PRODUCTIVITY KIT S OVER 400 DIFFERENT ECONOMICAL KITS TO BOOST YOUR PRODUCTIVITY!

Transcription

1 PRODUCTIVITY KIT S OVER 400 DIFFERENT ECONOMICAL KITS TO BOOST YOUR PRODUCTIVITY! EFFECTIVE MAY 2011

2 JETSTREAM TOOLING COOLANT STRAIGHT TO THE EDGE Jetstream Tooling delivers coolant to the optimum position close to the cutting edge. This jet of coolant lifts the chip away from the rake face, improving chip control and tool life enabling increased cutting data to be applied. Jetstream Tooling has been proven to work in nearly all material groups and with a wide choice of coolant pressures. The effective removal of heat from the cutting zone is one of the most important considerations affecting cutting tool performance. The benefits of using coolant to remove heat are clearly known, but until now, coolant has simply been applied by flooding the area. For coolant to be really effective, it needs to remove heat quickly from the cutting zone so a directed coolant flow, which puts coolant precisely where it is required, is much more efficient. Jetstream Tooling is extremely effective at removing heat from the cutting zone. The chip rapidly cools, hardens, and becomes brittle. The resultant chip is easily broken and removed from the cutting area. The high velocity coolant exiting the strategically placed nozzles on a Jetstream Tooling toolholder helps to shear the now brittle chip into small and easily managed pieces, eliminating any chip evacuation issues. The pressure field of the jet also helps to quickly evacuate the chips away from the cutting area without damaging expensive components and tooling. THE NEXT GENERATION DOUBLE OCTOMILL The next generation Double Octomill face milling cutter is an excellent choice for general applications in cast iron, steel and stainless steel in a wide range of industries. With 16 cutting edges it offers unmatched economy in terms of edge cost per insert. It is a highly versatile, economical and productive tool that can be used for both roughing and finishing. This, in turn, provides a lower component cost. The innovative Double Octomill inserts feature ground location grooves and are positioned in the pockets by 65 Rc HSS pins. This makes indexing easy and accurate resulting in improved surface finish. Whatever your industry or application, the easy-to-handle Double Octomill, with its 16 cutting edges and positive insert geometry, can make a unique contribution to milling performance.

3 TABLE OF CONTENTS Turning Jetstream Tooling Steel... 4 Stainless Steel Cast Iron High Feed... 7 Superalloys MDT (Multi-Directional Turning)... 9 Cut-off Threading Holemaking PerfoMax CrownLoc Milling Square QuattroMill Double OctoMill Nano Turbo Micro Turbo Super Turbo Power Turbo High Feed Round Insert K2 Ballnose Workpiece Materials STEEL STAINLESS STEEL CAST IRON ALUMINUM SUPERALLOYS HARDENED STEEL To place an order, call your local authorized distributor. For a list of authorized distributors in North America, visit

4 JETSTREAM TOOLING TM, TURNING - EXTERNAL Particularly effective on titanium and high temp alloys, Jetstream Tooling is a revolutionary way to improve chip control on almost all materials. Jetstream Tooling works by delivering a concentrated high pressure jet of coolant at high velocity straight to the optimum chip/tool interface. This jet of coolant forms a hydraulic wedge that lifts the chip away from the rake face of the insert. At the same time it effectively quenches the chip, breaks it, and pushes it out of the way. Kit includes one toolholder, ten inserts and wrenches We recommend a minimum pump pressure of 200 psi, but you ll see dramatic improvements in chip control, tool life, and the opportunity to use increased cutting speeds as the pressure is increased to 1000 psi. TS2000 A unique TiAlN coating, improved coating adhesion, and a new edge preparation technique combine to give you increased speed capability, improved surface finishes and better tool life consistency TH1000 A hard micro grain carbide, combined with a new TiSiAlN nano-laminate coating creates a tougher edge that can offer increased speed capability. This is an excellent choice in very secure and stable applications. Insert Style Chipgroove a p (inch) f (ipr) CNMG 4 MR CNMP 4 MF WNMP 4 MF Jetstream General Purpose Kits vc (sfpm) TS2000 IN718 TS2000 Titanium alloys TH1000 Titanium alloys EDP Kit Tool Insert (10 pcs.) Price /4" JET RH CNMP 432-MF1 PCLNR 12-4BJET CNMP 432-MF1 TS /4" JET LH CNMP 432-MF1 PCLNL 12-4BJET CNMP 432-MF1 TS /4" JET RH CNMP 432-MF1 TH1000 PCLNR 12-4BJET CNMP 432-MF1 TH /4" JET LH CNMP 432-MF1 TH1000 PCLNL 12-4BJET CNMP 432-MF1 TH " JET RH CNMP 432-MF1 PCLNR 16-4DJET CNMP 432-MF1 TS " JET LH CNMP 432-MF1 PCLNL 16-4DJET CNMP 432-MF1 TS " JET RH CNMP 432-MF1 TH1000 PCLNR 16-4DJET CNMP 432-MF1 TH " JET LH CNMP 432-MF1 TH1000 PCLNL 16-4DJET CNMP 432-MF1 TH /4" JET RH WNMP 432-MF1 PWLNR 12-4BJET WNMP 432-MF1 TS /4" JET LH WNMP 432-MF1 PWLNL 12-4BJET WNMP 432-MF1 TS /4" JET RH WNMP 432-MF1 TH1000 PWLNR 12-4BJET WNMP 432-MF1 TH /4" JET LH WNMP 432-MF1 TH1000 PWLNL 12-4BJET WNMP 432-MF1 TH " JET RH WNMP 432-MF1 PWLNR 16-4DJET WNMP 432-MF1 TS " JET LH WNMP 432-MF1 PWLNL 16-4DJET WNMP 432-MF1 TS " JET RH WNMP 432-MF1 TH1000 PWLNR 16-4DJET WNMP 432-MF1 TH " JET LH WNMP 432-MF1 TH1000 PWLNL 16-4DJET WNMP 432-MF1 TH /4" JET RH CNMG 432-MR3 PCLNR 12-4BJET CNMG 432-MR3 TS /4" JET LH CNMG 432-MR3 PCLNL 12-4BJET CNMG 432-MR3 TS " JET RH CNMG 432-MR3 PCLNR 16-4DJET CNMG 432-MR3 TS " JET LH CNMG 432-MR3 PCLNL 16-4DJET CNMG 432-MR3 TS The use of Jetstream Tooling typically requires the use of a hose kit to connect the holder to the tool block. A wide variety of hose kits are available from and your distributor. To place an order, call your local authorized distributor. 2

5 JETSTREAM TOOLINGTM, MDT The convenience of several operations in a single tool utilizing the Jetstream Tooling technology in an economical kit makes it even easier to use. Strategically aimed nozzles on the MDT Jetstream Tooling holders help to shear chips into small easily managed pieces, eliminating chip evacuation issues. The coolant is directed at cutting edge with pinpoint accuracy improving tool life significantly. Featured Grade CP500 the universal grade is an ideal first choice for many applications in all materials Kit includes one toolholder, ten inserts and a wrench Material Vc (SFPM) f (ipr) ap (doc) Steel Stainless Steel Cast Iron High Temp SAVE UP 60 Jetstream Standard Reach MDT Kits EDP Kit 1 RH MDT 3MM JET 1 RH MDT 4MM JET 1 RH MDT 5MM JET 1 RH MDT 6MM JET Tool CFIR100 03DJET CFIR100 04DJET CFIR100 05DJET CFIR100 06DJET Insert (10 pcs.) LCMF FT CP500 LCMF FT CP500 LCMF FT CP500 LCMF FT CP500 TO Price The use of Jetstream Tooling typically requires the use of a hose kit to connect the holder to the tool block. A wide variety of hose kits are available from and your distributor. To place an order, call your local authorized distributor. 3

