed ting) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ p. 20 p. 25 p. 31 p. 38 p. 43 p. 46 p. 20 p. 25 p. 32 p. 43 p. 46 p. 20 p. 25 p. 38 p. 46 p. 20 p. 25 p. 31 p. 38 p. 43 p. 46 p. 19 p. 24 p. 30 p. 37 p. 42 p. 45 p. 21 p. 25 p. 32 p. 44 p. 47 p. 19 p. 22 p. 33 p. 24 p. 31 p. 38 p. 33 p. 33 p. 45 4
2 Chip reakers Materials : 1010, 1015, 1025, 8615, 5120, 4130 Hardness : under 180H P Steel C/ ~ ~ VL ~ ~ CCMT DCMT SCMT TC(P)MT VC()MT p. 50 p. 53 p. 55 p. 65 p. 50 p. 53 p. 55 p. 45 HMP 792 p. 50 p. 53 p. 55 p p. 50 p. 54 p. 55 5
3 Chip reakers Materials : 1045, 1049, 4140, 1522 Hardness : under 180~260H P Steel C/ ~ ~ Medium to ~ ~ ~ V VC HR ~ VH ~ (General) ~ VT ~ (High feed ting) ~ ~ ~ ~ ~ ~ ~ ~ ~ CN ~ ~ p. 20 p. 25 p. 32 p. 43 p. 47 p. 20 p. 25 p. 38 p. 46 p. 19 p. 22 p. 31 p. 33 p. 20 p. 25 p. 31 p. 38 p. 43 p. 47 p. 21 p. 22 p. 25 p. 24 p. 32 p. 33 p. 38 p. 44 p. 47 p. 46 ~ Finishing ~ VL HFP ~ ~ p. 50 p. 53 p. 55 p. 65 p. 50 p. 53 p. 55 p. 64 CCG(M)T DCG(M)T SCG(M)T TCG(M)T VCG(M)T p. 50 p. 53 p. 55 p. 50 p. 54 p. 55 p. 64 6
4 Chip reakers Materials : 4320, 4340, 5140, F2, D3, 4140, Hardened steel Hardness : 260~350H P Steel C/ ~ ~ V VC Medium to ~ ~ HR ~ ~ ~ (General) ~ ~ (High feed ting) ~ Finishing ~ VH VT VL HFP ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ CN ~ ~ p. 20 p. 25 p. 32 p. 43 p. 47 p. 20 p. 25 p. 38 p. 46 p. 19 p. 22 p. 31 p. 33 p. 20 p. 25 p. 31 p. 38 p. 43 p. 47 p. 21 p. 22 p. 25 p. 24 p. 32 CCMT DCMT SCMT p. 50 p. 33 p. 38 TC(P)MT 39 p. 44 VC()MT p CCG(M)T DCG(M)T SCG(M)T TCG(M)T VCG(M)T p. 50 p. 50 p. 53 p. 53 p. 54 p p. 50 p. 53 p. 55 p. 64 p. 55 p. 55 p. 64 p. 47 p. 46 7
5 Chip reakers Materials : 304, 316, 430, 630 Ferrite, austenite, martensite, precipitation hardening stainless steels Hardness : 135~300H M Stainless steel C/ ~ ~ ~ Medium to ~ Medium HS VP2 VP3 ~ p. 20 p. 24 p. 31 p. 38 p. 42 p. 46 p. 21 p. 25 p. 32 p. 44 p. 47 p. 21 p. 21 p. 26 p. 26 p. 32 p. 32 p. 43 p. 48 p. 48 ~ HMP ~ ~ p. 50 p. 53 p. 55 p. 65 p. 50 p. 53 p. 55 p. 50 p. 54 p. 55 p. 65 8
6 Chip reakers Materials : No208, No55, , , etc : Gray cast iron, Ductile cast iron Hardness : 135 ~185H Tensile strength : 450N/mm 2 K Cast iron C/ ~ ~ ~ ~ ~ heavy C/ None 25 GR VK GH ~ ~ ~ ~ ~ ~ ~ ~ ~ K410 K350 K370 ~ ~ 0 0 ~ 0 ~ 1485 ~ 1155 ~ 1320~1485 ~1320 ~ 1485~ ~1485 ~ 1485~ ~1485 ~ 1485~ ~1485 ~ CNMA DNMA SNMA TNMA p. 18 p. 23 p. 29 p. 36 p. 18 p. 23 p. 29 p. 19 p. 23 p. 30 p. 36 p. 21 p. 25 p. 32 p. 44 p. 47 p. 37 p. 45 p. 45 p. 22 p. 26 p. 33 p. 40 p. 44 p. 48 p. 22 p. 33 HMP p. 50 p. 53 p. 55 p. 50 p. 54 p. 55 p. 65 9
7 Chip reakers Materials : Aluminum alloy Hardness : 20~110H N Aluminum alloy C/ ~ HA ~ 0 p. 19 p. 24 p. 30 p. 37 p. 42 p. 45 Materials : Copper ronze alloy Hardness : 20~110H ~ CCGT CCGT DCGT DCGT machinin AK AR HA C/ ~ ~ ND1000 PD1000 ND1000 PD1000 SCGT SCGT TCGT TCGT VCGT VCGT RCGT p. 68 p. 69 p. 71 p. 72 p. 73 p. 70 RCGT p. 68 p. 69 p. 71 p. 72 p. 73 p. 70 p. 19 p. 24 p. 30 p. 37 p. 42 p. 45 N Aluminum alloy machinin AK AR ~ ~ ~0.016 CCGT DCGT SCGT TCGT VCGT RCGT p. 68 p. 69 p. 71 p. 72 p. 73 p. 70 CCGT DCGT SCGT TCGT VCGT RCGT p. 68 p. 69 p. 71 p. 72 p. 73 p
