SecuritBasic. Contents. Ref.-No. Description / Application Product m² List kg
|
|
- Lynne Cross
- 5 years ago
- Views:
Transcription
1 Ref.-No. Description / Application Product m² List kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless another measure is shown. Contents Alu(minium) platform M 1690 SB...41 Alu(minium) platform M 2470 SB with hatch...42 Alu(minium) platform M SB...41 Alu(minium) platform ST 1590 SB...43 Alu(minium) platform ST 2370 SB with hatch...43 Alu(minium) platform ST SB...42 Flange screw...51 Front railing post SB, retractable...45 Ladder fixture panel SB...51 Ladder fixture railing SB...50 Lifting arm 1000/1750 SB...49 Protection bracket SB...44 Rear railing frame 1650 SB...47 Rear railing frame IE 1650 SB...47 Rear railing frame M SB...46 Rear railing frame ST SB...46 Rear railing post SB...50 Scaffolding bracket 880 SB...40 Scaffolding bracket SB...40 Scaffold tube SB...45 Side railing SB hinged...49 Support for wooden platform...44 Support railing post SB, retractable...45 Swivel-joint coupler 48/ Telescopic ladder SB...48 SB 39
2 Scaffolding bracket SB Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel s multi-function profile. The aluminium platform is placed onto the scaffolding bracket and secured with the integrated bolt. Front railing and rear railing posts can be plugged into the scaffold ing bracket. The flange screws 28 and 18 must be ordered separately Scaffolding bracket SB Scaffolding bracket 880 SB Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel s multifunction profile. Is used in inside corner areas only. The aluminium platform is placed onto the scaffolding bracket and secured with the integrated bolt. A front railing post can be plugged into the scaffolding bracket. The flange screws 28 and 18 must be ordered separately Scaffolding bracket 880 SB SB 40
3 Alu(minium) platform M SB Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for Mammut 350 and Mammut panels that are 250 cm and 125 cm wide Alu platform M 2470 SB Alu platform M 1220 SB Alu(minium) platform M 1690 SB Inside corner platform. Usable for Mammut 350 and Mammut panels that are 250 cm wide. Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m² Alu platform M 1690 SB SB 41
4 Alu(minium) platform M 2470 SB with hatch Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for Mammut 350 and Mammut panels that are 250 cm wide Alu platform M 2470 SB with hatch Alu(minium) platform ST SB Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for StarTec panels that are 240 cm and 135 cm wide Alu platform ST 2370 SB Alu platform ST 1320 SB SB 42
5 Alu(minium) platform ST 1590 SB Inside corner platform. Usable for StarTec panels that are 240 cm wide. Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m² Alu platform ST 1590 SB Alu(minium) platform ST 2370 SB with hatch Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for StarTec panels that are 240 cm wide Alu platform ST 2370 SB with hatch SB 43
6 Protection bracket SB The protection bracket SB is plugged into the aluminium platform and attached to the wooden compensation platform with two or more wooden screws, dia = 6 mm. Each compensation bracket requires a minimum of two proctection brackets SB. They must be arranged in diagonal order Protection bracket SB Ø 0.8 Support for wooden platform Galvanized. Is used to attach a wooden platform to the scaffolding bracket SB. The support is screwed to the wooden platform and then secured to the scaffolding bracket SB with the integrated pin Support for wooden platform Swivel-joint coupler 48/48 Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required Swivel-joint coupler 48/ SB 44
7 4 Front railing post SB, retractable Galvanized, dia mm. Is used to install a retractable front railing SB made of scaffold tubes. On the facing side of the platform, one rectractable front railing post is attached with the left retractable support to scaffolding bracket and the other rectractable front railing post is attached using the right retractable support Front railing post SB retractable Support railing post SB, retractable Galvanized. Is used for the retractable front railing SB made of scaffold tubes. The support is attached to the scaffolding bracket with a bolt and a cotter pin Support railing post SB le, retractable Support railing post SB ri, retractable Scaffold tube SB Galvanized. Is used to assemble front railings for aluminium platforms. Ø Scaffold tube 48.3/2470 SB Scaffold tube 48.3/2370 SB Scaffold tube 48.3/1320 SB Scaffold tube 48.3/1220 SB (237/132/122) SB 45