6 STEEL TURNING Steel Turning Kits are available in three grades, including the first grade to feature the Duratomic coating process TP2500. Advanced geometries for general machining and profiling, and a choice of toolholder sizes, ensure you can find what you need. The D style holders draw inserts down and back into the pocket for more secure insert holding. TP1500 very productive grade for high speed machining of steels TP2500 the world s best general purpose grade for all types of ferrous materials TP3500 high edge toughness and reliability for more demanding operations Insert style Chipgroove ap (inch) f (ipr) DNMG-3 MF WNMG-3 MF WNMG-3 M DNMG-3 MF WNMG-4 MF CNMG-4 MF CNMG-4 M General Purpose Steel Kits vc (sfpm) TP3500 TP2500 TP1500 Kit includes one toolholder, ten inserts and a wrench AVAILABLE WITH TM DURATOMIC TECHNOLOGY! 140 Profiling Steel Kits 95 EDP Kit Tool Insert (10 pcs.) Price /4" D RH CNMG 4-MF5 TP2500 DCLNR 12-4B CNMG 432-MF5 TP /4" D LH CNMG 4-MF5 TP2500 DCLNL 12-4B CNMG 432-MF5 TP /4 D RH WNMG 3-MF2 TP1500 DWLNR 12-3B WNMG 332-MF2 TP /4 D LH WNMG 3-MF2 TP1500 DWLNL 12-3B WNMG 332-MF2 TP /4" D RH WNMG 4-MF5 TP2500 DWLNR 12-4B WNMG 432-MF5 TP /4" D LH WNMG 4-MF5 TP2500 DWLNL 12-4B WNMG 432-MF5 TP /4 D RH WNMG 3-M3 TP3500 DWLNR 12-3B WNMG 332-M3 TP /4 D LH WNMG 3-M3 TP3500 DWLNL 12-3B WNMG 332-M3 TP D RH CNMG 4-M5 TP1500 DCLNR 16-4D CNMG 432-M5 TP D LH CNMG 4-M5 TP1500 DCLNL 16-4D CNMG 432-M5 TP " D RH CNMG 4-MF5 TP2500 DCLNR 16-4D CNMG 432-MF5 TP " D LH CNMG 4-MF5 TP2500 DCLNL 16-4D CNMG 432-MF5 TP " D RH WNMG 4-MF5 TP2500 DWLNR 16-4D WNMG 432-MF5 TP " D LH WNMG 4-MF5 TP2500 DWLNL 16-4D WNMG 432-MF5 TP D RH CNMG 4-MF5 TP3500 DCLNR 16-4D CNMG 432-MF5 TP D LH CNMG 4 MF5 TP3500 DCLNL 16-4D CNMG 432-MF5 TP D RH WNMG 4-MF5 TP3500 DWLNR 16-4D WNMG 432-MF5 TP D LH WNMG 4-MF5 TP3500 DWLNL 16-4D WNMG 432-MF5 TP EDP Kit Tool Insert (10 pcs.) Price " D RH DNMG 3-MF2 TP1500 DDJNR 16-3D DNMG 332-MF2 TP " D LH DNMG 3-MF2 TP2500 DDJNL 16-3D DNMG 332-MF2 TP " D RH DNMG 3-MF5 TP2500 DDJNR 16-3D DNMG 332-MF5 TP To place an order, call your local authorized distributor. 4

7 STAINLESS STEEL TURNING Stainless Steel Turning Kits are available with a choice of two new Duratomic grades TM2000 for high cutting speeds and maximum productivity, and TM4000 for the extra toughness needed for reliability in interrupted cuts. The MF4 chipbreaker has a unique design for enhanced productivity and longer tool life in stainless turning, for unprecedented performance and excellent surface finish. The D style holders draw inserts down and back into the pocket for more secure insert holding. TM2000 heat and wear resistance for high productivity TM4000 very tough grade for interrupted cut machining Kit includes one toolholder, ten inserts and a wrench Insert style Chipgroove ap (inch) f (ipr) CNMG-4 MF WNMG-4 MF vc (sfpm) TM2000 TM4000 AVAILABLE WITH TM DURATOMIC TECHNOLOGY! General Purpose Stainless Steel Kits EDP Kit Tool Insert (10 pcs.) Price " D RH CNMG 4-MF4 TM2000 DCLNR 16-4D CNMG 432-MF4 TM " D LH CNMG 4-MF4 TM2000 DCLNL 16-4D CNMG 432-MF4 TM " D RH WNMG 4-MF4 TM2000 DWLNR 16-4D WNMG 432-MF4 TM " D LH WNMG 4-MF4 TM2000 DWLNL 16-4D WNMG 432-MF4 TM /4" D RH CNMG 4-MF4 TM2000 DCLNR 12-4B CNMG 432-MF4 TM /4" D LH CNMG 4-MF4 TM2000 DCLNL 12-4B CNMG 432-MF4 TM /4" D RH WNMG 4-MF4 TM2000 DWLNR 12-4B WNMG 432-MF4 TM /4" D LH WNMG 4-MF4 TM2000 DWLNL 12-4B WNMG 432-MF4 TM " D RH CNMG 4-MF4 TM4000 DCLNR 16-4D CNMG 432-MF4 TM " D LH CNMG 4-MF4 TM4000 DCLNL 16-4D CNMG 432-MF4 TM " D RH WNMG 4-MF4 TM4000 DWLNR 16-4D WNMG 432-MF4 TM " D LH WNMG 4-MF4 TM4000 DWLNL 16-4D WNMG 432-MF4 TM /4" D RH CNMG 4-MF4 TM4000 DCLNR 12-4B CNMG 432-MF4 TM /4" D LH CNMG 4-MF4 TM4000 DCLNL 12-4B CNMG 432-MF4 TM /4" D RH WNMG 4-MF4 TM4000 DWLNR 12-4B WNMG 432-MF4 TM /4" D LH WNMG 4-MF4 TM4000 DWLNL 12-4B WNMG 432-MF4 TM To place an order, call your local authorized distributor. 5

8 CAST IRON TURNING Duratomic takes on cast iron! Achieve excellent results with s NEW Duratomic cast iron turning grades. The NEW TK1001 is the ideal insert for achieving increased productivity in gray and ductile irons. TK1001 s supreme wear resistance, can handle the heat and has no problem with higher speed. TK2001 is the reliable insert grade for gray and ductile irons, where unstable conditions and interrupted cut are present. TK2001 is an ideal choice in many finishing applications due to the extra edge toughness. General Purpose Cast Iron Kits AVAILABLE WITH TM DURATOMIC TECHNOLOGY! v c (sfpm) Insert Style Chipgroove a p f (in/rev) CNMA " -.200".008" -.025" TK1001 CNMG-4 M4.010" -.200".005" -.028" CNMG-4 M5.030" -.200".010" -.028" CNMG-4 MR7.050" -.200".010" -.032" CNMA " -.275".008" -.030" TK2001 CNMG-5 MR7.050" -.275".010" -.032" DNMA " -.150".008" -.025" WNMG-4 M5.030" -.200".010" -.028" WNMG-4 MR7.050" -.200".010" -.032" C D Kit includes one toolholder, ten inserts and a wrench TK1001 Hard and wear resistant. Ideal in gray iron at high speeds for increased productivity TK2001 Tough and reliable in demanding operations. Excellent in both gray and ductile irons where instability is present. EDP Kit Description Tool Insert (10 pcs.) Price " LH CNMA-4 TK1001 DCLNL-16-4D CNMA 432 TK " RH CNMA-4 TK1001 DCLNR-16-4D CNMA 432 TK " LH CNMA-4 TK2001 DCLNL-16-4D CNMA 432 TK " RH CNMA-4 TK2001 DCLNR-16-4D CNMA 432 TK " LH CNMA-4 TK1001 DCLNL-16-4D CNMA 433 TK " RH CNMA-4 TK1001 DCLNR-16-4D CNMA 433 TK " LH CNMA-4 TK2001 DCLNL-16-4D CNMA 433 TK " RH CNMA-4 TK2001 DCLNR-16-4D CNMA 433 TK /4" LH CNMA-5 TK1001 DCLNL-20-5D CNMA 543 TK /4" RH CNMA-5 TK1001 DCLNR-20-5D CNMA 543 TK /4" LH CNMA-5 TK2001 DCLNL-20-5D CNMA 543 TK /4" RH CNMA-5 TK2001 DCLNR-20-5D CNMA 543 TK " LH CNMG-4 M4 TK1001 DCLNL-16-4D CNMG 432-M4 TK " RH CNMG-4 M4 TK1001 DCLNR-16-4D CNMG 432-M4 TK " LH CNMG-4 M4 TK2001 DCLNL-16-4D CNMG 432-M4 TK " RH CNMG-4 M4 TK2001 DCLNR-16-4D CNMG 432-M4 TK " LH CNMG-4 M5 TK1001 DCLNL-16-4D CNMG 432-M5 TK " RH CNMG-4 M5 TK1001 DCLNR-16-4D CNMG 432-M5 TK " LH CNMG-4 M5 TK2001 DCLNL-16-4D CNMG 432-M5 TK " RH CNMG-4 M5 TK2001 DCLNR-16-4D CNMG 432-M5 TK " LH CNMG-4 MR7 TK1001 DCLNL-16-4D CNMG 433-MR7 TK " RH CNMG-4 MR7 TK1001 DCLNR-16-4D CNMG 433-MR7 TK " LH CNMG-4 MR7 TK2001 DCLNL-16-4D CNMG 433-MR7 TK " RH CNMG-4 MR7 TK2001 DCLNR-16-4D CNMG 433-MR7 TK /4" LH CNMG-5 MR7 TK1001 DCLNL-20-5D CNMG 543-MR7 TK /4" RH CNMG-5 MR7 TK1001 DCLNR-20-5D CNMG 543-MR7 TK /4" LH CNMG-5 MR7 TK2001 DCLNL-20-5D CNMG 543-MR7 TK /4" RH CNMG-5 MR7 TK2001 DCLNR-20-5D CNMG 543-MR7 TK " LH DNMA-4 TK1001 DDJNL-16-4D DNMA 432 TK " RH DNMA-4 TK1001 DDJNR-16-4D DNMA 432 TK " LH DNMA-4 TK2001 DDJNL-16-4D DNMA 432 TK " RH DNMA-4 TK2001 DDJNR-16-4D DNMA 432 TK W " LH WNMG-4 M5 TK1001 DWLNL-16-4D WNMG 432-M5 TK " RH WNMG-4 M5 TK1001 DWLNR-16-4D WNMG 432-M5 TK " LH WNMG-4 M5 TK2001 DWLNL-16-4D WNMG 432-M5 TK " RH WNMG-4 M5 TK2001 DWLNR-16-4D WNMG 432-M5 TK " LH WNMG-4 MR7 TK1001 DWLNL-16-4D WNMG 432-MR7 TK " RH WNMG-4 MR7 TK1001 DWLNR-16-4D WNMG 432-MR7 TK " LH WNMG-4 MR7 TK2001 DWLNL-16-4D WNMG 432-MR7 TK " RH WNMG-4 MR7 TK2001 DWLNR-16-4D WNMG 432-MR7 TK To place an order, call your local authorized distributor. 6

