MAXIMA. Maxima Testing Data, Section Properties, and Load Tables

Size: px

Start display at page:

Download "MAXIMA. Maxima Testing Data, Section Properties, and Load Tables"

Kelley Cole
5 years ago
Views:

MAXIMA Maxima Maxima Testing Data, Section Properties, and Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit www.mcelroymetal.com.

3 MAXIMA Maxima Maxima Testing Data, Section Properties, and Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit For additional information, please contact the McElroy Engineering Department at Maxima Panel Availabilty WIDT PAN CONDITIONS FACTORYNOTCING SEAM DOUBLE PENCIL RIB SINGLE PENCIL RIB WIDT IN INCES 90 DEGREE SEAM 180 DEGREE SEAM MINOR RIBS STRIATED CURVED FLAT PAN MAXIMA PROFILES LAP EAVE NONE MAXIMA1.5 SOWN AS STRIATED 12 MAXIMA1.5 SOWN AS STRIATED 16, 18 MAXIMA SOWN AS FLAT PAN (OPT.) 12 MAXIMA SOWN AS BEAD (PENCIL) RIB (OPT.) 16, 18 MAXIMA ADV SOWN AS STRIATED 12 MAXIMA ADV SOWN AS STRIATED MAXIMA SOWN AS MINOR RIB (STD.) 18, 24 1 MAXIMA & CAN BE FACTORY NOTCED AT EITER TE LAP END OR TE EAVE END, BUT NOT BOT ENDS OF TE PANEL. MAXIMA ADV IS ALSO AVAILABLE WITOUT SOULDERS.

4 MAXIMA Maxima Seaming Details Maxima Before Mechanical Seaming Maxima 90 Fold Maxima 1.5 Before Mechanical Seaming Maxima Fold Maxima ADV Before Mechanical Seaming Details: Maxima ADV 180 Fold - Mechanically seamed profile - Factory applied sealant (on non-curved panels only) - Factory formed eave notch upon request - Minimum slope: 1:12 for Minimum slope: 1/2:12 for - Minimum slope: 1/4:12 for - Can be installed over solid deck or open framing - Maxima and ADV also available jobsite formed for long lengths - Floating clips allow for 3 1/8 thermal movement - Oil canning is a natural occurrence in metal panels and is not a cause for panel rejection. Maxima ADV Without Shoulders Before Mechanical Seaming Maxima ADV Without Shoulders 180 Fold Panel Options: - Seam height: 1.5, & - Maxima: 90 degree seam - Maxima 1.5 and ADV: 180 degree seam - Panel width:, 1, 18, and 2 - Panel configurations: Maxima, Maxima 1.5 and ADV: flat, striated, pencil ribs, minor ribs ( only) Maxima 1.5 and ADV: curved - Coating: - Kynar 500 (PVDF) - Substrate: - Standard 24 GA Galvalume - Optional 22 GA Galvalume - Optional.032 and.040 aluminum No testing available on aluminum - Maxima aluminum is produced in Sunnyvale, TX 2 Notes: - Customers can rent mechanical seaming equipment directly from Developmenta Industries (DI). DI is the only McElroy approved seamer supplier. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at

5 1.5 Maxima Eave Trim MLSE 2 1/8 MAXIMA 1.5 COMMERCIAL / INDUSTRIAL APPLICATIONS Sculptured Eave Trim MX / Valley Trim MXVF 3 1/8 1 3/ 1 3/ 1 1 Rake Trim MXRT Rake Tie-In Trim MXEW Rake Slide MLRS 3/ 2 3/8 1 3/ Rake End Cap ML-RE 9 3/1 26 Ga. igh Eave Trim MLS4 3 3/ 1 3/ 5 7/8 3/ 1.5 Zee Flashing MX1ZF Fixed igh Tie-In MXSW 1 1/ igh Eave Trim MLS / Floating igh Tie-In MXFSW 1 3/ 5 3/ ip Flashing MXF Floating ip Trim MXFF 5 3/ 5 3/ Fixed Ridge Trim MFXR / 3 specify roof pitch Indicates an open hem - All other hems are closed.

