IPT and IPT SE Bayonet-Lock Connectors

Transcription

1 IPT and IPT S ayonet-ock onnectors igh-ensity I Type onnectors V95328 Qualified for Rugged ilitary and Industrial pplications United States United ingdom ermany rance Nordic Italy Spain apan

2 The Space Shuttle Orbiter escapes earth at the speed of 17,000 miles per hour. Now rriving on Track 5015! asy-to-ssemble, Rigid lenair Series ITS Insert Reverse ayonet onnectors Ruggedized nvironmental Power and Signal onnectors Over 200 I Insert rrangements Improved Reverse ayonet oupling Now V Qualifi ed! U n i t e d S t a t e s U n i t e d i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n a p a n ommital Sp Via a ell Orbo, VINOV I STNSO OON, ITY Telephone: / r.a. - ax: / ail: commital@commital.com United States United ingdom ermany N o r d i c rance Italy Spain World of Interconnect Solutions

3 lenair IPT S and IPT Series ayonet-ock onnectors (I Type) Table of ontents Introduction IPT and IPT S onnectors IPT S Series igh Performance rimp ontact I Type ayonet onnector Section IPT Series eneral uty Solder and rimp ontact I Type ayonet onnector Section IPT S and IPT onnector ccessories and Tools Section IPT S and IPT Product Index Section 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X Intro-1 -ail: sales@glenair.com

4 Introduction IPT and IPT S onnectors lenair IPT S and IPT Series ayonet-ock onnectors (I Type) Product eatures and Specifications lenair IPT and IPT S series connectors offer rugged, high vibration performance and rapid mating for both high-performance and general duty signal connector applications. The products are environmentally sealed and can be equiped with I/RI shield termination backshell accessories. IPT S is qualified to V oth product series are in accordance with I ipt and ipt se product features and specifications eature pplications Shell onstruction escription actory equipment, off-road vehicles, military vehicles, sensors, power generators, and other industrial applications luminum shell bodies provide durable performance in a lightweight package ating System Shell Surface oatings nvironmental Sealing Temperature Tolerance ontacts ontact Plating Three pin bayonet system, 1/2 turn to full mate. range of conductive and non-conductive surface coatings including standard admium finishes as well as RoS compliant elecrostatic paint. Individual wire sealing grommets and optional environmental backshells provide moisture protection to IP67. 6, 7 and 3 plated connectors are tested to -55 to and 8 plated connectors are tested to igh performance crimp contacts and retention clips (IPT S) and general duty crimp and solder contacts (IPT) opper alloy with gold plating Wire age ontacts support wire sizes #16 - #20 gage (Size 16) and #20 - #24 (size 20) Insert aterials Insert rrangements I Shielding Shell Styles Polarization pprovals Intermateability Resilient high-insulation synthetic insert (neoprene). IPT S version includes hard plastic retention clip retainer. IPT S: 18 different power and signal insert arrangements, featuring 16 and 20 gage contacts; 3 to 61 contacts. IPT: 44 different power and signal insert arrangements, featuring 16 and 20 gage contacts; 2 to 61 contacts. Shield termination backshell accessories are available for all plug and receptacle configurations omplete range of shell styles is available, including front and rear mount flange receptacles, jam nut receptacles, bulkhead feedthrus, and straight and 90 plugs. 5 keyway configuration with optional polarization. IPT S is qualified to V oth IPT and IPT S meet all requirements of I Intermateable with all industry standard bayonet connectors designed to I and V including Veam VPT, mphenol PT and ITT annon PT lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X Intro-2 -ail: sales@glenair.com

5 lenair IPT S Series igh Performance rimp ontact ayonet-ock Signal onnectors (I Type) IPT S Series ayonet ock onnectors IPT S rings igh-performance rimp ontact Termination to I ayonet onnectors arsh pplication nvironments The lenair Series IPT S ayonet- ock Signal onnector is ideally suited for all general and environmental applications that require a high-performance military type cylindrical connector with crimp-removable contacts. Qualified to V95328, the bayonet mechanism provides fast and easy coupling, especially when the connector is situated in an awkward or hard to reach location. nvironmental protection to IP67 levels provides additional reliability and the flexibility to specify these rugged connectors in harsh applications such as in machine tools and factory automation. Supplied crimp contacts are gold-plated copper alloy. Inserts are made from high-insulation synthetic rubber, oil and temperature resistant to -55 to Intermateability The Series IPT S onnector is interchangeable and intermateable with the wide range of industry-standard bayonet connectors designed around I and/or qualified to V 95328, including ITT annon PT. igh Performance rimp Version with ontact Retention lips and Sealed Inserts 2 ontact Sizes: #20 and # Signal ontact Insert rrangements, 3 to 61 ontacts Rear-Insertion/ront Release Snap-In ontacts Intermateable with Other I Products Ruggedized ontact Retention lip nvironmentally Sealed System udible and Visual oupling Indicators eyed Polarization STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

6 IPT S Series ayonet ock onnectors lenair IPT S Series ayonet-ock igh Performance rimp ontact (I Type) Styles and lasses onnector/ackshell lass ackshells and able lamps ompression Ring rommet or land Shell Styles S IPT00S S IPT01 S...SR IPT06S S IPT07S S IPT02S No accessory threads IPT02PP ulkhead eedthrough S: or general-duty applications. This connector-backshell assembly is supplied with a general-duty backshell for the attachment of additional accessories such as S 3057 cable clamps (ordered separately). Individual wire sealing grommet supplied. S: or general-duty environmental applications using unjacketed wire bundles. dditional environmental sealing is provided through an individual wire sealing grommet in the connector and an overall cable grommet seal in the backshell. No cable clamp supplied. S...SR: Same as class S, but with cable clamp and bushing for strain-relief. S: Plug with straight backshell for heatshrink boot. S: Plug with backshell for I shield termination and/or heatshrink boot lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

7 lenair IPT S Series ayonet-ock igh Performance rimp ontact (I Type) Technical ata IPT S Series ayonet ock onnectors Service Rating lass Operating voltage Operating voltage Test voltage I II Potential rop ontact size Test current Potential drop mv mv PS Rated urrent Versus Temperature Size 20 ontacts Size 16 ontacts ilovolts RS 2 1 IT II I IIT I ctual min. flashover Ser.I IT Recommended test Ser. I II ctual min. flashover Ser. II IIT Recommended test Ser. II ltitude Pressure in Thousands of feet 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

8 IPT S Series ayonet ock onnectors lenair IPT S Series ayonet-ock igh Performance rimp ontact (I Type) ow to Order Part Number reakdown I Series I Type Shell Size and Insert rrangement onnector Shell Styles 00 - ront Panel ount Square lange Receptacle with ccessory Threads 01 - In-ine Receptacle with ccessory Threads 02 - Rear ox ount Square lange Receptacle with No ccessory Threads 02PP - Rear ox ount Square lange Through ulkhead Receptacle 06 - Straight Plug onnector with ccessory Threads 07 - Rear ox ount am Nut Receptacle od ode Options 2 - Nickel Plating (Ros) 6 - lack lectro-deposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating (Omit for Standard inish - ad/olive rab) lternate Insert Rotation Omit for Normal IPT 06 S P X SR XX nvironmental lass S - Indicates the Supplied onnector/ackshell ssembly oes Not Include a Wire Sealing rommet S, S, S - Indicates the Supplied onnector/ackshell ssembly Includes a Wire Sealing rommet ontact ender P - Pin S - Socket Plug rounding ingers Omit for Standard ccessory escription* SR - able lamp and ushing *Not Used When nvironmental lass ode Incorporates the ackshell escription See Individual atalog Pages for etails 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

9 V95328 Part Number ross Reference IPT S Series ayonet ock onnectors asic Part Number ontact rrangement lternate Insert Positions N - W - X - Y - Z V S N onnector style P - Pin contacts S - Socket contacts Omit - or Style P ulkhead eed Thrus V95328 onnectors ross Reference S lenair V95328 S 3120 IPT 00 S V95328 S 3120 IPT 00 S SR V95328 S 3122 IPT 02 S V95328 S 3124 IPT 07 S V95328 S 3124 IPT 07 S SR V95328 N.. N.. V95328 N.. N.. V95328 S 3112 IPT 02 V95328 N.. IPT 06 S V95328 S 3126 IPT 06 S SR V95328 N.. N.. V95328 N.. IPT 06 S V95328 N N.. IPT 06 S V95328 P S 3119 IPT 02 PP V95328 R N.. IPT 00 S V95328 S N.. IPT 07 S V95328 T N.. IPT 07 S V95328 U N.. N.. V95328 V N.. IPT 06 S V95328 W N.. N.. V95328 ccessories ross Reference S lenair V95328 Z1 S 3181 IPT 3181 V95328 Z1 N.. IPT 3181 V95328 Z1 N.. N.. V95328 Z2 S 3180 IPT 3180 V95328 Z2 N.. IPT 3180 V95328 Z2 N.. N.. V95328 Z3 N.. IPT 3181 N V95328 T07 N V95328 T07 N S V95328 T07 S 3115 IPT 3115 V95328 T07 N.. N lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

10 IPT S Series ayonet ock onnectors lenair IPT S Series ayonet-ock igh Performance rimp ontact (I Type) aterials and inishes TRIS SS INSRTS (Temperature Range) SUR INISS luminum lloy IW QQ--591 Shells Stainless Steel oupling Pins Stainless Steel Spring igh Insulation Synthetic Rubber (hloroprene): -55 /+125 igh Insulation Synthetic Rubber (luoroelastomer): -55 /+200 ONTTS opper lloy with old Plating Over Nickel Olive rab admium Plating IW QQ-P-416 right Nickel Plating - 2 (Ros) lack lectrodeposited Paint - 6 (Ros) lack Zn-o Plating - 7 (Ros) Olive rab Zn-o Plating - 8 STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating OIITION OS ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector The lenair IPT S miniature bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating to IP67. onductive metal shells and plating provide a reliable ground plane for I applications when connectors are combined with appropriate shield termination backshells. round springs are also available in plug versions to further enhance. Shells are keyed with five total alternate key positions. Inserts may also be clocked for additional polarization protection. The connectors are temperature rated from -55 to +125 (see page -3 for current ratings versus temperature). igh performance crimp contacts facilitate rapid assembly and repair lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

