Transistor heat sinks. Transistor still clips. Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr. Standard
|
|
|
- Abner Ford
- 6 years ago
- Views:
Transcription
1
2 Pada has a wide range of standard heat sinks for PCB applications. Please find in the next pages the complete list of the standards availailable on stock ready for delivery. The heat sinks are black anodized and drilled to make easier the fixing of the components by means of screws. 1
3 Transistor heat sinks Transistor still clips Code Nr. Page Nr. Code Nr. Page Nr. Code Nr. Page Nr
4 Contents Transistor heat sinks 25 Transistor steel clips 3
5 ~I 4
6 I~. 5
7 Pada has a wide range of standard heat sinks for PCB applications. Please find in the next pages the complete list of the standards availailable on stock ready for delivery. The heat sinks are black anodized and drilled to make easier the fixing of the components by means of screws. A fixing of the TOs by means of clips is also possible for some of the available profiles. If you are looking for a time savig solution to fix the heat sink to the board, have a look to the items equipped with weldable pins. The standard heat sinks are available in packages of 200 and/or 500 pieces. Please contact PADA to design together new solutions to solve your dissipation needs. 6
8 7
9 Transistor heat sinks /25/ST 25 13,5 HOLES LAYOUT FOR CASING: TO /25/ST HOLES LAYOUT FOR CASING: TO Ø3, , /25/ST HOLES LAYOUT FOR CASING: TO /20/ST HOLES LAYOUT FOR CASING: TO220 8 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
10 Transistor heat sinks /25/ST HOLES LAYOUT FOR CASING: TO /25/ST HOLES LAYOUT FOR CASING: TO /25/ST HOLES LAYOUT FOR CASING: TO /20/ST 20 11,2 P /20/ST 20 11,2 2,65 RECOMMENDED PCB HOLES LAYOUT Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 9
11 Transistor heat sinks /37,5/ST 37, /36/ST 36 9,5 P /36/ST 36 9,5 2,5 HOLES LAYOUT FOR CASING: TO220 RECOMMENDED PCB HOLES LAYOUT /36/ST 36 9 HOLES LAYOUT FOR CASING: TO /37,5/ST 37,5 8 P /37,5/ST 37,5 8 2,3 HOLES LAYOUT FOR CASING: TO220 RECOMMENDED PCB HOLES LAYOUT 10 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
12 Transistor heat sinks /37,5/ST 37,5 4,2 HOLES LAYOUT FOR CASING: 2xTO /25/ST HOLES LAYOUT FOR CASING: TO /25/ST 25 12,5 HOLES LAYOUT FOR CASING: TO /22/ST Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 11
13 Transistor heat sinks /50/STB 50 3 MATCHING CLIP: Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
14 Transistor heat sinks /25/STB P /25/STB Pin , /25/ST P /25/ST Pin , /38/STB 38 11,5 P /38/ST Pin 38 11,5 2, /38/ST 38 11,5 P /38/ST Pin 38 11,5 2, /50/STB 50 9,5 P /50/STB Pin 50 9,5 2, /50/ST 50 9,5 P /50/ST Pin 50 9,5 2,5 HOLES LAYOUT FOR CASING: SOT.32-TO220 MATCHING CLIP: RECOMMENDED PCB HOLES LAYOUT /25/STB P /25/STB Pin , /25/ST P /25/ST Pin , /38/STB 38 11,5 P /38/ST Pin 38 11,5 2, /38/ST 38 11,5 P /38/ST Pin 38 11,5 2, /50/STB 50 9,5 P /50/STB Pin 50 9,5 2, /50/ST 50 9,5 P /50/ST Pin 50 9,5 2,2 HOLES LAYOUT FOR CASING: SOT.32-TO220 MATCHING CLIP: RECOMMENDED PCB HOLES LAYOUT Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 13
15 Transistor heat sinks /38/STB 38 9 P /38/STB Pin , /38/ST 38 9 P /38/ST Pin , /50/STB ,5 P /50/STB Pin /50/ST 50 7 P /50/ST Pin ,5 MATCHING CLIP: RECOMMENDED PCB HOLES LAYOUT /25/ST P /25/ST , /38/STB 38 10,5 P /38/STB Pin 38 10,5 2, /38/ST 38 10,5 P /38/ST Pin 38 10,5 2, /50/STB 50 8,5 P /50/ST Pin 50 8,5 2, /50/ST 50 8,5 P /50/ST Pin 50 8,5 2,3 MATCHING CLIP: RECOMMENDED PCB HOLES LAYOUT 14 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