8 Chip reakers Materials : Inconel, Nimonic, Stellite, Ti alloy Hardness : 160~350H S Heat resistant alloy C/ ~ ~ ~ ~ ~ Finishing Medium to ~ Medium GS VP1 VP2 VP3 ~ ~ ~ ~ ~ p. 19 p. 24 p. 30 p. 37 p. 45 p. 21 p. 25 p. 32 p. 44 p. 47 p. 21 p. 26 p. 21 p. 21 p. 26 p. 26 p. 32 p. 32 p. 43 p. 48 p. 48 ~ HFP HMP ~ ~ ~ 198 CCG(M)T DCG(M)T SCG(M)T TCG(M)T VCG(M)T p. 50 p. 50 p. 53 p. 53 p. 55 p. 55 p. 50 p. 54 p. 55 p. 65 p
Recommended Cutting Parameters
CBN insert PCD insert Thermostability/ 700-800 Thermostability( ) 700-800 Compression Strenth/Mpa 600-1100 Compression Strenth/Mpa 500-800 Kc/ 9. 0 Kc/ 9.0 Hardness HV8000 Hardness HV3500-5000 K/[W/m*k]
More informationCARBIDE GRADE SELECTION/APPLICATION GUIDE
/ INSERTS / TECHNICHAL INFORMATION CARBIDE GRADE SELECTION/APPLICATION GUIDE Steels P Steels ISO P50 P40 P30 P20 P10 P01 Typical ailure modes Fracture Chipping Deormation Chipping Deormation Crater Deormation
More informationI N S E R T S N E G AT I V E T U R N I N G
I N S E R T S N E G AT I V E T U R N I N G CNMA 143 CNMG 143 CNMG.14 143 CNMG.65 143 CNMG.66 143 CNMG.78 144 CNMG.DM 144 CNMG.F 144 CNMG.M 144 CNMG.R 144 CNMG.WF 145 CNMG.WM 145 CNMM.81 145 CNMM.91 145
More informationTurning Tools & Inserts
Turning Tools & Inserts Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD i Leitz Metalworking Technology Group Under the name LMT Leitz Metalworking Technology Group the
More informationGRADE ADDITION FOR CAST IRON TURNING
IO Class K20-K35 Available s Positive: CCMT, DCMT, CMT Negative: CNMA, CNMG, DNMG, NMG, TNMA, TNMG, VNMG, WNMG Chip Breakers Common tyle MT RT KT Flat Top GRADE ADDITION FOR CAT IRON TURNING Ingersoll
More informationNew FM Chip Breaker for Positive ISO Turning Inserts
hapes CCMT DCMT CMT TCMT VBMT / VCMT Corner Radii.008,.016,.031,.047 Grades Cermet (, ) CVD Coated (,, ) PVD Coated (, ) Feed Rate Range.003-.010 ipr Depth of Cut Range.020 -.100 (per side) New FM Chip
More informationGrade, New Generation Inserts for Gray Cast Iron and Ductile Cast Iron Machining
1/5, New Generation Inserts for Gray Cast Iron and Ductile Cast Iron Machining 2/5, new generation inserts for gray cast iron and ductile cast iron machining With its innovative and creative technology,
More informationI N S E R T S N E G AT I V E T U R N I N G
I N S E R T S N E G AT I V E T U R N I N G CNMA 143 CNMG 143 CNMG.14 143 CNMG.65 143 CNMG.66 143 CNMG.78 144 CNMG.DM 144 CNMG.F 144 CNMG.M 144 CNMG.R 144 CNMG.WF 145 CNMG.WM 145 CNMM.81 145 CNMM.91 145
More informationHyperCoat CTCP115 / CTCP125
HyperCoat CTCP115 / CTCP125 E CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT - our solutions
More informationCEC. Cutting Edge Carbide STANDARD ISO TURNING INSERTS
