Sl. no Description of Work Unit Quantity Unit rate (BDT) Total cost (BDT) 3. Supplying, fitting and fixing country made Sqm 50

Size: px

Start display at page:

Download "Sl. no Description of Work Unit Quantity Unit rate (BDT) Total cost (BDT) 3. Supplying, fitting and fixing country made Sqm 50"

Alexandra Simpson
5 years ago
Views:

1 Specification for Renovation of Civil and Electrical works, supplying of furniture in Career Guidance & Employment Support Cell of Panchagarh Technical School and College (PTSC). A) Civil works. Sl. no Description of Work Unit Quantity Unit rate (BDT) 1. Supplying, fitting and fixing of country made Sqm 100 mirror polished homogeneous floor tiles irrespective of color & or design, 600 x 600 mm 2. Supplying, fitting and fixing country made Sqm 10 mirror polished homogeneous floor tiles irrespective of color & or design, 300 x 300 mm 3. Supplying, fitting and fixing country made Sqm 50 wall tiles irrespective of color & or design, 300 x 200 mm 4. Stripping of unserviceable plaster in/c racking Sqm 419 out joints, brooming, cleaning etc 5. Minimum 12 mm thick cement sand (F.M. Sqm ) plaster (1:6) having with cement to wall both inner-and outer surface, Quantity same as item No-4 6. Ornamental Wooden door frame including M fitting, fixing and finishing made by Jack wood as per LGED specification. Door Frame 7. Ornamental Wooden door shutter (38mm thick) including fitting fixing & finishing Sqm 8.5 made by Jack wood as per LGED specification. Door shutter 9-0 x10-0 size=90 sft=8.5 m 2 8. Supplying, fitting & fixing of hydraulic door No. 2 closer (big size) inc all necessary tools and accessories etc. all complete 9. Supplying, fitting and fixing MORTICE No. 2 door lock 10. Supplying fitting fixing of LGED standard Sqm 6.45 Thai Aluminum Push Door with 5 mm glass 2.13m x1.06m=2.15m 2 3 nos 11. Supplying fitting and fixing of LGED Sqm standard Thai Aluminum window with 5 mm glass 12. Fabricating, fitting & fixing of 3 collapsible Sqm 17 gates, 3mm x 25.4mm angle and 19 mm flat bar total 17 m Fabricating fitting and fixing of Window grill with 12 mm flat bar as measured of item no11 Sqm Total cost (BDT)

2 14. Plastic emulsion paint with using proper Sqm 419 sealer mixed with Dr. Fixit solution for proper protection of wall and line putting of 2-3 coats of LGED standard using approved best quality /branded color from authorized local agent of the manufacturer in a sealed container 15. Scrapping of old mosses & paint. same as Sqm 419 item Painting window grill and collapsible gates in Sqm two coats with approved best quality synthetic enamel paint 17. Notice Board (12'x4' size) Made with ¾" thick No. 1 partex board outer frame made with kathal wood 18. A celluloid/crystal sheet Name plate 6 x1.5 No. 1 ( Career Guidance and Employment Support Cell ) fitting, fixing in position etc 19. Designed melamine / plastic, Door with frame No. 2 shutter, fitting, fixing in position 1x2'-6"x7'- 0") Toilet 20. Taking out & Re-fitting door after necessary No. 7 Repair/cutting work in/c necessary hinge, screws etc. 21. Supplying, fitting and fixing gypsum board Sqm 60 ceiling of 9 mm thick board laminated by mechanical hot press with a milk white PVC membrane with Aluminum 22. Supplying, fitting and fixing of wash room No. 2 with standard commodes, Basin and other necessary fittings 23. Supplying, fitting and fixing of 1.37 m x0.6 m No. 1 Basin cabinet Top will made with Granite, drawer with Plastic board laminating with Color Glass, Standard Sink Tap and other necessary fittings 24. Picking-up unserviceable patent stone, situ Sqm 132 mosaic from floor, walls, dado etc 25. Outside Space cleaning & Development with M earth excavation sand feeling, Leveling over drain & floor net finishing 26. Master/weather coat painting to surrounding walls Sqm 46

