HB Series Single Pole Standard Precision Snap-acting Switches
|
|
- Belinda Bradley
- 6 years ago
- Views:
Transcription
1 H Series Features/enefits Low differential travel, high repeatability Long life50,000 cycles typical Single and double pole circuitry Sealed actuator and case Typical pplications Thermostats Motors Industrial controls Specifications ONTT RTING: From low level* to 80 V ; see ELETRIL RTING option section for complete listings. ELETRIL LIFE: 50,000 cycles at 50 V. consult ustomer Service enter for typical life at other ratings. INSULTION RESISTNE:,000 M ohm min. IELETRI STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 6ºF to 0ºF ( 55º to 50º). OPERTING FORE: From oz. to 6 oz. max. at actuator button available. MOUNTING SREWS: Torque in/lbs max. (Note: Exceeding in/lbs torque may change operating characteristics and increase the possibility of cracking switch case). TERMINL SREWS: Torque in/lbs max. PNEL MOUNTING USHING: Torque -6 in/lbs max. EGREE OF PROTETION: IP65; ust-proof, water splash and dew condensation. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V V or max. Materials SWITH HOUSING: Heat resistant/electrical grade phenolic. INSERTS: rass alloy. TUTOR UTTON: Moisture resistant phenolic. RING: opper alloy. PIVOT: rass alloy. MOVLE ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings greater than MP and motor load ratings less than / 5 V. Silver alloy for motor load ratings / 5 V or greater. STTIONRY ONTTS: Gold alloy for ratings MP or less. Fine silver welded to copper base for ratings greater than MP and motor load ratings less than / 5 V. Silver alloy on copper base for motor load ratings / 5 V or greater. TERMINLS: rass alloy, bright tin plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. uild--switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -50 thru -5. For additional options not shown in catalog, consult ustomer Service enter. H S S Series H Precision Switches Function S ontact Separation ".0".00".00" Electrical Rating, 5, 50, 80 V ; 0.5, 50 V ; 0, 5 V 5, 5, 50 V 6, 5, 50, 80 V ; 0.5, 50 V ; 0, 5 V ; / HP, 5 V ; / HP, 5O V F5 F9,5 V ;, O V, 5, V ; 5, 80 V ; / HP, 5 V ; / HP, 50 V Operating Force 8 oz./5 grams oz./ grams K 9 oz./55 grams K oz./68 grams oz./56 grams P 6 oz./ grams Mounting Style S Standard ctuator P0 Pin plunger 0 Lever roller 0 Stub plunger F0 Reverse acting lever roller 0 High overtravel plunger R5 Perpendicular roller plunger T0 Lever TS Sealed Lever Y0 Reverse acting lever ircuitry T Terminations Flat base, solder, -0 screws Flat base,.50" quick connect 55 Step base, cup washers, 6- screws 50 imensions are shown: Inches (mm)
2 H Series Sealed ctuator and ase To provide reliable service under environmental conditions that might damage standard precision switches, various H Series switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive. These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional information on sealed switches, consult our ustomer Service enter. SERIES H PREISION SNP-TING SWITHES FUNTION S SINGLE POLE SWITH OPER. POS..65 ±.05 (5,88 ± 0,8) Single Pole NOTE: To select switching function, see IRUITRY section, page -5. ONTT SEPRTION OE NOMINL ONTT SEPRTION (in./mm).0 (0,5).00 (,0).00 (,8) Switches with MP rating (option code F5 ) are available only with contact separation (option ). Switches with / HP, 5 V rating or greater (option codes 5 and 6 ) are not available with.0 contact separation (option code ). ONTT SEPRTION IFFERENTIL TRVEL EIFITION LIMITS FOR VRIOUS ONTT SEPRTIONS INH imensions are shown: Inch (mm)