11 rimp ontact imensions Pin and Socket IPT S Series ayonet ock onnectors ø /-0.05 ø /-0 ø /-0.05 ø / in ± ±0.1 ø /-0.05 ø / ±0.15 Size 20 Pin ontact P ø / ± ±0.1 ø /-0.1 ø /-0.1 ø / ±0.2 Size 16 Pin ontact P ø /-0.05 ø / in ± ±0.15 ø /-0.05 ø /-0 ø /-0.05 ø / ±0.25 Size 20 Socket ontact S 7.37 in. ø1.05 in. ø /-0.05 ø / ± ±0.1 ø /-0.1 ø /-0.1 ø / ±0.2 Size 16 Socket ontact P ø /-0.05 ø / in lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

12 IPT S Series ayonet ock onnectors lenair IPT S Series Insert rrangement Tables and Sealing Plugs Sealing Plugs for Socket avity Part Number SIN PU INSIONS 1 ±0.1 2 ±0.2 1 ±0.1 2 ±0.3 olor IN Red IN lue 2 rrangement l. Isol. Rating 8-3 I I 6 im. contact size II I II I I I II I I II I II I II I I 61 egrees rrangement W X Y Z (120) Normal Position lternate Position with Pin ontacts lternate Position with Socket ontacts 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

13 U.S. ode IPT S Series ayonet ock onnectors -ail: sales@glenair.com -9 NIR, IN IR WY N, X lenair, Inc. Printed in U.S.. ontact egend *onsult actory lenair IPT S Series vailable Insert rrangements 3 ontacts rrangement: ontact Size: Service Rating: l l ll 5 ontacts rrangement: 14-5 ontact Size: 16 Service Rating: ll R P N N R N R P ontacts rrangement: * 12-6 ontact Size: Service Rating: l ll l R P N N R N R P R P N N R N R P R P N N R N R P ontacts rrangement: ontact Size: Service Rating: l ll R P N N R R P N N R ontacts rrangement: ontact Size: 16 Service Rating: ll R P N N R ontacts rrangement: /3 ontact Size: 8-20, Service Rating: l l R N R N R P N R N R P ontacts rrangement: ontact Size: 20 Service Rating: l 15 ontacts rrangement: ontact Size: 14-20, 1-16 Service Rating: l 16 ontacts rrangement: ontact Size: 16 Service Rating: ll 19 ontacts rrangement: ontact Size: 20 Service Rating: l

14 IPT S Series ayonet ock onnectors lenair IPT S Series vailable Insert rrangements 21 ontacts rrangement: 22-21* ontact Size: 16 Service Rating: ll 23 ontacts rrangement: ontact Size: 22-20, , 2-16 Service Rating: l l 26 ontacts rrangement: ontact Size: 20 Service Rating: l 32 ontacts rrangement: * ontact Size: Service Rating: l l 41 ontacts rrangement: * ontact Size: , Service Rating: l l 55 ontacts rrangement: ontact Size: 20 Service Rating: l 61 ontacts rrangement: ontact Size: 20 Service Rating: l ontact egend *onsult actory 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

15 lenair IPT S Series ayonet-ock igh Performance rimp (I Type) astener eight Requirements and Panel utout imensions IPT S Series ayonet ock onnectors or front panel mount square flange connectors (00) the dimension indicates the measured maximums that mounting hardware can stand proud from the connector flange before it will interfere with connector mating. or rear box mount square flange connectors (02) the same column maximum dimesions apply, but in this case the measurement taken includes the thickness of the panel wall or box (so the mounting hardware needs to be correspondingly shorter). olumn 1 defines the maximums for the 02PP bulkhead feedthrough product before mounting hardware interferes with mating PP lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

16 IPT S Series ayonet ock onnectors IPT 00 S ront Panel ount Square lange Receptacle with eneral uty ackshell IPT 00 S S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle includes sealing grommet and backshell for use with individual wires. lso includes general duty backshell for the attachment of various backend connector accessories; through mounting holes. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

17 IPT 00 S ront Panel ount Square lange Receptacle with eneral uty ackshell IPT S Series ayonet ock onnectors Shell Size 1 ax T I: INSIONS 2 in. ± ax- Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

18 IPT S Series ayonet ock onnectors IPT 00 S...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT 00 S S Z SR XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp with ushing lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle with cable clamp and bushing for cable protection; through mounting holes. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

19 IPT 00 S...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT S Series ayonet ock onnectors Shell size 1 2 in. T I: INSIONS ± Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

20 IPT S Series ayonet ock onnectors IPT 02 S Rear ox ount Square lange Receptacle IPT 02 S S Z XX I Series l Type 02 - Rear ox ount Square lange Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ox mount receptacle with through mounting holes; no rear accessory threads. 2. onnector lass S (crimp contact/environmental ) Wire sealing grommet and insert seal supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

21 IPT 02 S Rear ox ount Square lange Receptacle IPT S Series ayonet ock onnectors Shell size T I: INSIONS 2 in. ± aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version),,, = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

22 IPT S Series ayonet ock onnectors IPT 07 S Rear Panel ount am Nut Receptacle onnector with ackshell IPT 07 S S Z XX I Series l Type 07 - Rear Panel ount am Nut Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket S PPITION NOTS 1. Rear panel mount jam nut receptacle connector with simple backshell for open wire bundles. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

23 IPT 07 S Rear Panel ount am Nut Receptacle onnector with ackshell IPT S Series ayonet ock onnectors Shell size T I: INSIONS 2 in in. 4 ± 0.5 S ± UN UN UN UN UN UN UN UN aximum Weight in rams UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

24 IPT S Series ayonet ock onnectors IPT 07 S...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT 07 S S Z SR XX I Series l Type 07 - Real Panel ount am Nut Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp with ushing lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket S PPITION NOTS 1. Rear panel mount jam nut receptacle connector and backshell with cable clamp and bushing. 2. onnector/ackshell lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

25 IPT 07 S...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT S Series ayonet ock onnectors Shell size T I: INSIONS 2 in in. 4 ± 0.15 S ± UN UN UN UN UN UN UN aximum Weight in rams UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

26 IPT S Series ayonet ock onnectors IPT 06 S Straight Plug onnector with Shrinkboot ackshell IPT 06 S S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug ackshell/onnector lass S - rimp ontact/nvironmental with eatshrink oot ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS Straight plug with backshell suitable for heat shrink boot; nvironmental, connector includes wire sealing grommet. onnector lass S (crimp contact/environmental). Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. Standard contact material consists of copper alloy with gold plating over nickel. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

27 IPT 06 S Straight Plug onnector with Shrinkboot ackshell IPT S Series ayonet ock onnectors Shell size 1 T I: INSIONS ± 0.5 aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

28 IPT S Series ayonet ock onnectors IPT 06 S...SR Straight Plug onnector with ackshell, able lamp and ushing IPT 06 S S Z SR XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with cable clamp and bushing for cable protection. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

29 IPT 06 S...SR Straight Plug onnector with ackshell, able lamp and ushing IPT S Series ayonet ock onnectors Shell size 1 T I: INSIONS aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

30 IPT S Series ayonet ock onnectors IPT 06 S Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT 06 S S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector/ackshell lass S - rimp ontact/nvironmental Plug with ackshell for I Shield Termination and eat Shrink oot od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS Straight plug with backshell for heat shrink boot, and/or terminating I shielded cable. onnector/ackshell lass S (crimp contact/environmental) Wire sealing grommet supplied. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. Standard contact material consists of copper alloy with gold plating over nickel. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

31 IPT 06 S Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT S Series ayonet ock onnectors Shell size in. T I: INSIONS in. aximum Weight in rams x x x x x x x x x Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

32 IPT S Series ayonet ock onnectors IPT 06 S Straight Plug onnector with ackshell to ccommodate S3057 able lamp (Not Included) IPT 06 S S Z XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass S - rimp ontact with ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements 10 in PPITION NOTS 1. Straight plug with backshell for attachment of cable clamp S3057-// (not included). 2. onnector lass S (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

33 IPT 06 S Straight Plug onnector with ackshell to ccommodate S3057 able lamp (Not Included) IPT S Series ayonet ock onnectors Shell size 1 T I: INSIONS 2 3 in. aximum Weight in rams UN UN UN UN UN UN UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

34 IPT S Series ayonet ock onnectors IPT 02 PP Rear ox ount Square lange Receptacle Through ulkhead IPT 02 PP P/S Z XX I Series l Type od ode Options See Table II 02 - Rear ox ount Square lange Receptacle lternate Insert Rotation (W, X, Y, Z) Omit for Normal PP - Thru-ulkhead Shell Size and Insert rrangements Solid ontact ender P/P - Pin/Pin S/S - Socket/Socket P/S - Pin/Socket Socket Side Pin Side 1 4 PPITION NOTS 1. Through bulkhead receptacle with solid feedthrough contacts. Rear box mount square flange version. 2. Threaded mount holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

35 IPT 02 PP Rear ox ount Square lange Receptacle Through ulkhead IPT S Series ayonet ock onnectors Shell size 2 in. T I: INSIONS ± ± aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

36 IPT S Series ayonet ock onnectors IPT 00 S ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT 00 S S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector/ackshell lass S - rimp ontact/nvironmental with ackshell for I Shield Termination and Shrink oot od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS 1. ront panel wall mount receptacle with backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes. 2. onnector/ackshell lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

37 IPT 00 S ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT S Series ayonet ock onnectors Shell size 1 in. T I: INSIONS ± aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