8 Rear railing frame M SB Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms M 2470 SB and M 1220 SB Rear railing frame M 2470 SB Rear railing frame M1220 SB Rear railing frame ST SB Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms ST 2370 SB, ST 1550 SB and ST 1320 SB Rear railing frame ST 2370 SB Rear railing frame ST 1550 SB Rear railing frame ST 1320 SB (122) (155/132) 3 SB 39
9 Rear railing frame 1650 SB Galvanized. Is suspended into the adjacent rear railing frames. With handrail, mid rail and toe board. Usable for aluminium platform M 1690 SB when used to bridge gaps Rear railing frame 1650 SB Rear railing frame IE 1650 SB Galvanized. With toebord, mid rail Rear railing frame IE 1650 SB and hand rail. Is suspended at the rear railing posts and above all used in inside corner areas SB 40
10 Telescopic ladder SB Galvanized. For all aluminium platforms with hatch Telescopic ladder SB Telescopic ladder SB Adjustment range Adjustment range SB 41
11 Lifting arm 1000/1750 SB Galvanized. Is required to save the platform railing from damages when erecting, transporting or laying down the formwork with assembled Securit- Basic system. Load capacity per M lifting arm 1750 SB is 1750 kg and per ST lifting arm 900 SB is 900 kg. Always use two lifting arms per transport unit M lifting arm 1750 SB ST lifting arm 900 SB ,7 16,6 18,7 45,7 127, , ,7 16,2 30,6 Side railing SB hinged Galvanized. The hinged front railing is attached to the rear railing frame. When locked and used as a fall-down protection, the hinged front railing is safely locked into position with a wedge. When not used for protection, the hinged front railing can be opened towards the rear front railing on either side Side railing hinged SB Can be extended up to 30 cm SB 42
12 Rear railing post SB Galvanized. Dia mm. Is plugged into the scaffolding bracket and usable for all rear railing frames Rear railing post SB Ladder fixture railing SB Galvanized. Is required and used to Ladder fixture railing SB attach the ladder to the handrail of the platform when a formwork unit is height-extended and equipped with platforms on at least two levels SB 43
13 Ladder fixture panel SB Galvanized. Is used to attach the ladder to the bottom of the bottom panel. Flange 18 must be ordered separately Ladder fixture panel SB Flange screw Galvanized. Is used to attach accessories such as brace frames, push-pull props and alignment rails. Length of thread is 18 and 27 cm Flange screw Flange screw ,4 19,1 4, (26.5) 4.8 (5) SB 44
14 Notes SB 45
15 Notes SB 46
16 Notes SB 47
17 Headquarters Logistics Center International Sales & Servicer MEVA Schalungs-Systeme GmbH Industriestrasse 5 D Haiterbach Tel Fax info@meva-international.com A-Pfaffstätten, Tel D-Berlin, Tel D-Haiterbach, Tel D-Hannover, Tel GB-Tamworth, Tel H-Budapest, Tel RO-Bucuresti, Tel RUS-Moskva, Tel USA-Springfield, Tel A-Pfaffstätten, Tel AUS-Adelaide, Tel B-Kruibeke, Tel CDN-Toronto, Tel CH Seon, Tel CO-Bogotá, Tel F Sarreguemines, Tel GB Tamworth, Tel H Budapest, Tel HR-Bestovje, Tel IND-Mumbai, Tel LT-Kaunas, Tel MAL-Perak, Tel N-Oslo, Tel NL Gouda, Tel PA-Panama City PL-Bialystok, Tel RO Bucuresti, Tel RUS Moskva, Tel RUS Sankt-Peterburg, Tel SGP-Singapore, Tel SLO-Petrovce, Tel UAE Dubai, Tel USA Springfield, Tel
Mammut XT. Mammut XT. New
Mammut XT Mammut XT New Choose. Set. Done: Tie from One Side. Or Both! The new wall formwork system for civil engineering and architectural construction Tieing from one side only can be an advantage when,
More informationStarTec. Multi-Purpose Formwork
StarTec Multi-Purpose Formwork Flexible, universal formwork solution StarTec has the answer to many different challenges The universal steel formwork that is capable of accommodating fresh concrete pressures
More informationMevaDec Slab Formwork
MevaDec Slab Formwork MevaDec: The Labour Saver Flexible in all directions MevaDec offers a flexible answer to nearly any slab task in one system, even for slab thicknesses of well over 30 cm. The system
More informationThe New Used Formwork Brand. With Double Warranty.
The New Used Formwork Brand. With Double Warranty. The MEVA Standard for Used Formwork The Unique Used Formwork Brand The MEVA Original Used Formwork brand gives you the assurance of highest MEVA quality
More informationMGS: All-Round Protection in High Rise. Rail-Guided Automatic or Crane Lift.
