ECAP THERMAL. pre-finished system for external thermal insulation for walls and ceilings. Insulation & Chemicals Division

Transcription

1 ECAP pre-finished system for external thermal insulation for walls and ceilings THERMAL Insulation & Chemicals Division THERMAL INSULATION. REFURBISHMENT AND DEHUMIDIFICATION

2 COMPARISON BETWEEN ECAP AND THE TRADITIONAL SYSTEMS - FAST APPLICATION: ONLY ONE OF THE BENEFITS DAY TRADITIONAL SYSTEM ECAP Positioning of the starting profile - Glueing of the boards - Waiting for drying of the glue - Fixing of the anchor-dowels - Application of the first coat of the smoothing mortar and net fixing - Waiting for drying of the first coat - Application of the second coat of the smoothing mortar - Waiting for the drying of the second coat of the smoothing mortar - Primer for coloured finishing mortar - Coloured finishing mortar (END) - Positioning of the starting profile - Glueing of the boards - Fixing of the anchor-dowels - Grouting or finishing - Waiting for the drying of the finishing - Application of the primer for the coloured finishing mortar - Coloured finishing mortar application (END) TRADITIONAL SYSTEM ECAP PRODUCTIVITY: 8,08 m / day / person FASTER THAN 60% less time spent and less risks for your home. PRODUCTIVITY:,3 m / day / person COMPARISON WITH TRADITIONAL SYSTEM: + 77% m / day /person - 55% days to finish the job Realization of external wall insulation on the façade of a two-storey building (70 m ), and a three workers team. LARGER SURFACES REGULAR SURFACE OR WALLS WITHOUT WINDOWS * ON CEILINGS ** FURTHER INCREASE OF THE SPEED COMPARED TO TRADITIONAL SYSTEMS * POSSIBILITY TO USE MOBILE SCAFFOLDING OR ELEVATORS. ** AVOIDING THE APPLICATION OF SMOOTHING MESH UPWARD, ECAP MAKES THE APPLICATION EASIER AND ENSURES THE GOOD ENGINEERING PRACTICE. ECAP IS SECURED, with an insurance policy of ten years! M ECAP certified layers Thermal Division... what is it? The primary aim of Edilteco is to produce building materials that promote and enable a healthy living environment. Edilteco has, for a long time, recognised the importance of thermal insulation in buildings and the need to create an effective thermal barrier between the indoor and outdoor conditions. Edilteco has also long understood and appreciated the energy saving, economic and environmental benefits that result from thermal insulation. ECAP : Innovative thermal insulating pre-finished board for the application on walls and ceilings.

