Intergraph Process, Power & Marine Technical User Forum (TUF) Meetings

Transcription

1 Intergraph Process, Power & Marine Technical User Forum (TUF) Meetings Sunday, June 3, 2012 MGM Grand Resort; Las Vegas, Nevada USA All TUF meetings will be on the third floor of the MGM Grand Convention Center. There is no cost to attend, and lunch will be provided. When registering for Hexagon 2012, please select which TUF meetings you would like to attend to ensure proper space. To register for the conference: 3D & VISUALIZATION TUF The goal of the 3D & Visualization TUF meeting is to allow experienced Smart 3D (SmartPlant 3D, SmartMarine 3D and SmartPlant 3D Materials Handling Edition) users additional time to share, educate, and network. Join fellow Smart 3D super-users from every discipline as they meet face to face to exchange work process insight and experiences that will help everyone be more productive. TUF meeting attendees should be prepared to discuss their own experiences during this interactive time. Intergraph s Smart 3D product owners and TUF leaders will also participate to help answer questions and guide the user-led discussions.

2 3D & Visualization TUF Room 320 Topic / Discussion Leader 8:00 a.m. Introductions (Tom Szoka, Intergraph) Regional TUFs: Brief updates from regional TUF chairs (Various) LinkedIn discussion and demonstration (Robert Christian, Intergraph) Red Shirt" Discussion (Tom Szoka, Intergraph) 3D update (Tom Szoka, Intergraph) 3D sessions at Hexagon 2012 Intergraph s status of topics in breakout sessions Review agenda of breakout sessions (Luther Walke, Intergraph) ROOM 320 ROOM 318 9:15 a.m. Design Reuse (Walke) Structure (Aimee Ferguson, Intergraph) 10:15 a.m. Break / Networking 10:30 a.m. 3D Interop (Formerly Reference 3D, Robert Christian, Intergraph) Laser Scanning (Satish Hota, Intergraph) 11:30 a.m. TUF lunch Room :30 p.m. SmartPlant Reference Data Integration (Luther Walke, Intergraph) SmartPlant Review Direct (Robert Christian, Intergraph) 1:30 p.m. Break / Networking 1:45 p.m. SmartPlant Review Usability (Robert Christian, Intergraph) P&ID Integration (Satish Hota, Intergraph) 2:45 p.m. Break / Networking 3:00 p.m. Drawings (Patrick Caffey, Intergraph) SmartPlant Review Simulation and Animation (Robert Christian, Intergraph) 4:00 p.m. Hangers and Supports (Brant Remenda, Intergraph) Piping Isometrics (Jim Edwards, Intergraph)

3 5:00 p.m. Formal meeting close / Networking ENGINEERING & SCHEMATICS TUFs Instrumentation, Electrical & P&ID Combined Meeting The PP&M Global Technical Users Forum chairmen and Intergraph invite you to attend the SmartPlant Instrumentation. Electrical, and P&ID Global TUF meetings to be held on Sunday, June 3 prior to the HEXAGON 2012 conference at the MGM Grand Resort & Casino in Las Vegas. If you are attending the conference and have an interest in any of these products, we urge you to come a day early and attend this Users Forum. The Instrumentation Electrical & Process Design TUFs will meet in a combined session before breaking into subject-area meetings in the afternoon. The meeting is open to all current users of SmartPlant Instrumentation, SmartPlant Electrical, and SmartPlant P&ID. The global TUF meeting s objective is for the members of the instrumentation, electrical, and process design communities and users of SmartPlant Instrumentation, SmartPlant Electrical, and SmartPlant P&ID to gather and discuss issues of interest, as well as to provide Intergraph with feedback from the customer community on its needs. Intergraph will also present short- and medium-term software development plans to the user communities. Instrumentation, Electrical & P&ID Combined TUF Room 313 Topic 8:00 a.m. Opening remarks (John Dressel, Fluor, Scott Hendrickson, Burns & McDonnell and Joe Lawrence, Mustang - TUF chairs) 8:15 a.m. Think Forward - SmartPlant Engineering & Schematics (Frank Joop, Intergraph) 8:30 a.m. Think Forward - Innovation (Meir Stein, Guy Masin and Mike Herod, Intergraph) 8:45 a.m. Think Forward - Innovation - Common Tasks across Engineering & Schematics 9:00 a.m. Think Forward - Innovation - Leveraging the Benefits of Data 9:15 a.m. Think Forward - Innovation - Support of Newer Industry Technologies 9:30 a.m. Think Forward - Lowering Cost of Ownership