MGS Guided Screens MGS: All-Round Protection in High Rise. Rail-Guided Automatic or Crane Lift. Climbing by hydraulic lift or by crane MGS is a rail-guided climbing system which is lifted from one level
More informationMEVA Special Designs
MEVA Special Designs MEVA runs a separate production facility for special designs and is specialised on designing, developing and manufacturing custom-built formwork for extraordinary geometries. Your
More informationMGC: Rail Guided Climbing. Hydraulic or Crane Lift. Safe. Fast. Flexible.
MGC Guided Climbing MGC: Rail Guided Climbing. Hydraulic or Crane Lift. Safe. Fast. Flexible. Climb with hydraulic or crane lift MGC is the rail-guided climbing system set out for hydraulic lifts as well
More informationMEVA FormSet. System-independent accessories
MEVA FormSet System-independent accessories Box out solutions made simple Box out corner Easier working, lower labour costs MEVA's box out solutions offer the unbeatable advantages of easy handling coupled
More informationReferences High Rise Construction
References High Rise Construction Arabtec (United Arab Emirates) built the world s highest building the Burj Khalifa together with Samsung (Korea), Besix (Belgium) and Turner Corporation (USA), relying
More informationMEVA Guide to Safety
MEVA Guide to Safety A clean health and safety record has become a key performance indicator for all top contractors across the world. This series in FormworkPress addresses the framework in various national
More informationMAXIMO MXH Heated Formwork The cost-effective solution for concreting operations at low temperatures. Product brochure
MAXIMO MXH Heated Formwork The cost-effective solution for concreting operations at low temperatures Product brochure Product advantages MAXIMO MXH Heated Formwork The cost-effective solution for concreting
More informationRAPID Column Formwork For the highest requirements on concrete surfaces and edge formation. Product Brochure Issue 10/2017
For the highest requirements on concrete surfaces and edge formation Product Brochure Issue 10/2017 Content System advantages 5 For the highest requirements on concrete surfaces and edge formation 8 For
More informationGRIDFLEX The flexible slab formwork with safe accessible grid elements
GRIDFLEX The flexible slab formwork with safe accessible grid elements 07044 Edition 04 2011 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax
More informationJuly Climbing Scaffold with retractable formwork Instructions for erection and use
July 2008 Climbing Scaffold with retractable formwork Instructions for erection and use Contents Page Important remarks 2 Product features 2 Overview of climbing system Components 4 11 Assembly 25 Climbing
More informationModular Scaffolding MEKA 48
Modular Scaffolding MEKA 48 MODULAR SCAFFOLDING MEKA 48 MODULAR SCAFFOLDING The Modular Scaffolding MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a wide range
More informationRolling Towers. Layher Rolling Towers Uni Wide. Safety Structure Instructions for Assembly and Use. Mobile working platforms to DIN EN 1004:
Layher Rolling Towers Uni Wide Safety Structure Instructions for Assembly and Use Mobile working platforms to DIN EN 1004:2005-03 Working platform 1.5 x 2.85 m Rolling Towers max. working height: indoors
More informationmodular scaffolding R+
modular scaffolding R+ 1. Stand 6. Transverse U-transom Stand is the main element of modular scaffolding. Made of 48.2x3.2 mm steel pipe. Every 0,5m on the whole stand length are installed steel plates
More informationCircular formwork Radius Technical Instruction Manual
Circular formwork Radius Technical Instruction Manual Product features Radius is a circular formwork that allows adjustable radii. Pre-assembled standard panels with powder-coated steel profiles provide
More informationSTABILO. System Parts Facade Scaffold. Vertical Frame (Steel) Vertical Frame (Aluminium) Vertical Frame. Vertical Frame (Aluminium) (Steel)
STABILO STABILO ø 48.3 x 4.0 mm Weight kg 6,0 14,0 19,0 Art.-No. 700193 700186 700179 Vario Equipped with exchangeable stabilizer Weight kg 3,5 6,0 8,0 Art.-No. 700223 700216 700209 Vario ø 48.3 x 4.0
More informationModular Scaffold MEKA 48
Modular Scaffold MEKA 48 Imperial units NA MODULAR SCAFFOLD MEKA 48 MODULAR SCAFFOLD The Modular Scaffold MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a
More informationEcoAs Technical Instruction Manual
Technical Instruction Manual Product features EcoAs is a small-sized, versatile and adaptable formwork system and most suitable for contractors involved in structural and civil engineering projects. EcoAs
More informationMammut 350 Technical Instruction Manual
Mammut 350 Technical Instruction Manual Product features The Mammut 350 formwork is based on the experience made with the Mammut wall formwork since 1982. Mammut 350 offers the following improvement: Seven
More informationdistribution Modular Scaffolding
Modular Scaffolding Modular scaffolding PDM Universal scaffolding system plettac-pl PDM Application A characteristic feature of plettac PDM system is the use of wedge joint which provides quick and safe
More information3.1. FOLDABLE WORKING PLATFORMS. and accessories
.1. FOLDABLE WORKING PLATFORMS and accessories SAFETY TECHNOLOGY FOLDABLE WORKING PLATFORMS AND ACCESSORIES GENERAL INFORMATION INDEX General information.....................................................................