STANDARD ISO TURNING INSERTS Content Technological avantage, cutomer benefit enomination Chip groove geometrie Inexable inert Turning grae overview Technical hint Machining example Sale organiation 3 4
More informationMK / RK Chip Breaker. Turning Solution for Cast Iron NC6315. MK Chip Breaker. RK Chip Breaker
MK / Chip Breaker MK Chip Breaker (For medium ) Turning Solution for Cast Iron Advanced turning solution for cast iron under high speed, high feed, and interrupted conditions Higher Wear and Chipping Resistance
More informationAlTiN Coated. UN Thread Internal & External. Length. # of Flutes
UN Thread UN Thread Internal & External 2-56.065.125 2 3 1/8 RM20099 4-40.085.180 2 3 1/8 RM20100 6-32.100.218 2 3 1/8 RM20101 8-32.115.250 2 3 1/8 RM20103 8-36.115.250 2 3 1/8 RM20105 10-24.120.312 2
More informationNew CVD Coated Carbide. Gray and Nodular Cast Iron. for Gray and Nodular Cast Iron. New Bright Black (BB) Coating Technology
for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide Improved coating
More informationSandvik Hyperion Metal Cutting. Insert Blanks and Strips
Sandvik Hyperion Metal Cutting Insert Blanks and Strips Table of contents Page Insert Blanks 03 Rhombic 80 indexable insert blanks - CNMA Rhombic 55 indexable insert blanks - DNMA Square indexable insert
More informationCBN / Diamond Coated Carbide
CBN / Diamond Coated Carbide CBN CBN Style Applications Typical parts Turning hardened steel Single or Multi tipped Multi tipped Rough & Finish turning gray iron Hardened steel (Continuous - Interruption)
More informationInsert Styles Positive CCMT, DCMT, RCMT, SCMT, TCMT, TPMR, VBMT Negative CNMA/CNMG, DNMA/DNMG, HNMG, SNMA/SNMG, TNMA/TNMG, VNMG, WNMA/WNMG
New Turning s for Gray and Ductile Cast Iron s - Maximum wear resistance in gray and ductile cast iron - General purpose applications in gray and ductile cast iron. Suit able for continuous to interrupted
More informationCutting Speed Vc [M/min] Hardness
HPD METRIC Non-alloyed steels, 1213, 13L13, 12, Cast steels Free-machining steels 12L14,1118 etc Low-alloyed steels, Cast steels(
More informationMILLING End milling cutters with fixed cutting edges. Cx45
MILLING End milling cutters with fixed cutting edges 39 OptiMill -Uni-HPC Short design M3090 Milling cutter diameter: 3,00-20,00 mm Special features: Unequal spacing Groove milling and general applications
More informationNEW ANSI BORING BAR PROGRAM
NEW ANSI BORING BAR PROGRAM STEEL q CARBIDE q CARBIDE WITH COOLANT q INSERTS 2011 TABLE OF CONTENTS PAGE TABLE OF CONTENTS 1 NOMENCLATURE 2 INSERTS 3 CUTTING DATA 3-5 BORING BARS ORDERING INFORMATION MIN
More informationCermets. Machining the bright way
Cermets Machining the bright way Advantages of cermets Cermets because...... optimum surface finishes are attainable h6... close manufacturing tolerances can be maintained KUNO Time... with correct application
More informationOctober /10. Improved, New Grades and Chip Breakers for Machining Heat Resistant Super Alloys