9 HIGH FEED TURNING KITS Boost your productivity while achieving excellent surface finish! Kits are offered in either two NEW cermet grades or our Duratomic carbide to give you that extra wear resistance needed in finishing applications. You can double your feed rate and produce a standard finish or use your existing feed rate and achieve close to as-ground finishes. The D style holders draw inserts down and back into the pocket for more secure insert holding. TP1020 uncoated cermet when excellent surface finish is required TP1030 PVD coated cermet when achieving demanding tolerances is required TP1500 very productive grade for high speed machining of steels TP2500 the world s best general purpose grade for all types of ferrous materials Kit includes one toolholder, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Insert style Chipgroove ap (inch) f (ipr) CNMG-4 MF CNMG-4 MF WNMG-3 MF WNMG-4 MF vc (sfpm) TP1020 TP1030 & TP1500 TP2500 General Purpose Steel High Feed Kits EDP Kit Tool Insert (10 pcs.) Price /4" D RH CNMG 4W-MF5 TP1500 DCLNR 12-4B CNMG 432W-MF5 TP /4" D LH CNMG 4W-MF5 TP1500 DCLNL 12-4B CNMG 432W-MF5 TP /4" D RH CNMG 4W-MF5 TP2500 DCLNR 12-4B CNMG 432W-MF5 TP /4" D LH CNMG 4W-MF5 TP2500 DCLNL 12-4B CNMG 432W-MF5 TP /4" D RH WNMG 4W-MF5 TP1500 DWLNR 12-4B WNMG 432W-MF5 TP /4" D LH WNMG 4W-MF5 TP1500 DWLNL 12-4B WNMG 432W-MF5 TP /4" D RH CNMG 4W-MF2 TP1020 DCLNR 12-4B CNMG 432W-MF2 TP /4" D LH CNMG 4W-MF2 TP1020 DCLNL 12-4B CNMG 432W-MF2 TP /4" D RH WNMG 3W-MF2 TP1030 DWLNR-12-3B WNMG 332W-MF2 TP /4" D LH WNMG 3W-MF2 TP1030 DWLNL-12-3B WNMG 332W-MF2 TP " D RH CNMG 4W-MF5 TP1500 DCLNR 16-4D CNMG 432W-MF5 TP " D LH CNMG 4W-MF5 TP1500 DCLNL 16-4D CNMG 432W-MF5 TP " D RH CNMG 4W-MF5 TP2500 DCLNR 16-4D CNMG 432W-MF5 TP " D LH CNMG 4W-MF5 TP2500 DCLNL 16-4D CNMG 432W-MF5 TP " D RH CNMG 4W-MF2 TP1020 DCLNR 16-4D CNMG 432W-MF2 TP " D LH CNMG 4W-MF2 TP1020 DCLNL 16-4D CNMG 432W-MF2 TP " D RH WNMG 4W-MF5 TP1500 DWLNR 16-4D WNMG 432W-MF5 TP " D LH WNMG 4W-MF5 TP1500 DWLNL 16-4D WNMG 432W-MF5 TP " D RH WNMG 4W-MF5 TP2500 DWLNR 16-4D WNMG 432W-MF5 TP " D LH WNMG 4W-MF5 TP2500 DWLNL 16-4D WNMG 432W-MF5 TP To place an order, call your local authorized distributor. 7

10 HIGH-TEMP ALLOY TURNING Kits feature a choice of left or right hand holders and three styles of TS2000 inserts for side turning and profiling of a range of high temperature alloys. The D style holders draw inserts down and back into the pocket for more secure insert holding. Featured Grade TS2000 higher speed machining with increased wear and notching resistance Insert a p f v c (sfpm) Style Chipgroove (inch) (ipr) CNMP 4 MF DNMP 4 MF WNMP 4 MF TS2000 Kit includes one toolholder, ten inserts and a wrench High Temperature Alloy Kits EDP Kit Tool Insert (10 pcs.) Price " RH CNMP-4 MF1 TS2000 DCLNR-16-4D CNMP 432-MF1 TS " LH CNMP-4 MF1 TS2000 DCLNL-16-4D CNMP 432-MF1 TS " RH WNMP-4 MF1 TS2000 DWLNR-16-4D WNMP 432-MF1 TS " LH WNMP-4 MF1 TS2000 DWLNL-16-4D WNMP 432-MF1 TS High Temperature Alloy Kits EDP Kit Tool Insert (10 pcs.) Price " RH DNMP-4 MF1 TS2000 DDJNR-16-4D DNMP 432-MF1 TS " LH DNMP-4 MF1 TS2000 DDJNL-16-4D DNMP 432-MF1 TS To place an order, call your local authorized distributor. 8

11 MDT The convenience of several operations in a single tool, and an economical kit makes it even easier to use. Left and right hand holders are available for a variety of multi-directional turning operations. A second kit is offered for deep grooving and cut-off. Featured Grade CP500 the universal grade is an ideal first choice for many applications in all materials Material Steel Stainless Steel Cast Iron V c (SFPM) f (ipr) a p (doc) Kit includes one toolholder, ten inserts and a wrench Standard and Long Reach (LG) Toolholders 150 EDP Kit Tool Insert (10 pcs.) Price " RH MDT 3MM CFIR D LCMF 3MM FT, CP " RH MDT 4MM CFIR D LCMF 4MM FT, CP " RH MDT 5MM CFIR D LCMF 5MM FT, CP " RH MDT 6MM CFIR D LCMF 6MM FT, CP " RH MDT LG 3MM CFMR D LCMR 3MM FT, CP " RH MDT LG 4MM CFMR D LCMR 4MM FT, CP " RH MDT LG 5MM CFMR D LCMR 5MM FT, CP " RH MDT LG 6MM CFMR D LCMR 6MM FT, CP To place an order, call your local authorized distributor. 9

