Viking Johnson Couplers and Flange Adaptors
|
|
- Sybil Skinner
- 5 years ago
- Views:
Transcription
1 Viking Johnson Couplers and Flange Adaptors Scan for more information Technical Guide W5.1 Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology PRESSURESYSTEMS W5.1VikingJohnsonMaxiRangeCouplersFlangeAdaptors Applications Repairs New installations Product Attributes Wide tolerance reduces stock holding Superior sealing system Unbeatable corrosion protection Pre assembled for quick installation One fitting is able to connect multiple pipes materials Approvals/Standards BS EN ISO 9001 AWWA/ANSI C.219, EN 14525:2004 Environmental management system accredited to ISO Quality ISO 9001:2008 Quality Management Standard Accelerated age tested The go to organisation for civil and rural water product solutions
2 Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology with a durability design life expectancy of 50 years. Maxi Product Range Couplers Extra long Couplers W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 2 Flange Adaptors Reducing Couplings End Caps Design Specifications One product per nominal bore is needed to affect a repair in most pipe materials. Cast Iron, Ductile Iron, Asbestos Cement, Steel, PVC, ABS, GRP all covered in one product. Gasket has slide easy ribs to reduce installation friction, on pipes at top end of OD range and provide maximum sealing on corroded, pitted pipes. One bolt size / torque for DN50 to DN300 range. Up to a 34 mm tolerance on pipe OD. Angularity is 6 for couplings and stepped couplings, 3 for flange adaptors. Expansion / Contraction is 10 mm for couplings and stepped coupling, 5 mm for flange adaptors. 16 bar (Water) / 6 bar (Gas) maximum working pressure. 24 bar (Water) / 9 bar (Gas) maximum site test pressure. Captive, non rotating bolt head requires single spanner to install. Mechanical and chemical relaxation of the gasket material over its 50 year design life simulated by subjecting products to working pressure test at 80 C for 1000 hours Fig. 1 4 Bolt design Fig. 2 3 Bolt design on DN65, DN80, DN100 NB
3 Table 1 MAXIDAPTOR FAGIBMF050N 50mm NB, to suit 57-74mm OD. Fits T/D, T/E, PN10, PN16, ANSI 125 Flange FAGIBMF080N 80mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16, ANSI 125 Flange FAGIBMF100N 100mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16 Flange FAGIBMF125N 125mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16 Flange FAGIBMF150N 150mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16 Flange FAGIBMF175N 175mm NB, to suit mm OD. Fits 200nb T/D, T/E, PN10, PN16 Flange FAGIBMF200N 200mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16 Flange 225mm NB, to suit mm OD. Fits 250nb T/E, PN10, PN16 Flange FAGIBMF225E 225mm NB, to suit mm OD. Fits 250nb T/E, PN10, PN16 Flange FAGIBMF250NE 250mm NB, to