PNEUMATIC RACK & PINION ACTUATORS
|
|
- Laurel Garrison
- 6 years ago
- Views:
Transcription
1 PNEUMATIC RACK & PINION ACTUATORS
2 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series Y Series X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The internal rotation adjusting system is ever free of side-loads on pistons, shaft and body at every feeding pressure. HEAVY DUTY, MAXIMUM LIFETIME! ALPHAIR pneumatic actuators are compact, heavy and reliable. Easy assembly/change on every mean of valve. STANDARD VERSION FEATURES EN AW 0 T extruded Aluminium Body, inside surface finish Ra=0,-0,. 0 micron Hard. EN AB 100 T die-casted Aluminium alloy Pistons, 1 micron. EN AB 100 T die-casted Aluminium alloy Covers, painted with 0-80 micron polyester powder. Carbon steel Shaft, 20 micron nickel-plated. Optional in Stainless Steel AISI 1 (A). Screws in Stainless Steel AISI 0 (A2). Seals in nitrile nubber NBR. Optional HIGH Temperature = FPM/FKM. Optional LOW Temperature = SILICONE. Bearings in low friction acetal resin LAT-LUB, easily replaceable for maintenance. Optional HIGH/LOW Temperature = PA. Pre-compressed Spring Cartridges, easily replaceable for maintenance, 0-80 micron polyester painted. Standard grease: High performances Syntetic Grease. Optional: special grease for HIGH/LOW Temperature. Several special protections available for chemical, pharmaceutical, food and industrial environments. Double lower drilling for valve fastening and centering, according to ISO 211-DIN 7 Standards. Double square lower female shaft key (starlike), according to ISO 211-DIN 7 Standards for assembly on valves with square key on line (0 ) and diagonal key ( ). Solenoid connections according to NAMUR VDI\VDE-8 Standards. Top drilling for accessories fastening, and upper shaft end according to NAMUR VDI\VDE-8 Standards. Position indicator on request, enabling switch-box assembly on top. Aluminium adhesive nameplates, with progressive serial number punched. Lubrification carried out by the manufacturer, guaranteed for min operations. Running test and 100% seal test carried out with electronic equipment and certification of each individual product. Standard execution for temperatures from 20 C to +80 C (optional, special execution for extreme temperatures). Conformity for use in explosive environnement; certification for STANDARD versioned actuators = II 2GD c Tmax 9 C. According to EN 171- design and manufacture standard requirements. AIR SUPPLY Dry or lubricated filtered compressed air. TEMPERATURE RANGE Standard C (- +17 F) HIGH Temperature C ( F) LOW Temperature C ( F) VERY LOW Temperature C ( F) FEEDING PRESSURE 8 bar/120 psi - CONTINUOUS 10 bar/12 psi - MAXIMUM ROTATION ADJUSTING +\- TYPE DOUBLE ACTING TORQUE RATINGS IN Nm AIR SUPPLY IN BAR Y Series = 120 X Series = AP ,0, 7, 8,8 10,0 11, 12, AP , 8,7 10,9 1,0 1,2 17, 19, 21,7 AP 00,0,1 9,2 12, 1, 18, 21, 2, 27,7 0,8 AP 0, 11,0 1, 22,0 27,,0 8,,0 9,,0 AP 07 11,7 2,,1,8 8, 70,2 81,9 9, 10, 117,0 AP 08 17,8,, 71,2 89,0 10,9 12,7 12, 10, 178,1 AP ,7, 8,2 110,9 18, 1, 19,1 221,8 29, 277, AP 11,7 91, 17,2 18,0 228,7 27, 20,2,0 11,7 7, AP 12 0,1 120, 180, 20,7 00,9 1,1 21,2 81, 1, 01,8 AP 1 8,7 17, 20,1,8, 20,2 0,9 9, 780, 87,0 AP , 2,7,0 7, 91,7 710,1 828, 9, AP ,7 19, 79,0 8, 798, 98, AP ,8,7, 887, AP 20 72, 7, AP 270 9, AP 0 911, AP
