Content. PV1-F Halogen-free cable for photo-voltaic systems... G/11. PV1-F dual Halogen-free twin cable for photo-voltaic systems...

Transcription

1 Hybrid and Special Cables

2 HYBRID AND SPECIAL CABLES Content page Applications... /3 Construction examples of special cables: CAN-Bus cable... /4 Profibus-DP cable... /5 Coupling cable... /6 Interbus Hybrid cable for the automotive industry... /7 Control cable for the automotive industry... /8 C A 883 Ö Twisting and torsion connection cable... /9 Applications for halogen-free cable for photo-voltaic systems... /10 PV1-F Halogen-free cable for photo-voltaic systems... /11 PV1-F dual Halogen-free twin cable for photo-voltaic systems... /12 PV Wire Halogen-free cable for photo-voltaic systems (UL)... /13 PV1-F with UL Halogen-free cable for photo-voltaic systems (UL)... /14 NEW NEW NEW C Lift Lift control cable with sisal center as suspension unit... /15 C Lift ST Lift control cable with steel center as suspension unit... /16 H05VVH6-F PVC Flat cables... /17 H07VVH6-F PVC Flat cables... /18 NEW NEW 2 DR 717 P Highflex Reeling cable... /19 DR 718 CP Highflex Reeling cable with overall copper screen... /20 DR 721 P Reeling cable... /21 NEW DR 720 P Highflex Reeling cable... /22 Spreader 722 Control cable hoisting cages in crane systems... /23 Festoon 715 P PUR cable for flexible application in festoon systems... /24 MR 460 Control cable with numbered cores and fibre-reinforced PUR sheath... /25 NEW NEW NEW Enquiry form for special cables... /26 Harnessed cables... /27 B helix cables... /28 Constuction details for helix cables... /29 : especially for use in rail vehicles

3 HYBRID AND SPECIAL CABLES Applications n Technical problems often arise that can not be solved properly by standard cables. Being a customer of S Bröckskes, you have the right to get the best solution. Therefore, we are pleased being your specialist for special cables. No matter whether a cable of our standard range is to be modified or a completely new cable is to be constructed: we will work together with you intensively in order to realise your requests and needs. Anyway, you will profit from our variedness and flexibility, that besides our wide standard product range of cables count among the special strengths of our company. We produce nearly every type of special cable for you already with minimum quantities of 500 m, in certain dimensions already 100 m - exactly according to your individual construction demands. Please give us your requested details, such as: n conductor material n number of cores n cross sections n colours n outer diameter n flexibility n low and high temperature resistance n materials n types of screening n combined cables n technical specifications n optical waveguide n number of fibres n POF (polymeric optical fibres) n Of course, we also fulfil other parameters than the above-mentioned. Your requests are always most important and our highly motivated team will meet them applying our comprehensive know-how. By this means you will be able to improve the efficiency of your machines. n Are you interested in a special solution? You only need to note the requested parameters in the forms shown on pages /26 and /29. Or you contact directly our sales team that is supported by sales representatives in many parts of Europe. 3 n You will find further information about the safe application of cables on pages N/28-38

4 HYBRID AND SPECIAL CABLES Example: CAN-Bus cable Halogen-free combined cable with overall copper screen item no cross 2 x 2 x 0.50 mm 2 + sections 4 x 0.50 mm x 0.50 mm 2 4 Conductor: tinned copper strands, fine wires with reference to DIN VDE 0812 Insulation: A 231 thermoplastic material and 02YI1 acc. to DIN VDE 0819 part 103 (for 2 x 0.50 mm 2 ) Screen: tinned copper braid, optical coverage 85% Sheath material: A 263 thermoplastic material Marking: SAB BRÖCKSKES D-VIERSEN SO. SABIX CAN-BUS-LEITUN Peak operating voltage: max. 450 V Testing voltage: core/core 1000 V (DC) core/screen 1500 V (DC) Min. bending radius flexible application: 10 x d fixed laying: -40/+70 C flexible application: -30/+70 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Fire performance: no flame propagation acc. to IEC EN category C resp. D (see page N/20) flame retardant and self-extinguishing acc. to IEC and EN Characteristic impedance: acc. to VDE 0472 part 516 at 1 Mhz: 120 Ω ± 10% (CAN-Bus) Image attenuation acc. to VDE 0472 part 515 at 1 Mhz: constant: approx. 1.5 db/100 m (CAN-Bus) Mutual capacitance: acc. to VDE 0472 part 504 test method: approx. 15 nf/km (CAN-Bus) Oil resistance: acc. to EN section 10 and VDE 0473 part section 10 acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14

