PINGYORK INTERNATIONAL INC. - PCB LAYOUT/PRODUCTION - SMT/DIP/PRODUCT ASSEMBLY PRODUCTION - SAFETY APPROVAL TEST PRESENTATION. Updated June, 2013

Transcription

1 PINGYORK INTERNATIONAL INC. - PCB LAYOUT/PRODUCTION - SMT/DIP/PRODUCT ASSEMBLY PRODUCTION - SAFETY APPROVAL TEST PRESENTATION Updated June, 2013

2 PRESENTATION SUMMARY - PCB Factory Information Layout Design Production Capability Production Available Material Sample & Mass Production Lead Time Factory Production Process Tour ISO/UL Certification Business Partner with PingYork

3 FACTORY INFORMATION Factory Found: June, Factory Location: Luzhu Township, Taoyuan County Sales Office: Taoyuan City, Taoyuan County. Registered Capital: US$11.5 Million Employees: 110 Factory Size: 4,000/sqmt Factory Production Capacity: 40,000/sqmt Factory Certified: ISO9001:2008 & UL. Factory Production: Rigid PCB up to 18 layers. Factory Production available: Rigid/Flex/Rigid Flex PCBs

4 LAYOUT DESIGN SERVICE & PRODUCT REFERENCE Service: All kinds EMI/EMS Solutions. EMI/EMS Applications in all nations. Safety Applications in all nations. Types of Rigid, Flex, Rigid-flex and HDI. Layer design from single up to 24. Product Reference: Telecom, Wireless, Switch hub, Scanner, Router, ADSL modem, RF, USB, Probe card, LCD Monitor, Back-light TV Industrial PC Digital Camera Digital Picture Frames, Server, Projector, MP3 & MP4, DRAM CARD, Testing board, System, SCSI, DDR Ram, VGA card, GPS, HDMI and so forth.

5 LAYOUT DESIGN CAPABILITY High Speed & High Density SMT PCB Design Differential Routing, Controlled Lengths/Delay, Crosstalk Control, and so forth. Impedance Control Design. Design for EMC - reduced EMI and noise susceptibility. Mix Technology Analogue / Digital PCB layout. Multilayer, Surface Mount and Mixed Technologies. Design for Testability. Design for Manufacturability using IPC Class 2 & 3 standards. PADS Logic Schematic Capture & PADS SE DxSim

6 LAYOUT DESIGN WORKING FLOW Case check: Discuss & confirm the product requirement. Circuit design check: Review circuit design & rationalization. Drawing check: Dimension & it s unit check. Component check: Confirm the hole/pad size & its component. Layout Configuration: Constraints driven Placement and Routing. Customer check: Customer check the circuit layout correction. Netlist check: Double check the circuit design. EMI/EMS check: Confirm product spec & Crosstalk analysis. Layout Check: By EMI to make trace/space advisably. Copper design: Enhance signal integrity. Legend check: Design the legends locations. Data output : CAM file (gerber format RS274X). Customer final check: Confirmation or fixed.

7 PRODUCTION CAPABILITY

8 PRODUCTION AVAILABLE MATERIAL Low End materials: - CEM 1, CEM3 and FR1. Standard Materials: - FR4: Tg140 & Tg150. High Tg Materials: - FR4 Tg170, Tg180 & Tg FR5 Tg175 & Tg180. Metal Material: - Aluminum CCL - Copper CCL Special Materials: - Halogen Free, Teflon & Ceramic FPCB Materials: - PET & PI - Halogens & Halogens Free.

9 SAMPLE & MASS PRODUCTION LEAD TIME. Sample Production Lead Time (Days) Layer Count Standard Advance 1~2 layer 4~5 2~3 4 layer 5~6 3~4 6~8 layer 6~7 4~5 10~12 layer 7~8 5~6 14~16 layer 9~10 7~8 Mass Production Lead Time (Weeks) Layer Count Standard Advance 1~2 layer 1.5~ ~1.5 4 layer 2.0~ ~2.0 6~8 layer 2.5~ ~2.5 10~12 layer 3.0~ ~3.0 14~16 layer 4.0~ ~4.0 Note: Production lead time based on counting actual production time and the lead time might change based on production loading.