12 CUT-OFF Everything you need for high performance deep grooving and cut-off in workpiece diameters up to 5.5 inches is in s Cut-Off Tooling Kit. Each kit contains one high speed steel cut-off blade that fits in a block type* toolholder, ten high-productivity inserts with the efficient -16 chipbreaker, and, as an added bonus, an improved wrench to make insert installation and removal fast and easy. Inserts are available in our new Duratomic TGP45 grade or CP600 grade for cut-off operations in high temperature alloys and optimizing in steel and stainless steels., TGP45 Material Cut-Off Kits, TGP45 Steel Stainless Steel Cast Iron V c (SFPM) f (ipr) AVAILABLE WITH TM DURATOMIC TECHNOLOGY! Kit includes one toolholder, ten inserts and a wrench *Block type toolholder ordered separately Blade fits in all competitors blocks SAVE OVER 100 EDP Kit Tool Insert (10 pcs.) Price MM A TGP45 1" A N-16-TGP MM A TGP45 1-1/4" A N-16-TGP MM A TGP45 1" A N-16-TGP MM A TGP45 1-1/4" A N-16-TGP NOTE: Wrench included with kits., CP600 Material Steel Stainless Steel High Temp V c (SFPM) f (ipr) Cut-Off Kits, CP600 SAVE OVER 100 EDP Kit Tool Insert (10 pcs.) Price MM A CP600 1" A N-16-CP MM A CP /4" A N-16-CP MM A CP600 1" A N-16-CP MM A CP /4" A N-16-CP NOTE: Wrench included with kits. To place an order, call your local authorized distributor. 10

13 THREADING GENERAL PURPOSE Featured Insert s -A insert is the first choice geometry for all materials. Together with the universal grade CP500, it s the go-to combination for generalpurpose threading. Thread Turning Wizard Software available on website Eliminates complicated programming Selects the optimum holder and inserts Identifies the best operating parameters CP500 Stainless Cast Material Steel Steel Iron v c (sfpm) /4" External Threading Kits Our Snap-Tap threading kits feature the HD holder for maximum rigidity between insert and holder and a choice of insert geometry depending on your application. 70 EDP Kit Tool Insert (2 pcs.) Price /4" ExtAPartial-A CER QHD 16ERA60-A CP /4" ExtAGPartial-A CER QHD 16ERAG60-A CP /4" ExtGPartial-A CER QHD 16ERG60-A CP /4" Ext 1.0ISO-A CER QHD 16ER1.0ISO-A CP /4" Ext 1.25ISO-A CER QHD 16ER1.25ISO-A CP /4" Ext 1.5ISO-A CER QHD 16ER1.5ISO-A CP /4" Ext 1.75ISO-A CER QHD 16ER1.75ISO-A CP /4" Ext 2.0ISO-A CER QHD 16ER2.0ISO-A CP /4" Ext 2.5ISO-A CER QHD 16ER2.5ISO-A CP /4" Ext 3.0ISO-A CER QHD 16ER3.0ISO-A CP /4" Ext 20UN-A CER QHD 16ER20UN-A CP /4" Ext 18UN-A CER QHD 16ER18UN-A CP /4" Ext 16UN-A CER QHD 16ER16UN-A CP /4" Ext 14UN-A CER QHD 16ER14UN-A CP /4" Ext 12UN-A CER QHD 16ER12UN-A CP /4" Ext 8UN-A CER QHD 16ER8UN-A CP " External Threading Kits EDP Kit Tool Insert (2 pcs.) Price " ExtAPartial-A CER QHD 16ERA60-A CP " ExtAGPartial-A CER QHD 16ERAG60-A CP " ExtGPartial-A CER QHD 16ERG60-A CP " Ext 1.0ISO-A CER QHD 16ER1.0ISO-A CP " Ext 1.25ISO-A CER QHD 16ER1.25ISO-A CP " Ext 1.5ISO-A CER QHD 16ER1.5ISO-A CP " Ext 1.75ISO-A CER QHD 16ER1.75ISO-A CP " Ext 2.0ISO-A CER QHD 16ER2.0ISO-A CP " Ext 2.5ISO-A CER QHD 16ER2.5ISO-A CP " Ext 3.0ISO-A CER QHD 16ER3.0ISO-A CP " Ext 20UN-A CER QHD 16ER20UN-A CP " Ext 18UN-A CER QHD 16ER18UN-A CP " Ext 16UN-A CER QHD 16ER16UN-A CP " Ext 14UN-A CER QHD 16ER14UN-A CP " Ext 12UN-A CER QHD 16ER12UN-A CP " Ext 8UN-A CER QHD 16ER8UN-A CP To place an order, call your local authorized distributor. 11

14 THREADING OPTIMIZING FOR STEEL Featured Insert s -A1 insert is the optimizing geometry for steel threading. Thread Turning Wizard Software available on website Eliminates complicated programming Selects the optimum holder and inserts Identifies the best operating parameters CP500 Stainless Cast Material Steel Steel Iron v c (sfpm) /4" External Threading Kits Our Snap-Tap threading kits feature the HD holder for maximum rigidity between insert and holder and a choice of insert geometry depending on your application. 70 1" External Threading Kits EDP Kit Tool Insert (2 pcs.) Price /4" ExtAPartial-A1 CER QHD 16ERA60-A1 CP /4" ExtAGPartial-A1 CER QHD 16ERAG60-A1 CP /4" ExtGPartial-A1 CER QHD 16ERG60-A1 CP /4" Ext 1.0ISO-A1 CER QHD 16ER1.0ISO-A1 CP /4" Ext 1.25ISO-A1 CER QHD 16ER1.25ISO-A1 CP /4" Ext 1.5ISO-A1 CER QHD 16ER1.5ISO-A1 CP /4" Ext 1.75ISO-A1 CER QHD 16ER1.75ISO-A1 CP /4" Ext 2.0ISO-A1 CER QHD 16ER2.0ISO-A1 CP /4" Ext 2.5ISO-A1 CER QHD 16ER2.5ISO-A1 CP /4" Ext 3.0ISO-A1 CER QHD 16ER3.0ISO-A1 CP /4" Ext 20UN-A1 CER QHD 16ER20UN-A1 CP /4" Ext 18UN-A1 CER QHD 16ER18UN-A1 CP /4" Ext 16UN-A1 CER QHD 16ER16UN-A1 CP /4" Ext 14UN-A1 CER QHD 16ER14UN-A1 CP /4" Ext 12UN-A1 CER QHD 16ER12UN-A1 CP /4" Ext 8UN-A1 CER QHD 16ER8UN-A1 CP /4" Ext 11.5NPT-A1 CER QHD 16ER11.5NPT-A1 CP EDP Kit Tool Insert (2 pcs.) Price " ExtAPartial-A1 CER QHD 16ERA60-A1 CP " ExtAGPartial-A1 CER QHD 16ERAG60-A1 CP " ExtGPartial-A1 CER QHD 16ERG60-A1 CP " Ext 1.0ISO-A1 CER QHD 16ER1.0ISO-A1 CP " Ext 1.25ISO-A1 CER QHD 16ER1.25ISO-A1 CP " Ext 1.5ISO-A1 CER QHD 16ER1.5ISO-A1 CP " Ext 1.75ISO-A1 CER QHD 16ER1.75ISO-A1 CP " Ext 2.0ISO-A1 CER QHD 16ER2.0ISO-A1 CP " Ext 2.5ISO-A1 CER QHD 16ER2.5ISO-A1 CP " Ext 3.0ISO-A1 CER QHD 16ER3.0ISO-A1 CP " Ext 20UN-A1 CER QHD 16ER20UN-A1 CP " Ext 18UN-A1 CER QHD 16ER18UN-A1 CP " Ext 16UN-A1 CER QHD 16ER16UN-A1 CP " Ext 14UN-A1 CER QHD 16ER14UN-A1 CP " Ext 12UN-A1 CER QHD 16ER12UN-A1 CP " Ext 8UN-A1 CER QHD 16ER8UN-A1 CP " Ext 11.5NPT-A1 CER QHD 16ER11.5NPT-A1 CP To place an order, call your local authorized distributor. 12