October 2018 1/10 Improved, New Grades and Chip Breakers for Machining Heat Resistant uper Alloys 2/10 KEY POINT TaeguTec s new grades and chip breakers for heat resistant super alloys (HRA). TT3010 and
More informationHyperCoat-C turning inserts
HyperCoat-C turning inserts CERATIZIT HyperCoat CERATIZIT HyperCoat is synonymous with the extraordinary and particular. HyperCoat is a milestone in coating technology. Based on more than 25 years of know-how,
More informationRose Gold Color Coated Carbide for Highly Stable Cast Iron Machining
New CVD Coated Carbides for Cast Iron New CVD Coated Carbides for Cast Iron Rose Gold Color Coated Carbide for Highly Stable Cast Iron Machining Improved coating adhesion prevents chipping and provides
More informationhigher performance! longer tool life! Phone Fax
Sister Company www.tooldh.com dh0944@hanmail.net Phone. +82.31.66945 Fax. +82.31.667.0944 Product : Natural,Synthetic Diamond Tools / PCD / Tungsten Carbide Designed by Zaim graphics 02 545 4363 higher
More informationLAMINA TECHNOLOGIES PRODUCT CATALOG TABLE OF CONTENTS INTRODUCTION 2 TURNING 7 ALU TURNING 41 PARTING AND GROOVING 47 THREAD TURNING 53
PRODUCT LINE 2017-2018 LAMINA TECHNOLOGIES PRODUCT CATALOG 2017-2018 TABLE OF CONTENTS INTRODUCTION 2 TURNING 7 ALU TURNING 41 PARTING AND GROOVING 47 THREAD TURNING 53 MILLING 63 FACE MILLING 69 SHOULDER
More informationSandvik Hyperion Metal Cutting. Gear Cutting Applications
Sandvik Hyperion Metal Cutting Gear Cutting Applications Hob Blanks Standard Hob blanks available with 12 teeth or 15 teeth configuration. Sandvik Hyperion Benefits: Reduction in EDM wire cutting - reduces
More informationCoated Carbide for Highly Stable Cast Iron Machining
CA3-Series CVD Coated Carbide for Cast Iron Coated Carbide for Highly Stable Cast Iron Machining Improved Coating Adhesion Prevents Chipping and Provides Stable Machining Micro TiCN Coating Provides Excellent
More informationrepresentations, warranties or conditions of any kind, express or implied. Last updated on 11/17/2015
Selection Guide The information provided here was gathered from published literatures and other resources. It is intended to be used for informational purpose only. We DID NOT test all the metals listed
More informationRose Gold Color Coated Carbide for Highly Stable Cast Iron Machining
New CVD Coated Carbides for Cast Iron New CVD Coated Carbides for Cast Iron Rose Gold Color Coated Carbide for Highly Stable Cast Iron Machining Improved coating adhesion prevents chipping and provides
More informationD101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
More informationEndmills. Variable Index & Helix Endmills at General. Purpose Prices!
Endmills Endmills at General Purpose Prices! Advanced Supply MMT-Productivity Advanced Supply programs offer tool management software and vending solutions with full flexibility to support our customers.
More informationCA65 15/25 & PR11 25 CA65. Solution for Stainless Steel Machining. Minimizes Notching. Prevents Burrs. Reduces Buil-up Edge.