suit mm OD. Fits T/E, PN10, PN16 Flange FAGIBMF mm NB (non VJ), to suit mm OD. Fits T/D Flange FAGIBMF300N 300mm NB, to suit mm OD. Fits T/D, T/E, PN10, PN16 Flange FAGIBMF350N FAGIBMF350A FAGIBMF350B FAGIBM FAGIBM FAGIBMF400N FAGIBMF400ST FAGIBMF400A FAGIBMF400B FAGIBMF450N FAGIBMF450A FAGIBMF450B FAGIBMF450C FAGIBMF450CR FAGIBMF500N FAGIBMF500A FAGIBMF500B FAGIBMF500C FAGIBMF500D FAGIBMF600N FAGIBMF600A FAGIBMF600B FAGIBMF600C FAGIBMF600D 350mm NB, to suit mm OD. Fits PN16 Flange 350mm NB, to suit mm OD. Fits PN16 Flange 350mm NB, to suit mm OD. Fits PN16 Flange 375mm NB (non VJ), to suit 400mm OD. Fits T/D, T/E Flange. 375mm NB (non VJ), to suit 406mm OD. Fits T/D, T/E Flange 375mm NB (non VJ), to suit 426mm OD. Fits T/D, T/E Flange 400mm NB, to suit mm OD. Fits PN16 Flange 400mm NB, to suit mm OD. Fits PN16 Flange 400mm NB, to suit mm OD. Fits PN16 Flange 400mm NB, to suit mm OD. Fits PN16 Flange 450mm NB, to suit mm OD. Fits PN16 Flange 450mm NB, to suit mm OD. Fits PN16 Flange 450mm NB, to suit mm OD. Fits PN16 Flange 450mm NB, to suit mm OD. Fits PN16 Flange 450mm NB, to suit mm OD. Fits PN16 Flange 500mm NB, to suit mm OD. Fits PN16 Flange 500mm NB, to suit mm OD. Fits PN16 Flange 500mm NB, to suit mm OD. Fits PN16 Flange 500mm NB, to suit mm OD. Fits PN16 Flange 500mm NB, to suit mm OD. Fits PN16 Flange 600mm NB, to suit mm OD. Fits PN16 Flange 600mm NB, to suit mm OD. Fits PN16 Flange 600mm NB, to suit mm OD. Fits PN16 Flange 600mm NB, to suit mm OD. Fits PN16 Flange 600mm NB, to suit mm OD. Fits PN16 Flange Fig. 3 Flange Adaptor Fig. 4 Flange Adaptor W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 3
4 Table 2 MAXIFIT GIBMF040N 40mm NB, to suit mm OD GIBMF050N 50mm NB, to suit 57-74mm OD GIBMF065N 65mm NB, to suit 63-85mm OD GIBMF080NP 80mm NB, to suit mm OD GIBMF100NP 100mm NB, to suit mm OD GIBMF125N 125mm NB, to suit mm OD GIBMF150NP 150mm NB, to suit mm OD GIBMF175N 175mm NB, to suit mm OD GIBMF200N 200mm NB, to suit mm OD GIBMF225N 225mm NB, to suit mm OD GIBMF250N 250mm NB, to suit mm OD GIBMF300N 300mm NB, to suit mm OD GIBMFP mm NB, to suit mm OD W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 4 GIBMFA350 GIBMF350N GIBMFP375 GIBMFA400 GIBMFA375 GIBMF400N GIBMF450N GIBMF450A GIBMF450B GIBMFA450 GIBMFP450N GIBMFP450 GIBMF500A GIBMFA500 GIBMF500B GIBMFP500 GIBMF500C GIBMF500 GIBMF600A GIBMF600B GIBMF600C GIBMF600D GIBMF600E GIBMFA600 GIBMF600G 350mm NB, to suit mm OD 350mm NB, to suit mm OD 375mm NB, to suit mm OD 375mm NB, to suit mm OD 375mm NB, to suit mm OD 400mm NB, to suit mm OD 450mm NB, to suit mm OD 450mm NB, to suit mm OD 450mm NB, to suit mm OD 450mm NB, to suit mm OD 450mm NB, to suit mm OD 450mm NB, to suit mm OD 500mm NB, to suit mm OD 500mm NB, to suit mm OD 500mm NB, to suit mm OD 500mm NB, to suit mm OD 500mm NB, to suit mm OD 500mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD 600mm NB, to suit mm OD Fig. 5 3 Bolt design on DN65, DN80, DN100 NB Fig. 6 MAXIFIT GIBMF600H 600mm NB, to suit mm OD GIBMF600I 600mm NB, to suit mm OD