15 THREADING OPTIMIZING FOR STAINLESS STEEL Featured Insert s -A2 insert is the optimizing geometry for stainless steel threading. 3/4" External Threading Kits CP500 Stainless Cast Material Steel Steel Iron v c (sfpm) Our Snap-Tap threading kits feature the HD holder for maximum rigidity between insert and holder and a choice of insert geometry depending on your application. Internal kits are also available. Thread Turning Wizard Software available on website Eliminates complicated programming Selects the optimum holder and inserts Identifies the best operating parameters 70 1" External Threading Kits EDP Kit Tool Insert (2 pcs.) Price /4" ExtAPartial-A2 CER QHD 16ERA60-A2 CP /4" ExtAGPartial-A2 CER QHD 16ERAG60-A2 CP /4" ExtGPartial-A2 CER QHD 16ERG60-A2 CP /4" Ext 1.0ISO-A2 CER QHD 16ER1.0ISO-A2 CP /4" Ext 1.25ISO-A2 CER QHD 16ER1.25ISO-A2 CP /4" Ext 1.5ISO-A2 CER QHD 16ER1.5ISO-A2 CP /4" Ext 1.75ISO-A2 CER QHD 16ER1.75ISO-A2 CP /4" Ext 2.0ISO-A2 CER QHD 16ER2.0ISO-A2 CP /4" Ext 2.5ISO-A2 CER QHD 16ER2.5ISO-A2 CP /4" Ext 3.0ISO-A2 CER QHD 16ER3.0ISO-A2 CP /4" Ext 20UN-A2 CER QHD 16ER20UN-A2 CP /4" Ext 18UN-A2 CER QHD 16ER18UN-A2 CP /4" Ext 16UN-A2 CER QHD 16ER16UN-A2 CP /4" Ext 14UN-A2 CER QHD 16ER14UN-A2 CP /4" Ext 12UN-A2 CER QHD 16ER12UN-A2 CP /4" Ext 8UN-A2 CER QHD 16ER8UN-A2 CP /4" Ext 11.5NPT-A2 CER QHD 16ER11.5NPT-A2 CP Internal Threading Kits EDP Kit Tool Insert (2 pcs.) Price " ExtAPartial-A2 CER QHD 16ERA60-A2 CP " ExtAGPartial-A2 CER QHD 16ERAG60-A2 CP " ExtGPartial-A2 CER QHD 16ERG60-A2 CP " Ext 1.0ISO-A2 CER QHD 16ER1.0ISO-A2 CP " Ext 1.25ISO-A2 CER QHD 16ER1.25ISO-A2 CP " Ext 1.5ISO-A2 CER QHD 16ER1.5ISO-A2 CP " Ext 1.75ISO-A2 CER QHD 16ER1.75ISO-A2 CP " Ext 2.0ISO-A2 CER QHD 16ER2.0ISO-A2 CP " Ext 2.5ISO-A2 CER QHD 16ER2.5ISO-A2 CP " Ext 3.0ISO-A2 CER QHD 16ER3.0ISO-A2 CP " Ext 20UN-A2 CER QHD 16ER20UN-A2 CP " Ext 18UN-A2 CER QHD 16ER18UN-A2 CP " Ext 16UN-A2 CER QHD 16ER16UN-A2 CP " Ext 14UN-A2 CER QHD 16ER14UN-A2 CP " Ext 12UN-A2 CER QHD 16ER12UN-A2 CP " Ext 8UN-A2 CER QHD 16ER8UN-A2 CP " Ext 11.5NPT-A2 CER QHD 16ER11.5NPT-A2 CP EDP Kit Tool Insert (2 pcs.) Price /4" RH SNAPTAP KIT ID CNR AHD 16NR AG60 A2 CP " RH SNAPTAP KIT ID CNR AHD 16NR AG60 A2 CP /4" RH MINI SNAPTAP KIT ID SNR A 09NR A60 A2 CP To place an order, call your local authorized distributor. 13

16 DRILLING PERFOMAX TM The unique PerfoMax indexable drill offers stability and high productivity in kits ranging from.75" to 2.00" drill diameters in 3XD and 4XD applications. Each kit includes 10 center and 10 peripheral inserts along with the specified drill body. Ordering example: PERFOKIT 0750D 3X (D = Duratomic technology) For more precise cutting data, see Holemaking PerfoMax Productivity Kits 3xD, 4xD 497 DP2000 Duratomic coating technology and superior edge toughness makes this the first choice for high speed applications in steel and cast iron. T400D tough, reliable center insert grade where cutting speeds can be near zero T3000D Tough grade for maximum application security. First choice in stainless steel and in demanding operations. EDP Kit Description Drill Drill dia. Shank dia. Insert (10 pcs.) Price PERFOKIT 0750D 3X SD R7-C-SC SPGX 0602-C1, T400D 360 SCGX P2, DP2000D PERFOKIT X SD R7-C-SC SPGX 0602-C1, T400D 360 SCGX P2, T3000D PERFOKIT 0812D 3X SD R7-C SPGX 0602-C1 T400D 370 SCGX P2 DP PERFOKIT X SD R7-C SPGX 0602-C1 T400D 370 SCGX P2 T3000D PERFOKIT 0875D 3X SD R7-C SPGX 0703-C1 T400D 380 SCGX P2 DP PERFOKIT X SD R7-C SPGX 0703-C1 T400D 380 SCGX P2 T3000D PERFOKIT 0937D 3X SD R7-C SPGX 0703-C1 T400D 390 SCGX P2 DP PERFOKIT X SD R7-C SPGX 0703-C1 T400D 390 SCGX P2 T3000D PERFOKIT 1000D 3X SD R7-C SPGX 0703-C1, T400D 390 SCGX P2, DP2000D PERFOKIT X SD R7-C SPGX 0703-C1, T400D 390 SCGX P2, T3000D PERFOKIT 1125D 3X SD R7-C SPGX 0903-C1, T400D 430 SCGX 09T308-P2 DP PERFOKIT X SD R7-C SPGX 0903-C1, T400D 430 SCGX 09T308-P2 T3000D PERFOKIT 1250D 3X SD R7-C-SP SPGX 11T3-C1, T400D 430 SCGX 09T308-P2, DP PERFOKIT X SD R7-C-SP SPGX 11T3-C1, T400D 430 SCGX 09T308-P2, T3000D PERFOKIT 1375D 3X SD R7-C SPGX 11T3-C1, T400D 460 SCGX P2, DP PERFOKIT X SD R7-C SPGX 11T3-C1, T400D 460 SCGX P2, T3000D PERFOKIT 1500D 3X SD R7-C-SP SPGX 12T3-C1, T400D 470 SCGX P2, DP PERFOKIT X SD R7-C-SP SPGX 12T3-C1, T400D 470 SCGX P2, T3000D PERFOKIT 1750D 3X SD R7-C SPGX 1504-C1, T400D 500 SCGX P2, DP PERFOKIT X SD R7-C SPGX 1504-C1, T400D 500 SCGX P2, T3000D PERFOKIT 2000D 3X SD R7-C SPGX 1504-C1, T400D 520 SCGX P2, DP PERFOKIT X SD R7-C SPGX 1504-C1, T400D 520 SCGX P2, T3000D To place an order, call your local authorized distributor. 14