More informationAluFix Technical Instruction Manual
AluFix Technical Instruction Manual General Notes AluFix is a versatile and flexible modular formwork system for all applications in structural and civil engineering. It is used in residential construction,
More informationStarTec / AluStar Technical Instruction Manual. Certificate of approval for AluStar, issued by GSV (German concrete formwork association)
StarTec / AluStar Technical Instruction Manual Certificate of approval for AluStar, issued by GSV (German concrete formwork association) Product features StarTec The StarTec wall formwork is a frame formwork
More informationTRITEC light Steel Panel Formwork
TRITEC light Steel Panel Formwork Perfection made in Germany Various practical illustrations of TRITEC Panel Combinations Guaranteed the largest possible range of sizes with the least possible amount of
More informationUSER S Manual. HAKI Bridge System (HBS)
USER S Manual HAKI Bridge System (HBS) HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationmodular scaffolding R+
modular scaffolding R+ 1. Stand 6. Transverse U-transom Stand is the main element of modular scaffolding. Made of 48.2x3.2 mm steel pipe. Every 0,5m on the whole stand length are installed steel plates
More informationLadders and scaffold systems
Ladders and scaffold systems Customised-solutions for railway vehicles For each application the right solution! www.krause-systems.com Introduction Business Portrait KRAUSE-Werk GmbH & Co. KG For more
More informationALBLItZ 70 S INSTRUCTION FOR ERECTION AND USE
ALBLItZ 70 S INSTRUCTION FOR ERECTION AND USE Approval No. Z-8.1-864 Standard Version (as of ) C O N T E N T S 1. General...1 2. Erecting the scaffold...3 2.1 General requirements...3 2.2 Erecting the
More informationIndustrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ERECTION MANUAL HORIZONTAL BRACE 1.8m (2040) 2.7m (2041) REVISED EDITION TOE BOARD 1.8m (2065) 2.7m (2067) LADDERSPAN TRAP PLATFORM
More informationCusters. Camino CHIMNEY SCAFFOLDING ASSEMBLY AND USER S INSTRUCTIONS. Nov. 2003
ASSEMBLY AND USER S INSTRUCTIONS Custers Camino CHIMNEY SCAFFOLDING 9505.903.001 ENG / (9505.202.015/016) Nov. 2003 CUSTERS HYDRAULICA B.V. Smakterweg 33, 5804 AE VENRAY NL Telephone : +31 (0) 478 55 30
More informationMultidirectional_scaffolding MP
Multidirectional_scaffolding MP 162 Company Projects Products Scaffoldings and Coverings MP MULTIDIRECTIONAL SCAFFOLDING The MP multidirectional system is the modern solution that reflects in an industrialized
More informationUSER S MANUAL HAKI PUBLIC ACCESS STAIR
USER S MANUAL HAKI PUBLIC ACCESS STAIR HAKI AB 2017 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationAluFix Technical Instruction Manual
AluFix Technical Instruction Manual Product Features AluFix is a versatile and flexible modular formwork system for all applications in structural and civil engineering. It is used in residential construction,
More informationMammut Technical Instruction Manual
Mammut Technical Instruction Manual Product features Mammut is a crane-dependent frame formwork system and ideally suited for use in industrial engineering as well as administration and housing projcets.
More informationIndustrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ERECTION MANUAL TO BS-EN 1004-2004 Using 2 rung frames (Recommended) Using guardrail frames HORIZONTAL BRACE 1.8m (2040) 2.7m (2041)
More informationA.R.E.S. Scaffolding. Steel Scaffolding Aluminum Scaffolding Scaffolding on Hire. "Commitment to Excellence"
Aluminum Scaffolding Scaffolding on Hire A.R.E.S. Scaffolding Group Companies :- Analog General Trading LLC, Dubai (www.analoggulf.com) A. R. Engineering Services, India (www.arenggservices.com) Phone
More informationASSEMBLY.