5 Table 3 LONG SLEEVE MAXIFIT GIBMF050L 50mm NB, to suit 57-74mm OD GIBMF065L 65mm NB, to suit 63-85mm OD GIBMF080L 80mm NB, to suit mm OD GIBMF100L 100mm NB, to suit mm OD GIBMF125L 125mm NB, to suit mm OD GIBMF150L 150mm NB, to suit mm OD GIBMF175L 175mm NB, to suit mm OD GIBMF200L 200mm NB, to suit mm OD GIBMF225L 225mm NB, to suit mm OD GIBMF250L 250mm NB, to suit mm OD GIBMF300L 300mm NB, to suit mm OD Table 4 MAXICAP GIBMS050N GIBMS065N GIBMS080N GIBMS080T GIBMS100N GIBMS100T GIBMS125N GIBMS125T GIBMS150N GIBMS150T GIBMS175N GIBMS175T GIBMS200N GIBMS200T GIBMS225N GIBMS225T 50mm NB 50mm NB, Tapped 38mm 65mm NB 80mm NB 80mm NB, Tapped 50mm 100mm NB 100mm NB, Tapped 50mm 125mm NB 125mm NB, Tapped 50mm 150mm NB 150mm NB, Tapped 50mm 175mm NB 175mm NB, Tapped 50mm 200mm NB 200mm NB, Tapped 50mm 225mm NB 225mm NB, Tapped 50mm Fig. 7 Long Sleeve Maxifit Fig. 8 Maxicap W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 5 GIBMS250N 250mm NB GIBMS250T 250mm NB, Tapped 50mm GIBMS300N 300mm NB GIBMS300T 300mm NB, Tapped 50mm
6 Table 5 MAXISTEP W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 6 GIBMFS050065N GIBMFS050080N GIBMFS065080N GIBMFS080100N GIBMFS100125N GIBMFS125150N GIBMFS150175N GIBMFS175200N GIBMFS200225N GIBMFS225250N GIBMFS375 50/65mm NB, suits 57-74mm (small end) to 63-85mm (large end) 50/80mm NB, suits 57-74mm (small end) to mm (large end) 65/80mm NB, suits 63-85mm (small end) to mm (large end) 80/100mm NB, suits mm (small end) to mm (large end) 100/125mm NB, suits mm (small end) to mm (large end) 125/150mm NB, suits mm (small end) to mm (large end) 150/175mm NB, suits mm (small end) to mm (large end) 175/200mm NB, suits mm (small end) to mm (large end) 200/225mm NB, suits mm (small end) to mm (large end) 225/250mm NB, suits mm (small end) to mm (large end) 375mm NB, suits mm (small end) to mm (large end) 500mm NB, suits mm (small end) to mm (large end) 600mm NB, suits mm (small end) to mm (large end) Fig. 9 Maxistep
7 W5.1 Viking Johnson Maxi Range Couplers Flange Adaptors PRESSURE SYSTEMS PG 7
8 Branches Nationwide Support Office & Technical Services Disclaimer: While every effort has been made to ensure that the information in this document is correct and accurate, users of Hynds product or information within this document must make their own assessment of suitability for their particular application. Product dimensions are nominal only, and should be verified if critical to a particular installation. No warranty is either expressed, implied, or statutory made by Hynds unless expressly stated in any sale and purchase agreement entered into between Hynds and the user.