16 Transistor heat sinks 8428 P /25/ST Pin 25 12,3 2,2 P /25/STB Pin 25 12,3 2, /38/STB 38 9 P /38/STB Pin , /38/ST 38 9 P /38/ST Pin , /50/STB 50 8,2 P /50/STB Pin 50 8,2 2, /50/ST 50 8,2 P /50/ST Pin 50 8,2 2,2 MATCHING CLIP: RECOMMENDED PCB HOLES LAYOUT 16 6, /10/ST HOLES LAYOUT FOR CASING: TO /10/ST HOLES LAYOUT FOR CASING: TO5 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 15
17 Transistor heat sinks /20/ST P /20/ST Pin , /25/ST P /25/ST Pin ,5 HOLE LAYOUT FOR CASING: TO220 RECOMMENDED PCB HOLES LAYOUT /20/ST P /20/ST Pin /37,5/ST 37,5 11 P /37,5/ST Pin 37, HOLE LAYOUT FOR CASING: SOT.32-TO220 RECOMMENDED PCB HOLES LAYOUT /36/ST 36 10,6 HOLE LAYOUT FOR CASING: TOP3 16 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
18 Transistor heat sinks 8360 Item Number Description Lenght (mm) Rth( C/W) Ø Pins (mm) /32/ST /25/ST 25 10,5 RECOMMENDED PCB HOLES LAYOUT /9/ST 9 54 HOLE LAYOUT FOR CASING: TO5 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 17
19 ~I 18
20 I~ 19
21 Transistor heat sinks /25/ST 25 7 HOLE LAYOUT FOR CASING: TO3 Item Number Description Lenght (mm) Rth( C/W) Ø Pins (mm) /25/ST 25 7 HOLE LAYOUT FOR CASING: COMB /55,5/ST 55,5 14 HOLE LAYOUT FOR CASING: TO5 RECOMMENDED PCB HOLES LAYOUT /36/ST HOLE LAYOUT FOR CASING: TO66-TO220 RECOMMENDED PCB HOLES LAYOUT 20 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
22 Transistor heat sinks 8162 Item Number Descirption Length (mm) Rth( C/W) Ø Pins (mm) /20/ST HOLE LAYOUT FOR CASING: TO /20/ST HOLE LAYOUT FOR CASING: TO /35/ST HOLE LAYOUT FOR CASING: TO66-TO220 Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 21
23 Transistor heat sinks /19/ST H /19/ST H HOLE LAYOUT FOR CASING: TO /30/ST 30 6 P /30/ST Pin , Item Number Description Lenght (mm) Rth( C/W) Ø Pins (mm) /19/ST Oriz /19/ST Vert /19/ST No Pin Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
24 Transistor heat sinks /35/ST /35/ST asola HOLE LAYOUT FOR CASING: TO220 RECOMMENDED PCB HOLES LAYOUT /38/ST HOLE LAYOUT FOR CASING: TO /32/ST RACOMMENDED PCB HOLE LAYOUT 8207 Series /40/ST Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys) 23
25 Transistor heat sinks 8478 P /20/ST Pin ,3 P /25/ST Pin ,3 P /35/ST Pin ,3 RECOMMENDED PCB HOLES LAYOUT Cu 8208/38/ST RECOMMENDED RACOMMENDED PCB PCB HOLES HOLE LAYOUT LAYOUT /25/ST Drawings scale 1:2 Dimensions are subject to extrusion tolerances EN (Aluminium and aluminium alloys)
26 Transistor steel clips 25
27 Transistor steel clips Material Steel C67S EN Finishing White Zinced Material Steel C67S EN Finishing Nickel Plated Material Steel C67S EN Finishing Nickel Plated Material Steel C67S EN Finishing White Plated 26
28 Transistor steel clips Material Steel C67S EN Finishing White Zinced Material Finishing St. Steel AISI Material Finishing St. Steel AISI Material Steel C67S EN Finishing Phosphatizing 27
29 Transistor steel clips Material Finishing St. Steel AISI Material Steel C67S EN Finishing Phosphatizing Material Finishing St. Steel AISI Material Finishing St. Steel AISI
30 Transistor steel clips Material Finishing St. Steel AISI Material Finishing St. Steel AISI Material Steel C67S EN Finishing Nickel Plated Material Steel C67S EN Finishing Nickel Plated 29
31 Notes 30
32 Notes 31
33 Notes 32
34 10/08 PADA ENGINEERING S.r.l. PADA Via ENGINEERING G.B. Pirelli 11 S.r.l. I Saltara (PU) - Italy Via G.B. Pirelli 11 I Tel. +39 Saltara 0721 (PU) Italy Fax Tel Fax pada@pada.it Web: pada@pada.it Web:
Contents. SuperPlate. Tubes Technology. Through Holes Technology. Milled Channels Technology. Thermal Analysis. SuperPlate
: an efficient way to manage complex electronic systems having high concentrated power. Water cooling is becoming more and more the solution to dissipate the high power of last generation power (IGBTs)
EXH HEAT-SINK ALUMINIUM ENCLOSURE
EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH series is an aluminium enclosure with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation
Concealed hinges. Art.: Art.: Art.:6103 Art.:6127. Art.:6589 Art.:6128 Art.:
Concealed hinges Art.:6069.05 Art.:6069.04 Art.:6103 Art.:6127 Art.:6589 Art.:6128 Art.:6069.09 Art.:6069.14 Art.:6069.00 Art.:6588 Art.:6100 Art.:6075, F-81 Ordering example: Art.no 6001 01/02. 04/30
Amphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages.
02 Stainless Steel Rittal The System. The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind, we have bundled our innovative enclosure, power distribution,
PNEUMATIC RACK & PINION ACTUATORS
PNEUMATIC RACK & PINION ACTUATORS 90-120 - 180 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design,
Field Connector for simple installation. Floating Perimeter detail. Field Connector. Perimeter & XL Connector
mm M0-.5 Turnbuckle connections to structural steel 30mm Perimeter Extrusion Simple supported 4 screw assembly and vertically supported flanged grid 750 Montevideo Road Tel (40)799-4200 Main Runner with
KUBIC GLASS SHELF SUPPORTS
KUBIC GLASS SHELF SYMBOLS AND FINISHES LEGEND SYMBOLS = SHELF SAFELY LOCKED DURING TRANSPORTATION AND AT HOME. LOCK = ANTI-TURNOVER LOCKING SYSTEM = NORMS / PATENTS = PHILLIPS / POZIDRIV N = NEWTON = PART.NO
Engineered Parts Your Design Our Competence
Engineered Parts Your Design Our Competence Engineered Parts by Bossard Your Design Our Competence Competent Partner Proven Quality Highest Supply Reliability Optimum Price-Performance-Ratio Competent
Standard Liquid Cold Plates
Standard Liquid Cold Plates Part Number Size Weight Efficiency BK CP1421 140 x 210 x 18.5 mm 1.3 kg (Rth = 10º C/kw @ 51/min) BK CP1426 140 x 260 x 18.5 mm 1.6 kg (Rth = 8 ºC/kw @ 51/min) BP CP1518 150
FINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
Welding Elements Catalogue
Quality meets Innovation Welding Elements Catalogue 2017 - Welding Elements Catalogue Welding Elements Welding Elements Catalogue Issue 06/2017 Transmission and duplication of this document, dissemination
SECTION EXTERIOR GRILLS AND SCREENS
SECTION 10 82 13 PART 1 GENERAL PART 1 1 SUMMARY A. Section Includes: 1. Exterior perforated aluminum screen wall system with Ombrae TM Optical Tile imaging technology. 2. Accessories including attachments,
UGITECH production plants
production plants Bars Avenue Paul Girod 73403 UGINE Cedex Tel. +33 (0)4 79 89 30 30 Fax: +33 (0)4 79 89 34 34 Italia Via G. Di Vittorio, 34/36 20068 PESCHIERA BORROMEO (MI) ITALY Tel. +39 02 54 74 34
Technical data for holding magnets (gripper magnets)
Magnets 929 Technical data for holding magnets (gripper magnets) Structure: Gripper magnets are magnets that, due to thier structure have only one attracting surface. No magnetic force action originates
B5B SERIES CRL SMOKE BAFFLE SYSTEMS
NET SIZE 15/16" B5B SERIES CRL CRL ARE DESIGNED TO PROVIDE AN ALMOST INVISIBLE TEMPERED SMOKE CURTAIN. MANY OF TODAY'S FIRE CODES REQUIRE LARGE OFFICES OR RETAIL AREAS TO BE BROKEN DOWN INTO SMALLER, MORE
35, rue des Bas-Trévois CS Troyes Cedex - France Tél : +33 (0) Fax : +33 (0) web :