6 1.5 MAXIMA Floating Ridge Trim MFLR1 1 3/ MAXIMA 1.5 COMMERCIAL / INDUSTRIAL APPLICATIONS Fixed Peak Box MLFXPB1 1ʼ - Fixed Peak Box MLFXPB4h 1ʼ - 8 3/ 9 3/1 9 3/ 1ʼ - 1ʼ - Floating Peak Box MLFLPB1h Floating Peak Box MLFLPB4 Cinch Angle ML-CA 1ʼ - 2 7/1 2ʼ - 1ʼ -43/ 2ʼ - 2ʼ - 2ʼ - 26 Ga. Gutter Corner Box for Sculptured Eave MLSCB1 3 1/ i- Corner Box MLLCB 5 Outside Corner Box for Standard Gutter MLGCB1 26 Ga. (Right and Shown Left and Opposite) 26 Ga. 26 Ga. (Right and Shown (Right and Shown Left and Opposite) Left and Opposite) 1.5 Maxima Gutter MX1G1 1.5 Maxima Gutter MX1G4 Gutter Strap ML-GS 4 Snow guards required to prevent damage caused by sliding snow. specify roof pitch 7/8 7 5 Snow guards required to prevent damage caused by sliding snow. 7 7/8 3/ 3/ Indicates an open hem - All other hems are closed.

7 1.5 Maxima MAXIMA 1.5 COMMERCIAL / INDUSTRIAL APPLICATIONS Gutter End Cap MX2GEC2 4 7/1 Gutter End Cap Over 2:12 TO 4:12 Pitch MX2GEC4 4 Downspout BBPDS /1 7 1/1 7 3/8 4 11/1 3 15/1 14ʼ 26 Ga. 26 Ga. Aluminum Downspout Outlet Box BBPOUT Downspout Strap BBPDSS ʼ- x Downspout Elbow A-Style BBPELA Lock-Seam Downspout - Corner (Right and Corner Shown) Lock-Seam Downspout - Center Please specify left or right hand corner Lock-Seam Downspout Outlet - Standard 5 7/8 Lock-Seam Downspout Strap 4 1/ Notes: 5

8 & ADV Eave Trim MLSE 2 1/8 3 1/8 Rake Trim MXRT 1 3/ Rake End Cap ML-RE MAXIMA & ADV COMMERCIAL / INDUSTRIAL APPLICATIONS 1 3/ Sculptured Eave Trim to 4:12 pitch MX2SCE4 1 3/ Rake Tie-In Trim MXEW 2 3/8 Zee Flashing MX2ZF 1 1/ 2 3/ Valley Flashing MXVF Rake Slide MLRS 1 3/ igh Eave Trim MLS /1 1 7/8 26 Ga. 3/ 1 3/ igh Eave Trim MLS4 3 3/ 1 3/ 5 7/8 Fixed igh Tie-In MXSW Floating igh Tie-In MXFSW 1 3/ 5 3/ ip Trim MXF Floating ip Trim MXFF 5 3/ 5 3/ Fixed Ridge Trim MFXR / 6 specify roof pitch Indicates an open hem - All other hems are closed.

9 & ADV Floating Ridge Trim MFLR1 1 3/ 8 3/ Floating Peak Box MLFLPB1h MAXIMA & ADV COMMERCIAL / INDUSTRIAL APPLICATIONS Fixed Peak Box MLFXPB1 9 3/1 1ʼ - Floating Peak Box MLFLPB4 1ʼ - Fixed Peak Box MLFXPB4h 1ʼ - 9 3/ Cinch Angle ML-CA 1ʼ - 1ʼ - 2 7/1 2ʼ - 1ʼ - 2ʼ - 2ʼ - 2ʼ - Gutter Corner Box for Sculptured Eave MLSCB1 3 1/ i- Corner Box MLLCB 5 Outside Corner Box for Standard Gutter MLGCB1 26 Ga. (Right and Shown Left and Opposite) 26 Ga. 26 Ga. (Right and Shown (Right and Shown Left and Opposite) Left and Opposite) Maxima Gutter MX2G1 Maxima Gutter MX2G4 Gutter Strap ML-GS 7/8 7 1/ /8 3/ 3/ 7 Snow guards required to prevent damage caused by sliding snow. specify roof pitch Snow guards required to prevent damage caused by sliding snow. Indicates an open hem - All other hems are closed.