3 H Series OPERTING FORE OE MXIMUM OPERTING FORE (OZ./GRMS) 8 5 STNR ONTT SEPRTION (inch) ONTT SEPRTION OPERTING FORE EIFITION LIMITS FOR VRIOUS ONTT SEPRTIONS OUNES K K STNR RNGE MXIMUM LIMITS VILLE P NOTE: ll listed differential travel characteristics are based on standard operating force andcontact separation. For any other force or contact separation, consult ustomer Service enter. Operating force varies with actuator option, see TUTOR option section. ELETRIL RTING OE 6 F5 F9 MOVLE ONTT Fine silver. Precious metal alloy. Gold alloy. Fine silver. STTIONRY ONTT Fine silver welded to copper base. Precious metal alloy. Gold alloy. Fine silver welded to copper base. ELETRIL RTING 5, 50 & 80 V ; V ; 0 5 V (UL). 5 5 & 50 V (UL). 5, 50 & 80 V ; V ; 0 5 V ; / 5 V ; / 50 V (UL). Low level* to 5 V ; 0 V (UL). 5 & V ; 5 80 V ; / 5 V ; / 50 V ; V (UL). * Note: See Technical ata section of this catalog for RoHS compliant and compatible definition and specifications. VILLE OMINTIONS OPERTING FORE (oz.) ELETRIL RTING 6 F5 F K K P x x x x x x x x x VILLE x NOT VILLE ll models with all options onsult ustomer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V V or max. 5 imensions are shown: Inches (mm)
4 H Series MOUNTING STYLE S Standard NOTE: Mounting holes will accept pins or screws of dia. (,5) max. on.000 ±.00 (5, ± 0,05) centers. NOTE: Torque mounting screws inlbs max. TUTOR OE 0 NO. POLES FIG. IM..86 (,8) IM.. ±.060 (8,5 ±,5) IM..8 dia. (9,Ø) IM..0 (6,) 0.9 (,).8 ± (, ± 0,5) F0 0 P0 R5 T0 TS* Y (,8).9 (,).9 (,). (,). (,).05 (,). ±.050 (8,5 ±,).860±.00 (,8±0,6).65 ±.0 (5,88 ± 0,5).6 (5,). ±.060 (8,8 ±,5). ±.060 (8,8 ±,5). ±.00 (8,9 ± 0,6).8 dia. (9,Ø) 0 dia. (,Ø).0 dia. (6,Ø)).0 dia. (6,Ø). dia. (8,8Ø). (8,8) 0.6 (5,5).65 (6,) FIG. Lever Roller FIG. Lever Roller FIG. Stub Plunger * ctuators sealed against the entrance of airborne contaminants and/or splashing liquids. 0. (8,0) ia..60 ± PNEL MOUNTING FIG. 5 Pin Plunger FIG. Plunger 0 I. (,0?) FIG. 6 Perpendicular Roller Plunger FIG. 8 Reverse cting Lever FIG. Lever 5 imensions are shown: Inch (mm)
5 H Series TUTOR OE TUTOR 0 0 F0 0 P0 R5 T0 Y0 * SELE TUTOR TS 5 K MXIMUM OPERTING FORE (OZ./GRMS) K P K.5 MINIMUM RELESE FORE (OZ./GRMS) K. 8.5 P.5.5 NOTE: For basic switch operating forces, see page -5. * ctuators sealed against the entrance of airborne contaminants and/or splashing liquids. MXIMUM IFFERENTIL TRVEL (IN/MM) MXIMUM PRETRVEL (IN/MM) MINIMUM OVERTRVEL (IN/MM) OE K K P K K P K K P.06 (,5).080 (,0).5 (,8). (,9). (,9).8.8 (,96) (,96) (,96) (,96).0005 (0,0).00 (0,05) (0,8) (0,6).00 (,0) (,0) (,0) (,0) (0,).008 (0,) (,0) 0.8 (,0).06 (,5) TUTOR 0 0 F0 0 P0 R5 T0 Y0.05 (0,8) (0,6) (0,0).0005 (0,0).00 (0,05).00 (0,08).00 (0,08) (0,).05 (0,8) (0,6) (0,6).00 (0,) (0,) (0,) (0,) (0,) (0,).05 (0,8) (0,6).00. (,58). (,58). (,58). (,58).0 (,9).08 (,98).09 (,6) (,96) (,8) (,8) (,8) (,8) (0,).009 (0,).0 (0,9) (,5) * SELE TUTOR TS.0 (,9).08 (,98).09 (,6) (,96) (,8) (,8) (,8) (,8) imensions are shown: Inches (mm) 5
6 H Series TERMINTIONS FLT SE, SOLER TERMINLS N -0 SREWS FLT SE,.50" QUIK ONNET TERMINLS NOTE: Switches with flat base option have molded ribs that provide increased creep distance. 55 STEP SE, 6- SREWS N UP WSHERS NOTE: Switches with step base option provide wide electrical clearance for screw terminal options. IRUITRY T (ouble Throw, Normally losed & Normally Open) 55 imensions are shown: Inch (mm)
PNP Series Sealed Pushbutton Switch