STEEL INDUSTRY 35, rue des Bas-Trévois CS 90104-10003 Troyes Cedex - France Tél : +33 (0)3 25 76 29 50 - Fax : +33 (0)3 25 80 31 62 web : www.sedis.com - e-mail : https://sedis.com/contact Finland Sweden
MINOR. Electrical submersible drainage pump. Tel Fax Hz. No: PD603-EN. Revision
o: PD63-E Revision 27.12 z MIOR 793 mm Ø 286 mm Ø1 mm Weight: 2 kg P (kw) 6 (m) 4 3 2 1 4 3 3 2 2 1 1 1 1 2 2 3 3 ISO 996/A : ormal pressure : igh pressure Insulation class (IEC 8) Rated output Max. power
Restriction on Acquisition of Certain Articles Containing Specialty Metals.
252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals. As prescribed in 225.7003-5(a)(2), use the following clause: RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING
Steels for Hydraulic Applications from Ovako
Steels for Hydraulic Applications from Ovako mapp_hydraulic.indd 1 09-09-29 14.03.14 Our hydraulic steel can take the pressure At Ovako we have a long tradition as a steel supplier to the hydraulic industry,
3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
ASSEMBLY INSTRUCTION.
INSTALLATION OF BUILT-IN BOX brickwork plastering sealing tape built-in box with flange height adjustment sealing tile adhesive tiles LED technology cover silicon joints aluminium profiles The built-in
Comparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
Thinking big. Acting bold.
Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings
High Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL
ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL HR500 HIGH PERFORMANCE BALUSTRADE COPYRIGHT This Technical manual remains the property of Aluminium Specialties Group Pty Limited and contains privileged information
HSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up
INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
CASSETTE SP Implementation guide
CASSETTE SP Implementation guide Published on 21 August 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr PRESENTATION
European Technical Assessment. ETA-17/0237 of 15/05/2017. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej
INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011
STUDY: STAGE : ENGLISH VERSION Aerospace series Bolt Countersunk head, Short thread Inch series
DRAFT pren6114 Edition : P5 Date: Dec.2007 STUDY: STAGE : Ref. : Superseding Ref. : ENGLISH VERSION Aerospace series Bolt Countersunk head, Short thread Inch series Série Aérospatiale Vis, tête fraisée,
ALUBOX Series Junction boxes in IP66 aluminium alloy
UBOX Series Junction boxes in IP aluminium alloy > ENCLOSURES IP UBOX Series UBOX-EX Series Dimensions () Screw for attaching cover Earthing screws Weight (Kg) 00 x 00 x 59 n 2 M5x0 n M4x 0,290 /32 53.00
PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
INDEPENDENT MACHINING SERVICE COMPANY. Technological capabilities
INDEPENDENT MACHINING SERVICE COMPANY Technological capabilities RESIF at a glance 1993 Foundation >150 Specialists Company has been engaged in smart precision machining for 25 years. We make parts and
SLOTTED SPRING PINS ISO 8752 ASME B ASME B18.8.4M 1
SLOTTED SPRING PINS ISO 7 ASME B.. ASME B..M SLOTTED SPRING PINS SPIROL Slotted Spring Pins manufactured to ISO 7 (EN 7), ASME..M Type B (Metric), and ASME B.. (Inch) are available from stock. DIN is interchangeable
SECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING
7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
The Leader in Oilfield Coating Technology ISO 9001:2008.