10 & ADV Gutter End Cap - Maxima MX2GEC2 4 7/1 MAXIMA & ADV COMMERCIAL / INDUSTRIAL APPLICATIONS Gutter End Cap Over 2:12 TO 4:12 Pitch MX2GEC4 4 Downspout BBPDS /1 4 11/1 7 1/1 3 15/1 7 3/8 14ʼ 26 Ga. 26 Ga. Aluminum Downspout Outlet Box BBPOUT Downspout Strap BBPDSS ʼ- x Downspout Elbow A-Style BBPELA Lock-Seam Downspout - Corner (Right and Corner Shown) Lock-Seam Downspout - Center Lock-Seam Downspout Outlet - Standard 5 7/8 Please specify left or right hand corner Lock-Seam Downspout Strap 4 1/ Notes: 8 specify roof pitch

11 Maxima Eave Trim MLSE 3 1/8 Rake Trim MXRT 2 1/8 1 3/ MAXIMA COMMERCIAL / INDUSTRIAL APPLICATIONS Sculptured Eave Trim to 4:12 pitch MLSCE / Rake Tie-In Trim MXEW 1 Valley Flashing MXVF Rake Slide MLRS 1 3/ 1 1 3/ 2 3/8 Rake End Cap ML-RE Zee Flashing MX3ZF 1 1/8 igh Eave Trim MLS /1 2 7/8 26 Ga. 3/ 1 3/ igh Eave Trim MLS4 5 7/8 3 3/ 1 3/ Fixed igh Tie-In MXSW Floating igh Tie-In MXFSW 1 3/ 5 3/ ip Flashing MXF Floating ip Flashing MXFF 5 3/ 5 3/ Fixed Ridge Flashing MFXR / 9 specify roof pitch Indicates an open hem - All other hems are closed.

12 MAXIMA Floating Ridge Flashing MFLR1 1 3/ 8 3/ MAXIMA COMMERCIAL / INDUSTRIAL APPLICATIONS Fixed Peak Box MLFXPB1 9 3/1 1ʼ - Fixed Peak Box MLFXPB4h 9 3/ 1ʼ - 1ʼ - 1ʼ - Floating Peak Box MLFLPB1h Floating Peak Box MLFLPB4 Cinch Angle ML-CA 2ʼ - 2ʼ - 1ʼ - 2 7/1 1ʼ - 2ʼ - 2ʼ - Gutter Corner Box for Sculptured Eave MLSCB1 3 1/ i- Corner Box MLLCB 5 Outside Corner Box for Standard Gutter MLGCB1 26 Ga. (Right and Shown Left and Opposite) 26 Ga. 26 Ga. (Right and Shown (Right and Shown Left and Opposite) Left and Opposite) Maxima Gutter MLG1 Maxima Gutter MLG4 Gutter Strap ML-GS 7/8 5 1/ 1 1/ 3/ 6 1/8 6 1/8 3/ 10 Snow guards required to prevent damage caused by sliding snow. specify roof pitch Snow guards required to prevent damage caused by sliding snow. Indicates an open hem - All other hems are closed.

13 Maxima Gutter End Cap MLGEC1 1 9/1 4 11/1 MAXIMA COMMERCIAL / INDUSTRIAL APPLICATIONS Gutter End Cap Over 2:12 TO 4:12 Pitch MLGEC4 2 3/1 5 5/1 Downspout BBPDS 6 1/1 6 1/1 14ʼ 26 Ga. 26 Ga. Aluminum Downspout Outlet Box BBPOUT Downspout Strap BBPDSS ʼ- x Downspout Elbow A-Style BBPELA Lock-Seam Downspout - Corner (Right and Corner Shown) Lock-Seam Downspout - Center Please specify left or right hand corner Lock-Seam Downspout Outlet - Standard 5 7/8 Lock-Seam Downspout Strap 4 1/ Notes: 11 specify roof pitch