3 ECAP SYSTEM SIGNIFICANTLY REDUCES THE POSSIBILITY OF APPLICATION S MISTAKES The board is pre-finished with smoothing layer, mesh with prearranged overlaps, pre-drilled holes for the insertion of anchors and predispositions for grouting between boards. Once the Ecap board is applied, it s enough to lay only one layer of suitable coloured finishing in paste, to obtain a perfect final result. The application can occur also with unfavorable weather conditions. The pre-applied smoothing protects the boards during the working on-site from weather and solar radiation. The thermal insulation performances are suitable to the energetic certification, in line with the legislation. It makes fast and safe the application on site. It improves the productivity during the realization phase. Ecap is indicated for the internal and external thermal insulation of new buildingss, pre-fabricated buildings, for facades restoration and rebuilding. It also allows the elimination of thermal bridges and protection from rain. 3 ) Fixing dowel sites built-in the basecoat thickness. ) Fixing dowel sites are predrilled and covered by a precut mesh. 3) Fiberglass mesh embedded in the smoothing mortar. ) Cement based basecoat layer. 60% saving on installation time! with Avis Technique n. 7/3-55 ECAP L Prefinished thermal insulating EPS board for thermal insulation of (internal and/or external) walls and ceilings. The Ecap board is supplied pre-smoothed with drowed fiberglass mesh, prearranged overlaps and punched holes for the insertion of the anchors. ECAP GT Prefinished thermal insulating EPS board, treated with graphite, for thermal insulation of (internal and/or external) walls and ceiling. The Ecap board is supplied pre-smoothed with drowed fiberglass mesh, prearranged overlaps and pre-drilled holes for the insertion of the anchors. ECAP Stif Prefinished thermal insulating board in Stiferite Class SK. Stiferite Class SK is a sandwich board made of a polyiso foam insulating component, expanded without the use of CFC or HCFC, covered on both faces with saturated fiberglass. λ D = 0,035 W/mK λ D = 0,030 0,03 W/mK λ D = 0,06 0,08 W/mK Perfect for the creation of flame-trap strips ECAP L and ECAP GT are also available in the version with GROOVE to satisfy architectural and aesthetic needs. Groove s accessories: shaped meshes and smoothing trowels. ECAP SOUDATHERM WALL 0 POLYURETHANE SINGLE-COMPONENT ADHESIVE. To apply with gun. For the gluing of insulating boards on walls and facades; for the gluing of decorative elements on facades and as filling of cavities between the insulating boards. A box amounts to a Ecap ADP pallet. No dust formation and nothing to mix. It contributes to the thermal insulation and it is cheap. Less disposal of empty packaging at the end of the working site. ECAP APR SMOOTHING MORTAR IN PASTE CEMENT FREE. Product with high flexibility and impact resistance. It is particularly suitable for the application with mesh. No dust formation and nothing to mix. Free of cement. High elasticity. Particularly handy product. Discover the benefits! See the technical data sheets and application manuals.

4 MAIN ECAP USES Internal and external. ) Ceiling thermal insulation. ) External wall thermal insulation. 3) Elimination of thermal bridges. ) Internal wall thermal insulation. 5) Floor: internal thermal insulation. 6) Floor: external thermal insulation (ex: portico) TECHNICAL CHARACTERISTICS STANDARD ECAP L Prefinished thermal insulating board with expanded synterized polystyrene Thermal conductivity λ D declared to 0 C EN 667 0,035 W/mK Compressive strength at 0% deform. CS (0\Y) EN 86 > 00 kpa Flexural strength BS EN 089 > 50 kpa Water absorption by total immersion and for a long period WL(T) ECAP GT Prefinished thermal insulating board with expanded synterized polystyrene with graphite additive 0,03 W/mK (th. 30 / 0 / 50 mm) 0,030 W/mK (th. from 60 to 00 mm) 70 (*) kpa 00 (**) kpa > = 50 (*) kpa > = 50 (**) kpa EN 087 < % < % (*) ECAP Stif Prefinished thermal insulating board with Stiferite CLASS SK 0,06 W/mK (*) 0,08 W/mK (**) 50 kpa - < % thick. 0-0 mm < % thick. 0-0 mm Water absorption by partial immersion and for a long period W lp EN 087 < 0,5% kg/m < 0,5% kg/m (*) - Resistance factor to the diffusion of water vapour m EN (*) (**) Water absorption by capillarity % - none Permeability to water vapour in eps EN 086-0,08-0,036 (*) mg/(pa h m) 0,00-0,0 (**) mg/(pa h m) - Limit temperature of use - 75 C 80 C (*) - Fire reactivity UNI EN 350- B-s,d0 (*) B-s,d0 (***) B-s,d0 (***) Dimensional stability (in normal conditions of laboratory) DS (N) EN ,% + 0,% (*) < 0,5% (*) complete cycle. (*) (**) (***) thick. mm thick. mm complete cycle. (*) thick. mm (**) thick. mm (***) also for board only. PACKAGING AND STORAGE BOARDS AND PALLET ECAP BOARD: with straight edge 600 x 00 mm (0,7 m ). PACKAGING: Box on stackable pallets (00 x 00 x h. 00 mm) with heat-shrink wrapping. The packaging prevents damages during transport and make the storage on building site easier. THICKNESS mm N BOARDS PER PALLET TOTAL m PER PALLET 53,8 0,3 3,68 7,36 3,0 0,6 8,7 5,8,96 0,08 8,6 7,0