CA65 15/25 & PR11 25 25 PR11 & 15/25 CA65 Solution for Machining Minimizes Notching. Prevents Burrs. Reduces Builup Edge. For FinishingMedium Chipbreaker! MQ TZE00048 New Coated CA65 15 / PR11 25 CA6515/CA6525
More information4 Flute All Purpose. duramill.com. for steels, stainless steels and high-temp alloys. roughing, slotting, pocketing & ramping applications
4 Flute All Purpose for steels, stainless steels and high-temp alloys roughing, slotting, pocketing & ramping applications duramill.com 2 4 Flute AP The new WhisperKut GEN2 4 Flute AP has been engineered
More informationCATALOGUE MILLS & DRILLS 2017 CARBIDE END MILLS 2 TEETH OR201, OR202 3 CARBIDE END MILLS 3 TEETH OR301 4 CARBIDE END MILLS 4 TEETH OR401, OR402 5
Mills Drills CATALOGUE MILLS & DRILLS 2017 CONTENTS CARBIDE END MILLS 2 TEETH OR201, OR202 3 CARBIDE END MILLS 3 TEETH OR301 4 CARBIDE END MILLS 4 TEETH OR401, OR402 5 CARBIDE END MILLS 4 TEETH WITH DOUBLE
More informationPRIMARY GRADES TURNING TURNING / INSERTS / INTRODUCTION TO CARBIDE INSERTS
/ ISERTS / ITRODUCTIO TO CARBIDE ISERTS PRIMARY GRADES group PVD Coated grades Carbide CVD Ceramics CB PCD Uncoated grades Carbide Cermet P M K S H P01 P05 P10 P15 P20 P25 P30 P35 P40 P45 P50 M01 M05 M15
More informationluechip Tooling Ltd Tel Connectable in accordance with LUecoMPTC» mimatic mi» riven Tool Holders Order-Key fo
luechip Tooling Ltd info@bluechiptooling.co.uk Tel 024 7647 4819 RPK-Reamers with Polygonal Insert Seat for High Chip Removal A new generation of Reamers to machine blind and through holes in components
More informationContents. Indexable Carbide Inserts. Grade Description. Geometries / Chip Breaker. Technical Formulas. Technical Information.
Indexable Carbide Inserts Contents Grade Description Geometries / Chip Breaker Technical Formulas Technical Information Milling Inserts Drilling Inserts Turning Inserts 01 03 04 05 10 17 18 Grade Description
More informationSmall but Powerful Positive Insert with Dovetail Design
1/9 Small but Powerful Positive Insert with ovetail esign 2/9 Small but Powerful Positive Insert with ovetail esign TaeguTec is proud to introduce a brand new product line to its popular CHASEMI family.
More informationA New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
More informationProperties of Valve Materials
Properties of Valve Materials ASTM NO. OTHER DESIGNATION AL MANGA- CARBON CHROME COBALT COPPER IRON LEAD NESE C Cr Co Cu Fe Pb Mn MOLYB- NESE Mo Commercial Aluminum 380 SC 84 A (Modified) UNS A38000 87.0.0.3
More informationUnique the 90 shoulder milling system of WNT
New April 2016 New products for cutting tool engineers Unique the 90 shoulder milling system of WNT 90 x 8 cutting edges + Dragonskin = More Power For machining of Steel Stainless steel Cast iron TOTAL
More informationInsert Series for Turning Application of Hard-to-cut Materials
/ / Insert Series for Turning Application of Hard-to-cut Materials VP2 Chip Breaker (For medium to finishing) Chip Breaker (For finishing) A Solution for Machining Hard-to-cut Materials PC8100 Series Exclusive
More informationNew Large Diameter Drilling Solution with a Quick Change Tip and Indexable Inserts
Diameters (All with Inch Shanks) Inch: 1.032" - 1.781" (every 1/32") Metric: 26.0mm - 45.0mm (every 1mm) Bodies Inch Weldon Shanks Metric Shanks Available Upon Request Length/Diameter Ratio 5xD Tip Geometry
More informationSandvik Hyperion Metal Cutting. Insert Blanks and Strips
andvik Hyperion Metal Cutting Insert Blanks and trips Table of contents Page Insert Blanks 03 Rhombic 80 indexable insert blanks - CNMA Rhombic 55 indexable insert blanks - DNMA quare indexable insert
More informationNew XEVT Line for Excellence in Aluminum Machining
1/14 New XEVT ine for Excellence in Aluminum Machining 2/14 To ensure excellence in aluminum machining across all industries, TaeguTec s CHASEAU line now comes in two new offerings: the XEVT 16 which is
More informationTool Coatings TECHNICAL. TiN (Titanium ium Nitride) TiCN (Titanium Carbonitride) - Balinit FUTURA (Titanium Aluminum Nitride) Balinit X.