3 SINGLE ACTING TORQUE RATINGS IN Nm TYPE AP 02 AP 00 N OF AIR SUPPLY IN BAR SPRINGS SPRING STROKE PER SIDE OF 7 8 PISTON ,7, 8,9 7,7,,7 7,1,1 9, 8,1 12,0 10,8 9, 8, 9, 7,7,8,9 1,1 1,9 12,7 11,,,1 12,7 10,8 8,9 7,0 11, 10,2 18,1 1,9 1,7 1, 8,,2 1,7 1,8 11,9 10,0 1,7 12, 21,2 20,0 18,8 17, 10,7 8, 18,8 1,9 1,0 1,1,8 9,0,7 7,7 9, 11,,8,0,,7,8 7,0 AP 0 9,, 1,9 12, 11,7 8, 20, 17,8 1, 1,0 17,2 1,8 10, 7,0 2,9 2, 20,9 18, 22,7 19, 1,9 12, 1, 28,8 2, 2,0 28,2 2,8 21, 18,0,9, 1,9 29,,7 0, 2,9 2, 10,2 1,7 17,1 20, 7,2 9,7 12,1 1, AP 07 22, 12,,2 0,0 2, 1,9,0 1,8 7,,,1 28, 21,1 1, 7,7, 9,,1 7,8 0, 2,8 2, 9,,2 1,0,8 9, 2,0, 7,0 81,1 7,9 72,7 8, 71,2,7,2 8,7 22, 0,0 7,,1 12, 1,9 21,1 2, AP 08, 18,9 2,,1,7 2,2 70,2,9 7, 1,,,0 1, 20,0 88,0 81,7 7, 9,1 72, 0,8 9, 7,8 10,8 99, 9,2 8,9 90,1 78, 7,1, 12, 117, 111,0 10,7 107,9 9, 8,9 7,,,1 7, 9,1 18,9 2,2 1, 7,8 AP 100,2 0,0 80,9 70,9 7,7 0,0 108,7 98,7 88,7 78,7 8, 7,7 0,0 2,2 1, 12, 11, 10, 11,1 9, 77,7 0,0 1,1 1,1 1,1 1,1 10,8 12,1 10, 87,7 191,8 181,8 171,8 11,8 18, 10,8 1,1 11,,2 70,9 88,7 10, 0,0 0,0 0,0 0,0 AP 11 8,,0 10,0 112, 98,8 70,7 17,8 18,1 10, 122,7 1, 11, 88, 0,2 221, 20,9 18,2 18, 190, 12,2 1,1 10,0 27, 29, 21,9 21,2 2,0 207,9 179,8 11,7 1,0 29, 277, 29,9 281,7 2, 22, 197, 8, 112, 10, 18,,0 70,7 88, 10,0 AP 12 11,8,7 177,0 1,7 12,9 8,0 27, 21,0 19,7 17, 18,1 1,2 10, 7, 297, 27,2 2,9 2, 2,2 20, 1, 127, 7,, 1,0 29,7 0, 2, 22, 187, 17,7 9, 7,1,8, 2, 28, 27,7 11,8 1,7 19,7 2,,7 8,0 10, 127, AP 1 18,0 92,0 2,0 211,0 179,0 12,0 2,0 298,0 2,0 20,0 2,0 210,0 1,0 98,0 18,0 8,0 0,0 1,0 2,0 29,0 20,0 18,0 0,0 71,0 7,0 0,0 9,0 8,0 27,0 271,0 92,0 8,0 2,0 90,0 2,0 70,0 1,0 8,0 18,0 22,0 280,0,0 102,0 1,0 170,0 20,0 AP , 12, 0,7 29, 21,0 17,9 9,1 1,9 70,7 2, 9, 29,2 221,1 17,0 77,,2 89,0,8 87, 1, 9, 2, 9,7 1, 07,,1 0,9 1,8 7,7 8, 81,0 79,8 72, 81, 72,2 0,1 7,0 01,9 222, 29, 70,7,8 12, 17,9 221,1 2, AP ,9 191,0 7, 8,9 0,7 2,7 07,, 79,9 1,2 10, 1, 18, 222, 7,9 70, 9, 7,9 70,0 7,0 78,1 82,1 92, 82,9 792,2 7, 829,7 7,7 7,7 1,8 108,0 1022, 98, 89,9 989,1 89,1 797,1 701,1 287,9 8,9 79,9 7,9 191,0 2,7 18, 82,1 AP 200 2, 22,0,7,8,8 22, 87, 78,7 70,0 2, 8,8, 0, 22, ,9 87,2 907,7 7, 2, 8, , 87,2 70, ,0 2,,8 70,0 87,2 22,0 22, 0, 8,1 AP 20,0, , 82,2 0, , , 7,0, , ,0 88, , 0,8 7,0 907,2 AP , 70, , , , ,1 90, AP AP Torque output available from air supply Springs torque output
4 DIMENSIONS - European sizes in millimetres Y Series = 120 X Series = 180 Standard feeding connection 1/2 GAS NPT for AP 20, 270, 0, 20 Special NAMUR plate on request POS. AP02 AP02 AP00 AP0 AP07 AP08 AP100 AP11 AP12 AP1 AP10 AP180 AP200 AP20 AP270 AP0 AP20 A A A B 7 8 8, C 9 0, AUXILIARY D x E - 10 x x 22 - VDI/VDE 8 F x G 0x2 80 x 0 10 x 0 200x0 L 2, 27, 8 2, 9, 9, , 2 M 2,, 1, 8 1, 70, 71, 8 217, 29 Port A Port B 1/8 GAS NPT 1/ GAS NPT 1/2 GAS NPT DIN 29 N x O 8 x 12 1 x x 2 x 2 2 x 0 x 80 P Q x I 9 x 10 9 x x 1 9 x x 1 9 x x 1 1 x 1 11 x 1 1 x 1 1 x 1 1 x 1 22 x 2 22 x 2 TYPE 22 x 2 22 x 2 27 x 0 27 x 0 x 9 22 x 2 27 x 0 27 x 0 x 9 x 9 x 0 27 x 0 x 9 x 0 x 0 x 0 * x 0 7 x 80 F ISO 211 F0 F0 F0 F0 F0/07 F0/07 F07/10 F07/10 F07/10 F10/12 F10/12 F10/12 F1 F1 F1 F1/2 F2/0 Optional F0 F0/0 POS. F0 F0/0 F0 F0/0 F//7 F0 F0/07 F0 F/7/10 F12 F1 F1 F10/12 F(12)/1 F1 F ISO 211 F(12)/1 F1 F0 F0 F0/0 F0 F0/07 F/7/10 F07/10 F10/12 F12 F1 F1 F2 F0 F(1) /2/0 Ø (W) (Mx8) 2 (Mx8) (Mx8) 0 (Mx9) 0 (Mx9) 0 (Mx9) 70 (M8x12) 0 (Mx9) 70 (M8x12) 102 (M10x1) 70 (M8x12) 102 (M10x1) 102 (M10x1) 12 (M12x18) 12 (M12x18) 10 (M1x2) 1 (M20x0) 2 (M1x2) 298 (M20x) H 2 escluso AP AP08=0 0 AP1 = 70 AP10 = 7 AP180 = 8 AP200 = AP270 = AP200 =