Sealed Switch Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options
More informationNP Series Sealed Industrial Pushbutton Switch
Sealed Industrial Switch Features/Benefits IP68 sealed,000,000 life cycle Multiple housing styles Capable of up to 5 resistive load Wirelead options available RoHS compliant Typical pplications Harsh environments
More informationGeneral Specifications
Series M Process Sealed Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity
More informationGeneral Specifications
ully Illuminated Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load)
More informationATS Document Cover Page
221-008 Item Rev Status: RELEASED printed 9/20/2017 2:27:42 PM by Les Deenin ATS: OPERATIN PROCEDURE ATS Document Cover Page Responsible Department: Supply Chain This copy is uncontrolled unless otherwise
More informationFS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
More informationBushing diameter 16 mm, 19 mm or 22 mm. Easy to clean metal surface. Very long life expectancy. Ring or dot illumination. ➀ One-piece bushing
Piezo switches Specifications Bushing diameter 6 mm, 9 mm or 22 mm UG40--R3 Sealed to IP68 and IP69K (switches mounted on panel) Easy to clean metal surface Very long life expectancy Ring or dot illumination
More information91000 Series Temperature Regulator
TEMPERTRE REGLTORS 91000 Series Temperature Regulator The Self-Op (Self-Operated Temperature Regulator) Indicating ial (Model 91400 only) ctuator istributed By: M&M Control Service, Inc. www.mmcontrol.com/trerice.php
More informationTemperature Regulator Series
Temperature Regulator 91000 Series The Self-Op 91400 pictured Self-Operating esign Indicating, Non-Indicating or Safety Models vailable eavy uty ie Cast luminum ousing 1 /2" thru 6" Valve Sizes The Series
More informationDistinctive Characteristics
Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Light Duty Miniature Toggles Series E High torque bushing prevents rotation and separation from metal
More informationCMK - CMD Performance Data/Materials
O N N E T O R S MK M Performance ata/materials Performance ata Summary Electrical: ontacts: Pin#4 WG flexible pin Socket #4 WG precision machined barrel Wire range #4 WG to #30 WG solid and stranded other
More informationExtended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
More informationBulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
More informationSANDELIUS INSTRUMENTS, INC.
SNDEIUS INSTRUMENTS, INC. To order any style on this page see below: Sandelius Style H Nipple-Union-Nipple (For spring-loading, insert an S in front of the style number) MET SHETHED OR INSUTOR TYPE EEMENT
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
mphenol 97 Series Standard ylindrical onnector 12-022-15 MIL-5015 Style onnectors widely used for: Factory utomation, Robotics Machine Tool, Instrumentation Welding quipment Medical quipment mphenol 97
More informationmin. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
More informationSpira s Connector-Seal Gaskets
s Connector-Seal Gaskets offers the best Connector-Seal gaskets on the market, providing an excellent, durable and reusable EMI and/or Environmental seal in flange-mounted connectors for the life of a
More information2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Permanent Magnet Drill STARTING SERIAL NUMBER.
69(5x) CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 120V Permanent Magnet Drill 2-20 STARTING SERIAL NUMBER G85A BULLETIN NO. 5-6-00 REVISED BULLETIN DATE Apr.