Tool Coatings TiN (Titanium ium Nitride) General purpose coating low heat resistance. Good lubricity. TiCN (Titanium Carbonitride) Good abrasion resistance. Recommended for aluminum, brass and bronze applications.
More informationAH725. Super Flash Coating provides High Productivity machining. PVD coated grade for steels and stainless steels. Keeping the Customer First
Keeping the Cusmer First Tungaloy Report No. 012-USA JULY 2009 PVD coated grade for steels and stainless steels Super Flash provides High Productivity machining Triple Force provides long ol life and stable
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More informationRely on our material competence for your demanding industrial processes
Cast materials Rely on our material competence for your demanding industrial processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
More informationNow Available, New YNMG 2.53 Inserts. Insert Shapes YNMG Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Carbide: TT8115 (CVD) TT5080 (PVD)
Insert Sapes YNMG 2.53 Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Caride: TT8115 (CVD) TT5080 (PVD) Now Availale, New YNMG 2.53 Inserts Ingersoll is pleased to announce te expansion of te Gold-Rino
More informationBECKER PCD & CBN Inserts
BECKER & Inserts Please include tip style and grade when ordering. Ordering Example: DCMW-21.52 PBC-40 Insert s= insert thickness CCMW-21.50.5 CCMW-21.51 CCMW-21.52 CCMW-32.50.5 CCMW-32.51 CCMW-32.52 CNMA-430.5
More information- Gundrill style Gundrill cross-hole style Both styles offer lengths up to " OAL (2400mm)
Drilling Range: Ø.551-1.102 (14mm - 28mm) Thread Types: STS Outer four start thread STS Inner single start thread DTS Outer four start thread A New Family of Deep Hole Drilling Tools - Conventional style
More informationBECKER PCD & CBN Inserts
BECKER & Inserts Please include tip style and grade when ordering. Ordering Example: DCMW-21.52 PBC-40 Insert s= insert thickness CCMW-21.50.5 CCMW-21.51 CCMW-21.52 CCMW-32.50.5 CCMW-32.51 CCMW-32.52 CNMA-430.5
More informationK_MILL. The new powerful face milling cutter
The new powerful face milling cutter PREZISS TOOLS in its constant evolution to improve tooling production continuously invests in new technologies & technical knowledge. Because of our concern, we work
More information2016 New Revision HIGH PERFORMANCE TAPS
2016 New Revision HIGH PERFORMANCE TAPS Greenfield Industries is excited to announce the addition of high performance taps to the Cleveland brand. All taps in the Cleveland line are designed to machine
More informationdreborid -»chipbreaker«program
dreborid -»chipbreaker«program dreborid PCD inserts with»chipbreaker«for controlled chipbreaking of long chip aluminum alloys Patents EP 1023961, EP 1023962, US 6,315,502 dreborid CO PCD insert with»chipbreaker«insert
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationTURNING. Stellram Cutting Tool Products
TURNING Stellram Cutting Tool Products ATIstellram.com ATImetals.com Turning Machining Solutions for Mission Critical Metallics Increase productivity and reduce tooling costs in today s most challenging
More informationDeformation of Iron Manganese Steels with Nitrogen and Aluminum
Deformation of Iron Manganese Steels with Nitrogen and Aluminum by Demircan Canadinc Introduction to Hadfield Steel Hadfield Steel: Excessive deformation and wear resistance requiring applications (e.g.,railroad
More informationME-371/571 ENGINEERING MATERIALS
ME-371/571 ENGINEERING MATERIALS Problem Set 2 1. An SAE-AISI 1035 steel alloy is slowly cooled from 950 C to room What is the pro-eutectoid phase, and at what temperature would it first appear? What are
More informationCARBIDE. Being the best through innovation NC-SPOTTING DRILLS. - CENTERING and CHAMFERING
Being the best through innovation - CENTERING and CHAMFERING SELECTION GUIDE ITEM MODEL DESCRIPTION SIZE MIN MAX PAGE D5306 D5307, D D 1 D5315 D5318, D3.0 D 111 RECOMMENDED CUTTING CONDITIONS 112 8 phone:+82-32-526-09,
More informationThe ingenious solution for plunge milling