The Leader in Oilfield Coating Technology ISO 9001:2008 www.ssplating.com Who We Are S&S Plating/Coating Dynamics is the leading provider of electro plated coatings to the oilfield, power generation and
A. Pre-engineered, pre-finished extruded aluminum Pavilions.
10 73 00 SECTION Pavilions PART 1 GENERAL 1.1 SECTION INCLUDES A. Pre-engineered, pre-finished extruded aluminum Pavilions. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and Accessories. B. Section
The under-tile thermo insulating system INSTRUCTIONS FOR CORRECT INSTALLATION
The under-tile thermo insulating system INSTRUCTIONS FOR CORRECT INSTALLATION The under-tile thermo insulating system PHASE 1 STARTING INSTALLATION Pag. 3 NOTE CUTTING THE PANEL Pag. 4 PHASE 2 JOINTS AND
Material Composition Survey and Response Manual (Supplementary Edition for Yokogawa Group)
Material Composition Survey and Response Manual (Supplementary Edition for Yokogawa Group) July 11 2011 Version 3.2 Yokogawa Electric Corporation SPR-PARTS-A030E 1 Contents Material Composition Survey
ALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
Façade panels riveted on an aluminium supporting structure
Ventilated façade 1 General These application instructions are specifically intended for the fastening of large-size EURO PANELS OVERSEAS N.V. façade panels as outside wall cladding on a ventilated and
AWS B2.1/B2.1M-BMG:2009. Base Metal Grouping for Welding Procedure and Performance Qualification
Base Metal Grouping for Welding Procedure and Performance Qualification Base Metal Grouping for Welding Procedure and Performance Qualification Prepared by the American Welding Society (AWS) B2 Committee
Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
1 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 2 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 3 Note:
PORTA-FAB Cleanroom Ceiling Systems
PORTA-FAB Cleanroom Ceiling Systems FABLINE 2 GASKET SEAL GRID INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION
BARE OVERHEAD CONDUCTORS
BARE OVERHEAD CONDUCTORS BARE OVERHEAD CONDUCTORS MISSION De Angeli Prodotti aspires to be the manufacturing leader - in terms of quality and innovation - of both insulated and enameled wires for electromechanical
Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour
GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies
min. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
ton as co low volume at lower cost
ton as co low volume at lower cost ton as co High Mix Wide mix of mechanical parts & mechatronic assemblies from a high mix of materials and processes. Low Volume Production series of 1-20 pieces are our
Ramps Vip Aldime WHAT DO VIP ALDIME RAMPS HAVE THAT OTHERS DO NOT?
Ramps Vip Aldime Vip Vip Aldime, established in 2005, is presently a business project within the field of aluminum. Its professional team proudly bears more than 20 years of experience in this sector.
TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets
Pag. 1/6 TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets This category of items is in continuous evolution. The raw material from which it is made is the first component that must be analyzed
36,50 21,50. RJ45, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 10 GIGABIT, CONTACT SALES OFFICE FOR TEST RESULTS
29,36 TYPICAL 26,98 TYPICAL 2,50 M28x - 6g TO SUIT H INTERFACE 4,93,250-0,P-0,3L-TS 3,25, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 0 GIGABIT, CONTACT OFFICE FOR
Flush mounting boxes. For masonry - TECHNICAL CHARACTERISTICS
Flush mounting boxes For masonry - TECHNICAL CHARACTERISTICS Technical specifications technopolymer highly resistant to impacts and to deformation temperature during installation: from -15 C to +60 C resistance
Drawn Round Steel Bars. Production Units: Malegno (BS), Italy
Page 1 of 8 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy Page 2 of 8 Products STRUCTURAL AND GENERAL
Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
CANNULATED ROUND BARS IN STAINLESS STEELS AND TITANIUM ALLOYS FOR SURGICAL TOOLS AND IMPLANTS