3 B) Electrical Works. 1. Concealed Conduit wiring. i) Light point = 20 Point No. 20 ii) Fan point = 10 Point No Cables manufactured by Meter 600 BRB/Paradise/Eastern Cable a) ic-2x1.5 sqm (BYM) cable = rm 3. Providing & fixing of specified design LED No. 5 tube light fitting etc. all compt. Lobby 4. Providing & fixing ceiling mounted surface No. 15 type specified design LED tube light supply and fitting etc. 5. Providing & fixing fancy single bracket light supply and fitting. C&G No Supplying, fitting & fixing, testing, No. 2 Commissioning of split type (International brand General/Carrier/Mitsubishi brand) A/C. a) BTU/HR Capacity. 7. TP-MCB, Supply and fitting fixing 50 amps No Prov. fixing 3mm thick ebonite sheet cover. No Gang switch :a) Four gang switch No. 10 b) Gang Type Socket No. 10 c) Gang type Fan regulator. = 10 Nos 10. Supply & fixing of Branded best quality selling Fan accepted by the principal, PTSC - 56" 11 Supply & fixing 250 Volt, single phase, 3-pin 15/16 amps combined switch socket outlet concealed type etc. 12. Concealed conduit wiring with following PVC included and sheathed standard cable (BYM). Cable manufactured by Eastern Cable/Paradise Cable/BRB Cable. a) ic-2x2.5 sq mm (BYM) cable with 2.5 sqm for Computer b) ic-2x6 sq mm (BYM) for Computer & A/C No. 10 No. 10 Meter 300 Meter 300

4 C) Furniture. 1 Three seated Waiting Bench 70 x20 Stainless steel Handle and frame from Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) 2 Tea Table matching with waiting bench 2 no High quality reputed branded 3 Waiting Bench, 4 seated, S.S frame /plastic seats fixed in floor, should be durable in using roofless floor ( Otobi/Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture) 4 Executive Table (Full seasoned wood made) size (1400x750x750) mm (Otobi /Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture) 5 Executive Chair-1 no matched with the Table, (Otobi /Hatil/Aktar or accepted any reputed brand and similar or equal to attached picture) 6 Visitors Chair matched with the Table, handle top with wood, (match similar or equal to attached picture) 7 Setting of Special workstation 1200 mm x 350 mmx 750 mm for staff with facility of computer desk (Otobi/Hatil/Aktar or accepted any reputed brand) 8 Conference Table L- 3m and w-1.5 m h m size. Full season Jack wood (Kathal)/melamine board laminating with 10mm edging and formica made. Folding and part by part is preferable. 9 Conference Chair matched with the conference table Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) 10 Conference Table guest chair Atoby/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) --3 nos 11 Conference Room Tablet chair Otobi/Hatil/Aktar or accepted any reputed brand (similar or equal to attached picture) --20 nos 12 Career Guidance Desk and shelf attached with the Column wall 860mm x 3048mm x305 mm with required drawer & shelf 13 Setting of Special 5 workstation for student s/ graduate s/ jobseekers with facility of 5 computer desk. No. 2 No. 2 No. 4 No. 1 No. 1 No. 2 No. 1 No. 1 No. 15 No. 3 No. 20 No. 1 No. 5

5 Work place: Panchagarh Technical School & College, Panchagarh. The proposal should be made on paper with a printed letterhead and delivered to: Cezar Dragutan B-SEP Project ILO Dhaka House # A-9, Road # 127 Gulshan 1, Dhaka-1212 Proposal/quotation submits along with updated copy of trade license and sample copies of experience in successful completion of similar nature of work. Price should be quoted including installation, carrying, and other necessary cost. ILO is not liable for any VAT & TAX. After completion of the works contractor should collect successful work completion certificate from the Principal, Panchagarh Technical School & College, Panchagarh. Before submitting the proposal/quotation vendors are hardly requested to visit the Work Place and get clear understand/idea about the nature of renovation work, quality of the materials, Nature of furniture and fixture required upon meeting/discussion with Principal of Panchagarh Technical School & College. Contact no. T & T # , Cell # or OC Career Guidance officer All items should be mentioned with proper specifications and warranty for proper evaluation of the proposal. Submission of the quotation/proposal on or before 22 nd February 2016.

6 Pictures Picture for item no. 13 Picture for item no. 1

7 Picture for item no. 3 Picture for item no. 4

8 Picture for item no. 5 Picture for item no. 6 Picture for item no. 9 Picture for item no. 10

9 Picture for item no 11

Type D. Ver. Ver. 6'-11"x 4'-8" Maid. 7'-5"x 4'-0" 6'-6"x 4'-7" Toilet. Kitchen. 5'-0"x 8'-1" 9'-1" X 8'-1" Living 11'-11"x 16'-8" 10'-9"x 12'-6"

Type D. Ver. Ver. 6'-11x 4'-8 Maid. 7'-5x 4'-0 6'-6x 4'-7 Toilet. Kitchen. 5'-0x 8'-1 9'-1 X 8'-1 Living 11'-11x 16'-8 10'-9x 12'-6 R O A D O : 10 A S T y p i c a l F l o o r P l a n ( 2nd to 5th floor) Bed-2 14'-8"x 12'-0" 11'-3"x 12'-6" 9'-0"x 10'-4" 6'-11"x 5'-0" Bed-4 12'-6"x 9'-0" 12'-7"x 10'-1" 4'-6"x 11'-3" 12'-11" X 10'-9"