14 1.5 Maxima Arch Eave Trim MXASE 4 3/8 Arch Valley Trim MXAVT Arch Rake Trim MXART 1.5 Arch Zee Flashing MX1ZF 1 1/ Arch ip Trim MXAF /8 MAXIMA 1.5 ARCITECTURAL APPLICATIONS 5 1/ Eave Drip/Rake Trim MXADE35 5 1/8 Arch Offset Cleat MXAOF / Arch Rake Tie-In Trim MXAEW 13/1 Arch Angle Trim MXAAT Arch igh Eave Trim MXAS / 3/8 Eave Drip/Rake Trim MXADE15 5 Arch Perimeter Cleat MXAPC 1 3/ Arch Utility Offset Cleat MXUOF / 3/ 1 3 Arch Ridge Trim MXARF 15 Arch igh Tie-In Trim MXASW 6 3/8 6 3/8 3/1 10ʼ 6 3/8 6 3/ / Arch Face Mounted Gutter MXAFMG Snow guards required to prevent damage caused by sliding snow. specify roof pitch 6 Arch Flanged Gutter MXAFLG 5 5 Snow guards required to prevent damage caused by sliding snow. Arch Gutter Strap MXAGS 10 0ʼ - 10 Indicates an open hem - All other hems are closed.

15 1.5 Maxima MAXIMA 1.5 ARCITECTURAL APPLICATIONS Arch Gutter End Cap MXAGEC 4 7/8 Aluminum Downspout Outlet Box BBPOUT Downspout BBPPS 4 15/1 26 Ga. (Left and Shown Right and Opposite) Downspout Strap BBPDSS 10 x Downspout Elbow A-Style BBPELA ʼ ʼ - TRIM & ADV Arch Eave Trim MXASE MAXIMA & ADV ARCITECTURAL APPLICATIONS 4 3/8 Eave Drip/Rake Trim MXADE35 5 1/8 Eave Drip/Rake Trim MXADE / 13 Arch Valley Trim MXAVT specify roof pitch 9 9 Arch Rake Trim MXART 5 1/8 5 1/ Arch Offset Cleat MXAOF Arch Rake Tie-In Trim MXAEW / 13/1 1 3/ Arch Utility Offset Cleat MXUOF 27 3/ / Arch Perimeter Cleat MXAPC 3/ 1 3/1 10ʼ Indicates an open hem - All other hems are closed. 15

16 & ADV Arch Zee Trim MX2ZF MAXIMA & ADV ARCITECTURAL APPLICATIONS 1 1/ Arch Angle Trim MXAAT Arch Ridge Trim MXARF 6 3/8 6 3/8 1 7/8 Arch ip Trim MXAF 6 3/8 6 3/8 Arch Gutter End Cap MXAGEC 4 7/8 Arch igh Trim MXAS 5 1/ Arch igh Tie-In Trim MXASW Ridge Flashing (Cor-A-Vent) Spacer Trim (Cor-A-Vent) Diverter Trim (Cor-A-Vent) 7 1/ 3/ 5 Snow guards required to prevent damage caused by sliding snow. x Downspout Elbow A-Style BBPELA 6 1 3/ 5 24 Ga. 24 Ga. 24 Ga. Arch Face Mounted Gutter Arch Flanged Gutter Arch Gutter Strap MXAFMG MXAFLG 5 MXAGS Snow guards required to prevent damage caused by sliding snow. 6 Downspout BBPPS ʼ / ʼ 26 Ga. (Left and Shown Right and Opposite) 8.5 Aluminum Downspout Outlet Box BBPOUT Downspout Strap BBPDSS specify roof pitch 10 14ʼ - Indicates an open hem - All other hems are closed.

17 ACCESSORIES MAXIMA Maxima 1.5 Low Floating Clip Item #: /8 2:16 and 2:18 Utility Fixed Clip Item #: :16 and 2:18 Low Fixed Clip Item #: /8 7/8 4 1/ 22 Ga. 7/8 3/3/ 3 1/ 22 Ga. 7/8 7/8 3/3/ 3 1/ 22 Ga. 2:16 and 2:18 igh Fixed Clip Item #: :16 and 2:18 Low Floating Clip Item #: /8 2:16 and 2:18 igh Floating Clip Item #: /8 3/3/ 7/8 3 1/ 22 Ga. 4 1/ 22 Ga. 4 1/ 22 Ga. 3:24 Utility Fixed Clip Item #: :24 Low Fixed Clip Item #: :24 igh Fixed Clip Item #: /8 7/8 7/8 3/3/ 3 1/ 7/8 7/8 3/3/ 7/8 3 1/ 7/8 3/3/ 3 1/ 22 Ga. 22 Ga. 22 Ga. 3:24 Low Floating Clip Item #: :24 igh Floating Clip Item #: Utility Eave Plate Item #: /8 15/1 1/8 4 1/ 22 Ga. 4 1/ 22 Ga. 16 Ga. Low Eave Plate Item #: /1 igh Eave Plate Item #: /1 Bearing Plate Item #: Galvanized Item #: Primed 5 3/8 1 3/ 16 Ga. 16 Ga. 2 3/1 2 3/1 16 Ga. Back- Plate 1 Item #: Item #: Item #: igh Floating Rake Plate Item #: /1 Low Floating Rake Plate Item #: /1 1ʼ 0 CTRʼS (TYP.) 1ʼ 0 CTRʼS (TYP.) Ga. 1 3/ 3/8 14 Ga. 14 Ga. Images not drawn to scale.