5 CONSTRUCTION PARTS - SPECIFICATIONS ISO 211 SHAFT FORCE INTAKES 2 0 PART QUANTITY MATERIAL SPECIFICATION PROTECTION 1 1 Body Extruded aluminium alloy EN AW 0 T A - N - TF 2 2 Piston Aluminium alloy EN AB 100 T A 2 Cover Aluminium alloy EN AB 100T N - V - TF 1 Shaft Carbon steel optional S.S. AISI 0 (A2) ASTM A10 N optional S.S. AISI 1 (A) * 2 Antiejection key Acetalic resin PA\PA LEXAN * 1 Lower shaft O-Ring NBR FPM\FKM Silicone 7 * 1 Upper shaft O-Ring NBR FPM\FKM Silicone 10 * 1 Seeger ring Carbon steel N Spring cartridge Carbon steel, PA, S.S. C-98 V 12 * 2 Piston O-Ring NBR FPM\FKM Silicone 1 * 2 Piston head bearing Acetalic resin PA PA LEXAN 1 * 2 Cover gasket NBR FPM\FKM Silicone 1 1 Nameplate Aluminium Cover fastening screw Stainless Steel AISI 0 (A2) 17 Nut Stainless Steel AISI 0 (A2) 18 Washer Stainless Steel AISI 0 (A2) 19 * O-Ring NBR FPM\FKM Silicone 21 2 Cover dowel Stainless Steel AISI 0 (A2) 2 * 1 Shaft thrust washer Stainless Steel AISI 0 (A2) 2 * 1 Antifriction washer Acetalic resin PA\PA LEXAN 2 * 1 Lower shaft pilot ring Acetalic resin PA\PA LEXAN 2 * 1 Upper shaft pilot ring Acetalic resin PA\PA LEXAN 27 * 2- Piston bearing Acetalic resin PA\PA LEXAN 28 2 Piston dowel Stainless Steel AISI 0 (A2) * SPARE PARTS SET: Standard, Special HIGH Temperatures, Special LOW Temperatures, Special VERY-LOW Temperatures Protection A = N = chemical Nickel-plating V = Painting TF = +PTFE
6 COATINGS MATERIAL TREATMENTS AV standard Hard Polyester painting opt. AISI 1 (A) Colour Dark gray Several available Brown Polished steel Thickness 0 ц 0/80 ц 1 ц 20 ц NV Polyester painting opt. AISI 1 (A) Colour Polished steel Several available Brown Polished steel Thickness 20 ц 0/80 ц 1 ц 20 ц NN opt. AISI 1 (A) Colour Polished steel Polished steel Brown Polished steel Thickness 20 ц 20 ц 1 ц 20 ц TF TF Hard + PTFE coating + PTFE coating opt. AISI 1 (A) Colour Blue Blue Brown Polished steel 0 ц 0 ц Thickness 1 ц 20 ц PTFE 1 ц PTFE 1 ц - Caustic soda. - Detergents. - Low alcaline solutions. - Caustic soda. - Detergents. - Low alcaline solutions. - Low alcaline and low acid solutions. - Marine environments. - High temperatures. HARD ANODIZING is an electrolytic process that produces anodic coating on aluminum, called alumine, with high thickness. Alumine is one of the most hard known materials, with resistance values up to HV (- HRC); properties and features of Hard (alumine thickness 0 micron) are well know and appreciated both for mechanical and chemical resistance. Best friction and corrosion resistance, best surface hardness, good thermic and electrical insulation. ELECTROLESS NICKEL-PLATING Chemical is an electroless coating process that gives nickel layers at extremely constant thickness also on sharp angles, blind-holes, threads and grooves recess. During the process, nickel is combined with phospor at a percentage of 12% (hig-phospor). The obtained surface hardness is about HV (- HRC). Best friction and corrosion resistance, best surface hardness, best external appearence similar to S.S., increased resistance to alcali and detergents in sanitary and food applications. POLYESTER PAINTING