ASSEMBLY www.proscaf.com ASSEMBLY SECTION Points to Consider These assembly instructions are generic and may not apply to all applications. If you have questions regarding specific applications contact
More informationFormwork Direct International. Tel: Heavy Duty Panel System
Formwork Direct International Tel: 0151 532 0179 sales@formworkdirect.co.uk www.formworkdirect.co.uk Heavy Duty Panel System Product Overview The FD Max panel is a heavy duty wall formwork system capable
More informationCOMPONENT SCHEDULE SINGLE WIDTH SPAN TOWERS WITH LADDER FRAMES TO BSEN RUNG STARTER FRAMES
COMPONENT SCHEDULE SINGLE WIDTH SPAN TOWERS WITH LADDER S TO BSEN 1004-2004 STARTER S PLATFORM HEIGHT METRIC 2.4 2.9 3.4 3.9 4.4 4.9 5.4 5.9 6.4 6.9 7.4 7.9 DESCRIPTION IMPERIAL 7 10 9 6 11 2 12 10 14
More informationIndustrial Aluminium Towers
HORIZONTAL 1.8m (2040) 2.7m (2041) TOE BOARD 1.8m (2066) 2.7m (2068) Industrial Aluminium Towers DOUBLE WIDTH SPAN & VERTICAL ASSEMBLY GUIDE TO BS-EN 1004-2004 Using the 3T (Through the Trap ) Assembly
More informationLEWIS Miniscaff Folding Tower Assembly Guide
LEWIS Miniscaff Folding Tower Assembly Guide This document is a complete guide for the LEWIS Miniscaff Towers The user should read the entire contents of this document before commencing assembly and pay
More informationBoSS Climalite Camera and lighting tower
Contents Safety First Safety First Quantity Schedules Toeboard 2 9 13 33 INTRODUCTION Please read this guide carefully. Please note that diagrams are for illustrative purposes only. User guides are also
More informationAllround Scaffolding. Layher Allround Bridging System Instructions for Assembly and Use. Modular truss system for wide spans
Layher Allround Bridging System Instructions for Assembly and Use Modular truss system for wide spans Certification according to DIN ISO 9001/EN 29 001 by TÜV-CERT Allround Scaffolding } CONTENT 1. Introduction...3
More informationHeavy-Duty Braces Triplex Assembly and Operating Instructions
Heavy-Duty Braces Triplex Assembly and Operating Instructions Product features and use How to read this manual Triplex is a heavy duty brace (three chords) to align and brace formwork with heights exceeding
More informationImperial. folds. Wall braces are attached to the multifunction. guard-railing post. Formworkprop. connectors and flange screws.
Wall all braces / Working scaffolds folds Wall braces are attached to the multifunction profiles by formwork-prop connectors and flange screws. guard-railing post brace frame 250 consists of push-pull
More informationFolding Platform FB Platform System. Instructions for Assembly and Use Standard Configuration
Platform System Edition 03 2015 Content Introduction Overview, Main Components 1 Key 4 Intended Use 5 Instructions for Use 5 General Safety Instructions 6 System-Specific Safety Instructions 7 Storage
More informationSAFE WORK PROCEDURE LOCATION OF WORK: WRITTEN BY: APPROVED BY: DATE: LAST REVISION: Leon Prevost Brent Vandenbosch
Page 1 of 6 LOCATION OF WORK: WRITTEN BY: APPROVED BY: DATE: LAST REVISION: All Schools L. Carriere Lorne Turner Leon Prevost Brent Vandenbosch June 12, 2013 July 7, 2017 HAZARDS PRESENT Pinch points Falling
More informationA.R.E.S. Scaffolding. Steel Scaffolding Aluminum Scaffolding Scaffolding on Hire
Steel Scaffolding Aluminum Scaffolding Scaffolding on Hire A.R.E.S. Scaffolding Group Companies :- Analog General Trading LLC, Dubai (www.analoggulf.com) A. R. Engineering Services, India (www.arenggservices.com)
More informationBRIO Modular scaffolding
BRIO Modular scaffolding // Versatile and multifunctional // Table of content Features Benefits Solutions Basic components 2 4 6 13 // Features BRIO Modular Scaffolding covers the different configurations
More informationWINSAFE Corp. OPERATING INSTRUCTIONS SUPERMOD MODULAR PLATFORMS CUSTOM LARGE AREA PLATFORMS SUPER DECK MODULAR PLATFORMS BOILERMOD MODULAR PLATFORMS
WINSAFE Corp. OPERATING INSTRUCTIONS SUPERMOD MODULAR PLATFORMS CUSTOM LARGE AREA PLATFORMS SUPER DECK MODULAR PLATFORMS BOILERMOD MODULAR PLATFORMS THESE INSTRUCTIONS MUST BE READ AND UNDERSTOOD BY ANYONE
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Frame Scaffolding Towers Rolling & Stationary 5, 10, 15 and 20 High READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This
More informationMevaFlex Assembly and Operating Instructions
Assembly and Operating Instructions is a slab formwork which is not restricted by modular dimensions and therefore doesn't dictate to any rules of a modular system. Due to the versatility of the system,
More informationINDEX. introduction 4. access scaffolding 5. selflock system 16. wall system 17. column boxes 29. slab system 31. props 36. contact details 40