10 FACTORY TOUR 1 Drilling Process Inner/Outer layer AOI Legend Print

11 FACTORY TOUR 2 CNC Routing E-Testing Hole Counter

12 FACTORY TOUR 3 IPQC & FQC Baking, Packing & Micro-section

13 CERTIFICATION ISO UL

14 PRESENTATION SUMMARY - SMT Factory Introduction Production Capability SMT Production DIP/Assembly Production Production Equipment Quality Inspection ISO/TS Certification Production Product Telecom/RF/EMC/Safety Approval Service Valuable Business Partner

15 FACTORY INTRODUCTION Found on June, 1987 Factory 1 located in Guishan Township. Factory 2 located in Pingzhen City. Capital US$2,000,000 Factory certified by IS09001 & TS16949 Total employee 115 SMT Line x 5 DIP Line x 2 Finish Product Assembly Line x 2 All by Lead Free Process Production

16 PRODUCTION CAPABILITY PCB Max. Size: 300mm(L) 250mm(W) 4.0mm(T) PCB Min. Size: 50mm(L) 50mm(W) 0.3mm(T) Component Min. Size: 0201(0.5mm 0.2mm) IC Min. Space: 0.2mm BGA Ball Space: Min. 0.25mm, Max.1.50mm BGA Ball Dia.: Min. 0.10mm, Max.0.63mm Min. space between component: 0.1mm Capacity/Day: 2.5KK/Chip BGA, Micro BGA, SOIC, PLCC and QFP types of packaged assemblies. Support SMT/CSP/COB and Assembly process

17 SMT PRODUCTION LINES 1 Line A - CP45F-NEO+CP45F-NEO+CP45FV-NEO(Samsung)+TSK-8000 Line B - I-PULSE M1-PLU+I-PULSE M1-PLU+I-PULSE M1(Yamaha)+HELLER 1809EXL Line C - 1KE2050M+KE2070M+KE2060M(Juki)+ YX-NHACRF Line D - 2KE2070M+KE2060M(Juki)+ETC N Line E - 3KE2050M(Juki)+YAMATO NRY-540SPW-7Z All by N2 IR Reflow

18 SMT PRODUCTION LINE 2

19 DIP & ASSEMBLY PRODUCTION LINES 1 DIP (dual-in-line package) Line A - 3 (m) Inserting Section + Lead Free Wave Solder Section + 10(m) Processing & Repairing Section Line B - 3 (m) Inserting Section + Lead Free Wave Solder Section + 10(m) Processing & Repairing Section Finish Product Assembly Line x 2 Final product assembly by manual. Final product testing after assembly. Final product packing after testing.

20 DIP & ASSEMBLY PRODUCTION LINES 2

21 PRODUCTION EQUIPMENT 1 *Stencil Cleaner *V-cuter *BGA Ball Remover

22 PRODUCTION EQUIPMENT 2 *Routing *N2 Producer *Plastic Welding Machines

23 QUALITY INSPECTION 1 *AOI * Solder Thickness Measurement * ICT Tester

24 QUALITY INSPECTION 2 *Burn-in & chamber *High Power Microscope

25 ISO CERTIFICATIONS ISO9001 TS16949

26 PRODUCTION PRODUCTS REFERENCE - ASSEMBLY LCD TV, Monitor, Digital Photo Frame, Automotive AD/BD, PCI Card, USB storage, Wireless Products, GPS, CCTV, IP Camera, Telecom and all kinds of electronics products.

27 TELECOM/RF/EMC/SAFETY APPROVAL SERVICE The product likes Telecom, Safety, EMC and RF testing the necessary controlling, it becomes the important topic for worldwide trading products. Through cooperating with Neutron Lab, we provide various testing service and report, certification application, etc. and our service products include from ITE, communication, home appliance, portable electric machinery instrument to industrial electronic products. Choose us means upgrade your products quality, accelerate your delivery date, and reduce the cost as one full stop service. Customer references: FUJI, Lenovo, ALPHA, ENERGY STAR, DELL, CNAS, FCC, UL, TUV etc.

28 BUSINESS PARTNER WITH PINGYORK Why choose PY as your business partner? Over 15 year experience in PCB layout design and production. (customer reference: AboCom Systems, Inc., USI, etc.) Professional customer service and engineering support. Enhance customer s product developing timeframe and reducing cost, and make the product to market on time. One Stop Total Solution - From layout design to prototype and to mass production. Cost Effective Solution Suggest the best design spec and layout structure to save production cost. Free Boundary Discussion - Engineer available to join product layout/design with customer. In time reply and on time delivery and good quality product.

29 Thank You For Your Attention! Choosing PingYork To Be Your Business Partner To Be Success!