Polyester painting is obtained throug powder coatings on polarized parts, by means of light differences in electrical potentials. After applications, parts are baked in order to polymerize and let the painting be spread to avoid micro-porosity. The best elasticity can be obtained at 0/80 micron thickness; a satisfactory adhesion can be assured by sandblasting or brushing, and by special degreasing baths of the rough pieces to be treated. Better corrosion resistance, protection against crashes, better external appearence and several available colours, resistance to chemicals. HARD ANODIZING + PTFE COATING As further improvement of the hard anodizing on aluminium alloys, protective coating made of PTFE is used, known for its particular chemical and physical features. On these double treated surfaces, oxide hardness and low roughness (internal slipping parts) is summed to the chemical resistance and the excellent qualities as a thermic barrier of PTFE (external surfaces, subjected to corrosion). Best corrosion resistance, protection against high temperatures, crashes, extreme resistance to chemicals and in marine environment. AISI 1 (A) STAINLESS STEEL SHAFT - OPTIONAL AISI 1 (A) Stainless Steel shaft, with its great corrosion resistance, is recommended for special applications such as: marine and chemical environments, food and pharmaceutical industry, high temperature applications. Via Molino Emili, MACLODIO (BS) Italy - Tel /2 - Fax All rights reserved - Not guaranteed for accuracy - Data subject to change without notice - Older data sheets are invalid
Butterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
More informationFastening technology for metals and plastics
Fastening technology for metals and plastics Thread forming screws for metals TAPTITE 2000 (M1 approx. M10) The TAPTITE 2000 allows chipless forming during the fastening process. It is characterized by
More informationELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
More informationPN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
More informationStandard Parts. Ganter. Highlights Standard Parts in Hygienic Design
Standard Parts. Ganter. Highlights Standard Parts in Standard Parts in Maximum hygiene is a fundamental requirement, not only where food is produced. Hygiene also plays an increasing role in other industrial
More information- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
More informationINDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
More information(864) SIZE 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG MT MT MT
www.tru-flo.com SIZE 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG MT04 38 56 75 94 113 MT12 62 94 125 156 187 MT16 137 206 275 344 412 MT17 180 270 360 450 540 MT21 250 375 500 625 750 MT26 375 562 750 937
More informationVALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
More informationType 56 Butterfly Valve
Standard Features (Sizes -/2" ") Standard model (-/2" ") has Body and Disc for better chemical resistance at temperatures higher than can be achieved with. " has body and disc as standard. Our 3/3 stainless
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationD1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
More informationPressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
More informationiglidur A180 FDA-general purpose waterproof material