38 IPT S Series ayonet ock onnectors IPT 07 S Rear Panel ount am Nut Receptacle onnector with I/Shrinkboot ackshell IPT 07 S S Z XX I Series l Type 07 - Rear ox ount am Nut Receptacle onnector lass S - rimp ontact/nvironmental with I/Shrinkboot ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements S PPITION NOTS 1. Rear panel mount jam nut receptacle with backshell for termination of I shielding and shrinkboot 2. onnector lass S (crimp contact/environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

39 IPT 07 S Rear Panel ount am Nut Receptacle onnector with I/Shrinkboot ackshell IPT S Series ayonet ock onnectors Shell size T I: INSIONS in. 5 ± ± 0.8 S ± UN UN UN UN UN UN UN UN UN aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

40 IPT S Series ayonet ock onnectors IPT 07 S Rear Panel ount am Nut Receptacle with ackshell for I Shield Termination and Shrink oot IPT 07 S S Z XX I Series l Type 07 - Rear ox ount am Nut Receptacle onnector lass S - rimp ontact/nvironmental with I/Shrinkboot ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements S PPITION NOTS 1. Rear panel mount jam nut receptacle with I shield termination/shrinkboot ackshell 2. onnector lass S (crimp contact/environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

41 IPT 07 S Rear Panel ount am Nut Receptacle with ackshell for I Shield Termination and Shrink oot IPT S Series ayonet ock onnectors Shell size T I: INSIONS in. 6 ± ± 0.8 S ± UN UN UN UN UN UN aximum Weight in rams UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

42 IPT S Series ayonet ock onnectors IPT 06 S Straight Plug onnector with I/Shrinkboot ackshell IPT 06 S S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector lass S - rimp ontact nvironmental with I/Shrinkboot ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS 1. Straight plug with grommet and I shield termination/shrinkboot backshell. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

43 IPT 06 S Straight Plug onnector with I/Shrinkboot ackshell IPT S Series ayonet ock onnectors Shell size T I: INSIONS 3 imit 4 imit 1 2 in. aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

44 IPT S Series ayonet ock onnectors IPT 01 S...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT 01 S S Z SR XX I Series l Type 01 - In-ine Receptacle onnector lass S - rimp ontact/nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket N PPITION NOTS 1. In-line receptacle with sealing grommet, cable clamp and bushing for cable protection. 2. onnector lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

45 IPT 01 S...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT S Series ayonet ock onnectors Shell size N Thread T I: INSIONS ± 0.1 aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

46 IPT S Series ayonet ock onnectors IPT 01 S In-ine Receptacle onnector with ackshell for I Shield Termination and Shrink oot IPT 01 S S Z XX I Series l Type 01 - In-ine Receptacle onnector/ackshell lass S - rimp ontact/nvironmental with I/Shrinkboot ackshell od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements 3.5 ± PPITION NOTS 1. In-line receptacle with backshell for terminating I shielding and attaching heat shrink boots. 2. onnector/ackshell lass S (crimp contact/environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

47 IPT 01 S In-ine Receptacle onnector with ackshell for I Shield Termination and Shrink oot IPT S Series ayonet ock onnectors Shell size ey T I: INSIONS ± aximum Weight in rams Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

48 To ost People It s ust a onnector ost customers have a simple expectation when they go shopping for safety-critical interconnect components: They want fast and accurate service. lenair addresses this most basic customer requirement in several different ways. irst and foremost, by providing immediate access to our technical information and product documentation: whether you prefer an office visit, the telephone, the Internet, a or a printed catalog, lenair is ready with answers to your most complex questions and design challanges. Secondly, lenair stocks thousands of popular catalog products for those situations To lenair It s a Promise when even a two or three week lead-time is just too long. We stock over 40,000 interconnect components bagged and tagged and ready for immediate shipment. nd for those situations when a customized solution is required, our engineers are fully versed in all aspects of interconnect system design: from shielding against I, to reducing weight and connector package size, to stopping corrosion and other forms of environmental damage. You have a simple expectation: fast and accurate service. t lenair, we re ready to give you exactly that. It s a promise ir Way lendale, alifornia Telephone: acsimilie: ail: sales@glenair.com United States United ingdom ermany Nordic rance Italy Spain apan

49 lenair IPT Series ayonet-ock Signal onnectors (I Type) Product ine Overview IPT Series ayonet ock onnectors n conomical onnector Solution for eneral lectronics, Industrial ontrols, Instrumentation and ilitary Vehicles arsh pplication nvironments The lenair Series IPT ayonet-ock Signal onnector is ideally suited for all interconnect applications that require a general-duty connector equipped with solder cup contacts and one-piece rubber insert. The bayonet coupling mechanism provides fast and easy mating, especially when the connector is situated in an awkward or hard to reach location. The connector s high resistance to vibration and shock provides foolproof performance in even the most rigorous application environments. nvironmental protection to IP67 levels provides additional reliability and the flexibility to specify these rugged connectors in harsh applications such as machine tools and factory automation. Supplied solder cup contacts are gold-plated over nickel. Optional crimp contacts are available, however the lenair IPT S series, with its industry standard rear-release crimp contacts and retention clip mechanism is better suited for all high-performance applications that require crimp contacts. Sealing members in the IPT series are made from resilient neoprene rubber. The standard insert material is synthetic rubber. There are 44 different size 16 and size 20 insert arrangements and nine shell sizes. Intermateability The Series IPT onnector is interchangeable and intermateable with the wide range of industry-standard bayonet connectors designed around I Series I and/or qualified to V 95328, including V VPT, mphenol PT, mphenol imited 2, and ITT annon PT. Solder up Version with Optional rimp ontacts Resilient nvironmental Inserts ast, asy ayonet oupling Over 40 Power and Signal Insert rrangements ll Shell Styles: Plug, Square lange, am-nut, etc. igh Shock and Vibration Resistance Pin ounts from 2 to 61; Size #16 and #20 ontacts udible and Visual oupling Indicators eyed Polarization 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

50 IPT Series ayonet ock onnectors lenair IPT Series ayonet-ock Signal onnectors (I Type) Product ine Overview I The lenair IPT miniature bayonet-lock connector series is based on the I Series I standard, and shares the same insert arrangements, shell dimensions, supported contacts and electrical performance ratings as I and V The I type 3-point bayonet coupling mechanism provides easy mating and positive locking resistance to vibration, shock, and other connector de-coupling forces in general duty and environmental interconnect systems such as military and commercial aircraft, medical equipment, industrial controls, factory robotics, intrumentation and other general electronic applications. omponent aterials IPT connectors are available in aluminum alloy and are supplied with a range of popular and Ros compatible shell plating finishes. ost styles are available in either a basic () version as well as an () version that ships with a wire sealing grommet for additional environmental protection. Our 2, 6 and 7 platings are Ros compliant. I and nvironmental pplications IPT Series connectors are perfectly suited for use in rugged applications where compliance directives for electromagnetical compatibility is required. complete range of I shield termination accessories are available for both overall as well as individual wire shields. quipped with the appropriate backshells and environmental sealing, the connectors are submersible for 48 hours up to a depth of two meters. onnector ccessories any of the IPT Series connectors come standard already paired with selected backshell accessories for most application requirements. See the accessory descriptions on the opposite page for more information. full range of additional connector accessories including dustcaps and I gaskets are also available. Please contact the factory for additional information or any of our worldwide sales and engineering facilities. lenair s website, also has complete information on these products, as well as other ruggedized power and signal connectors lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

51 lenair IPT Series ayonet-ock Signal onnectors (I Type) ow to Order Part Number reakdown IPT Series ayonet ock onnectors nvironmental lass, - Indicates the Supplied onnector/ ackshell ssembly oes Not Include a Wire Sealing rommet,,, - Indicates the Supplied onnector/ackshell ssembly Includes a Wire Sealing rommet W, - Indicates the Supplied onnector/ ackshell ssembly Includes an Overall able Sealing land ccessory escription* P - ackshell for ttachment of P able land P - ackshell with Plastic P able land P - ackshell with P able land P-I67 - I ackshell with P able land and IP67 evel nvironmental Sealing SR - able lamp and ushing N0 - No ackshell of ny ind Supplied N0 T - rctic oupling Nut Supplied w/out ackshell *Not Used When nvironmental lass ode Incorporates the ackshell escription See Individual atalog Pages for etails Plug rounding ingers Omit for Standard Shell Size and Insert rrangement lternate Insert Rotation Omit for Normal IPT P X SR XX I Series I Type ontact ender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) onnector Shell Styles 00 - ront Panel ount Square lange Receptacle with ccessory Threads 01 - In-ine Receptacle with ccessory Threads 02 - Rear ox ount Square lange Receptacle with No ccessory Threads 02PP - Rear ox ount Square lange Through ulkhead Receptacle 06 - Straight Plug onnector with ccessory Threads 07 - Rear ox ount am Nut Receptacle 08 - Plug onnector with 90 ackshell 26 - Rear ox ount Square lange Plug onnector od ode Options 2 - Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating (Omit for Standard inish - ad/olive rab) 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

52 IPT Series ayonet ock onnectors lenair IPT Series ayonet-ock Signal onnectors (I Type) Styles and lasses onnector/ackshell lass ackshells and able lamps ompression Ring rommet or land Shell Styles...SR...SR W IPT00 IPT01 IPT06...P IPT02 No accessory threads...p IPT07 No accessory threads IPT07 IPT lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