The Viking Johnson range of MaxiFit products - High tolerance pipe couplings - MAXIFIT
Including Large Diameter MaxiFit The Viking Johnson range of MaxiFit products - High tolerance pipe couplings - MAXIFIT Overview MaxiFit High tolerance pipe couplings B A C The Viking Johnson range of
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More informationUltraGrip Optimum Wide Tolerance Repair Solution
Next Generation UltraGrip Optimum Wide Tolerance Repair Solution pipe CONNECTIONS, repair & flow control products for the utilities industry UltraGrip Overview The Perfect Partner for Difficult Repairs
More informationAVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More informationVIKING JOHNSON EASIRANGE. Repair and Tapping Solutions
VIKING JOHNSON EASIRANGE Repair and Tapping Solutions EasiRange Repair and Tapping Solutions A C The Viking Johnson EasiRange has been developed to provide a comprehensive range of pipe repair and tapping
More informationAquaFast Couplings & Flange Adaptors
Responsive AquaFast Couplings & Flange Adaptors For Polyethylene & PVC Connections NEW LARGER SIZE NOW AVAILABLE IN 355MM TO 450MM DIAMETER FITS MULTIPLE SDRS QUICK & EASY FITTING ON OVAL PIPES PIONEERS
More informationUltraGrip Optimum Wide Tolerance & Full End Restraint
Next Generation UltraGrip Optimum Wide Tolerance & Full End Restraint NOW AVAILABLE UP TO DN600 PIONEERS IN PIPE SOLUTIONS Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded
More informationLinerGrip Pipeline Rehabilitation System
Enhanced LinerGrip Pipeline Rehabilitation System For use with Polyethylene Pipe Liners PIONEERS IN PIPE SOLUTIONS LinerGrip Overview A Bespoke Solution to Enhance Pipeline Rehabilitation In an attempt
More informationGeorg Fischer Waga N.V. The reliable wide range fitting for large pipe diameters DN450 - DN600 MULTI/JOINT XL
Georg Fischer Waga N.V. The reliable wide range fitting for large pipe diameters DN450 - DN600 MULTI/JOINT XL MULTI/JOINT XL The use of large diameter pipes has strongly increased worldwide. More and more
More informationCouplings The Perfect Through Wall Connection
Specialist Wall Couplings The Perfect Through Wall Connection pipe CONNECTIONS, repair & flow control products for the utilities industry Wall Couplings Overview The Perfect Solution for Passing Pipes
More informationWaStop Check Valve System
WaStop Check Valve System Scan for more information Technical Guide D9.1 WaStop is a unique patented check valve that stops backflow in drains, providing reliable protection against pipe infiltration by
More informationPRODUCT GUIDE. C.A. Baldwin & Co Ltd. Quality is our strength
PRODUCT GUIDE C.A. Baldwin & Co Ltd Quality is our strength INDEX Expansion / Anti-vibration Couplings Pages 1 7 Repair Bandage Page 8 Fixing and Repair Clamps Pages 9 19 Compression Fittings for Steel
More informationAVK FITTING SOLUTIONS
AVK FITTING SOLUTIONS AVK FITTING SOLUTIONS AVK FITTING SOLUTIONS FOR WATER AND WASTE WATER The AVK Group is one of the leading manufacturers of valves and fittings within the water, gas, waste water,
More informationG-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
More informationDUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
More informationSection 3 Fusible PVC Pipe Connections
3.0 Fusible PVC pipe is joined together using butt-fusion joints, however, it may be necessary to utilize other connections to integrate Fusible PVC pipe sections into an overall pipe system. There are
More informationTAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
More informationPVC Stub Flanges & Backing Rings
PVC Stub Flanges & Backing Rings Australian Made for the pressure pipe market Quick Alignment No Pre-drilling of Holes Easier Installation Australian Made Manufactured to Class 18 Quality ISO 9001 Lic
More informationWANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
More informationROTARING Adjustable Levelling Rings 500 Series
ROTARING Adjustable Levelling Rings 500 Series Scan for more information Technical Guide D4.24 ROTARING Adjustable Levelling Rings reduce the risk of road and pavement damage thanks to its patented, easily
More informationGeorg Fischer Waga N.V. The connection for all pipe diameters Restraint - non restraint DN50 - DN600 MULTI/JOINT 3000 Plus
Georg Fischer Waga N.V. The connection for all pipe diameters Restraint - non DN50 - DN600 MULTI/JOINT 3000 Plus MULTI/JOINT 3000 Plus In your daily work you may encounter pipe systems of various materials
More informationTerrain HDPE. Product Guide
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other
More informationSPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO. Alan Andreani, Ed. D. Mayor of Alliance
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO 2016 Alan Andreani, Ed. D. Mayor of Alliance Mike Dreger, Director Public Safety & Service GENERAL TERMS AND CONDITIONS 1. Special
More informationIS First edition
INTERNATIONAL STANDARD IS0 7005-2 First edition 1988-12-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXflYHAPOAHAfl OPTAHMA~Mfl I-IO CTAHflAPTMA~MM Metallic
More informationLateral Connections Pioneering Evolving Connecting
Lateral Connections Pioneering Evolving Connecting flexseal.co.uk TM The range in brief... Flexseal is the market leader in the development of lateral connections, used for securely connecting a lateral
More informationTechnical Manual PE PIPE SYSTEM MAINTENANCE GUIDE ISSUE 1.1
Technical Manual PE PIPE SYSTEM MAINTENANCE GUIDE ISSUE 1.1 Ref: TM001 28 June 2008 Disclaimer In formulating this manual PIPA has relied upon the advice of its members and, where appropriate, independent
More information7. Allowable Fittings.