4 9:45 a.m. Think Forward - Support of Industry Work Processes 10:00 a.m. Break/Networking 10:15 a.m. SmartPlant Instrumentation, SmartPlant Electrical, and SmartPlant P&ID interfaces using SmartPlant Foundation (John Dressel, Fluor) 11:15 a.m. Moderated discussions: Think Forward - SmartPlant tools at EPC to Owner turnover Think Forward - SmartPlant Technical User Forums 11:30 a.m. TUF lunch Room 319 1:00 p.m. Instrumentation, Electrical & Process Design breakout meetings Instrumentation Breakout Meeting The SmartPlant Instrumentation TUF Breakout session will focus on the demands of using SmartPlant Instrumentation in both the EPC and owner operator environments with emphasis on interfaces and integration. The session will review the CR ranking process and the use of SmartPlant Instrumentation with emerging wiring technologies. Other discussion items planned for this session include: Users experiences with SmartPlant Instrumentation Owner operator considerations with SmartPlant Instrumentation Communication between users and Intergraph representatives New capabilities and function of SmartPlant Instrumentation Instrumentation TUF Room 313 Topic 1:00 p.m. Opening remarks (John Dressel, Fluor, Instrumentation TUF chair) 1:15 p.m. SmartPlant Instrumentation update (Guy Masin, Intergraph) SmartPlant Instrumentation release plans and schedules SmartPlant Instrumentation 2009 SP4 release features SmartPlant Instrumentation 2013 release planned features

5 SmartPlant Instrumentation future release plans 2:00 p.m. SmartPlant Instrumentation CR ranking presentation (Dennis Cooley, Cooley Core) 2:30 p.m. Break / Networking 2:45 p.m. TUF member technical presentations for SmartPlant Instrumentation use and improvements Optimizing the Import Module (Nezar Faitouri, Mangan) Documenting Special Systems (John Dressel, Fluor) Integration of SPI Data (Gene Haney, CB&I) 3:45 p.m. Forum discussion on specific SmartPlant Instrumentation issues Owner operator issues SmartPlant Foundation Using SmartPlant Instrumentation 2009 Additional topics 4:15 p.m. Open Q&A session 4:30 Formal meeting close / Networking Electrical Breakout Meeting The Electrical TUF breakout session allows current users of SmartPlant Electrical to share experiences, learn from others, and help the direction of the product in an open dialog setting. During this session, attendees will discuss the new functionality expected in the next release and workflows that can be enhanced with integration and automation layer. Other discussion items planned for this session include: Users sharing experiences with SmartPlant Electrical Presentations from users on possibilities of using automation layer and other interfaces Exchange ideas and experiences among peers and Intergraph representatives Discuss and learn about new product capabilities delivered in recent releases