17 DRILLING PERFOMAX TM Steel - DP2000 Stainless - T3000D Cast Iron - DP2000 Drill diameter Drill diameter Drill diameter Material Material Material Group Feed rate (in/rev) Group Feed rate (in/rev) Group Feed rate (in/rev) No No No Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) EDP Kit Description Drill To place an order, call your local authorized distributor. Drill dia. Shank dia. Insert (10 pcs.) Price PERFOKIT X SD R7-C-SC SPGX 0602-C1, T400D 400 SCGX P2, T3000D PERFOKIT X SD R7-C SPGX 0602-C1 T400D 410 SCGX P2 T3000D PERFOKIT X SD R7-C SPGX 0703-C1 T400D 420 SCGX P2 T3000D PERFOKIT X SD R7-C SPGX 0703-C1 T400D 430 SCGX P2 T3000D PERFOKIT X SD R7-C SPGX 0703-C1, T400D 430 SCGX P2, T3000D PERFOKIT X SD R7-C SPGX 0903-C1, T400D 460 SCGX 09T308-P2 T3000D PERFOKIT X SD R7-C-SP SPGX 11T3-C1, T400D 460 SCGX 09T308-P2, T3000D PERFOKIT X SD R7-C SPGX 11T3-C1, T400D 490 SCGX P2, T3000D PERFOKIT X SD R7-C-SP SPGX 12T3-C1, T400D 520 SCGX P2, T3000D PERFOKIT X SD R7-C SPGX 1504-C1, T400D 535 SCGX P2, T3000D PERFOKIT X SD R7-C SPGX 1504-C1, T400D 545 SCGX P2, T3000D PERFOKIT 0750D 4X SD R7-C-SC SPGX 0602-C1, T400D 400 SCGX P2, DP2000D PERFOKIT 0812D 4X SD R7-C SPGX 0602-C1 T400D 410 SCGX P2 DP PERFOKIT 0875D 4X SD R7-C SPGX 0703-C1 T400D 420 SCGX P2 DP PERFOKIT 0937D 4X SD R7-C SPGX 0703-C1 T400D 430 SCGX P2 DP PERFOKIT 1000D 4X SD R7-C SPGX 0703-C1, T400D 430 SCGX P2, DP PERFOKIT 1125D 4X SD R7-C SPGX 0903-C1, T400D 460 SCGX 09T308-P2 DP PERFOKIT 1250D 4X SD R7-C-SP SPGX 11T3-C1, T400D 460 SCGX 09T308-P2, DP PERFOKIT 1375D 4X SD R7-C SPGX 11T3-C1, T400D 490 SCGX P2, DP PERFOKIT 1500D 4X SD R7-C-SP SPGX 12T3-C1, T400D 520 SCGX P2, DP PERFOKIT 1750D 4X SD R7-C SPGX 1504-C1, T400D 535 SCGX P2, DP PERFOKIT 2000D 4X SD R7-C SPGX 1504-C1, T400D 545 SCGX P2, DP

18 DRILLING CROWNLOC CrownLoc drills are the economical, convenient way to achieve the holemaking tolerance of a brazed drill, but with superior metal removal rates. These drills don t need regrinding, so they re more cost-effective. They reduce inventory because one drill body can make holes of several different diameters just by changing the crown, which is fast, easy, and so accurate that no resetting is required. Kit includes one drill body, two crowns and a dynamomentic key for precise clamping of the crown Application data Steel Stainless Cast Iron Drill diameter Drill diameter Drill diameter 9/16-5/8 11/ /16-5/8 11/ /16-5/8 11/ Material Material Material Feed rate (in/rev) Feed rate (in/rev) Feed rate (in/rev) Group No. Group No. Group No Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) CrownLoc Tap Drill Kits EDP Kit Description Drill CrownLoc Nominal Kits 165 Drill dia. Shank dia. Crowns (2 pcs.) Price CROWNKITP 5/8-11TAP SD / R SD P CROWNKITP 5/8-18TAP SD / R SD P CROWNKITP 3/4-10TAP SD / R SD P CROWNKITP 3/4-16TAP SD / R SD P CROWNKITP 7/8-9TAP SD / R SD P CROWNKITP 7/8-14TAP SD / R SD P CROWNKITP 1-8TAP SD / R SD P CROWNKITP 1-12TAP SD / R SD P 450 EDP Kit Description Drill Drill dia. Shank dia. Crowns (2 pcs.) Price CROWNKITP 9/16 3X SD / R SD P CROWNKITP 5/8 3X SD / R SD P CROWNKITP 11/16 3X SD / R SD P CROWN KITP 3/4 3X SD / R SD P CROWN KITP 13/16 3X SD / R SD P CROWN KITP 7/8 3X SD / R SD P CROWN KITP 15/16 3X SD / R SD P CROWN KITP 1 3X SD / R SD P 460 To place an order, call your local authorized distributor. 16

19 SQUARE SHOULDER SQUARE 6 TM With six cutting edges, Square 6 is an effective tool for square shoulder milling, facemilling and plunging. True 90 walls can be achieved the first pass, in one milling operation, and results in a high quality surface finish. MP2500 First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Square 6-08 Square 6-04 AVAILABLE WITH TM DURATOMIC TECHNOLOGY! Kit includes one cutter body, ten inserts and a wrench Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Material Material Material Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Square 6 R220/ Kits Max D.O.C Kit Contents For spare parts see Navigator. 285 P M K EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price SQUARE 6 1.5P KIT R A XNEX TR-M13 MP SQUARE 6 2.0P KIT R A XNEX TR-M13 MP SQUARE 6 2.5P KIT R A XNEX TR-M13 MP SQUARE 6 3.0P KIT R A XNEX TR-M13 MP SQUARE 6 4.0P KIT R A XNEX TR-M13 MP SQUARE 6 1.5M KIT R A XNEX TR-ME09 F40M SQUARE 6 2.0M KIT R A XNEX TR-ME09 F40M SQUARE 6 2.5M KIT R A XNEX TR-ME09 F40M SQUARE 6 3.0M KIT R A XNEX TR-ME09 F40M SQUARE 6 4.0M KIT R A XNEX TR-ME09 F40M SQUARE 6 1.5K KIT R A XNEX TR-M13 MK SQUARE 6 2.0K KIT R A XNEX TR-M13 MK SQUARE 6 2.5K KIT R A XNEX TR-M13 MK SQUARE 6 3.0K KIT R A XNEX TR-M13 MK SQUARE 6 4.0K KIT R A XNEX TR-M13 MK Square 6 R220/ Kits Max D.O.C Kit Contents For spare parts see Navigator. 240 P M K EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price SQUARE P KIT R A XNEX TR-M08 MP SQUARE P KIT R A XNEX TR-M08 MP SQUARE P KIT R A XNEX TR-M08 MP SQUARE P KIT R A XNEX TR-M08 MP SQUARE P KIT R A XNEX TR-M08 MP SQUARE M KIT R A XNEX TR-M08 F40M SQUARE M KIT R A XNEX TR-M08 F40M SQUARE M KIT R A XNEX TR-M08 F40M SQUARE M KIT R A XNEX TR-M08 F40M SQUARE M KIT R A XNEX TR-M08 F40M SQUARE K KIT R A XNEX TR-M08 MK SQUARE K KIT R A XNEX TR-M08 MK SQUARE K KIT R A XNEX TR-M08 MK SQUARE K KIT R A XNEX TR-M08 MK SQUARE K KIT R A XNEX TR-M08 MK To place an order, call your local authorized distributor. 17

20 FACEMILLING QUATTROMILL TM -09 The QuattroMill-09 is ideal for precision machining on light duty machines. All QuattroMill cutter bodies are coated for longer tool life, and the inserts are square, adding strength and making them easy to index. MP2500 First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! QuattroMill R220/ Kits P Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Material Material Material Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price QUATTRO P KIT R A SEMX 09T3AFTN-M08 MP QUATTRO P KIT R A SEMX 09T3AFTN-M08 MP QUATTRO P KIT R A SEMX 09T3AFTN-M08 MP QUATTRO P KIT R A SEMX 09T3AFTN-M08 MP QUATTRO P R8 KIT R R R8 SEMX 09T3AFTN-M08 MP M K QUATTRO M KIT R A SEEX 09T3AFTN-ME07 F40M QUATTRO M KIT R A SEEX 09T3AFTN-ME07 F40M QUATTRO M KIT R A SEEX 09T3AFTN-ME07 F40M QUATTRO M KIT R A SEEX 09T3AFTN-ME07 F40M QUATTRO M R8 KIT R R R8 SEEX 09T3AFTN-ME07 F40M QUATTRO K KIT R A SEEX 09T3AFTN-M08 MK QUATTRO K KIT R A SEEX 09T3AFTN-M08 MK QUATTRO K KIT R A SEEX 09T3AFTN-M08 MK QUATTRO K KIT R A SEEX 09T3AFTN-M08 MK QUATTRO K R8 KIT R R R8 SEEX 09T3AFTN-M08 MK Max. Depth of Cut: 0.180" For spare parts see Navigator. To place an order, call your local authorized distributor. 18