New June 2017 New products for cutting tool engineers The ingenious solution for plunge milling The new MonsterMill PCR-UNI Drilling Ramping TOTAL TOOLING=QUALITY x SERVICE 2 WNT (UK) Ltd. Sheffield Business
More informationTapping products B59
Tapping Products B59 B60 Notes Hand Taps Taper, Plug and Bottoming Style - for Multi Purpose A3/A5/A7 Ansi EDP No. Bright Finish Bright Finish Bright Finish Thread per Inch No. of Taper Plug Bottoming
More informationHigh precision grinding and superior clamping precision with auto-centering system TPD B TPD 200 B
Technical Information for High precision grinding and superior clamping precision with auto-centering system High precision clamping system - High precision grinding and superior clamping precision with
More informationHigh Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making
Diameters: Metric: 26.0mm - 32.9mm (.1mm increments) 33.0mm - 41.0mm (.5mm increments) Inch: 1.031-1.625 (every 1/32 ) High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making pade
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationNew Tip Geometry for Flat Bottom Hole-Making
New ip Geometry for Flat Bottom HoleMaking iameters: Metric: 8.00mm to 25.5mm (.5mm increments) Inch:.312" 1" Geometry: Steel & General Purpose PF esignation Grade: IN2505 Focus: ie Spring Industry SHCS
More informationMFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining
Micro Diameter High Feed Mills Micro Dia. Cutter for High Feed Machining Low Resistance and Durable Against Chatter for Highly Efficient Machining Shortens Rough Machining Times Replaces Solid End Mills
More informationPRECISION CUTTING TOOLS,INC
CARBIDE DRILLS CARBIDE ENDMILLS COBALT ENDMILLS PRECISION CUTTING TOOLS,INC POWDER METAL ENDMILLS MACHINING Titanium MACHINING stainless StEEls For many years, Titanium has been the most commonly used
More informationWEAR PROPERTIES OF ADI AND CADI
WEAR PROPERTIES OF AND C Wear properties of and C have been tested in the following modes: Pin Abrasion ASTM G132-96(2001) Wet Sand / Rubber Wheel (WSRW) ASTM G105-02 Dry Sand / Rubber Wheel (DSRW) ASTM
More informationIssue February 2016 Valid to December ISO 9001 Registered Quality Management
Issue February 2016 Valid to December 2016 ISO 9001 Registered Quality Management 015 Index January 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 46
More informationFerritic/martensitic cast steel. Stainless steel Austenitic
Machining Data for Threading ISO Material Condition Tensile Strength [N/mm ] Hardness HB Material < 0. %C Annealed 0 1 1 No. Non-alloy steel and cast steel, free cutting steel >= 0. %C Annealed 0 190
More informationIssue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
More informationSulzer Pumps. Cast Materials. The Heart of Your Process
Sulzer Pumps Cast Materials The Heart of Your Process Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users.
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
CUSTOM ADD-ONS FOR ENGLISH UNITS Specials Feed Control Valves See note below for location in the Specification Code V1 Dual Feed Manifold V2 Skip Feed Cam Bar (Not Shown) Please specify rapid distance,
More informationHighly Efficient Cutter with a 66 Cutting Edge Angle
Highly Efficient Cutter with a Cutting Edge Angle Highly Efficient Cutter with a Cutting Edge Angle Economical Inserts with 10 Cutting Edges. Reduces Chattering with Low Cutting Force Design Reduces Cutting
More informationALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
More informationM.A. Ford Where high performance is the standard. Phone: or
For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and precision in advanced solid carbide
More informationK_MILL. The new powerful face milling cutter
The new powerful face milling cutter PREZISS TOOLS in its constant evolution to improve tooling production continuously invests in new technologies & technical knowledge. Because of our concern, we work
More information2007 CATALOG. HIGH PERFORMANCE HSS-E PM Carbide Cut & Form Taps Thread Types UNC UNF M MF Standard Sizes 2-56 to 1 1 /2-6 M1.4 x 0.30 to M36 x 1.