More information0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
More informationMyers Hubs. Applications: Features: Standard Materials: Certifications and Compliances: Standard Finishes: Options: Conduit Hubs.
pplications: Features: Certifications and Compliances: Standard Materials: Standard Finishes: Options: Description Suffix CP 56 www.crouse-hinds.com US: 1-866-764-5454 CN: 1-800-265-0502 Copyright 2015
More informationSERVICE PARTS LIST DEEP CUT BANDSAW D51C BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5C REVISED BULLETIN
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More informationtubular and finned tubular elements
C50-4 tubular and finned tubular elements electric heating and controls Table Of Contents Construction................................................-2 Quality Control................................................2
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationJBS Enterprise Limited. Rm B1, 1/F, Hing Win Industrial Bldg 110 How Ming Street, Kwun Tong Kowloon, Hong Kong Tel: Fax:
JBS Enterprise Limited Rm B1, 1/F, Hing Win Industrial Bldg 110 How Ming Street, Kwun Tong Kowloon, Hong Kong Tel: 852-6325 6159 Fax: 852-2670 0622 CONTENTS Company Profile...P.2 Snap-action Thermostats...P.3
More informationSPECIFICATIONS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
NEW! Series TK SPECIFICATIONS: CONTACT RATING: 200mA / 1.5A @ 5~30VDC. ELECTRICAL LIFE: 1 million cycles at full load. CONTACT RESISTANCE: 20m-ohms max. INSULATION RESISTANCE: 600VDC 10M-ohms min. ESD
More informationFlexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive
More informationBOST-BRONZ Oil-Impregnated Sintered Bronze Bearings
OST-RONZ Oil-Impregnated Sintered ronze earings OST-RONZ is oston Gear s all-purpose, oil-impregnated porous bronze bearing material. It is manufactured of highest purity metal powders by the powder metallurgy
More informationFerrite EMI Cable Cores
Ferrite EMI able ores TLOGUE OUT LIRD TEHNOLOGIES Laird Technologies designs and manufactures customized, performance-critical products for wireless and other advanced electronics applications. The company
More informationSolutions for Electronic Specialty Markets (ESM)
M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets M Electronic Specialty Markets - New Product Releases
More informationBUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
More informationSeries 1500 Engineering Data
Series 1500 Engineering ata NOTE: o not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time
More informationType 56 Butterfly Valve
Standard Features (Sizes -/2" ") Standard model (-/2" ") has Body and Disc for better chemical resistance at temperatures higher than can be achieved with. " has body and disc as standard. Our 3/3 stainless
More informationE 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min
Return Filters E 9 E E Tank top mounting Connection up to G Nominal flow rate up to l/min Description Application In the return line circuits of hydraulic systems. Performance features Protection against
More information7 mm Diameter Miniature Single-Turn Cermet Trimmer
7 mm Dimeter Miniture Single-Turn Cermet Trimmer A dust seled plsti se proteting qulity ermet trk gurntees high performne nd proven reliility. Adjustments re mde esier y the ler sle redings. is idelly
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationSTANDARD COAXIAL CONNECTORS
STANDARD COAXIAL CONNECTORS COAXI-KIT ISO 9001 APPROVED RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high
More informationLow Profile 0.5mm Pitch Connectors For FPC
Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism Features 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests
More informationAmphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
More informationELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
More informationDoveTail Collapsible Cores
ovetail ollapsible ores ovetail ore dvantages Positive mechanically actuated ollapsible ore ollapse amount: 5% to 7% per side Eliminates costly Rack and Gear Systems Enables faster mold cycle times Patented
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded
More information3M PCB Connector.100 Four Row 3400 Series
PCB Connector.00 Four Row 300 Series Low profile Standard staggered grid Variety of pin lengths and plating options available See Regulatory Information Appendix (RIA) for chemical compliance information
More information3M Pin Strip Header, 1512 Series 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight
2 2 Solder Tail Straight & Right Angle, Surface Mount Straight Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes
More informationBULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
More informationBOST-BRONZ (OIL-IMPREGNATED SINTERED BRONZE)
earings Section Contents OST-RONZ (OIL-IMPREGNTE SINTERE RONZE) General escription...136 137 Catalog Selections/imensions...138 144 ER-N-RONZ (660 CST RONZE) General escription...145 Catalog Selections/imensions...146
More informationBOST-BRONZ (OIL-IMPREGNATED SINTERED BRONZE)
earings Section Contents OST-RONZ (OIL-IMPREGNTE SINTERE RONZE) General escription...136 137 Catalog Selections/imensions...138 144 ER-N-RONZ (660 CST RONZE) General escription...145 Catalog Selections/imensions...146
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationALLIANCE weld pins are used in conjunction with ALLIANCE self-locking washers to complete the insulation fastening operation.