5 COMPLETE SYSTEM FOR: EXTERNAL WALL THERMAL INSULATION ECAP RANGE Consult price lists and catalogue for accessories. RANGE OF PRODUCTS FOR: GLUING, SMOOTHING MORTAR AND FINISHING ECAP ADP Adhesive Powder Fibre reinforced adhesive in powder form, ready to use. ECAP APR Smoothing mortar in paste, free of cement. new! ECAP SOUDATHERM WALL 0 Single-component polyurethane adhesive. new! ECAP FM Finishing Mortar Premixed single-layer levelling smoothing mortar. ISOLTECO RASATURA MONOCAP Premixed single-layer levelling smoothing mortar. ECAP F Fixative Ready to use universal fixative, also available in fibre reinforced version. ECAP MC Mineral Colour Breathable mineral finishing render in powder form. ECAP AC Acrylic Colour Acrylic finishing in paste form. ECAP STC Silicate Colour Mineral finishing in paste form composed of silicates of potassium. ECAP SC Silicone Colour Silicon finishing in paste form. ECAP SP Silicone Paint Silicon wall paint. ECAP GC Glamish Colour Shiny coloured thin-bed finishing in paste form. ECAP GP Glamish Paint Ready to use wall painting in shiny colours. ECAP SCL Selfcleaning Self-cleaning mineral finishing in paste form. ECAP SCLP Selfcleaning Paint Self-cleaning wall paint. ECAP STP Silicate Paint Ready to use wall paint composed of potassium silicates. ECAP AP Acrylic Paint Ready to use resin wall paint. ECAP EP Elastomeric Paint Ready to use elastromeric wall painting with organic binder. On the Ecap external wall insulation, it is also possible to realize STONE FINISHING. Require information to our Technical Department technical@edilteco.com EDILTECO and the environment The concept of sustainability when applied to buildings can be evaluated from two converging points of view. From one side, it is possible to evaluate the impact that the construction and management of a building will have on its whole environment, while from the other side it is possible to analyze specifically all the technologies that have been used during construction, studying the individual environmental impact of each component and every material type that has been used. The evaluation of sustainability of an individual product is extremely complex. It is not measurable according to just one or more eco characteristic, but it is also related to all the factors that interact with the product and the environment during its lifecycle. This issue is further complicated if we say that the product sustainability evaluation is measured across its whole lifecycle, from the raw material to the finished product. Depending on the actual stage in its lifecycle it can have different environmental impacts. The certification of environmental sustainability is the instrument that allows the declaration of the performances and the environmental impacts that a building has on its territory including its energy consumption. Edilteco s products meet the criteria of the environmental sustainability protocols that are used to calculate scores and Leed credits. Ask for the sustainability sheet with LEED scores of the product you are interested in: info@edilteco.com WHO HAS CHOOSEN ECAP REFERENCES LIBRARY AND MUSIC MUSEUM QUARTUCCIU - CAGLIARI - ITALY B&B HOTELS BREST - FRANCE MANFREDONIA HARBOR FOGGIA - ITALY Copyright Edilteco S.p.A. Non authorized reproduction is forbidden The producer has the faculty to modify the products without previous notice.

6 EDILTECO, AN INTERNATIONAL SUCCESS italy. france. benelux. sudamericana LEGEND Edilteco Group Partners Distributors 360 Insulation Edilteco S.p.A. Via dell Industria, San Felice sul Panaro (MO) Italy. Ph Fax I info@edilteco.com Consult our technical and application videos on the Edilteco YouTube Channel. Edilteco is associated with: Copyright EDILTECO S.p.A. - Non authorized reproduction is forbidden GB Rev. - 06