18 ACCESSORIES Maxima 1.5 Rake Support Angle Red Primed Low Floating x 10ʼ Item #: MAXIMA Maxima / ADV Rake Support Angle Red Primed Low Floating x 10ʼ Item #: Maxima / ADV Rake Support Angle Red Primed igh Floating x 10ʼ Item #: /8 3 1/8 1ʼ 0 O.C. 2 3/8 1ʼ 0 O.C /1 1ʼ 0 O.C. Maxima Rake Support Angle Red Primed igh Floating x 10ʼ Item #: Maxima Outside Universal Closure 1 (Part # varies by color) Maxima Outside Universal Closure 18 (Part # varies by color) 4 1/ 1 3/ 1ʼ 0 O.C Maxima Outside Closure 2 (Part # varies by color) Cinch Strap 1 (Part # varies by color) Cinch Strap 18 (Part # varies by color) 2 3:24 Cinch Strap 2 (Part # varies by color) 4ʼ Back- Channel - Galvanized Item #: / 6ʼ Back- Channel - Galvanized Item #: / 4ʼ 6ʼ Thermal Spacer 3/8 x 14 7/8 Item #: /8 x 16 7/8 Item #: /8 x 22 7/8 Item #: Thermal Spacer x 14 7/8 Item #: x 16 7/8 Item #: Thermal Spacer x 14 7/8 Item #: x 16 7/8 Item #: x 22 7/8 Item #: VARIES VARIES VARIES 3/8 zthermal Spacer x 14 7/8 Item #: x 16 7/8 Item #: VARIES 1/4-14 x 1 1/ TEK2 Self Driller W/O Washer - Plain Item #: #14 x Type A Item #: Images not drawn to scale.

19 ACCESSORIES MAXIMA #12-24 x 1 1/ TEK 4.5 W/O Washer - Plain Item #: /4-14 x 1 1/ Shoulder TEK2 3/8 W W/O Washer - Plain Item #: /4-14 x 1 1/ TEK2 ZAC (Part # varies by color.) 1/4-14 x 7/8 LAPTEK ZAC Self Driller (Part # varies by color.) #14-10 x Type A ZAC (Part # varies by color) 43D Pop rivets (Part # varies by color) #12-13 Dekfast Phillips (Length varies by application) #10-16 x TEK2 Pancake ead Self-Driller - Plain Item #: #10-12 x Type A Pancake ead Woodgrip - Plain Item #: Touch- Paint Pen (Part # Varies by ) Sikalastomer Butyl Sealant Item #: Titebond Caulk Sealant (Part # varies by color) Butyl Double Bead Tape Sealant 3/1 x 7/8 x 40ʼ Item #: Butyl Tape Sealant 3/3 x x 45ʼ Item #: Butyl Tape Sealant 3/3 x 3/8 x 45ʼ Item #: Strip Tape 3/ x x Item #: (Used with Maxima 324 Only) 17 Images not drawn to scale.

Panel / Trim /Accessories. Corporate Office 1500 Hamilton Rd. Bossier City, LA

Panel / Trim /Accessories. Corporate Office 1500 Hamilton Rd. Bossier City, LA Panel / Trim /Accessories Corporate Office 1500 amilton Rd. Bossier City, LA 71111 www.mcelroymetal.com MAXIMA Maxima Maxima Load Tables and Section Properties Load Tables and Section Properties for Maxima