21 FACEMILLING QUATTROMILL TM -12 The universal QuattroMill-12 is a workhorse in general purpose machining. QuattroMill facemills feature a superpositive geometry to cut freely in all materials. MP2500 First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! QuattroMill R Kits P Steel - MP2500 Stainless - F40M Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Material Material Material Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Kit Contents Cast Iron - MK1500 EDP Kit Description Cutter Dia. Bore Insert (10 pcs.) Price QUATTRO P KIT R A SEMX 43AFTN-M15 MP QUATTRO P KIT R A SEMX 43AFTN-M15 MP QUATTRO P KIT R A SEMX 43AFTN-M15 MP QUATTRO P KIT R A SEMX 43AFTN-M15 MP QUATTRO P KIT R A SEMX 43AFTN-M15 MP M K QUATTRO M KIT R A SEEX 43AFTN-ME11 F40M QUATTRO M KIT R A SEEX 43AFTN-ME11 F40M QUATTRO M KIT R A SEEX 43AFTN-ME11 F40M QUATTRO M KIT R A SEEX 43AFTN-ME11 F40M QUATTRO M KIT R A SEEX 43AFTN-ME11 F40M QUATTRO K KIT R A SEMX 43AFTN-M15 MK QUATTRO K KIT R A SEMX 43AFTN-M15 MK QUATTRO K KIT R A SEMX 43AFTN-M15 MK QUATTRO K KIT R A SEMX 43AFTN-M15 MK QUATTRO K KIT R A SEMX 43AFTN-M15 MK Max. Depth of Cut: 0.236" For spare parts see Navigator. To place an order, call your local authorized distributor. 19

22 FACEMILLING QUATTROMILL TM -15 The heavy duty QuattroMill-15 makes quick work of the bigger jobs. QuattroMill cutter bodies feature directed through coolant, for longer insert life. MP2500 First choice for steel and stainless steel machining applications, offering combined toughness and wear resistance F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity QuattroMill R Kits P Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Material Material Material Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Bore Insert (10 pcs.) Price QUATTRO P KIT R A SEMX 1505AFTN-M18 MP QUATTRO P KIT R A SEMX 1505AFTN-M18 MP QUATTRO P KIT R A SEMX 1505AFTN-M18 MP QUATTRO P KIT R SEMX 1505AFTN-M18 MP M QUATTRO M KIT R A SEEX 1505AFTN-M17 F40M QUATTRO M KIT R A SEEX 1505AFTN-M17 F40M QUATTRO M KIT R A SEEX 1505AFTN-M17 F40M QUATTRO M KIT R SEEX 1505AFTN-M17 F40M 745 K QUATTRO K KIT R A SEMX 1505AFTN-M18 MK QUATTRO K KIT R A SEMX 1505AFTN-M18 MK QUATTRO K KIT R A SEMX 1505AFTN-M18 MK QUATTRO K KIT R SEMX 1505AFTN-M18 MK Max. Depth of Cut: 0.295" For spare parts see Navigator. To place an order, call your local authorized distributor. 20

23 FACEMILLING DOUBLE OCTOMILL TM The next generation Double Octomill insert features 16 cutting edges, the most edges of any insert designed for a fixed pocket indexable face mill on the market! The cutter features 65Rc HSS pins mounted in the radial and axial walls of the pocket seat for easy indexing and accurate location. MP2500 First choice for steel machining applications, offering combined toughness and wear resistance F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Double OctoMill R Kits P Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Material Material Material Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Group No. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Bore Insert (10 pcs.) Price DOUBOCTO 2.50P KIT R SA ONMU ANTN-M15 MP DOUBOCTO 3.00P KIT R SA ONMU ANTN-M15 MP DOUBOCTO 4.00P KIT R SA ONMU ANTN-M15 MP DOUBOCTO 5.00P KIT R SA ONMU ANTN-M15 MP2500 1, DOUBOCTO 6.00P KIT R S ONMU ANTN-M15 MP2500 1,275 M K DOUBOCTO 2.50M KIT R SA ONMU ANTN-M13 F40M DOUBOCTO 3.00M KIT R SA ONMU ANTN-M13 F40M DOUBOCTO 4.00M KIT R SA ONMU ANTN-M13 F40M DOUBOCTO 5.00M KIT R SA ONMU ANTN-M13 F40M 1, DOUBOCTO 6.00M KIT R S ONMU ANTN-M13 F40M 1, DOUBOCTO 2.50K KIT R SA ONMU ANTN-M15 MK DOUBOCTO 3.00K KIT R SA ONMU ANTN-M15 MK DOUBOCTO 4.00K KIT R SA ONMU ANTN-M15 MK DOUBOCTO 5.00K KIT R SA ONMU ANTN-M15 MK1500 1, DOUBOCTO 6.00K KIT R S ONMU ANTN-M15 MK1500 1,275 Max. Depth of Cut: 0.236" For spare parts see Navigator. To place an order, call your local authorized distributor. 21

24 SQUARE-SHOULDER MILLING NANO TURBO TM For small diameter square-shoulder milling, Nano Turbo has no equal. 6 mm inserts in cutter bodies as small as 3/8" diameter provide great performance and an economical alternative to HSS and solid carbide. F40M PVD coated grade ideal for machining both steel and stainless steel F30M First choice for gray and nodular cast iron, with or without coolant Kit includes one cutter body, ten inserts and a wrench Steel - F40M Stainless - F40M Cast Iron - F30M Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Mat. Max Mat. Max Mat. Max Group slotting Group slotting Group slotting No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) Nano Turbo R Kits P Kit Contents EDP Kit Description Cutter Dia. Shank Insert (10 pcs.) Price NANO.375P KIT R AN XOMX R-M05 F40M NANO.500P KIT R AN XOMX R-M05 F40M NANO.625P KIT R AN XOMX R-M05 F40M NANO.750P KIT R AN XOMX R-M05 F40M M NANO.375P KIT R AN XOMX R-M05 F40M NANO.500P KIT R AN XOMX R-M05 F40M NANO.625P KIT R AN XOMX R-M05 F40M NANO.750P KIT R AN XOMX R-M05 F40M 255 K NANO.375K KIT R AN XOMX R-M05 F30M NANO.500K KIT R AN XOMX R-M05 F30M NANO.625K KIT R AN XOMX R-M05 F30M NANO.750K KIT R AN XOMX R-M05 F30M 255 Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 22

25 SQUARE-SHOULDER MILLING MICRO TURBO TM For light duty, high precision applications, Micro Turbo is the answer. The free cutting, low power consumption design makes Micro ideal for smaller machines as well as long overhangs and challenging machine setups that may lack stability. MP2500 MP2500 inserts for Micro Turbo with the M08 edge preparation are the ideal combination for steel milling, while the ME06 edge makes MP2500 a very effective solution for stainless steel machining F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Micro Turbo R Kits P Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Mat. Max Mat. Max Mat. Max Group slotting Group slotting Group slotting No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Shank Insert (10 pcs.) Price MICRO.625P KIT R AN XOMX TR-M08 MP MICRO.750P KIT R AN XOMX TR-M08 MP MICRO 1.00P KIT R AN XOMX TR-M08 MP MICRO.750P R8 KIT R R8-09-2N R8 XOMX TR-M08 MP MICRO 1.00P R8 KIT R R8-09-3N R8 XOMX TR-M08 MP M K MICRO.625M KIT R AN XOMX TR-ME06 F40M MICRO.750M KIT R AN XOMX TR-ME06 F40M MICRO 1.00M KIT R AN XOMX TR-ME06 F40M MICRO.750M R8 KIT R R8-09-2N R8 XOMX TR-ME06 F40M MICRO 1.00M R8 KIT R R8-09-3N R8 XOMX TR-ME06 F40M MICRO.625K KIT R AN XOMX TR-M08 MK MICRO.750K KIT R AN XOMX TR-M08 MK MICRO 1.00K KIT R AN XOMX TR-M08 MK MICRO.750K R8 KIT R R8-09-2N R8 XOMX TR-M08 MK MICRO 1.00K R8 KIT R R8-09-3N R8 XOMX TR-M08 MK Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 23

26 SQUARE-SHOULDER MILLING SUPER TURBO TM The number one first choice for general-purpose squareshoulder milling applications. Using hardened cutter bodies and 12 mm highly-positive inserts, Super Turbo makes short work of a wide range of materials and applications. MP2500 Super Turbo inserts in MP2500 with the M12 edge preparation are well-suited for steel milling. MP2500 inserts with the ME08 edge geometry give excellent results in stainless F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Kit includes one cutter body, ten inserts and a wrench Super Turbo R Kits P TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Mat. Max Mat. Max Mat. Max Group slotting Group slotting Group slotting No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Shank Insert (10 pcs.) Price SUPER.750P KIT R AN XOMX TR-M12 MP SUPER 1.00P KIT R AN XOMX TR-M12 MP SUPER 1.25P KIT R AN XOMX TR-M12 MP SUPER 1.00P R8 KIT R R8-12-3N 1.00 R8 XOMX TR-M12 MP M SUPER.750M KIT R AN XOMX TR-ME08 F40M SUPER 1.00M KIT R AN XOMX TR-ME08 F40M SUPER 1.25M KIT R AN XOMX TR-ME08 F40M SUPER 1.00M R8 KIT R R8-12-3N 1.00 R8 XOMX TR-ME08 F40M 280 K SUPER.750K KIT R AN XOMX TR-MD13 MK SUPER 1.00K KIT R AN XOMX TR-MD13 MK SUPER 1.25K KIT R AN XOMX TR-MD13 MK SUPER 1.00K R8 KIT R R8-12-3N 1.00 R8 XOMX TR-MD13 MK Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 24