7. Allowable Fittings. a. General Requirements. 1) The fittings listed in this section are generally the allowable fittings for the design of DIP and PVC pipe. For steel pipe and fittings, see Part One,
More informationWide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
More informationnon-restrained mechanical couplings for connecting pipes with equal or unequal diameters
VARI-GIB COUPLINGS DN 40 - DN 1200 non-restrained mechanical couplings for connecting pipes with equal or unequal diameters FEATURES Vari-Gib Couplings can be installed without the need to disassemble,
More informationRef RESILIENT SEAT GATE VALVE ISO PN10-16 F4. Model/Ref:
Model/Ref: 180-181 - 182 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400,
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationHelping make groundwork... The UK s largest stockist of Large Diameter UltraGrip. Pioneers in pipe solutions
Helping make groundwork... The UK s largest stockist of Large iameter UltraGrip Pioneers in pipe solutions SIZES vailable FROM N40 to N600 Get to grips with ULTRGRIP n dvanced esign, Exceptional Performance
More informationSaniTite. HP Sewer Pipe 300 mm 750 mm
SaniTite HP Sewer Pipe 300 mm 750 mm sanitite HP SEWER Pipe 300 mm 750 mm Certified to CSA B182.13 A new addition to our proven line of pipe products, SaniTite HP (High Performance) couples advanced Polypropylene
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Flanges PN10/16-10 C + 70 C Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising stem Clockwise
More informationWATER INDUSTRY SPECIFICATION
WATER INDUSTRY SPECIFICATION UK Water Industry WIS 4-21-02 October 1994: Issue 1 (Page 1 of 18) ISSN 1353-2510 Reprinted June 2006 for web publication SPECIFICATION FOR MECHANICAL COUPLINGS AND REPAIR
More informationPOLY-GIB COUPLINGS DN 90 - DN 180
POLY-GIB COUPLINGS DN 90 - DN 180 RESTRINED MECHNICL COUPLING FOR CONNECTING TO HDPE PIPE FETURES The Poly-Gib range comes in a variety of configuration. Straight couplings, stepped couplings, flange adaptors
More informationMATERIAL/MANUFACTURER SPECIFICATIONS FOR DISTRIBUTION WATER MAINS AND APPURTENANCES
MATERIAL/MANUFACTURER SPECIFICATIONS FOR DISTRIBUTION WATER MAINS AND APPURTENANCES REVISION April 2008 1 MATERIAL SPECIFICATIONS T.S. 1 GENERAL Materials incorporated in the finished work and used during
More informationPipe OD. KT1-075T0?? in the typical specifying. offtake size as shown
Tapping s - PN OPERATING PRESSURE rigid and flexible pressure pipe RIGI-TAP FLEXI-TAP VARI-TAP Pipe 0 0 0 00 0 00 0 00 0 00 0 RIGID PIPE FLEXIBLE PIPE DICL Steel CICL AC ABS* GRP* RC PVC HDPE MSCL GWI
More informationFLANGE DIMENSIONS TABLE TYPES
ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS flange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN
More informationFLANGE DIMENSIONS TABLE TYPES
ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS fl ange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN
More informationTechnical Handbook On Rubber Expansion Joints And Flexible Pipe Connections
Technical Handbook On Rubber Expansion Joints And Flexible Pipe Connections Rubber union connector packless expansion joints. F 1123 and FSA's "Technical Handbook: Non-Metallic Expansion Joints and Flexible
More informationSuperlit GRP Pipe. Technical Guide W1.7
Scan for more information Superlit GRP Pipe Technical Guide W1.7 For over 50 years Superlit have successfully serviced the Water and Waste industry, manufacturing high quality Fiberglass pipes and fittings
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 PN10/16 flanges - 10 C + 70 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising
More informationDISTRIBUTED BY EMPIRE INFRASTRUCTURE PTY LTD
DISTRIBUTED BY EMPIRE INFRASTRUCTURE PTY LTD Contents Introduction Applications Standards Quality Classification Product Range Jacking Pipes Relining Pipes Introduction The company The process We are proud
More informationPRODUCT OVERVIEW AUG 2014
AUG 2014 PRODUCT OVERVIEW AUSTRALIAN OWNED AND OPERATED Clover Pipelines is Australia s fastest growing specialist supplier and distributor of innovative pipeline products with years of industry experience
More informationGASTEC QA. Approval Requirements 208. Ductile cast iron wide range fittings for use with pipes of different materials.