ALLIANCE weld pins simplify the permanent attachement of insulation to just about any kind of construction metal surface. They can be applied quickly and easily using standard CD or ARC stud welding equipment.
More informationNeodymium Magnet Range
Neodymium Magnet Range 1 Contents About Neodymium magnets Magnetic properties Options of magnet plating Series of magnets Neodymium pot magnets With countersunk hole With through hole With threaded stud
More informationglobal solutions : local support Knitted Conductive EMI Gaskets
global solutions : local support Knitted Conductive EMI Gaskets engineered antenna, emi, telematics and thermal applications Laird Technologies is committed to providing the world s leading OEMs with comprehensive
More informationTantalum Through-Hole Capacitors Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style)
Tantalum Through-Hole apacitors Hermetically Sealed Overview The KEMET standard MIL case hermetically sealed T245 Series (Extended apacitance Range) is compact, ruggedly built and designed for miniaturized
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationHeritage Quality Performance
FEP FEATURES AND PROPERTIES Heritage Quality Performance Extruded, FEP insulated, high voltage wire and cable offers exceptional dielectric strength without the disadvantages common to equally rated silicone
More informationG2D Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10075SSD-1 Section: Performance Data Dated: January, 2011
100 Best Efficiency Point 90 80 70 TDH (ft) 60 50 40 30 20 10 The curve reflects maximum performance characteristics without exceeding full load (Nameplate) horsepower. Operation is recommended near the
More informationAheAd OF the FlOw. Butterfly Valves
Catalog C-BFV-0912 AheAd OF the FlOw Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More informationFeatures. Type List. Standard Type
SONG CHUN Features /2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
More information200 Series In-Slab Pool Fittings
230 Series nti-vortex Plate 2-2 231 Series Sump 2-3 234 Series Sump 2-4 236 Series Sump 2-5 253 Series Overflow 2-6 255 Series Overflow/Drain 2-7 261 Series Vacuum Fitting 2-8 263 Series Eyeball Fitting
More information26 lairdtech.com More Info: EXAMPLE APPLICATION PART NUMBER SYSTEM EXAMPLE
FERRITE EMI CABLE CORES FERRITE EMI DISKS AND PLATES Ferrite disks and plates provide a simple, cost-effective solution for radiated and inductively-coupled electromagnetic interference. After the PC board
More informationClamp Filters (Ferrite Core with Case)
lamp Filters (Ferrite ore with ase) For automotive EU/able ZT series Type: ZT-V-K ZT Issue date: ecember 20 ll specifications are subject to change without notice. onformity to RoHS irective: This means
More informationReference Only. Spec. No. JENF243D-0006K-01 P 1/ 8
Spec. No. JENF243D-0006K-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SP X1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S
More informationThe T262 Series is ideal for filtering applications and in defense power supplies where low ESR is essential.
Tantalum Through-Hole apacitors Hermetically Sealed Overview KEMET s T262 Series (SR21 Style) hermetically sealed solid tantalum capacitors are qualified to MIL 39003/09. This series is similar to KEMET's
More informationTABLE OF CONTENTS. Product Specification Sheet Basic Use Limitations Composition & Materials Technical Data Availability Guarantees Technical Services
TLE OF ONTENTS Product Specification Sheet asic Use Limitations omposition & Materials Technical Data vailability Guarantees Technical Services MEZ onnection Systems MEZ S Series Flanges MEZ I Series Flanges
More informationAmphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationOverview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105 C and DLA Series
Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105 C and DLA Series Overview The KEMET T550 Series Polymer Hermetic Seal (PHS) is a tantalum capacitor with
More informationIPT and IPT SE Bayonet-Lock Connectors
IPT and IPT S ayonet-ock onnectors igh-ensity I--26482 Type onnectors V95328 Qualified for Rugged ilitary and Industrial pplications United States United ingdom ermany rance Nordic Italy Spain apan The
More informationHigh Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
More informationTEWA ELECTRONICS GROUP HIGH PRECISION NTC THERMISTORS AND TEMPERATURE SENSORS