A18 A18 FDA-general purpose waterproof material Standard range from stock The A18 material complies with FOOD AND DRUG ADMINISTRATION (FDA) regulations For direct contact with food or pharmaceuticals For
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationChanges/amendments at a glance
Ball Transfer Units Very high load-bearing capability Bright metal version Corrosion-resistant version 2 Ball Transfer Units Changes/amendments at a glance Notes on: Intended use, general safety instructions,
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationSikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour
GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationKanigen Group, your partner for electroless nickel plating
Kanigen Group Kanigen Group, your partner for electroless nickel plating Kanigen Group has been active in electroless nickel plating of technical parts since1960. In addition to electroless nickel using
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationEngineered Parts Your Design Our Competence
Engineered Parts Your Design Our Competence Engineered Parts by Bossard Your Design Our Competence Competent Partner Proven Quality Highest Supply Reliability Optimum Price-Performance-Ratio Competent
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More informationSECTION MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS
SECTION 11000 MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS PART 1 - GENERAL 1.1 DESCRIPTION A. This section contains general information required to install mechanical equipment as shown on the plans and
More informationSECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
More informationBRUSHES WITH SHANK 62 63
6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000
More informationTechnical data pag SANITARY LINE. Small cabinets QSD pag. 3. Small cabinets QSE pag. 5. Accessories for Sanitary Line pag. 7
Technical data pag. 1 Small cabinets QSD pag. 3 Small cabinets QSE pag. 5 Accessories for pag.. SANITARY LINE TECHNICAL DATA 1 TECHNICAL DATA It is commonly thought that everything to do with the pharmaceutical
More informationRB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION
GENERAL DESCRIPTION The Orbinox model RB Weir Gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant
More information-L- Pressure bar
Sealing ring O -L- Pressure 0.95 +10 bar Material: Sealing ring O: Polyvinyl chloride Sealing ring O-M3-B: Polyamide Free of copper and PTFE For thread Temperature range Nominal tightening D1 D2 B1 Part
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationProcurement Quality Clauses and Specifications
Procurement Quality Clauses and Specifications This document describes the Quality Clauses and Specifications applicable to Lynch Purchase Orders for materials and outsourced processes. The specific items
More informationTribological dry coatings. Integrated security of installation
Tribological dry coatings Integrated security of installation Process-capable screw installation requires a constant and low friction-value deviation. Tribological dry coatings ensure integrated security
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
More informationbrands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
More informationPRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches.