53 lenair IPT Series ayonet-ock Signal onnectors (I Type) Styles and lasses IPT Series ayonet ock onnectors lenair IPT Series products are typically supplied in termination assemblies that include the chosen style of connector together with a specific backshell accessory. : or general-duty applications. This non-environmental connector-backshell assembly is supplied with a general-duty backshell for the attachment of additional accessories such as S 3057 cable clamps (ordered separately). Non-environmental: no grommet supplied. : or general-duty environmental applications using individual wires. nvironmental sealing is provided through an individual wire sealing grommet in the connector and an overall cable grommet seal in the backshell. No cable clamp supplied....sr: Same as class, but with cable clamp and bushing for cable protection....sr: Same as class, but with cable clamp and bushing for cable protection. W: ong backshell to ease assembly. Incorporates metal sleeve and gland seal to provide overall cable sealing for improved environmental protection. No cable clamp provided. : Same as class W, but with cable clamp for improved strain relief....p: onnector with quick and easy to assemble P cable gland backshell. Supplied with different diameter sleeves to accommodate varying cable sizes. : Plug with straight backshell for heatshrink boot. : Plug with removable backshell for screen termination and heatshrink boot....p: Plug with straight P threaded backshell for attachment of P cable glands in compliance with IN : Non-environmental with 90 backshell for termination of I shielding. : nvironmental, includes rear wire sealing grommet and 90 backshell for I shield termination. lso vailable (Not Shown in Style and lass raphic):...p I67: Watertight connector and P cable gland backshell, resistant to IP67, suitable for I shielded cables. Supplied with different diameter sleeves to accomodate varying cable diameters lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

54 IPT Series ayonet ock onnectors lenair IPT Series ayonet-ock Signal onnectors (I Type) ross Section lange Insert ackshell ompression Ring Pin ontact oupling Nut nut Shell ackshell rommet rommet asket Insert Socket ontact ompression Ring The lenair IPT miniature bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating to IP67. onductive metal shells and plating provide a reliable ground plane for I applications when connectors are combined with appropriate shield termination backshells. round springs are also available in plug versions to further enhance. Shells are keyed with five total alternate key positions. Inserts may also be clocked for additional polarization protection. The connectors are temperature rated from -55 to +125 (see opposite page for current ratings versus temperature). Standard solder cup contact versions enable direct attachment of wire without the use of specialized crimp tools lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

55 lenair IPT Series ayonet-ock Signal onnectors (I Type) Technical ata IPT Series ayonet ock onnectors Service Rating lass Operating voltage Operating voltage Test voltage I II Potential rop ontact size Test current Potential drop mv mv PS Rated urrent Versus Temperature Size 20 ontacts Size 16 ontacts ilovolts RS 2 1 IT II I IIT I ctual min. flashover Ser.I IT Recommended test Ser. I II ctual min. flashover Ser. II IIT Recommended test Ser. II ltitude Pressure in Thousands of feet 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

56 IPT Series ayonet ock onnectors lenair IPT Series ayonet-ock Signal onnectors (I Type) aterials and inishes TRIS SS INSRTS (Temperature Range) SUR INISS luminum lloy IW QQ--591 Shells Stainless Steel oupling Pins Stainless Steel ardware igh Insulation Synthetic Rubber (hloroprene): -55 /+125 igh Insulation Synthetic Rubber (luoroelastomer): -55 /+200 ONTTS opper lloy with old Plating Over Nickel Olive rab admium Plating IW QQ-P-416 right Nickel Plating - 2 (Ros) lack lectrodeposited Paint - 6 (Ros) lack Zn-o Plating - 7 (Ros) Olive rab Zn-o Plating - 8 STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating OIITION OS ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

57 lenair IPT Series ayonet-ock Signal onnectors (I Type) ontact imensions IPT Series ayonet ock onnectors IPT Solder up ontacts ontact size Ø W wire section 20 1:16 3: mmq mmq :00 6: mmq IPT... Optional ale rimp ontacts P/N Size mmq W ± ± S S Shell Sizes 8 through 18 use the shorter contacts, designated as 16S and 20S IPT... Optional emale rimp ontacts P/N Size mmq W ± ± S S Shell Sizes 8 through 18 use the shorter contacts, designated as 16S and 20S 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

58 IPT Series ayonet ock onnectors lenair IPT Series Insert rrangement Tables and lternate Insert Positions rrangement l. Isol. Rating im. contact size rrangement egrees W X Y Z 8-2 I I I I I II I I I * I II I I I I I II I /3 II / * I I I I I 2 x II I I I II * I I II I * I * I * I I * II * I I I * I I I * onsult actory Normal Position lternate Position with Pin ontacts lternate Position with Socket ontacts 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

59 lenair IPT Series lternate ey Positions IPT Series ayonet ock onnectors N Polarization Shell size α β χ δ ψ Polarization Shell size α β χ δ ψ Polarization Shell size α β χ δ ψ Polarization Shell size α β χ δ ψ Polarization Shell size α β χ δ ψ The 3 mating pins are 120 spaced. The picture shows a receptacle connector. The key orientation on plug connectors is clockwise. IW S lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

60 IPT Series ayonet ock onnectors lenair IPT Series ayonet-ock Signal onnectors (I Type) astener eight Requirements and Panel utout imensions or front panel mount square flange connectors (00) the dimension indicates the measured maximums that mounting hardware can stand proud from the connector flange before it will interfere with connector mating. or rear box mount square flange connectors (02) the same column maximum dimesions apply, but in this case the measurement taken includes the thickness of the panel wall or box (so the mounting hardware needs to be correspondingly shorter). olumn 1 defines the maximums for the 02PP bulkhead feedthrough product before mounting hardware interferes with mating PP lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

61 lenair IPT Series vailable Insert rrangements 2 ontacts rrangement: ontact Size: 16 Service Rating: l ll l Service Rating: ll 3 ontacts 8-33 ontact Size: Service Rating: l l l ontact Size: ll Service Rating: l l ll l l R N R N P Service Rating: ll Service Rating: ll 3 N R R NR R N N N R N R P P R N R N 12-6 rrangement: / ontact Size: 8-20, l Service Rating: l l R N N N R R N R N R R N R N P PP R N R N P P ontact egend 2008 lenair, Inc ontacts R N *onsult actory RRN N N R P R N P P P R R R N R N N N R R N R N R N N NIR, IN IR WY N, X ail: sales@glenair.com -13 P Printed in U.S.. U.S. ode * ll 20 l R R N R P N R P ontact Size: rrangement: Service Rating: ontact Size: 11 ontacts 16 6 ontacts 4 ontact Size: rrangement: R N R N R N R N P N R N NR R P P P rrangement: 10 ontacts ontact Size: 20 Service Rating: ontact Size: ontacts l rrangement: rrangement: Service Rating: rrangement: ontacts ontacts rrangement: ontact Size: 7 ontacts rrangement: IPT Series ayonet ock onnectors P N N

62 IPT Series ayonet ock onnectors lenair IPT Series vailable Insert rrangements 14 ontacts N R P R N 21 ontacts rrangement: * ontact Size: Service Rating: l l rrangement: 22-21* ontact Size: 16 Service Rating: ll 15 ontacts 23 ontacts rrangement: ontact Size: 14-20, 1-16 Service Rating: l rrangement: ontact Size: 22-20, , 2-16 Service Rating: l l 16 ontacts 24 ontacts rrangement: ontact Size: 16 Service Rating: ll rrangement: 22-24* ontact Size: 20 Service Rating: l 18 ontacts rrangement: 14-18* ontact Size: 20 Service Rating: l 25 ontacts rrangement: 20-25* ontact Size: 20 Service Rating: l 19 ontacts rrangement: ontact Size: 20 Service Rating: l 26 ontacts rrangement: ontact Size: 20 Service Rating: l ontact egend *onsult actory 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

63 lenair IPT Series vailable Insert rrangements IPT Series ayonet ock onnectors 27 ontacts rrangement: 20-27* ontact Size: 20 Service Rating: l 41 ontacts rrangement: * ontact Size: , Service Rating: l l 30 ontacts rrangement: 18-30* ontact Size: 29-20, 1-16 Service Rating: l 39 ontacts rrangement: 20-39* ontact Size: 37-20, 2-16 Service Rating: l 32 ontacts rrangement: * ontact Size: Service Rating: l l 55 ontacts rrangement: ontact Size: 20 Service Rating: l 34 ontacts rrangement: ontact Size: 20 Service Rating: l 61 ontacts rrangement: ontact Size: 20 Service Rating: l 36 ontacts ontact egend *onsult actory rrangement: ontact Size: 20 Service Rating: l 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

64 IPT Series ayonet ock onnectors IPT 00 ront Panel ount Square lange Receptacle with ackshell IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel wall mount receptacle with backshell for the attachment of additional accessories; through mounting holes. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

65 IPT 00 ront Panel ount Square lange Receptacle with ackshell IPT Series ayonet ock onnectors Shell size min. T I: INSIONS Thread in inches ±0.4 ±0.1 ± UN UN UN UN UN UN UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

66 IPT Series ayonet ock onnectors IPT 00...P ront Panel ount Square lange Receptacle with ackshell for Use with P able lamp (lamp Not Included) IPT S Z P16 XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal PPITION NOTS 1. ront panel mount square flange receptacle with backshell for use with P clamp (not included). Other P sizes and types available on request. Includes rear threads for attachment of various backend connector accessories; through mounting holes. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

67 IPT 00...P ront Panel ount Square lange Receptacle with ackshell for Use with P able lamp (lamp Not Included) IPT Series ayonet ock onnectors Shell size ax T I: INSIONS ax P Thread ±0.1 ±0.4 ± / / 13.5 / / 13.5 / / / / 16 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

68 IPT Series ayonet ock onnectors IPT 00...P ront Panel ount Square lange Receptacle with ackshell and P able land IPT S Z P16 XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal PPITION NOTS 1. ront panel mount square flange receptacle with backshell and plastic P cable gland. Other P sizes and types available upon request; through mounting holes. 2. onnector/ackshell lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

69 IPT 00...P ront Panel ount Square lange Receptacle with ackshell and P able land IPT Series ayonet ock onnectors Shell size ax min. - max. T I: INSIONS P Thread ±0.1 ±0.4 ± / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / / 9-14 / / 16 / / 9-14 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

70 IPT Series ayonet ock onnectors IPT 00...P ront Panel ount Square lange Receptacle with P ackshell and Sleeves to ccommodate Various able Sizes IPT S Z P11 XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal PPITION NOTS 1. ront panel mount square flange receptacle with backshell and P cable clamp. Rubber sleeves included to allow use of different diameter cables. 2. onnector lass (non-environmental) no grommet supplied. P connector accessory provides environmental sealing to IP Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