HIGH PERFORMANCE PM Cut & Form Taps Thread Types UNC UNF M MF Standard Sizes 2-56 to 1 1 /2-6 M1.4 x 0.30 to M36 x 1.50 GUHRING Tap Compass Tap Selection Made Easy 2007 CATALOG HOW TO FIND THE MOST SUITABLE
More informationDHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
More informationNEXUS-GDS NEXUS-GDR PRODUCT INFORMATION. vol.2 HSS NEXUS DRILL!
PRODUCT INFORMATION vol.2 HSS NEXUS DRILL! TM TM New generation HSS drill series! Utilizes the HSS-specifi c WDI Coating The WDI TM Coating inhibits wear on the margin! Achieves long tool life in high-speed
More informationTOOLING NEWS E- 50 New Coated Carbide Grades for Stainless Steels AC610M / AC630M
TOOLING NEWS E- 5 New Coated Carbide Grades for Stainless Steels / Machining X5 CrNiMo17 12 2 (316) New Superb Grades for Stainless Steel! Ace Coating / General Features Overcoming the problems associated
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
More informationCountersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute
Countersinks Countersinks Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute smooth cutting perfect chamfering countersinks Product Code: C108 This new generation
More informationTechnical Seminar for Cathodic Protection to GOGC Design Unit Specialists. Dr. Nick Kioupis, Cathodic & Lightning Protection Section Head, DESFA
Technical Seminar for Cathodic Protection to GOGC Design Unit Specialists Dr. Nick Kioupis, Cathodic & Lightning Protection Section Head, DESFA Cathodic Protection Criteria The pipe-to-electrolyte potential
More informationCarbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BURS Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets & merchandisers Carbide Bur Finder Cylindrical, Square End
More informationTOOLING NEWS E-139. New Coated Grade for Stainless Steel Turning AC6020M. Expansion of AC6000M Series P M K N S H
TOOLING NEWS E-139 New Coated for Stainless Steel Turning Expansion of AC6000M Series P M K N S H / / Application Range 250 200 AC610M The new carbide type with Absotech Platinum technology is recommended
More informationExtended Flute Cutter & Splitter Insert
1/10 Extene Flute Cutter & Splitter Insert 2/10 TaeguTec has expane the MIRUS s line by aing extene flute cutters an splitter inserts to improve performance on roughing operations. Extene flute en mills
More informationRD-SAF Face milling and profiling cutter with positive round inserts
RD-SAF Cutter program, RD 2, RD 6, RD 20 ødm (CM) m l 2 ødm m B ød c ød c Morse taper Arbor mounting D c D 3 Max. dm m l 2 l 3 B F Z Nb of inserts Coolant channels Morse taper RD-2/032-03-CM3-080 20.00
More informationChapter 7. Stainless Steels. /MS371/ Structure and Properties of Engineering Alloys
Chapter 7 Stainless Steels Stainless steels at least % Cr in iron is required (max 30% Cr) Cr: to make iron surface by forming a surface oxide film protecting the underlying metal from corrosion Ni: to
More informationUPDATED. High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making. Features & Benefits:
High Productivity, Quick Change, ipped Drills for Large Diameter Hole Making Ingersoll has introduced a new drilling line for large diameter hole applications. he Spadewist, with an optimized cutting edge
More informationProduct innovations Edition Turning, drilling, threading and milling _INNOVATIONS. Our business is customer value.
Product innovations Edition 2014-1 Turning, drilling, threading and milling _INNOVATIONS Our business is customer value. Product innovations Edition 2014-1 Turning, drilling, threading and milling _ A
More informationSUMMARY TECHNICAL INSTRUCTIONS. Technical Information. Geometries and feed rates. Cutting data. Carbide grades for grooving and parting off
SUMMARY TECHNICAL INSTRUCTIONS Technical Information Grooving / Side turning Face grooving Profiling Threading Parting off Page 2-5 6 7 8-9 10-11 Geometries and feed rates Cutting data Inserts type 217
More informationTHREADING TOOLS FOR AEROSPACE MATERIALS
aero THRDING TLS FR RSPC MTRILS N-ID-0116 RSPC PPLICTIN RNG ircraft materials Tool manufacturers are often confronted with tricky challenges when working for the viation industry: The machining of hard
More information