6 Electrical TUF Room 314 Topic / Discussion Leader 1:00 p.m. Opening remarks (Scott Hendrickson, Burns & McDonnell, SPEL TUF Chair) 1:05 p.m. SmartPlant Electrical product update (Meir Stein, Intergraph) SmartPlant Electrical 2009 SP 5 next service pack overview / main features SmartPlant Electrical 2013 next major release overview / main features Future version initiatives 1:30 p.m. Overview of Automation Layer and SPF Integration Enhancements (Meir Stein, Intergraph) 1:50 p.m. SmartPlant Electrical Reports Manager (Majed Abouhatab, Intergraph) 2:00 p.m. Break / Networking 2:15 p.m. SmartPlant Electrical Integration with SmartPlant 3D (Scott Hendrickson, Burns & McDonnell) 2:30 p.m. Open dialog to discuss open issues and ranking (Scott Hendrickson, Burns & McDonnell) 3:30 p.m. Roundtable - Attendees bring topics to discuss 4:15 p.m. Closing remarks (Scott Hendrickson, Burns & McDonnell) Update on LTUFs 4:30 Formal meeting close / Networking Process Design & Engineering Breakout Meeting The Process Design & Engineering TUF meeting is open to all current users of Intergraph SmartPlant P&ID. The meeting will provide a forum to exchange ideas among fellow users and Intergraph representatives. During the meeting, TUF chairpersons will discuss the previous year s activities and mention upcoming planned events. There will be an overview of upcoming releases for SmartPlant P&ID, followed by questions and answers.

7 Process Design & Engineering TUF Room 312 Topic / Discussion Leader 1:00 p.m. Opening remarks (Joe Lawrence, Mustang, SmartPlant P&ID TUF Chair) 1:05 p.m. SmartPlant P&ID integration with SmartPlant Foundation (Mike Herod, Intergraph) TBD TBD 1:30 p.m. Presentation on SmartPlant P&ID 1:50 p.m. Presentation on SmartPlant P&ID Data Editor 2:00 p.m. Break / Networking 2:15 p.m. User story: TBD (TBD) 2:30 p.m. Open dialog to discuss open issues (TBD) 3:30 p.m. Roundtable: Attendees bring topics to discuss 4:15 p.m. Closing remarks (Joe Lawrence, Mustang) Update on LTUFs 4:30 Formal meeting close / Networking INFORMATION MANAGEMENT & INTEGRATION TUF The Information Management & Integration (IM&I) Technical User Forum (TUF) will conduct its annual review of the SmartPlant Foundation (SPF) and SmartPlant Enterprise for Owner Operators (SPO) solutions. Join fellow Information Management users as they meet face to face to exchange work process insight and experiences to help make everyone more productive. TUF attendees should be prepared to discuss their own project experiences during this interactive time and help set software development priorities for future releases. Previewing SmartPlant Foundation 2009 R4, this review will cover the strategic direction for SPF, new modules for the SPF core platform, and significant new features to increase productivity and enhance performance, including server caching, multi-cpu performance enhancements, integration efficiency improvements, web portal enhancements and simplified configuration & mapping.

8 For SmartPlant Enterprise for Owner Operators (SPO) the scope of existing SPO template solutions further increased. In this update we will be presenting the new SPO Completions solution covering the whole life-cycle of completions activities through goods receipt, pre-mechanical completions, mechanical completions, commissioning, preservation and pre-start-up and safety checks. We will also be introducing a Requirements Management & Tracking solution tracing legislative, regulatory authority, corporate and user requirements and how these are satisfied on your plant. Information Management & Integration Room 311 Topic 08:30 a.m Opening Remarks& Introductions (Neil Bonel Worley Parsons TUF Chair) 08:40 a.m Regional TUF Activity Regional TUF Chairs 09:10 a.m Information Management Strategy Update (Rick Standish Intergraph) - Modularization - New Licensing Mechanisms 09:40 a.m SPF 2009 R4 Product Update (Rick Standish / Trent Pope / Allen Egnor Intergraph) 10:30 a.m Break and Networking 10:45 a.m SmartPlant Enterprise For Owner Operators Update (Adrian Park / Dell Wilson Intergraph) 11:30 a.m. TUF lunch Room :30 p.m. Shared Project Experiences TUF Members Short Presentations on project experiences & potential enhancements 1:30 p.m. Forum Discussion on Issues and TUF Ranking of priorities 2:00 p.m. Break and Networking 2:20 p.m. Forum Discussion on Issues and TUF Ranking of priorities (continued) 3:30 p.m. Capture of discussion priorities and AOB 3:45 p.m. Formal Meeting Close / Networking