CANNULATED ROUND BARS IN STAINLESS STEELS AND TITANIUM ALLOYS FOR SURGICAL TOOLS AND IMPLANTS General Catalogue - Introduction - A 1 Alloys selection for medical tools & instruments - A 3 Grade 420 B standard
A. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
material specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
Master Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
aluminium - copper welding alloys wires & rods
w w w. s a f r a s p a. c o m aluminium - copper welding alloys wires & rods w w w. s a f r a s p a. c o m aluminium - copper welding alloys wires & rods Safra Spa Aluminium Alloys Formats available Aluminium
14. Designing with FineLine BGA Packages
14. Designing with FineLine BGA Packages S51014-1.0 Chapter 14, Designing with FineLine BGA Packages, replaces AN 114: Designing with FineLine BGA Packages. Introduction As programmable logic devices (PLDs)
Bore Code 1 1/8" mm 121
/8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" 2 28.5mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under
High Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
Lecture 9 - Manufacturing in Engineering
Introduction Dr. Carolyn Skurla Speaking Slide 2 Process Selection Choice depends on: The material from which the component is to be made. The size, shape, and dimension tolerances for the component. The
CANNULATED ROUND BARS IN STAINLESS STEELS AND TITANIUM ALLOYS FOR SURGICAL TOOLS AND IMPLANTS. Main Catalog
CANNULATED ROUND BARS IN STAINLESS STEELS AND TITANIUM ALLOYS FOR SURGICAL TOOLS AND IMPLANTS Main Catalog - Introduction - A 1 Alloys selection for medical instruments - A 3 Grade 420 B cannulated bars
TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors
Applications Features TE Connectivity DEUTSCH DTS Series MIL-DTL-38999 Series III Metal Connectors High-performance military aircraft Commercial aircraft Communications equipment Armored personnel carriers
we give shape to ideas
we give shape to ideas METAL BUSHING OUR COMPANY We give shape to ideas 1 2 4 3 SETVIS-FISAT was set up in Vercelli in 1933. The company specialized in plastic material printing and has constantly been
Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
Safety Ladders: Made of Aluminium
Y-Spar Anodized aluminium alloy ladder. Guide-rail profile: 52 x 51 mm. Comes with joint plate. Mounting brackets extra to order. Mounting distance: recommended 1400 mm - max. 1680 mm. Installation of
C o m p a n y P r o f i l e E n g
Eng C o m p a n y P r o f i l e application pictures trade@dallai.it C o m p a n y P r o f i l e COMPANY PRODUCTION HISTORY OF DALLAI QUALITY SERVICE EVOLUTION www.dallai.it type - D type - A type - B
Specifications. TABLE - 1 Wrought alloys : Chemical composition limits (per cent)
Specifications TABLE - 1 Wrought alloys : Chemical composition limits (per cent) Equivalent Copper Magnesium Silicon Iron Manganese * Others Remarks (ISS) alloy (AA) (Total) Old New U.S.A. Min. Max. Min.
ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA
ASSEMBLY INSTRUCTIONS RESIDENTIAL SOLUTION CROSSRAIL GROUND MOUNT SYSTEM USA TABLE OF CONTENTS TABLE OF CONTENTS SAFETY REGULATIONS MATERIALS REQUIRED ASSEMBLY ENGINEERING DRAWINGS TERMS AND CONDITIONS
Roboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY
Roboze one THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze The only Beltless 3D printer with a real 25 micron layer Roboze 2 Beltless Roboze Technology New stainless steel extruder
20 W Power Resistor, Thick Film Technology, TO-220
20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters
Final Acceptance Criteria Standard for PV Modules-Final Module Assembly
Final Acceptance Criteria Standard for PV Modules-Final Module Assembly Developed by the Visual Acceptance Criteria for Solar Panel- Final Module Assembly Subcommittee (E-15) of the IPC PV Module Technical
SIT Group L N P R O D U C T L I N E
SIT Group L N P R O D U C T L I N E F L U E S Y S T E M S I n d e x T w i n F l u e S y s t e m 8 0 2 T w i n F l u e S y s t e m 6 0 8 C o a x i a l S y s t e m 1 0 F l u e S y s t e m K i t 1 3 TWIN
SPECIALISTS IN THE DESIGN, MANUFACTURE AND SUPPLY OF DC ELECTRICAL SYSTEMS.