PRODUCT BROCHURE INDEX introduction 4 access scaffolding 5 selflock system 16 wall system 17 column boxes 29 slab system 31 props 36 contact details 40 INTRODUCTION Augusta Manufacturing was established
More informationAlisply Circular Headquarters - Spain Alsina USA - Chicago Alsina USA - Miami
Alisply Circular Headquarters - Spain Encofrados J. Alsina, S.A. Camí de la Font Freda, 1 08110 - Montcada i Reixac, Barcellona - Spain Tel. +34 935 753 000 Fax. +34 935 647 059 E-mail: alsina@alsina.es
More informationscaffoldings/ coverings
scaffoldings/ coverings 198 MDS 222 temporary covers Scaffoldings / Coverings 197 SCAFFOLDINGS / COVERINGS MDS MDS multidirectional scaffolding The MDS multidirectional scaffolding is the modern solution
More informationPERI UP Easy * The lightweight and fast frame scaffold for safe working on facades
PERI UP Easy * The lightweight and fast frame scaffold for safe working on facades Product Brochure * If approval is required for the scaffolding system PERI UP Easy to be placed on the market in a country,
More informationSince it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one
access scaffolding Since it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one of the major players in the scaffolding and formwork industry in South
More informationLayher. Aluminium Rolling Towers. Layher SuperKlaxTower. Instructions for Assembly and Use
Mobile access and working towers in accordance with: HD 1004; DIN 4422, Part 1 (Version 8/92) Working platform 2.8 x 2.8 m and 2.8 x 1.95 m Max. working height: in closed rooms 13.95 m, outdoors 10.0 m
More informationPERI PD 8 The cost-effective shoring for slab tables and high loads
PERI PD 8 The cost-effective shoring for slab tables and high loads Edition 06/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax +49 (0)7309.951-0
More informationUSER S MANUAL HAKI CONTINENTAL
USER S MANUAL HAKI CONTINENTAL HAKI AB 2003 HAKI User s Manual and product liability applies only to scaffolding containing components manufactured and supplied by HAKI. Building scaffolding using components
More informationUSER S MANUAL HAKI UNIVERSAL ALUMINIUM
USER S MANU HAKI UNIVERS UMINIUM HAKI AB 2005 Important information HAKI s product liability and erection instructions apply only to scaffolds that are entirely composed of components that have been made
More informationSafety Ladders: Made of Aluminium
Y-Spar Anodized aluminium alloy ladder. Guide-rail profile: 52 x 51 mm. Comes with joint plate. Mounting brackets extra to order. Mounting distance: recommended 1400 mm - max. 1680 mm. Installation of
More informationIndustrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ASSEMBLY GUIDE TO BS-EN 1004-2004 Using 2 rung frames (Recommended) Using Guardrail frames HORIZONTAL BRACE 1.8m (2040) 2.7m (2041)
More informationThis User Guide provides you with step by step instructions to ensure your system is erected easily and safely.
INTRODUCTION Please read this guide carefully. Please note that diagrams are for illustrative purposes only. Trade King 730 mobile aluminium towers are light-weight scaffold towers used throughout the
More informationBRIO Modular scaffolding
BRIO Modular scaffolding // Versatile and multifunctional // Table of content Features Benefits Solutions Basic components 2 4 6 13 // Features BRIO Modular Scaffolding covers the different configurations
More informationLAYHER ACCESS TECHNOLOGY CATALOGUE
LAYHER ACCESS TECHNOLOGY CATALOGUE Edition 04.2018 Ref. No. 8118.229 Quality management certified according to ISO 9001:2008 ROLLING TOWERS FROM PAGE 34 ALU BRIDGING BEAM FROM PAGE 24 NOTICE All dimensions
More informationUSER S MANUAL HAKI UNIVERSAL
USER S MANUAL HAKI UNIVERSAL Suspended scaffolding HAKI AB 2012 Important information HAKI s product liability and erection instructions apply only to scaffolds that are entirely composed of components
More informationRosette Modular Scaffolding System
Rosette Modular Scaffolding System The rosette modular security scaffolding system to be used in facades, has been produced in accordance with the structural design conditions stated by the following applicable
More informationPROFESSIONAL ROLLING TOWER SYSTEMS
Relax. It s an Altrex. ROLLING TOWER SYSTEMS Rolling tower Folding frame Relax. It s an Altrex. Working at height has several risks. Choosing Altrex is choosing safety, quality and durability. Altrex access
More informationTEMPORARY EDGE PROTECTION SYSTEM DESCRIPTION CTS. Combisafe International AB
TEMPORARY EDGE PROTECTION SYSTEM DESCRIPTION CTS Combisafe International AB CTS Combisafe International AB Contents Safety instructions... 3 Important... 4 General... 4 Data... 5 Safety posts 4140/4145/4150...