27 SQUARE-SHOULDER MILLING POWER TURBO TM Power Turbo provides the highest metal-removal, yet with its super-positive inserts, makes very good use of machine horsepower, even in demanding applications and difficult materials. MP2500 inserts for Power Turbo in MP2500 with the M14 edge preparation perform extremely well in steel. MP2500 inserts with the ME13 edge prep offer excellent performance in stainless F40M PVD coated grade ideal for machining both steel and stainless steel MK1500 First choice for gray and nodular cast iron, offering maximum performance and productivity Power Turbo R /R Kits P Kit includes one cutter body, ten inserts and a wrench TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Steel - MP2500 Stainless - F40M Cast Iron - MK1500 Feed fz (in/tooth) Feed fz (in/tooth) Feed fz (in/tooth) Mat. Max Mat. Max Mat. Max Group slotting Group slotting Group slotting No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) No. D.O.C. Cutting speed Vc (sfmin) Kit Contents EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price POWER 1.00P KIT R AN XOMX TR-M14 MP POWER 1.25P KIT R AN XOMX TR-M14 MP POWER 1.50P KIT R AN XOMX TR-M14 MP POWER 2.00P KIT R AN XOMX TR-M14 MP M POWER 1.00M KIT R AN XOMX TR-ME13 F40M POWER 1.25M KIT R AN XOMX TR-ME13 F40M POWER 1.50M KIT R AN XOMX TR-ME13 F40M POWER 2.00M KIT R AN XOMX TR-ME13 F40M 330 K POWER 1.00K KIT R AN XOMX TR-MD15 MK POWER 1.25K KIT R AN XOMX TR-MD15 MK POWER 1.50K KIT R AN XOMX TR-MD15 MK POWER 2.00K KIT R AN XOMX TR-MD15 MK Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 25

28 COPY MILLING HIGH FEED High Feed cutters provide very rapid metal removal by effectively thinning the chip with low depth of cut /high feed technology. Ideal for roughing out pockets and enclosed cavities. MP2500 high feed MP2500 inserts with the MD08 or MD11 edge treatment are highly effective in steel, while the M06 or M08 edges are ideal for stainless F40M PVD coated grade ideal for machining both steel and stainless steel MP1500 CVD coated grade for medium to rough milling of hardened steel and cast iron Kit includes one cutter body, ten inserts and a wrench Starting parameters for 100% Radial Engagement Steel - MP2500 Stainless - F40M Cast Iron - MP1500/MP2500 Cutter diameter Cutter diameter Cutter diameter Feed rate (in/rev) Feed rate (in/rev) Feed rate (in/rev) Material Material Material Group No. Group No. Group No. D.O.C. (a p ) D.O.C. (a p ) D.O.C. (a p ) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) High Feed R220/ Kits P TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Kit Contents EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price HIGHFEED.625P KIT R R080.2A T-MD04 MP HIGHFEED.750P KIT R R100.2A T-MD08 MP HIGHFEED 1.00P KIT R R100.3A T-MD08 MP HIGHFEED 2.00P KIT R R160.4A T-04-MD11 MP M HIGHFEED.625M KIT R R080.2A T-M04 F40M HIGHFEED.750M KIT R R100.2A T-M06 F40M HIGHFEED 1.00M KIT R R100.3A T-M06 F40M HIGHFEED 2.00M KIT R R160.4A T-04-M08 F40M 360 K HIGHFEED.625K KIT R R080.2A T-MD04 MP HIGHFEED.750K KIT R R100.2A T-MD08 MP HIGHFEED 1.00K KIT R R100.3A T-MD08 MP HIGHFEED 2.00K KIT R R160.4A T-04-MD11 MP Max. Depth of Cut: refer to Navigator To place an order, call your local authorized distributor. 26 For spare parts see Navigator.

29 COPY MILLING ROUND INSERT round insert, or button cutters, use strong round inserts for roughing of cavities in a range of cutter body diameters ranging from one to three inches. Both Weldon shank and shell mill styles are available. MP2500 button cutters with MP2500 inserts and the M15 edge preparation yield excellent copy milling results in steel. MP2500 inserts with the ME07 edge are well-suited to stainless F40M PVD coated grade ideal for machining both steel and stainless steel MP1500 CVD coated grade for medium to rough milling of hardened steel and cast iron Kit includes one cutter body, ten inserts and a wrench Round Insert R217/ Kits P TM AVAILABLE WITH DURATOMIC TECHNOLOGY! Starting parameters for 100% Radial Engagement Steel - MP2500 Stainless - F40M Cast Iron - MP1500 D.O.C. (a p ) D.O.C. (a p ) D.O.C. (a p ) Material Material Material Group Feed rate (in/rev) Group Feed rate (in/rev) Group Feed rate (in/rev) No No No Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Kit Contents EDP Kit Description Cutter Dia. Bore Shank Insert (10 pcs.) Price ROUND P KIT R F RPHT 1204M0T-M15 MP ROUND P KIT R F RPHT 1204M0T-M15 MP ROUND P KIT R A RPHT 1204M0T-M15 MP ROUND P KIT R A RPHT 1204M0T-M15 MP ROUND P KIT R A RPHT 1204M0T-M15 MP M K ROUND M KIT R F RPHT 1204M0T-ME07 F40M ROUND M KIT R F RPHT 1204M0T-ME07 F40M ROUND M KIT R A RPHT 1204M0T-ME07 F40M ROUND M KIT R A RPHT 1204M0T-ME07 F40M ROUND M KIT R A RPHT 1204M0T-ME07 F40M ROUND K KIT R F RPKW 1204M0T-MD10 MP ROUND K KIT R F RPKW 1204M0T-MD10 MP ROUND K KIT R A RPKW 1204M0T-MD10 MP ROUND K KIT R A RPKW 1204M0T-MD10 MP ROUND K KIT R A RPKW 1204M0T-MD10 MP Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 27

30 COPY MILLING K2 BALLNOSE K2, or K=2 for two effective teeth, features an S-shaped insert in a ballnose configuration. Unique holding technology allows the cutter to perform very well in a range of copy milling applications. F25M added toughness for machining of tool steels and cast iron F40M excellent choice for demanding applications, especially in stainless steels Kit includes one cutter body, ten inserts and a wrench Diameter Starting parameters for full engagement Steel - F25M/F40M Stainless - F40M Cast Iron - F40M/F25M D.O.C. (a p ) D.O.C. (a p ) D.O.C. (a p ) Mat Mat Mat Group Feed rate (in/rev) Group Feed rate (in/rev) Group Feed rate (in/rev) No No No Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Cutting speed Vc (sf/min) Note: The P kits are also suitable for cast iron machining. K2 Ballnose R Kits P Kit Contents EDP Kit Description Cutter Dia. Shank Insert (10 pcs.) Price K2BALL.500P KIT R A ER-M03 F40M K2BALL.625P KIT R A ER-M04 F25M K2BALL.750P KIT R A ER-M05 F25M K2BALL 1.00P KIT R A ER-M07 F25M M K2BALL.500M KIT R A ER-ME03 F40M K2BALL.625M KIT R A ER-ME04 F40M K2BALL.750M KIT R A ER-ME05 F40M K2BALL 1.00M KIT R A ER-ME07 F40M 530 K K2BALL.500P KIT R A ER-M03 F40M K2BALL.625P KIT R A ER-M04 F25M K2BALL.750P KIT R A ER-M05 F25M K2BALL 1.00P KIT R A ER-M07 F25M 530 Max. Depth of Cut: refer to Navigator For spare parts see Navigator. To place an order, call your local authorized distributor. 28