KE 208 May 2016 GASTEC QA Approval Requirements 208 Ductile cast iron wide range fittings for use with pipes of different materials. Foreword These GASTEC QA Approval requirements have been approved by
More informationDuctile Iron Pipes (Socket & Spigot Pipes)
Ductile Iron Pipes (Socket & Spigot Pipes) Al-Saad Engineering Consulting Pipeline supply a High Quality and specifications with good Prices for the customers. The Range of Diameter that Al-Saad Engineering
More informationHAWLE-range of products
HAWLE-pRODucTS All OvER ThE world since 1948 HAWLE-range of products HAWLE subsidiaries HAWLE partners Illustrations, technical data, dimensions and weights are subject to alteration without notice. Edition
More informationTOTAL PIPING SOLUTIONS, INC. Quick Cam. Rapid Seal Repair Clamp. Patent Pending Technical Specifications
TOTAL PIPING SOLUTIONS, INC. Quick Cam Rapid Seal Repair Clamp Technical Specifications Rev B July 2017 1. Pressure Rating: Quick Cam Rapid Seal Repair Clamps by when properly installed are capable of
More informationOVALNI ZASUN NP 10-16
procesna oprema OVALNI ZASUN NP 10-16 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over
More informationRomacon-korjausliittimet
Solutions for power transmission Romacon-korjausliittimet www.konaflex.fi Romacon Repair Clamp Type RS-0 Romacon stainless steel repair clamps Style RS-0 are used for permanent repairs of broken and damaged
More informationU-BOLT MECHANICAL TEE (SADDLE-LET) Model 300U
U-BOLT MECHANICAL TEE (SADDLE-LET) U Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses please contact ARGCO. Maximum Working Pressure Up to 365
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 ( NPS 2 to 12 ) Flanges R.F. CLASS 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Rising rotating stem Bolted bonnet
More informationSPECIFICATION SERVICE SADDLE DOUBLE STRAP MODEL 317
Gasket Body Body Body Bale Assembly Bale Gasket Assembly Stud Gasket Assembly Stud Spherical Washer 1.25 3 SADDLE ASSEMBLY 4 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping branch
More informationAVK NEDERLAND INDUSTRIAL VALVES & FITTINGS MAKING A DIFFERENCE INDUSTRIAL 1
AVK NEDERLAND INDUSTRIAL MAKING A DIFFERENCE INDUSTRIAL 1 AVK NEDERLAND INDUSTRIAL AVK Group The AVK Group is a privately owned industrial group that currently comprises 90 companies. AVK s core business
More informationTechnical Guide WM1.7. hygrade.co.nz 0800 HYGRADE ( ) Applications. Product Attributes. Approvals/Standards. Quality.
Technical Guide WM1.7 Superlit GRP Pipe For over 50 years Superlit have successfully serviced the Water & Waste industry, manufacturing high quality Fiberglass pipes & fittings for a wide range of uses.