PRESSURE SWITCHES 8D-LT Electro-mechanical pneumatic pressure switches 8D-LT x Electro-mechanical pneumatic pressure switches Page -0 Page -0-0 8D-LT G/, / NPT or flange Microswitch with gold plated contacts
More informationT700 SERIES(AW50)-Impact (Formerly 8050 series) SINGLE HUNG 3 1/4 FRAME DEPTH (SIDE LOAD)
T700 SERIES(AW50)-Impact (Formerly 8050 series) SINGLE HUNG 3 1/4 FRAME DEPTH (SIDE LOAD) FEATURES 1.) Available Configurations -Single hung -Oriel style (optional) 2.) Main frame / Sash -Drop-in glazing
More informationDURNI-COAT Industrial Coatings for Metals and Plastics
DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT High wear resistance Good dimensional accuracy Outstanding hardness Excellent corrosion resistance Uniform layer formation Electrical conductivity
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationFlygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and
More informationThe Leader in Oilfield Coating Technology ISO 9001:2008.
The Leader in Oilfield Coating Technology ISO 9001:2008 www.ssplating.com Who We Are S&S Plating/Coating Dynamics is the leading provider of electro plated coatings to the oilfield, power generation and
More informationCoating Specifications
Quadax Series Butterfly Valves Version May 2011 müller co-ax ag Gottfried-Müller-Str. 1 74670 Forchtenberg Germany Tel. +49 7947 828-0 Fax +49 7947 828-11 E-Mail info@co-ax.com Internet www.co-ax.com Table
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationSECTION ROLLER GATES
GENERAL SUMMARY A. The Contractor shall provide all labor, materials, equipment, and incidentals required to furnish and install roller gates, complete and operational with all necessary accessories as
More informationDaytona Beach Pier Building Renovation Jun 2010
SECTION 15060 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationNEW PRODUCTS PREVIEW. Cool, stylish lighting of solids and spaces.
PRODUCTS PREVIEW Cool, stylish lighting of solids and spaces. Cool and cool square, the essence of LED for wall effects or bollards. The COOL range has taken a leading role in the new generation of products
More informationPTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION
PTFE BELLOWS TECHNICAL SPECIFICATION 1. MATERIALS 1.1 PTFE Only virgin (not reprocessed) PTFE conforming to ASTM D 1457, type III, IV or V shall be used for the production of bellows; the PTFE raw material
More informationKLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
More informationPlastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
More informationFlygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating
More informationSECTION METAL MATERIALS, METHODS AND FASTENING
PART 1 - GENERAL 1.01 DESCRIPTION SECTION 05025 METAL MATERIALS, METHODS AND FASTENING Work Specified Herein and Elsewhere: A. This Section includes the basic materials and methods required for the work
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More information2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
More informationVALVES. Prospector Series Poppet Valves 1/4" to 2" Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves
2 High flow - Cv of 1.2 to 49.5 Durable, robust construction Two mounting styles: inline or subbase 1/4" to 2" ports (SPP or PTF threads) Wide range of ir Pilot Operators available Four functional types:
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More informationHigh Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
More informationMeter, PD Series, H8-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, H8-S1, S3, S5, S6 and S7 Bulletin PO01010 Issue/Rev. 0.2 (1/18) 2 Bulletin PO01010 Issue/Rev. 0.2 (1/18) Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter
More informationDM/..., DC/95000, DM/..., DC/96000
D/..., DC/95000, D/..., DC/96000 Compact cylinders Single acting Ø 12 to 50 mm ight weight Compact design, which is considerably shorter than IS/VD or NF equivalent. ow friction characteristics for high
More informationBaumann 16, 32, 54, and 70 Pneumatic Actuators
Baumann Pneumatic s Product Bulletin Baumann 16, 32,, and 70 Pneumatic s Baumann actuators are single acting, pneumatic actuators with spring-return action. They are compact, multi-spring actuators with
More informationA. Product Data: For each type of deck, accessory, and product indicated.