TEWA TEMPERATURE SENSORS TEWA TERMICO ul. ul.litewska 14, 21-010 Łęczna, THE COMPANY PROFILE EXPERIENCE is a leading NTC Thermistor and Temperature Probe manufacturer located in Lublin, serving the European
More information1NT SERIES Fixed Temperature Thermostats
I N D U S T R I A L S E N S O R S & C O N T R O L S 1NT SERIES Fixed Thermostats Key Features ISO9000 Certification Recognized by 9 worldwide agencies % factory inspected for continuity, function and contact
More informationEmbry-Riddle Aeronautical University Signage Specifications 03/25/2008
Embry-Riddle Aeronautical University Signage Specifications 03/25/2008 The following specifications are for the fabrication, painting of signs, graphics& installation of 4 (four) typical sign designs for
More informationRosemount 1152 Alphaline Nuclear Pressure Transmitter
Product Data Sheet 00813-0100-4235 Rev BA Rosemount 1152 Rosemount 1152 Alphaline Nuclear Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per IEEE Std 323-1971 and IEEE Std 344-1975 Mild environment
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More informationSensoLyt System Design
Sensolyt Sensor Systems Measurement SensoLyt System Design For continuous measurement, especially under the difficult conditions very often found in sewage treatment facilities, very high demands are made
More information3M Pak Wall Header
M Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle, High Temp Option 000 Series S Military (with M s 518 polarizing key) and centerbump polarization S Optional ejector latches S Mounting
More informationPhone: Fax:
SEPTEMBER 2007 www.nsiindustries.com Phone: 800.321.5847 Fax: 800.841.5566 Mechanical Connectors Dual Rated Single & Double Lugs........................ 1 Panelboard Lugs............................ 1
More information8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
More informationTechnical Requirements for Electronic Parts, Materials, and Processes Used in Space and Launch Vehicles
AEROSPACE REPORT NO. TOR-2006(8583)-5236 Technical Requirements for Electronic Parts, Materials, and Processes Used in Space and Launch Vehicles 13 November 2006 Prepared by S. R. ROBERTSON, L. I. HARZSTARK,
More informationSeries Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
More informationTubular Heaters. WATROD Single/Double-Ended Heaters
Tubular eaters WTROD Single/Double-Ended eaters vailable in single- or double-ended termination styles, the versatile and economical WTROD tubular heating element from Watlow lends itself to virtually
More informationApplications R41 3 I M1 M
R41, Class Y2, 300 VAC, 110 C (Automotive Grade) Overview The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
More informationDatasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
More informationGeneral Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, VDC (Automotive Grade) Applications
General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, 50 400 VDC (Automotive Grade) Overview The R82 Series is constructed of metallized polyester film (wound or stacked
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationRECTANGULAR INFINITE POSSIBILITIES. Amphenol. Rectangular and Filtered Products. Micro-D. D-Sub. Rectangular and JN1122 ARINC 404
INFINITE POSSIBILITIES. Amphenol Micro-D D-Sub Rectangular 38999 83733 and JN1122 Rectangular and Filtered Products ARINC 404 ARINC 600 AMPHENOL MICRO-D Amphenol Phoenix Interconnect Micro Connectors provide
More informationSP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.
1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4
More informationD =3/4" D =7/8" D =1" D
Progressive eader Pins are case hardened and precision ground. nds are tapered to allow for a smooth transition during assembly and production. aterial: S 4320 Surface Hardness: 58-62 Rc Surface finish:
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
More informationFeaturing. Devices made with CuVerro Antimicrobial Copper Surfaces. EPA registered touch surfaces
Featuring Devices made with CuVerro Antimicrobial Copper Surfaces EPA registered touch surfaces Made with CuVerro Antimicrobial Copper Surfaces The Arrow Hart line of switches and wallplates featuring
More informationUnit Price Labor. INSTALL 138KV DISCONNECT SWITCH WITH MOTOR OPERATOR AND AUXILIARY SWITCHES ON EXISTING STRUCTURE 1 ea.
SUBSTATION B UPGRADE CONSTRUCTION MAJOR MATERIAL NOTES: Contractor to fill in line item column "Est. Qty." for items left blank. Construction Unit No. Description Est. Qty. Unit Labor 100 INSTALL 138KV
More information