5 HYBRID AND SPECIAL CABLES Example: Profibus-DP cable Halogen-free Profibus-DP cable with ralve control for use in cable tracks item no cross 2 x 0,34 mm 2 + sections: 4 x 1,5 mm 2 Halogen-free Profibus-DP cable with seperate current supply for use in cable tracks item no cross 2 x 0,34 mm 2 + sections: 3 x 1,00 mm 2 5 Conductor: bare copper strands, fine wires Insulation : 0,34 mm 2 : cellular PE 1,00 mm 2 /1,50 mm 2 :TPE Stranding: Profibus twisted pairwise, pairs and conductors twisted in layers Screen Profibus: Sheath material: braid of tinned copper round wires PUR, TMPU acc. to DIN VDE 0282 part 10 Sheath colour: redlilac (RAL 4001) Marking SAB BRÖCKSKES D-VIERSEN item no : S PB 634 2x0,34 mm 2 + 4x1,5 mm 2 C Marking SAB BRÖCKSKES D-VIERSEN item no : S PB 634 2x0,34 mm 2 + 3x1,0 mm 2 C Peak operating voltage: item no : 100 Veff. item no : max. 350 V Testing voltage: core/core 1500 V core/screen 1000 V Min. bending radius flexible application: 12 x d fixed laying: -40/+80 C flexible application: -40/+80 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Oil resistance: TMPU acc. to DIN VDE 0282 part 10 and HD Characteristic impedance: acc. to VDE 0472 part 516 at 3-20 MHz: 150 Ω ± 15 Ω acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 item no. no. of nominal max. copper cable ohmic conductors cross-section outer-ø figure weight resistance at 20 C mm 2 mm kg/km ca. kg/km max. Ω/km ,34 12,0 78, ,0 4 1,50 13,3 item no. no. of nominal max. copper cable ohmic conductors cross-section outer-ø figure weight resistance at 20 C mm 2 mm kg/km ca. kg/km max. Ω/km ,34 10,6 48, ,0 3 1,00 19,5

6 HYBRID AND SPECIAL CABLES Example: Coupling cable Torsion able connecting cable item no cross 33 x 1.5 mm 2 + sections 3 x 10.0 mm x (2 x 1.5) mm 2 6 Conductor: Insulation: Screen: special copper, fine wires TPE spezial copper braid, optical coverage 85% Sheath material: special PUR Nominal voltage: 1,50 mm 2 : Uo/U 0,6/1,0 kv 10,0 mm 2 : Uo/U 1,8/3,0 kv Testing voltage: core/core 1,50 mm 2 : 4000 V, 10,0 mm 2 : V core/screen 1,50 mm 2 : 2000 V, 10,0 mm 2 : 6000 V Min. bending radius flexible application: 10 x d fixed laying: -50/+90 C flexible application: -40/+90 C acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14

7 HYBRID AND SPECIAL CABLES Example: Interbus Hybrid cable for the automotive industry PUR interbus hybrid cable pairwise with copper wrapping for flexible application item no cross 4 x 1,0 mm 2 + sections: 5 x 2 x 0,25 mm x 1,0 mm 2 PVC interbus hybrid cable pairwise with copper wrapping for fixed laying item no cross 4 x 1,00 mm 2 + sections: 5 x 2 x 0,25 mm x 1,00 mm 2 7 Conductor: Insulation: bare copper strands, fine wires 0.25 mm 2 : PE 1.00 mm 2 : TPE Colour code: 0.25 mm 2 : colored acc. to DIN mm 2 : black, blue, red, brown, green/yellow Screen: pairs wrapped with tinned copper wires, optical coverage min. 90% Sheath material: : special PUR : PVC Sheath colour: redlilac (RAL 4001) Peak operating voltage: max. 350 V Testing voltage: core/core 1700 V (AC) core/screen 1000 V (AC) core/core 2500 V (DC) core/screen 1500 V (DC) Min. bending radius: 7.5 x d fixed laying: -40/+70 C -5/+70 C flexible application: -40/+70 C -30/+70 C acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14