71 IPT 00...P ront Panel ount Square lange Receptacle with P ackshell and Sleeves to ccommodate Various able Sizes IPT Series ayonet ock onnectors Shell size P.N. P T I: INSIONS min. - max. ±0.4 ± / / / 22 / / / ±0.12 Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

72 IPT Series ayonet ock onnectors IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, ushing and able lamp IPT S Z SR XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp with ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle with backshell, bushing and cable clamp; through mounting holes. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

73 IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, ushing and able lamp IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS ±0.4 ±0.1 ±0.12 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

74 IPT Series ayonet ock onnectors IPT 00 ront Panel ount Square lange Receptacle with eneral uty ackshell IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle includes sealing grommet and backshell for use with individual wires. lso includes general duty backshell for the attachment of various backend connector accessories; through mounting holes. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

75 IPT 00 ront Panel ount Square lange Receptacle with eneral uty ackshell IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.4 ±0.1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

76 IPT Series ayonet ock onnectors IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT S Z SR XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp with ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle with cable clamp and bushing for cable protection; through mounting holes. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

77 IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS ±0.4 ±0.1 ±0.12 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

78 IPT Series ayonet ock onnectors IPT 00 ront Panel ount Square lange Receptacle with Shrink oot ackshell IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector/ackshell lass - nvironmental with eat Shrink oot ackshell Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle with sealing grommet and backshell for heat shrink boot; through mounting holes. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

79 IPT 00 ront Panel ount Square lange Receptacle with Shrink oot ackshell IPT Series ayonet ock onnectors Shell size ± T I: INSIONS ±0.4 ±0.1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

80 IPT Series ayonet ock onnectors IPT 00 ront Panel ount Square lange Receptacle with ong ackshell and able lamp IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector/ackshell lass - nvironmental with ong ackshell and able lamp Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel mount square flange receptacle with long backshell, incorporated metal sleeve, gland seal and cable clamp; through mounting holes. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

81 IPT 00 ront Panel ount Square lange Receptacle with ong ackshell and able lamp IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS ±0.4 ±0.1 ±0.12 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

82 IPT Series ayonet ock onnectors IPT 00 ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector/ackshell lass - nvironmental with ackshell for I Shield Termination and Shrink oot Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel wall mount receptacle with backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

83 IPT 00 ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ±0.4 ±0.1 ± ey Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

84 IPT Series ayonet ock onnectors IPT 00 W ront Panel ount Square lange Receptacle with ong ackshell, etal Sleeve and land Seal IPT S Z XX I Series l Type 00 - ront Panel ount Square lange Receptacle onnector/ackshell lass W - nvironmental with ong ackshell, etal Sleeve and land Seal Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ront panel wall mount receptacle with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided; through mounting holes. 2. onnector/ackshell lass W (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

85 IPT 00 W ront Panel ount Square lange Receptacle with ong ackshell, etal Sleeve and land Seal IPT Series ayonet ock onnectors Shell size min. T I: INSIONS ±0.4 ±0.1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

86 IPT Series ayonet ock onnectors IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT S Z XX I Series l Type 01 - In-ine Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with general duty backshell. 2. onnector lass (non-environmental no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

87 IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT Series ayonet ock onnectors Shell size min. T I: INSIONS Thread in inches ± UN UN UN UN UN UN UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

88 IPT Series ayonet ock onnectors IPT 01...P In-ine Receptacle onnector with ackshell for ttachment of P able land IPT S Z P16 XX I Series l Type 01 - In-ine Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal P PPITION NOTS 1. In-line receptacle with backshell adapter threaded for use with P cable glands (not included). Other types of P adapters can be supplied in various sizes and angles upon request. 2. onnector lass (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

89 IPT 01...P In-ine Receptacle onnector with ackshell for ttachment of P able land IPT Series ayonet ock onnectors Shell size T I: INSIONS ax ax P Thread ± / / 13.5 / / 13.5 / / / / 16 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

90 IPT Series ayonet ock onnectors IPT 01...P In-ine Receptacle onnector with ackshell and Plastic P able land IPT S Z P16 XX I Series l Type 01 - In-ine Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal PPITION NOTS 1. In-line receptacle with backshell and plastic P cable gland. Other types of P adapters can be supplied in various sizes and angles upon request. 2. onnector lass (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

91 IPT 01...P In-ine Receptacle onnector with ackshell and Plastic P able land IPT Series ayonet ock onnectors Shell size ax T I: INSIONS min. - max. P Thread ± / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / , / 9-14 / / 16 / / 9-14 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

92 IPT Series ayonet ock onnectors IPT 01...P In-ine Receptacle onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT S Z P11 XX I Series l Type 01 - In-ine Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements ontact ender P - Pin S - Socket od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal PPITION NOTS 1. In-line receptacle with a P backshell that assures an excellent mechanical and waterproof seal to IP65 when used with correct neoprene sealing bushing. Rubber sleeves included to allow use of different diameter cables. 2. onnector lass (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

93 IPT 01...P In-ine Receptacle onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT Series ayonet ock onnectors Shell size P.N. P T I: INSIONS min. - max. ± / / / 22 / / / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

94 IPT Series ayonet ock onnectors IPT 01...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT S Z SR XX I Series l Type 01 - In-ine Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with backshell, cable clamp and bushing for cable protection. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

95 IPT 01...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors T I: INSIONS Shell size ±0.25 ±0.1 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

96 IPT Series ayonet ock onnectors IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT S Z XX I Series l Type 01 - In-ine Receptacle onnector lass - nvironmental with Rear Wire Sealing rommet Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. onnector lass (environmental) Wire sealing grommet and general duty backshell supplied. 2. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 3. Standard contact material consists of copper alloy with gold plating over nickel. 4. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

97 IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT Series ayonet ock onnectors Shell size T I: INSIONS ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

98 IPT Series ayonet ock onnectors IPT 01...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT S Z SR XX I Series l Type 01 - In-ine Receptacle onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with sealing grommet, cable clamp and bushing for cable protection. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

99 IPT 01...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.25 ±0.1 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

100 IPT Series ayonet ock onnectors IPT 01 In-ine Receptacle onnector with Shrink oot ackshell IPT S Z XX I Series l Type 01 - In-ine Receptacle onnector/ackshell lass - nvironmental with Shrink oot ackshell Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with sealing grommet and backshell for heat shrink sleeves. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

101 IPT 01 In-ine Receptacle onnector with Shrink oot ackshell IPT Series ayonet ock onnectors Shell size ±0,1 T I: INSIONS Ø Ø Ø Ø ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

102 IPT Series ayonet ock onnectors IPT 01 In-ine Receptacle onnector with ackshell, able lamp and Sleeve IPT S Z XX I Series l Type 01 - In-ine Receptacle onnector/ackshell lass - nvironmental with ackshell and able lamp Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with backshell, incorporated metal sleeve and cable clamp. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

103 IPT 01 In-ine Receptacle onnector with ackshell, able lamp and Sleeve IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.25 ±0.1 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

104 IPT Series ayonet ock onnectors IPT 01 W In-ine Receptacle onnector with ong ackshell, etal Sleeve and land Seal IPT 01 W S Z XX I Series l Type 01 - In-ine Receptacle onnector/ackshell lass W - nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided. 2. onnector/ackshell lass W (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

105 IPT 01 W In-ine Receptacle onnector with ong ackshell, etal Sleeve and land Seal IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

106 IPT Series ayonet ock onnectors IPT 01 In-ine Receptacle onnector with ackshell for I Shield Termination and Shrink oot IPT S Z XX I Series l Type 01 - In-ine Receptacle onnector/ackshell lass - nvironmental with ackshell for I Shield Termination and Shrink oot Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. In-line receptacle with backshell for terminating I shielding and attaching heat shrink boots. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

107 IPT 01 In-ine Receptacle onnector with ackshell for I Shield Termination and Shrink oot IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ey ax ± : : : : : : Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

108 IPT Series ayonet ock onnectors IPT 02 PP Rear ox ount Square lange Receptacle Through ulkhead IPT 02 PP P/S Z XX I Series l Type 02 - Rear ox ount Square lange Receptacle PP - Thru-ulkhead Shell Size and Insert rrangements od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal Solid ontact ender P/P - Pin/Pin S/S - Socket/Socket P/S - Pin/Socket PPITION NOTS 1. Through bulkhead receptacle with solid feedthrough contacts. Rear box mount square flange version. 2. Threaded mount holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

109 IPT 02 PP Rear ox ount Square lange Receptacle Through ulkhead IPT Series ayonet ock onnectors Shell size T I: INSIONS ± ±0.4 ±0.1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

110 IPT Series ayonet ock onnectors IPT 02 and IPT 02 Rear ox ount Square lange Receptacle IPT S Z XX I Series l Type 02 - Rear ox ount Square lange Receptacle onnector lass - Non-nvironmental - nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. ox mount receptacle with threaded mounting holes; no rear accessory threads. 2. onnector lass (non-environmental). onnector lass (environmental) Wire sealing grommet and insert seal supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

111 IPT 02 and IPT 02 Rear ox ount Square lange Receptacle IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.4 ±0.1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

112 IPT Series ayonet ock onnectors IPT 02 Y Rear ox ount Square lange Receptacle with Printed ircuit oard Terminations IPT 02 Y S Z XX I Series l Type 02 - ront ox ount Square lange Receptacle onnector lass Y - P Tails No ccessory Threads od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS 1. Rear box mount square flange receptacle with P tails and no accessory threads. Printed circuit board terminations. ontact factory for custom tail lengths. 2. onnector lass Y Receptacle with P tails. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

113 IPT 02 Y Rear ox ount Square lange Receptacle with Printed ircuit oard Terminations IPT Series ayonet ock onnectors Shell Size ±0.4 Shell size T I: INSIONS ±0.1 ±0.4 ±0.1 ± T I: INSIONS (ontinued from bove) Y Y1 Y2 YS Y Y Y ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) ±0.2 ±0.4 T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ±0.2 ssembly with ccessories (Omit for Standard Version) ±0.4 ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector ±0.2 ±0.4 ±0.2 STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