SECTION 053100 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Roof deck. 2. Composite floor deck. 3. Noncomposite form deck. 1.2 SUBMITTALS A. Product Data: For each type of deck, accessory, and
More informationSECTION DECORATIVE METAL FENCES AND GATES
SECTION 32 31 19 SPEC WRITER NOTE: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More informationUnderground fire hydrants
Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through
More informationBULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
More informationMapefix PE Wall. Chemical anchor for masonry and light loads
Mapefix PE Wall Chemical anchor for masonry and light loads European Technical Approval ETAG 029 M8 M12 AREAS OF USE Mapefix PE Wall is an adhesive for chemically anchoring metal bars in holes made in
More informationSECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.
1.01 RELATED DOCUMENTS SECTION 15060 HANGERS AND SUPPORTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes hangers and supports
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationStainless Steel Aeration Equipment Specification
Section 15 Stainless Steel Aeration Equipment Specification Part 1 - General 1.01 Description A. Scope of Work 1. Furnish, install and test aeration system including air mains, drop pipes, valves, expansion
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More informationP5T J 032 D H S N R 100. Seals Nitrile (std) Fluorocarbon (high temp)
Catalog PDN1-3US Compact guie cyliner for short stroke applications 9 ore sizes, 1mm to mm Strokes 1 to 1mm epening on moel Stanar owel holes on boy an tool plate High loa bearing option Internal bumpers
More informationParticulate Filters. Filter Function. Exclusive Dense Pack Element Design. Optional Components
Particulate ilters Inlet Outlet Monnier particulate filters remove solid and liquid contaminants from compressed air. The proper selection and use of compressed air filters will prevent many short and
More informationBEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103
CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationSECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationWorcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
More informationSUGGESTED SPECIFICATIONS Pump Frames through 64132
TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances
More informationWorcester Controls 44/ Piece Reduced Ball Valves
Worcester Controls 44/459 3 -Piece Reduced Ball Valves Almost 40 years ago, Flowserve Worcester Controls original 3-piece valve was responsible for the development of the UK ball valve market. The Series
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More informationSabrorazi (Technymon Polymers Divis.)
Sliding Bearings Foreword Mongodi Group started up in 975 as a small owned family company specialized in the production of sliding bearings. Thanks to the strong attachment to the business and to all the
More informationWOUTER WITZEL EUROVALVE. Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve
Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve 2 WOUTER WITZEL EUROVALVE Dynaxe sets the new standard for double-offset butterfly valves. It is the
More informationCrude Oil and Refined Products Processing
Crude Oil and Refined Products Processing High Performance Ball Valves for Severe Service Applications Experience in Motion Application Know-How For more than 60 years Argus has delivered high performance
More informationMECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS
MECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS Valve Sealing High Performance Mechanical Packing and Gasket Catalog Valve Sealing System A complete approach to valve sealing
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
More informationFlange Insulation Sets
Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as a galvanic cell and reduce the risk of galvanic
More informationSAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
More informationSTAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels
These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named
More informationG-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
More informationWHAT TO DO? ELECTROPLATING OR METAL SPRAYING?
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING? S. de Vries, J.W. Rauhorst, B. Plasse & F. Kemeling The first step to improve and control the quality of a metal product starts at the desk of the designer.
More informationDURNI-COAT Industrial Coatings for Metals and Plastics
DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT High wear resistance Good dimensional accuracy Outstanding hardness Excellent corrosion resistance Uniform layer formation Electrical conductivity
More informationTECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
More informationRichter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
More information