9 MATERIALS MANAGEMENT TUF The SmartPlant Materials Technical User Forum (TUF) is open to all current users of the Intergraph SmartPlant Materials product suite. This TUF provides a forum for exchange of ideas between fellow users and Intergraph representatives. Benefits of TUF membership will be discussed, and new clients are encouraged to join. During the session, the previous year s TUF activities and achievements will be reviewed. Changes in SmartPlant Reference Data, SmartPlant Materials, and Standard Database will be shown as an overview. A question-and-answer period will follow, as well as action items for will be determined. The Materials TUF Meeting will start promptly at 9:00 a.m. Materials Management TUF Room 309 Topic 08:30 a.m. Meet & Greet 09:00 a.m. Introductions & Review of the (Clayton Cooper, Air Liquide) 09:15 a.m. TUF Organizational Meeting & Objectives (Clayton Cooper, Air Liquide) 09:40 a.m. TUF Communication (Clayton Cooper, Air Liquide) 10:00 a.m. Product Update (Guido Hufer, Intergraph) 10:30 a.m. Business Update (Chuck Gill, Intergraph) 11:00 a.m. Regional Reports (Clayton Cooper, Air Liquide / Chris Why, Callum Ford, Intergraph) 11:30 a.m. TUF lunch Room :30 p.m. Thomas.Net Update (Peter Mooney, Thomas Industrial Network) 1:00 p.m. Intergraph Presentation - SmartPlant Materials Product News (Guido Hufer, Intergraph) 1:40 p.m. Break Out Session (groups break out by module and the groups develop a list of priority actions for Intergraph to focus on for 2012) 3:30 p.m. Presentation of the Break Out Results (Guido Hufer, Intergraph) 4:15 p.m. Wrap Up

10 ENGINEERING ENTERPRISE ADVISORY BOARD The Engineering Enterprise Advisory Board (EEAB) Meeting will be held for the second time. The meeting is for clients of executive (technical) level. This meeting aims to provide an opportunity for the industry executives to openly discuss Intergraph business (product) strategy and to expand their knowledge of Intergraph Process, Power and Marine solutions and services. Engineering Enterprise Advisory Board Grand Garden Studio 6 Topic 2:30 p.m. Opening Remarks& Introductions (Mirko Stock / Rick Standish - Intergraph) 2:40 p.m. Progress on the Top 12 Tactical Initiatives 1) Master Tag Registry (Allen Egnor, Intergraph) 2) Deliver Complete OOTB Mapping For All Tools (Allen Egnor, Intergraph) 3) Improve Performance on a Very Large Dataset (John Simpson) 4) Make Sure All Applications Are 64bit Compatible (Melanie Eakes / Charles Evans - Intergraph)] 5) Improve SPPID/SP3D Correlation (Satish Hota, Intergraph)] 6) Increase Resourcing for critical development initiatives (Patrick Holcomb / Charles Evans - Intergraph) 7) Ensure an EASY administration that can be done by project and business owners (Rick Standish, Intergraph)] 8) Create an intuitive to-do list (Allen Egnor, Intergraph) 9) Improve S3D to SPF/SPR publish performance (Robert Christian, Intergraph)] 10) Improve the S3D publish by optionally including data with all containers (Tom Szoka, Intergraph) 11) Develop licensing for integration (Rick Standish, Patrick Holcomb - Intergraph) 12) Provide flexible and controlled integrated workshare for JVs and sub-contractors (Mirko Stock, Rick Standish, Intergraph) 4:40 p.m. Break and Networking 4:55 p.m. Product and Solution Initiatives

11 - SPF Modularization (Rick Standish, Intergraph)] - SPO Template Solution Expansion (Mirko Stock, Intergraph) 5:25 p.m. TUF Formation & Open Forum Discussions 6:00 p.m. Meeting Closes Cocktails & Networking Document Version 3, May 16, 2012