114 IPT Series ayonet ock onnectors IPT 06...N0 Straight Plug onnector with ccessory Threads IPT S Z N0 XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II No ackshell of ny ind Supplied ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug without backshell. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

115 IPT 06...N0 Straight Plug onnector with ccessory Threads IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.2 Thread in inches Ø UN UN UN UN UN UN UN UN UN ±0.2 Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

116 IPT Series ayonet ock onnectors IPT 06...N0 T Straight Plug onnector with ccessory Threads and rctic oupling Nut IPT S Z N0T XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II rctic oupling Nut Supplied Without ackshell ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with rctic coupling nut (IW S ) and no backshell. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

117 IPT 06...N0 T Straight Plug onnector with ccessory Threads and rctic oupling Nut IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.2 Thread in inches Ø UN UN UN UN UN UN UN UN UN ±0.2 Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

118 IPT Series ayonet ock onnectors IPT 06 Straight Plug onnector with ackshell to ccommodate S3057 able lamp (Not Included) IPT S Z XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with backshell for attachment of cable clamp S3057-// (not included). 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

119 IPT 06 Straight Plug onnector with ackshell to ccommodate S3057 able lamp (Not Included) IPT Series ayonet ock onnectors Shell size min. T I: INSIONS Thread in inches UN UN UN UN UN UN UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

120 IPT Series ayonet ock onnectors IPT 06...P Straight Plug onnector with ackshell for Use with P lands (Not Included) IPT S Z P16 XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal Solid ontact ender P/S - Pin/Socket PPITION NOTS 1. Straight plug with backshell for use with P glands (not included). Other P sizes and types available upon request. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

121 IPT 06...P Straight Plug onnector with ackshell for Use with P lands (Not Included) IPT Series ayonet ock onnectors Shell size T I: INSIONS ax P thread / 9 19: / 13.5 / / 13.5 / / / / 16 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

122 IPT Series ayonet ock onnectors IPT 06...P Straight Plug onnector with ackshell and P able land IPT S Z P16 XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with backshell and plastic P cable gland. Other P sizes and types available upon request. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

123 IPT 06...P Straight Plug onnector with ackshell and P able land IPT Series ayonet ock onnectors Shell size ax T I: INSIONS min. - max. P thread ax / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / / 9-14 / / 16 / / 9-14 / / 16 / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

124 IPT Series ayonet ock onnectors IPT 06...P Straight Plug onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT S Z P18 XX I Series l Type rounding ingers (Omit for Standard) 06 - Straight Plug onnector lass -Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with P backshell includes rubber sleeves to allow use of different diameter cables. 2. onnector lass (non-environmental) no grommet supplied. P connector accessory provides environmental sealing to IP Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

125 IPT 06...P Straight Plug onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT Series ayonet ock onnectors Shell size P.N. P T I: INSIONS min / / / 22 / / / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

126 IPT Series ayonet ock onnectors IPT 06...P I67 Straight Plug onnector with ackshell for I Shield Termination IPT S Z P18I67 XX I ayonet rounding inger (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangement od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (Omit for Normal) ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug and backshell with P cable clamp suitable for sheilded cables. Rubber sleeves included to allow use of different diameter shielded cables. 2. onnector lass (non-environmental) no grommet supplied. Note P connector accessory provides environmental sealing to IP Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

127 IPT 06...P I67 Straight Plug onnector with ackshell for I Shield Termination IPT Series ayonet ock onnectors Shell size P.N. P T I: INSIONS min. - max. ax / / / 22 / / / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

128 IPT Series ayonet ock onnectors IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT S Z SR XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with cable clamp and bushing. 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

129 IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS min. ±0.4 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

130 IPT Series ayonet ock onnectors IPT 06 Straight Plug onnector with eneral uty ackshell IPT S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with grommet and simple backshell for use with open wire bundles. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

131 IPT 06 Straight Plug onnector with eneral uty ackshell IPT Series ayonet ock onnectors Shell size T I: INSIONS ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

132 IPT Series ayonet ock onnectors IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT S Z SR XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp and ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with cable clamp and bushing for cable protection. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

133 IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS min. ±0.4 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

134 IPT Series ayonet ock onnectors IPT 06 Straight Plug onnector with ackshell for eat Shrink oot IPT S Z XX I Series l Type 06 - Straight Plug rounding inger (Omit for Standard) ackshell/onnector lass - nvironmental with ackshell for eatshrink oot Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with backshell suitable for heat shrink boot; nvironmental, connector includes wire sealing grommet. 2. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 3. Standard contact material consists of copper alloy with gold plating over nickel. 4. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

135 IPT 06 Straight Plug onnector with ackshell for eat Shrink oot IPT Series ayonet ock onnectors Shell size ±0,1 T I: INSIONS Ø Ø Ø Ø Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

136 IPT Series ayonet ock onnectors IPT 06 Straight Plug onnector with ong ackshell, etal Sleeve, able Sealing land, and able lamp IPT S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector/ackshell lass - nvironmental, Includes ong ackshell, etal Sleeve and Overall able Sealing land Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with long backshell, incorporated metal sleeve, gland seal and cable clamp. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

137 IPT 06 Straight Plug onnector with ong ackshell, etal Sleeve, able Sealing land, and able lamp IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.25 ±0.4 N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternatess N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

138 IPT Series ayonet ock onnectors IPT 06 Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector/ackshell lass - nvironmental Plug with ackshell for I Shield Termination and eat Shrink oot Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with backshell for heat shrink boot, and/or terminating I shielded cable. 2. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 3. Standard contact material consists of copper alloy with gold plating over nickel. 4. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

139 IPT 06 Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ey ax Q : : : : : : : Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

140 IPT Series ayonet ock onnectors IPT 06 W Straight Plug onnector with ong ackshell and able Sealing land IPT 06 W S Z XX I Series l Type rounding inger (Omit for Standard) 06 - Straight Plug onnector/ackshell lass W - nvironmental; ackshell Includes an Overall able Sealing land Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Straight plug with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided. 2. onnector/ackshell lass W (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

141 IPT 06 W Straight Plug onnector with ong ackshell and able Sealing land IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

142 IPT Series ayonet ock onnectors IPT 07 Rear ox ount am Nut Receptacle onnector IPT S Z XX I Series l Type 07 - Rear ox ount am Nut Receptacle onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Real box mount jam nut receptacle; No accessory threads. 2. onnector lass (non-environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

143 IPT 07 Rear ox ount am Nut Receptacle onnector IPT Series ayonet ock onnectors Shell size ±0.4 ±1 min. T I: INSIONS Thread in inches UN UN UN UN UN UN UN UN UN ±0.4 ±0.4 S ±0.4 Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

144 IPT Series ayonet ock onnectors IPT 07 Rear Panel ount am Nut Receptacle onnector with ackshell IPT S Z XX I Series l Type 07 - Rear Panel ount am Nut Receptacle onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Rear panel mount jam nut receptacle connector with simple backshell for open wire bundles. 2. onnector lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

145 IPT 07 Rear Panel ount am Nut Receptacle onnector with ackshell IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.4 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

146 IPT Series ayonet ock onnectors IPT 07...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT S Z SR XX I Series l Type 07 - Real Panel ount am Nut Receptacle onnector lass - nvironmental Shell Size and Insert rrangements od ode Options See Table II able lamp with ushing ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Rear panel mount jam nut receptacle connector and backshell with cable clamp and bushing. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

147 IPT 07...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT Series ayonet ock onnectors Shell size ±0.25 T I: INSIONS ±0.4 ±0.4 ax N Thread Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

148 IPT Series ayonet ock onnectors IPT 07 Y Rear ox ount am Nut Receptacle with Printed ircuit oard ontacts IPT 07Y S Z XX I Series l Type 07Y - Rear ox ount am Nut Receptacle with Printed ircuit oard ontacts Shell Size and Insert rrangements od ode Options See Table II lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Rear box mount jam nut receptacle connector with printed circuit board contacts. 2. onnector Style Y Includes P tails. ontact factory for custom tail lengths. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

149 IPT 07 Y Rear ox ount am Nut Receptacle with Printed ircuit oard ontacts IPT Series ayonet ock onnectors Shell size Shell size ± T I: INSIONS min. Thread in inches ±0.4 ± UN UN UN UN UN UN UN UN UN T I: INSIONS (ontinued from bove) S ±0.4 Y Y1 Y2 YS Y Y Y ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

150 IPT Series ayonet ock onnectors IPT 08 Plug onnector with 90 I Shield Termination ackshell Suitable for S3057 able lamp (Not Included) IPT S Z XX I Series l Type rounding inger (Omit for Standard) ackshell onnector/ackshell lass - Non-nvironmental with ackshell for I Shield Termination Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Plug with 90 backshell for cable clamp S3057-// (not included). 2. onnector/ackshell lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

151 IPT 08 Plug onnector with 90 I Shield Termination ackshell Suitable for S3057 able lamp (Not Included) IPT Series ayonet ock onnectors Shell size T I: INSIONS Thread in inches ± UN UN UN UN UN UN UN UN UN ±1 Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

152 IPT Series ayonet ock onnectors IPT 08...P Plug onnector with 90 P ackshell and Sleeves to ccommodate Various able Sizes IPT S Z P18 XX I Series l Type rounding inger (Omit for Standard) Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II P Thread Size See Table I ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Plug with 90 backshell and P cable clamp. The P cable clamp assures excellent mechanical and waterproof sealing if used with the correct neoprene sealing sleeves. 2. onnector lass (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

153 IPT 08...P Plug onnector with 90 P ackshell and Sleeves to ccommodate Various able Sizes IPT Series ayonet ock onnectors Shell size P.N. P T I: INSIONS min. - max. ax / / / 22 / / / Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