More informationALUMINUM SCAFFOLDING
ALUMINUM SCAFFOLDING WARNING: IMPORTANT SAFETY RULES Do not permit anyone to use scaffolds unless he has read and is familiar with these important safety rules. SPECIAL PRECAUTIONS 1. Lock all caster brakes
More informationRolling Towers. Layher Uni Light Tower Instructions for Assembly and Use. Mobile working platforms according to DIN EN 1004:
Instructions for ssembly and Use Mobile working platforms according to DIN EN 00:00-03 Working platform 0.7 x.8 m max. working height: indoors.3 m outdoors.3 m Rolling Towers Load bearing capacity.0 kn/m
More informationInstruction Manual Span Scaffolds! W A R N I N G! Before using Instant UpRight Scaffolds, read, understand and follow all Safety Rules, Erection Instructions and Maintenance Rules. Keep this manual for
More informationInstruction Manual Span Scaffolds
Instruction Manual Span Scaffolds QUALITY & STRENGTH YOU CAN TRUST! W A R N I N G! Before using Instant UpRight Scaffolds, read, understand and follow all Safety Rules, Erection Instructions and Maintenance
More informationEdition Ref. No Quality management certified according to ISO 9001:2008 by German TÜV-CERT
LAYHER Allround Scaffolding Safety in Industrial Applications // Layher Allround Scaffolding O-Version Edition 05.2013 Ref. No. 8116.241 Quality management certified according to ISO 9001:2008 by German
More informationUSER S MANUAL HAKI PUBLIC ACCESS STAIR
USER S MANUAL HAKI PUBLIC ACCESS STAIR HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationEdition Ref. No Quality management certified according to ISO 9001:2008 by German TÜV-CERT
LAYHER Allround Scaffolding Safety in Industrial Applications // Layher Allround Scaffolding U-Version Edition 05.2013 Ref. No. 8116.240 Quality management certified according to ISO 9001:2008 by German
More informationMOBILE SCAFFOLDINGS MP-126 MP-102 MP-127 MP-103
3 MP-126 Supporting frame: 2.00 x 1.50 m Weight: 13.25 kg Vertical supporting aluminium frame 1.50 m wide and 2.00 m high for attachment of platform and braces. Antislip rungs of finned surface provide
More informationLADDERSPAN AGR. BoSS Camlock Advance Guardrail Mobile Aluminium Tower 1450/850 Frames USER GUIDE
LADDERSPAN AGR BoSS Camlock Advance Guardrail Mobile Aluminium Tower 1450/850 Frames USER GUIDE Contents Safety First Safety Checklist Quantity Schedules Assembly and Dismantling Procedure Toe Boards Stabilisers
More informationAllround Scaffolding System
Quality management certified according to ISO 9001:2008 by German TÜV-CERT L i m i t l e s s. S t r o n g. 8116.221 I n g e n i o u s. Catalogue Edition 01.04.2012 Allround Scaffolding System Layher Allround
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Multifunction Rolling Scaffold Towers 6, 12 and 18 READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
More informationMobile Tower 3T Method (Through The Trapdoor) Please read this guide carefully. Please note that diagrams are for illustrative purposes only.