SPECIALISTS IN THE DESIGN, MANUFACTURE AND SUPPLY OF DC ELECTRICAL SYSTEMS www.gcorner.co.uk G CORNER COMPANY INTRODUCTION Design and Engineering solutions for industry. G Corner is one of the world s
Introducing the Revolutionary. Twinson Decking NOW IN STOCK. low maintenance water resistant easy to fit easy to install durable
Introducing the Revolutionary Twinson Decking NOW IN STOCK natural appearance splinter free resistant to insects does not split environmentally friendly (100% recyclable) low maintenance water resistant
Freescale Semiconductor Tape Ball Grid Array (TBGA) Overview
Freescale Semiconductor Tape Ball Grid Array (TBGA) Overview Revision 0 2006 Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the
BAUSCH + STRÖBEL. Technical Specification SP100/200 SP3060. Filling machine for bottles Page 1 of 6
BAUSCH + STRÖBEL Technical SP100/200 Filling machine for bottles 2012-06-04 Page 1 of 6 Contents 1. General 3 1.1 Application 3 2. Machine design 3 2.1 Basic construction 3 2.2 Container infeed 3 2.3 Dosing
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Prostheses for Stapes Surgery. Self-Crimping Hook in Superelastic NITINOL. Reconstructive Biomaterials Prostheses for Otosurgery
Self-Crimping Hook in Superelastic NITINOL Bandage for Rhinoplasty Surgical Instruments PVA Anatomical Swabs Disposable Suction Tubes Prostheses for Stapes Surgery Reconstructive Biomaterials Prostheses
POLAMCO LTD USB A CABLED PLUG ASSEMBLY PC4D **-*-*-L****(-*) PC4D NX-1-C-L2000(-B) C NCAGE CODE U5792 WEIGHT
n32,50 MAX 45 `0,25 O RING SEAL OPTIONAL PLUG A = USB A B = USB B OMIT FOR CABLE ONLY L**** OPTIONAL LENGTH IN MM LASER PART/BATCH MARK HERE PC4D002-5NX--C-L2000(-B) GENERALLY TO THE REQUIREMENTS OF MIL-DTL-38999
ANDROMEDA Q Design by Carla Baratelli
ANDROMEDA Q Design by Carla Baratelli Family of recessed modular downlights for indoor applications Applications: false ceilings, shelves, showcases, shop windows Setting: hotel, residential, museums,
INTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
CONTACT INFORMATION Please feel free to contact us, we will be only too happy to discuss your project. Tel: Fax:
Southern Rigging Supplies CONTEMPORARY HANRAIL SYSTEMS from Southern Rigging Supplies Are you looking for a handrail system to add elegance and functionality to your office, home or outdoor living space?
CUP - Sealed blind rivet
made of stainless steel A2 AISI 304 or made of stainless steel A4 AISI 316 with mandrel made of stainless steel Maximum corrosion protection! Survey on CUP sealed blind rivet of stainless steel Increasing
Thermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
QForm. Form3D. Advanced software for forging simulation
QForm Form3D Advanced software for forging simulation The goals of forging technology : Make the parts of the required shape Provide required properties Do it in time and at the lowest cost Forging process
WIRE SIZE HUTCHINSON HSS BLANKS
DRILL & REAMER BLANKS WIRE SIZE HUTCHINSON HSS BLANKS Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each 1.2280 3 7 /8 2.2210 3 7 /8 3.2130 3 3 /4 4.200 3 3 /4 5.2055 3 3 /4 6.2040
SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
INDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
DIVISION: METALS SECTION: METAL RAILINGS REPORT HOLDER: ULTRALOX 2955 LONE OAK DRIVE, SUITE 180 EAGAN, MINNESOTA 55121
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3485 Issued 10/2017 This report is subject to renewal 10/2018. DIVISION: 05 00 00
COMPANY LOCATION APPROVED PROCESS SPECIFICATION
COMPANY LOCATION APPROVED PROCESS SPECIFICATION LOCKHEED MARTIN ORLANDO, FL ALUMINUM CHEMICAL FILM CLASS 1A AMS/MIL-C-5541E ALUMINUM CHEMICAL FILM CLASS 3 AMS/MIL-C-5541E APPLICATION OF PRIMER AND TOPCOAT
METAL FINISHING. (As per revised VTU syllabus: )
METAL FINISHING (As per revised VTU syllabus: 2015-16) Definition: It is a process in which a specimen metal (article) is coated with another metal or a polymer in order to modify the surface properties
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING?
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING? S. de Vries, J.W. Rauhorst, B. Plasse & F. Kemeling The first step to improve and control the quality of a metal product starts at the desk of the designer.
Fastening technology for metals and plastics
Fastening technology for metals and plastics Thread forming screws for metals TAPTITE 2000 (M1 approx. M10) The TAPTITE 2000 allows chipless forming during the fastening process. It is characterized by