154 IPT Series ayonet ock onnectors IPT 08 Plug onnector with 90 ackshell Suitable for S 3057 able lamp IPT S Z XX I Series l Type rounding inger (Omit for Standard) Plug onnector/ackshell lass - nvironmental Plug onnector with Wire Sealing rommet and 90 ackshell od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket Shell Size and Insert rrangements PPITION NOTS 1. Plug with 90 backshell, sealing grommet and 90 ackshell suitable for S3057 cable clamp. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

155 IPT 08 Plug onnector with 90 ackshell Suitable for S 3057 able lamp IPT Series ayonet ock onnectors Shell size T I: INSIONS ±1 ± Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

156 IPT Series ayonet ock onnectors IPT 08 Plug onnector with 90 ackshell for Shield Termination and Shrink oot IPT S Z XX I Series l Type rounding inger (Omit for Standard) Plug onnector/ackshell lass - nvirionmental Plug with 90 ackshell Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Plug with 90 backshell for terminating shielded cable. lso suitable for heat shrink boots. 2. onnector/ackshell lass (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

157 IPT 08 Plug onnector with 90 ackshell for Shield Termination and Shrink oot IPT Series ayonet ock onnectors Shell size T I: INSIONS min. ey ax Q : : : : : : : Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

158 IPT Series ayonet ock onnectors IPT 26 ox ount Rear lange Plug onnector IPT S Z XX I Series l Type rounding inger (Omit for Standard) 26 - ox ount Square lange Plug onnector lass - Non-nvironmental Shell Size and Insert rrangements od ode Options See Table II ontact Type - rimp (Omit for Solder up) lternate Insert Rotation (W, X, Y, Z) Omit for Normal ontact ender P - Pin S - Socket PPITION NOTS 1. Square flange box mount plug connector to be mated with In-line receptacles (IPT01). 2. onnector lass (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

159 IPT 26 ox ount Rear lange Plug onnector IPT Series ayonet ock onnectors Shell size T I: INSIONS ±0.4 ±0.1 thread UN UN UN UN Shell inish (Omit for Standard ad/olive rab inish) 2 - right Nickel Plating (Ros) T II: OIITION OS 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ssembly with ccessories (Omit for Standard Version) ey Polarization (Omit for N version) W, X, Y, Z = lternates N0 - onnector ess ackshell XXX - ustom esigned onnector STNR INISS (or QQ--591 luminum Shells) Requirements IW RoS Not IW RoS 2 lectrolytic Nickel 6 lack Non onductive 7 lack onductive 3 admium with Olive rab Passivation 8 Zinc obalt with Olive rab Passivation Thermal Shock Salt Spray fter Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour lectical onductivity Very ood NO Very ood Very ood ood brasion Resistance Very ood Very ood ood Very ood ood 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

160 Introducing The Series 80 ighty ouse onnector Phenomenal Performance; Itty-itty Package The iniaturized onnector amily with Integrated I Shield Termination When electronic systems expand in number and complexity in military air, sea and ground applications, the available space for interconnect cabling is reduced. nd when the latest generation of land vehicle, fighter jet or Navy ship needs to accommodate more systems and controls than ever before and still weigh less than it did last time then reducing connector package size and weight becomes a critical concern. That's why lenair designed the ighty ouse with an integral shield termination platform. The ability to use the connector as is without the need to mount an accessory backshell further reduces the already lightweight package size of this small but mighty connector ir Way lendale, alifornia Telephone: acsimile: mail: sales@glenair.com United States United ingdom ermany N o r d i c rance Italy Spain

161 IPT S and IPT (I Type) onnector ccessories and Tools IPT ayonet ock onnector ccessories ull range of Standard I Type able lamps and onnector ccessories for IPT S and IPT Series Products omplete lexibility in Ordering The lenair Series IPT S and IPT (I Type) ayonet-ock onnector family is designed for the ultimate convenience in ordering. ommon connector and backshell combinations are available in sections and of this catalog. This section offers some additional accessories for mechanical, environmental and requirements. any part numbers are ready for immediate same-day shipment. The tooling offered includes manual and pneumatic crimp tools and contact insertion and removal devices. Tools are specified according to contact genders and gage. See the table on page -12. ull ine of onnector and ontact ssembly Tools eneral uty and nvironmental able lamps Protective overs ummy Stowage Receptacles and ounting askets ll Standard aterials and inishes 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

162 IPT ayonet ock onnector ccessories IT able lamp IT I ccessory asic Part Number and Shell Size inish Options (See Table II) T II: Shell inish Omit for Standard ad/olive rab inish 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating PPITION NOTS eneral duty cable clamp suitable for jacketed cable or wires protected by tubing. T I: INSIONS ommital P/N Shell size Sleeve to use Thread in inches IT IT UN 20.6 IT IT UN 21.0 IT IT UN 22.2 IT IT UN 24.0 IT IT UN 28.5 IT IT N 24.0 IT IT N 24.0 IT IT N 26.0 IT IT N lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

163 IT able lamp IPT ayonet ock onnector ccessories IT I ccessory asic Part Number and Shell Size inish Options (See Table II) T II: Shell inish Omit for Standard ad/olive rab inish 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating PPITION NOTS Waterproof cable clamp suitable for jacketed cable or wires protected by tubing. ssures watertight integrity of connector. ommital P/N Shell size Sleeve to use T I: INSIONS min. Thread in inches V Thread IT IT UN N IT IT UN N IT IT / UN N IT IT / UN N IT IT / UN N IT IT / N N IT IT / N N IT IT / 12 / N N IT IT / 12 / N N 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

164 IPT ayonet ock onnector ccessories IT 3420 and IT Neoprene Sleeve IT I ccessory asic Part Number and Shell Size Ø Ø Ø T I: SS PS odice ommital ommital P/N ±0.1 ±0.1 ±0.1 ±0.1 IT IT IT IT : IT IT IT : Ø Ø T II: SS PS odice ommital ommital P/N ±0.1 ±0.1 ±0.1 IT IT IT : IT : IT IT : IT PPITION NOTS IT3420 : Neoprene sleeve for protection and reduction, used with class cable clamps. IT3420- : Neoprene sleeve for protection and reduction, used with class cable clamps lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

165 IPT and IPT Protective Plug overs IPT ayonet ock onnector ccessories IPT I ccessory asic Part Number and Shell Size anyard Style - hain - Nylon hord inish Options (See Table II) xample: IPT (Stainless Steel hain) xample: IPT (Nylon ord) PPITION NOTS etal cap and stainless steel chain for plugs. T II: Shell inish Omit for Standard ad/olive rab inish 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ommital P/N T I: INSIONS Shell size min. IPT : IPT IPT : IPT : IPT IPT IPT IPT IPT lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

166 IPT ayonet ock onnector ccessories IPT and IPT Protective Receptacle overs IPT I ccessory asic Part Number and Shell Size anyard Style - hain - Nylon hord inish Options (See Table II) xample: IPT (Stainless Steel hain) xample: IPT (Nylon ord) T II: Shell inish Omit for Standard ad/olive rab inish 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ommital P/N T I: INSIONS Shell size min. IPT IPT IPT IPT IPT IPT IPT IPT IPT lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

167 IPT 3181-N and IPT 3181-N Protective Receptacle overs IPT ayonet ock onnector ccessories IPT N 2 I ccessory asic Part Number and Shell Size anyard Style N - hain N - Nylon hord inish Options (See Table II) xample: IPT N (Stainless Steel hain) xample: IPT N (Nylon ord) T II: Shell inish Omit for Standard ad/olive rab inish 2 - right Nickel Plating (Ros) 6 - lack lectrodeposited Paint (Ros) 7 - lack Zn-o Plating (Ros) 8 - Olive rab Zn-o Plating ommital P/N T I: INSIONS Shell size IPT3181-8N IPT N IPT N IPT N IPT N IPT N IPT N IPT N IPT N ± lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

168 IPT ayonet ock onnector ccessories IT R and IT Y Protective Receptacle and Plug Plastic aps IT R PPITION NOTS Plastic caps for protection against dust and limited damage. I ccessory asic Part Number and Shell Size ommital P/N T I: RPT P INSIONS Shell size ±0.25 ±0.25 ±0.78 IT R Receptacle IT R Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT R Receptacle ommital P/N T II: PU P INSIONS Shell size ±0.25 ±0.25 ±0.78 IT Y Plug IT R Plug IT Y Plug IT R Plug IT Y Plug IT R Plug IT R Plug IT R Plug IT R Plug lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

169 IPT 3115 and IPT 3115 ummy Stowage Receptacles IPT ayonet ock onnector ccessories IPT 3115 I ccessory asic Part Number and Shell Size PPITION NOTS IPT3115 : ummy receptacle with rear base and seal. In conformity with I IPT3115 : ummy receptacle without rear base and seal. Shell size T I ±0.4 ± ± lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

170 IPT ayonet ock onnector ccessories and S Square lange Panel ount Receptacle Sealing askets S-14 asic Part Number S - onductive aterial Omit for Standard Shell Size 1 ± ±0.2 xample: (Neoprene) xample: S (onductive) ommital P/N Shell size T I ±0.5 ±1 ±0.7 ± lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

171 and Sealing Plug for Wire Sealing rommet IPT ayonet ock onnector ccessories asic Part Number ole Size ommital P/N ole size T I ±0.13 ±0.25 ±0.13 olor Red lue 2008 lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

172 IPT ayonet ock onnector ccessories IPT Series Tools onnector ssembly Tools NU RIPIN TOO ( # ) ( # ) PNUTI RIPIN TOO TURRT ( # ) ( # ) INSRTION TOO ROV TOO UI PIN lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