More informationEasiClamp Permanent Under Pressure Repair and Tapping Solutions
EasiClamp EasiClamp Specifications O. D. Range Dimensions Outlet Nominal Diameter Min Max Y (Max) Z olts No. Diameter. Length Weight (Kg) SP Threaded Size 2 DN0 66.0 7.0 10 110 200 4-M12 x 6mm 4.1 /4 2
More informationMECHANICAL JOINT PIPE
3"-24" DUCTILE IRON FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Mechanical Joint ipe 3 Assembly of Mechanical Joint ipe 4 Technical Information 5 U.S. IE
More informationPipeline Accessories. PSI Wall Sleeves. General Information Selection Guide Technical Data Installation Instruction
Pipeline Accessories PSI Wall Sleeves General Information Selection Guide Technical Data Installation Instruction 1 PSI Wall Sleeves made of steel General Information An economic method to seal hydrostatically
More informationAS/NZS 2280:2012 AS/NZS
AS/NZS 2280:2014 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Ductile iron pipes and fittings Superseding AS/NZS 2280:2012 AS/NZS 2280:2014 AS/NZS 2280:2014 This joint Australian/New
More informationFARMBOSS. UV Resistant Fully Sealed Flexible Joint System Light Weight WE PIPE ( )
FARMBOSS POLYPROPYLENE, TWIN WALL, SMOOTH BORE, CORRUGATED PIPE UV Resistant Fully Sealed Flexible Joint System Light Weight R2.6 Farmboss Polypropylene Pipe October 2013 0800 WE PIPE (93 7473) 0800 WE
More informationSTAINLESS STEEL REPAIR CLAMPS DN 40 - DN 1200
STAINLESS STEEL REPAIR CLAMPS DN 40 - DN 1200 FAST, PERMANENT REPAIR AND REINFORCEMENT SOLUTION FOR MOST PIPE TYPES AND SIZES FEATURES Manufactured from grade 316 stainless steel for superior corrosion
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low
More informationCombiSump. Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610
CombiSump Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610 CombiSump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system,
More informationHAURATON RECYFIX NC DR35 RECYFIX NC. Surface drainage. Rated to e600 lightweight & robust channels made from. for Civil engeneering.
RECYFIX NC Heavy Industrial Surface drainage Rated to e600 lightweight & robust channels made from PP-PE for Civil engeneering extremely stable The Hauraton RECYFIX NC E600 is extremely stable and lightweight,
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationPVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe
Design and Installation Guide PVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe TABLE OF CONTENTS Introduction 2 Products 3 Main-Line Fittings & Service-Line Fittings 3-4 Connections to Dissimilar
More informationSPECIFICATION SERVICE SADDLE DOUBLE BALE MODEL 314
SPECIFICATION Body Body Gasket Gasket Bale Assembly Bale Nut Flat Washer Strap Assembly Stud Nut Flat Washer Spherical Washer 1 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping
More informationList of Acceptable Product Specifications CPDMS0018
List of Acceptable Product Specifications CPDMS0018 17 July 2018 Contents Foreword 3 Pipe and Fittings 4 Polyvinylchloride (PVC) 4 Ductile Iron (DI) 4 Mild Steel (MS) 5 Polyethylene (PE) 5 Polypropylene
More information(For compliance with the new sewers for adoption regulation or building regulations part H1)
Plastic Drainage Keyline offers a comprehensive range of products suitable for all building, foul, surface water and land drainage applications - including new innovative, cost-effective systems for compliance
More informationMonolithic Isolation Fittings
Monolithic Isolation Fittings The Industry s Dual O Ring Seal Standard Tests Include: 100% Hydrostatic Pressure & Electrical Tests 100% Ultrasonic of Welds 100% Magnetic Particle of Welds 100% Dye Penetrant
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationMETAL SEATED GATE VALVE
BEI JI NG JOI NTFLOW SYSTEM CO. Gat eval ve FEATURE Solid wedge gate valves are the perfect solution as a closing device in pipeline systems. Because of the straight bore all impurities can pass through
More informationDONKIN GAS SERVICE SOLUTIONS
AVK INNOVATION, QUALITY, EXPERIENCE DONKIN GAS SERVICE SOLUTIONS AVK AND DONKIN A WINNING COMBINATION Hyde Factory Manufacturing Fittings and Gas Valves since 1847 AVK UK and the Donkin brand are a winning