Mobile Tower 3T Method (Through The Trapdoor) INTRODUCTION Please read this guide carefully. Please note that diagrams are for illustrative purposes only. LOYAL mobile aluminium towers are light-weight
More informationQUICK ALLY SCAFFOLD SPECIFICATIONS Standards: 1.0 m, 1.5 m, 2.0 m, 2.5 m, 3.0 m, 4.0 m. Ledgers: 0.5 m, 0.7 m, 1.2 m, 1.8 m, 2.4 m, 3.0 m. Polypropylene platforms: 0.7 m, 1.2 m, 1.8 m, 2.4 m, 3.0 m. Also
More informationSpeedyScaf System. Layher SpeedyScaf System. Catalogue Edition Quality management certified according to ISO 9001:2008 by German TÜV-CERT
C o m p l e t e. Quality management certified according to ISO 9001:2008 by German TÜV-CERT S a f e. 8102.253 Q u i c k. Catalogue Edition 01.04.2012 SpeedyScaf System Layher SpeedyScaf System u Contents
More informationErection manual. Tube-Lock Concept. van Thiel United b.v Page: 1 of 15
Erection manual Tube-Lock Concept 2013-02 Page: 1 of 15 Contents Subject Page Illustration of Tube-Lock Concept 3 Parts of Tube-Lock concept 4 Legislation 5 Erecting a Tube-Lock Concept scaffold 6 Technical
More informationAssembly Instructions
MULTI-FUNCTIONAL SCAFFOLD UNIT + STABILIZER LEGS 1. SCAFFOLD 2. LADDER 3.TRESTLE 2 1 3 Assembly Instructions CODE: 126431 Parts List Specifications: - Width: 1.2m - Length: 1.6m - Scaffold Height: 3.4m
More informationLAYHER EVENT SYSTEMS CATALOGUE
LAYHER EVENT SYSTEMS CATALOGUE Edition 04.2015 Ref. No. 8111.227 Quality management certified according to ISO 9001:2008 by German TÜV-CERT Layher QUALITY MADE BY LAYHER Headquarters in Eibensbach Plant
More informationLAYHER SPEEDYSCAF SYSTEM CATALOGUE
LAYHER SPEEDYSCAF SYSTEM CATALOGUE Edition 04.2013 8102.254 Quality management certified according to ISO 9001:2008 by German TÜV-CERT Layher QUALITY MADE BY LAYHER // Main plant in Eibensbach // Plant
More informationSOLO 700. One Man Aluminium Tower 3T - Through the Trapdoor Method USER GUIDE
SOLO 700 One Man Aluminium Tower 3T - Through the Trapdoor Method USER GUIDE Contents Safety First Component Diagram Quantity Schedules Stabilisers Build Method 2 7 9 10 11 1 BoSS SOLO 700 User Guide Safety
More informationCOLD DEFORMATION: A STRONGER ALTERNATIVE
COLD DEFORMATION: A STRONGER ALTERNATIVE LOAD TEST: ALUFASE Vs WELDING Load (Tons) / Deformation (mm) 7 6 The cold deformation system has been proven to be 3 times stronger than the traditional welding
More informationNOEtop. Imperial THE FORMWORK
NOEtop Imperial THE FORMWORK NOEtop simply more Versatile in use Integrated bracing allows NOEtop to be used as beam formwork (without external strongbacks etc.). Freely selectable tie rod layout Symmetrical
More informationMini-Max Access Tower System Data-Sheets
Date: Jan 2012 Page 1 Mini-Max Access Tower System Data-Sheets ISSUE: D DATE: Jan 2012 Youngman Group Ltd Page 1 of 26 MINI-MAX DATA SHEET CONTENTS Date: Jan 2012 Page 2 Description Page No ------------------------------------------------
More informationUSER S MANUAL. HAKI Loading Tower
USER S MANUAL HAKI Loading Tower HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made and
More informationUSER S MANUAL HAKI COMPACT STAIR TOWER
USER S MANUAL HAKI COMPACT STAIR TOWER HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationSpan 300 Manual. DESIGNATION EN1004 CEN 1298 IM - en. CEN designation of this instruction manual EN 1298 IM en
Span 300 Manual DESIGNATION EN1004 CEN 1298 IM - en CEN designation of this instruction manual EN 1298 IM en WARNING NEVER STAND ON AN UNGUARDED PLATFORM SAFE WORKING LOADS AND WORKING HEIGHTS The safe
More informationSAFESTAND Ltd. SafeStand Training Guide
SAFESTAND Ltd SafeStand Training Guide 1 CONTENTS SafeStand Components Page 4 Before Commencing Page 5 Erection Guide Page 6 Inspection Page 20 Dismantling Guide Page 21 SafeStand Gate Page 30 SafeStand
More informationDOMINO Panel formwork. Assembly Instructions for Standard Application
DOMINO Panel formwork Assembly Instructions for Standard Application Edition 09/2007 Contents Page Overview 1 Introduction 2 Product features 2 Intended use 2 Safety instructions 3 B7 B8 Page Extensions
More information