173 lenair IPT S and IPT Series Product Index IPT ayonet ock onnectors Series IPT S IPT S Overview and Technical ata...-1 ow To Order - Part Number reakdown...-4 V Part Number ross Reference...-5 aterials and inishes...-6 ontact imensions...-7 vailable Insert rrangements...-8 astener eight Requirements and Panel utout imensions IPT 00 S ront Panel ount Square lange Receptacle with eneral uty ackshell IPT 00 S...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT 02 S Rear ox ount Square lange Receptacle IPT 07 S Rear Panel ount am Nut Receptacle onnector with ackshell IPT 07 S...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT 06 S Straight Plug onnector with I/Shrinkboot ackshell IPT 06 S...SR Straight Plug onnector with ackshell, able lamp and ushing IPT 06 S Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT 06 S Straight Plug onnector with ackshell to ccomodate S3057 able lamp (not included) IPT 02 PP Rear ox ount Square lange Receptacle Thru ulkhead IPT 00 S ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT 07 S Rear Panel ount am Nut Receptacle onnector with I/Shinkboot ackshell IPT 07 S Rear Panel ount am Nut Receptacle with ackshell for I Shield Termination and Shrink oot IPT 06 S Straight Plug onnector with I/Shrinkboot ackshell IPT 01 S...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT 01 S In-ine Receptacle onnector with ackshell for I Shield Termination and Srhink oot lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

174 IPT ayonet ock onnectors lenair ommital IPT Series Product Index Series IPT Product ine Overview...-1 ow to Order - Part Number reakdown...-3 Styles and lasses...-4 ross Section...-6 Technical ata...-7 aterials and inishes...-8 ontact imensions...-9 Insert rrangement Tables lternate ey Positions astener eight Requirements and Panel utout imensions vailable Insert rrangements IPT 00 ront Panel ount Square lange Receptacle with ackshell IPT 00...P ront Panel ount Square lange Receptacle with ackshell for Use with P able lamp (clamp not included) IPT P ront Panel ount Square lange Receptacle with ackshell and P able land IPT 00...P ront Panel ount Square lange Receptacle with P ackshell and Sleeves to ccommodate Various able Sizes IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, ushing and able lamp IPT 00 ront Panel ount Square lange Receptacle with eneral uty ackshell IPT 00...SR ront Panel ount Square lange Receptacle with ackshell, able lamp and ushing IPT 00 ront Panel ount Square lange Receptacle with Shrink oot ackshell IPT 00 ront Panel ount Square lange Receptacle with ong ackshell and able lamp IPT 00 ront Panel ount Square lange Receptacle with ackshell for I Shield Termination and Shrink oot IPT 00 W ront Panel ount Square lange Receptacle with ong ackshell, etal Sleeve and land Seal IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT 01...P In-ine Receptacle onnector with ackshell for ttachment of P able land lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

175 lenair ommital IPT Series Product Index IPT ayonet ock onnectors IPT 01...P In-ine Receptacle onnector with ackshell and Plastic P able land IPT 01...P In-ine Receptacle onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT 01...SR In-ine Receptacle onnector with ackshell, able lamp and ushing IPT 01 In-ine Receptacle onnector with eneral uty ackshell IPT 01...SR In-ine Receptacle onnector with ackshell able lamp and ushing IPT 01 In-ine Receptacle onnector with Shrink oot ackshell IPT 01 In-ine Receptacle onnector with ackshell, able lamp and Sleeve IPT 01 W In-ine Receptacle onnector with ong ackshell, etal Sleeve and land Seal IPT 01 In-ine Receptacle onnector with ackshell for I Shield Termination and Shrink oot IPT 02 PP Rear ox ount Square lange Receptacle, Through ulkhead IPT 02 and IPT 02 Rear ox ount Square lange Receptacle IPT 02 Y Rear ox ount Square lange Receptacle with Printed ircuit oard Terminations IPT 06...N0 Straight Plug onnector with ccessory Threads IPT 06...N0 T Straight Plug onnector with ccessory Threads and rctic oupling Nut IPT 06 Straight Plug onnector with ackshell to ccommodate S3057 able lamp (clamp not included) IPT 06...P Straight Plug onnector with ackshell for Use with P lands (glands not included) IPT 06...P Straight Plug onnector with ackshell and P able land IPT 06...P Straight Plug onnector with P ackshell and Sleeves to ccommodate Various able Sizes IPT 06...P I67 Straight Plug onnector with ackshell for for I Shield Termination IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT 06 Straight Plug onnector with eneral uty ackshell IPT 06...SR Straight Plug onnector with ackshell, able lamp and ushing IPT 06 Straight Plug onnector with ackshell for eat Shrink oot lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

176 IPT ayonet ock onnectors lenair ommital IPT Series Product Index Series IPT ontinued IPT 06 Straight Plug onnector with ong ackshell, etal Sleeve, able Sealing land and able lamp IPT 06 Straight Plug onnector with ackshell Suitable for I Shield Termination and eat Shrink oot IPT 06 W Straight Plug onnector with ong ackshell and able Sealing land IPT 07 Rear ox ount am Nut Receptacle onnector IPT 07 Rear Panel ount am Nut Receptacle onnector with ackshell IPT 07...SR Rear Panel ount am Nut Receptacle onnector and ackshell with able lamp and ushing IPT 07 Y Rear ox ount am Nut Receptacle with Printed ircuit oard ontacts IPT 08 Plug onnector with 90 I Shield Termination ackshell Suitable for S3057 able lamp (clamp not included) IPT 08...P Plug onnector with 90 P ackshell and Sleeves to ccommodate Various able Sizes IPT 08 Plug onnector with 90 ackshell for I Shield Termination Suitable for S3057 able lamp (clamp not included) IPT 08 Plug onnector with 90 ackshell for Shield Termination and Shrink oot IPT 26 ox ount Rear lange Plug onnector Series IPT S and IPT onnector ccessories and Tools IPT ayonet ock Tools and ccessories Overview...-1 IT able lamp...-2 IT able lamp...-3 IT 3420 and IT Neoprene Sleeve...-4 IPT and IPT Protective Plug overs...-5 IPT and IPT Protective Receptacle overs...-6 IPT 3181-N and IPT 3181-N Protective Receptacle overs...-7 IT R and IT Y Protective Receptacle and Plug Plastic aps...-8 IPT 3115 and IPT 3115 ummy Stowage Receptacles and S Square lange Panel ount Receptacle Sealing askets and Sealing Plug for Wire Sealing rommet IPT Series Tools lenair, Inc. U.S. ode Printed in U.S.. NIR, IN IR WY N, X ail: sales@glenair.com

177 U n i t e d S t a t e s U n i t e d i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n a p a n Un i t e d S t a t e s Un i t e d i n g d o m e r m a n y r a n c e N o r d i c It a l y S p a i n a p a n U n i t e d S t a t e s U n i t e d i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n a p a n U n i t e d S t a t e s U n i t e d i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n U n i t e d S t a t e s U n i t e d i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n a p a n The world's broadest selection of interconnect products in stock and ready for immediate same-day shipment lenair's World of Interconnect Solutions complete overview of lenair's innovative range of interconnect products and services, including ilitary Standard and commercial e q u i v a l e n t c o n n e c t o r s a n d accessories. vailable now: lenair's Interconnect Product uide, featuring our entire library of lenair catalogs and data sheets. In addition to over a dozen product line catalogs, the includes a powerful part number development program that takes all the pain and confusion out of ordering interconnect components. n easy-to-use inventory search program provides ready access to 60,000 I- ST and commercial part numbers. icro- Twistpin onnectors and ccessories lenair offers both ilitary Standard icro- connectors as well as OTS selections, backshells, mounting hardware and more. Our TwistPin contact provides superior performance. TwistPin onnectors and ccessories icro- Nanominiature I Solutions Page -8 omposite Thermoplastic Interconnect Solutions lenair is the world's leading manufacturer of composite interconnect solutions. We are the go-to supplier for advanced composite technologies for commerical and military interconnect applications. I/P ilter onnectors iliary Standard onnector ccessories I-T type I/ P filter connectors, as well as other ilitary Standard and commercial electromagnetic shielding technologies. lso includes lenair Series 80 ighty ouse filter products. I/P ilter onnectors I-T-38999, I-T-83513, I and Other ilitary Standard onnector amilies. Plus lenair Series 80 "ighty ouse" esigns If the S connector accessory you need isn t in here it doesn t exist. Search this easy-to-use catalog by accessory type or il-spec slash number, then place your order against lenair s 60,000 part number same-day inventory. il-spec ackshells and onnector ccessories iber Optic Interconnect Solutions Series 80 ighty ouse onnectors and ables Tactical fiber optic connectors, cables, and termini for airframe, shipboard, and military ground vehicles. atalog features lenair s innovative high-density () connector system for reduced size and weight applications. iber Optic Interconnect Solutions Tactical iber Optic onnectors, ables and Termini lenair s revolutionary connector series that reduces interconnect system size and weight by 50% compared to standard I-T connectors. Now used on hundreds of mission-critical military and commercial applications. Series 80 ighty ouse onnectors and ables The Shielded nvironmental onnector with il-spec Performance and Ultraminiature Size Visit us at and use the literature order form for immediate catalog fulfillment

178 World of Interconnect Solutions lenair, Inc ir Way lendale, alifornia Telephone: ax: lenair Industrial Power and Signal onnector roup 25 Village ane Wallingford, T Telephone: acsimile: sales@glenair.com lenair U td 40 ower Oakham Way Oakham usiness Park P.O. ox 37, ansfield Notts, N18 5Y ngland Telephone: acsimile: sales@glenair.co.uk lenair icroway Systems 7000 North awndale venue incolnwood, Illinois Telephone: acsimile: lenair Nordic ustav III : S oulevard 46 S Solna Sweden Telephone: acsimile: sales@glenair.se lenair lectric mb Siemensstrasse Steinbach ermany Telephone: acsimile: germany@glenair.com lenair Iberica / a Vega, Velada Spain Telephone: acsimile: sales@glenair.es lenair Italia S.R.. Via Santi, Paderno ugnano ilano, Italy Telephone: acsimile: sales-italia@glenair.nl lenair rance SR 7, venue Parmentier Immeuble entral Parc # Toulouse rance Telephone: acsimile: sales@glenair.fr 2008 lenair, Inc. Printed in U.S..