More information2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
More informationCopper-Type K soft Drawn 40, 50 HDPE 100 and larger
1.0 GENERAL 1.1 Scope 1.1.1 The work covered by this section involves the installation of water and sewer service connections and all other associated work. 1.2 Authorization 1.2.1 Do not install service
More informationGeneral Specification for CRP Lined Pipe & Fittings
General for CRP Lined Pipe & Fittings Table of Contents... Page 1 General... 2 1.1 Quality System... 2 1.2 Design and Test Standards... 2 1.3 Product Traceability... 2 1.4 Product Origin... 2 1.5 Common
More informationPOLSAFE. Gas Distribution System
POLSAFE Gas Distribution System PIPELIFE INTERNATIONAL Pipelife International GmbH is one of the world's leading suppliers of plastic piping systems. Plastic pipes and fittings are produced in 34 Pipelife
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationA V K U K L T D. D o n k i n Va l v e s a n d F i t t i n g s f o r G a s S u p p l y
A V K U K L T D D o n k i n Va l v e s a n d F i t t i n g s f o r G a s S u p p l y 1 Donkin is The Leading Valves and Fittings Manufacturer For The Gas Industry AVK UK As part of the AVK Group we pride
More informationCombiSump. Sump pump
CombiSump Sump pump CombiSump Centrifugal sump pump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system, a modular programme of single stage centrifugal
More informationProcess Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
More informationThermoplastic piping for environment control systems
Thermoplastic piping for environment control systems Durapipe ABS The market leader in pipe systems for environmental control Durapipe ABS - the proven industrial pipework system combining corrosion resistance,
More informationNEOTECHA NXR PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
More informationAll definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
More informationSECTION 18. AMERICAN General Index
SECTION 18 AMERICAN General Index General Index A Abbreviations Organizations...1-1 Standard, American...17-23 Abrasion Resistant Pipe...12-12 Accessories (See Joint Materials) American Flow Control Valves
More informationPRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
More informationAVK 26 AVK UK Water Mains to Meter Offer & Price List 2017
AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017 Technical introduction AVK is a new patented range of composite push fittings combining the safety and strength of a traditional mechanical fitting
More informationLeading brands, knowledgable people WATERMAIN DRAINAGE STREETWARE CAPABILITY PROFILE
Leading brands, knowledgable people WATERMAIN DRAINAGE STREETWARE CAPABILITY PROFILE Contents Introduction...2 Product Categories...2 Watermain...3 Drainage...5 Streetware...7 Operational Standards...9
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
More informationAVK MORE THAN MEETS THE EYE EXPECT US TO EXCEED MARKET STANDARDS
AVK MORE THAN MEETS THE EYE EXPECT US TO EXCEED MARKET STANDARDS DURABILITY AND RELIABILITY ABOVE AND BELOW GROUND Product development and quality control Wedge and resilient rubber vulcanization Durability
More informationAll definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
More informationSaniTite. HP Sewer Pipe 300mm 750mm
SaniTite HP Sewer Pipe 300mm 750mm SANITITE HP SEWER PIPE 300mm 750mm Certified to CSA B182.13 A new addition to our proven line of pipe products, SaniTite HP (High Performance) couples advanced Polypropylene
More informationHYDRO POWER SOLUTIONS
G0027 APPLICATION HYDRO POWER SOLUTIONS Complete PE pipe solutions for hydro power applications www.gpsuk.com Durability and performance for hydro power schemes As a leading UK manufacturer, GPS PE Pipe
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationTunnelling steel pipe systems. Cost-efficient, flexible, reliable.
Tunnelling steel pipe systems. Cost-efficient, flexible, reliable. EN 2 You tunnel. We supply the flexible pipe systems. Tough environment, tough conditions, maximum operating reliability and simple installation.
More information