8 HYBRID AND SPECIAL CABLES Example: Control cable for the automotive industry Special PUR connection cable with numbered cores and overall copper screen item no cross 23 x 1.0 mm 2 + sections (2 x 1.0 mm 2 ) D + 1 x 1.0 mm 2 8 Conductor: Insulation: Colour code: Screen: Inner sheath: tinned copper strands TPE white cores with consecutive numbers acc. to EN and a green-yellow earth wire wrapped with tinned copper wires TPE Outer sheath: special PUR Peak operating voltage: max. 350 V Testing voltage: core/core 1500 V core/screen 1000 V Min. bending radius: 7.5 x d fixed laying: -50/+90 C flexible application: -40/+90 C acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14

9 RAILWAY CABLE C A 883 Ö twisting and torsion connection cable the use in qfor rail vehicles, e. g. bogies and boxes also possible without earth wire Conductor: Insulation: Colour code: Stranding: Inner sheath: Sheath material: tinned copper strands, acc. to IEC EN 60228, DIN VDE 0295 class 6 TPE black cores with consecutive numbers acc. to DIN VDE green-yellow earth wire from 3 cores in layers A PUR Marking: SAB BRÖCKSKES D-VIERSEN A A 833 Ö dimension C Nominal voltage: Uo/U 300/500 V Testing voltage: core/core 2000 V Min. bending radius fixed laying: 4 x d flexible application: 6 x d fixed laying: -50/+85 C flexible application: -40/+85 C Torsion angle: ± 15 Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Fire performance: flame retardant and self-extinguishing acc. to IEC EN UV resistance: good Ozone resistance: Oil resistance: good good Weather resistance: good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 9 item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 1,50 0,16 8,1 28, x 1,50 0,16 8,4 43, x 1,50 0,16 9,0 57, x 1,50 0,16 10,4 100, x 1,50 0,16 15,2 259,2 417 item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 2,50 0,16 9,7 75, x 2,50 0,16 10,5 100, x 2,50 0,16 11,5 125, x 2,50 0,16 12,2 176, x 4,00 0,16 13,6 192,0 335 Other dimensions and colours are possible on request.

10 CABLE FOR PHOTOVOLTAIC SYSTEMS PV1-F cable For almost 60 years S BRÖCKSKES has been a leading manufacturer of cable technique. Our company s philosophy bases on the development and permanent improvement of product quality. d BRÖCKSKES D-VIERSEN PV1-F 4,0 mm 2 C 10 4 n halogen-free n UV-resistant n fulfills DKE draft AK * Application: Due to our permanent striving for innovative products in line with our efforts for environmental protection, we have focussed our attention on renewable energy. As a consequence the PV1-F cable has been our la test development. Already in 2008 about 1.7 million solar systems were installed with upward trend. Every day the sun delivers an energy quantity going beyond eighty times the consumption of ermany. Furthermore, this source is free of charge and will be inexhaustible within the next billions of years. In future solar energy will replace conven tional energy sources such as oil or gas. The PV1-F cable fulfills the requirements of cables for photovoltaic systems acc. to the DKE draft AK * and is particularly used as connection cable in photovoltaic systems. The cable is suitable for various climatic conditions such as outdoor use as well as for fixed laying in dry, damp and wet rooms. Our solar cable is approved by the DKE draft AK * for a maximum temperature at the conductor up to +120 C and suitable as electrical equipment of protection class II. *as at

11 CABLE FOR PHOTOVOLTAIC SYSTEMS PV1-F halogen-free cable for photovoltaic systems The requirements acc. to the DKE draft AK * are fulfilled. B C VDE-RE.-Nr PV1-F 4,0 mm 2 VDE-RE.-Nr TÜVSüd-Bauart geprüft B Marking for PV1-F : SAB BRÖCKSKES D-VIERSEN PV1-F 4,0 mm 2 VDE-RE.-Nr TÜVSüd-Bauart geprüft B C Conductor : tinned copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 Primary insulation: Color code primary insulation: Secondary insulation: Color code secondary insulation: A solar see table below A solar see table below Outstanding features: fulfills DKE draft AK * halogen-free no flame propagation flame retardant and self-extinguishing up to +120 C weather resistant sunlight resistance with improved fire performance expected service life: up to 25 years very good resistance against acids and alkaline solutions ammonia resistance absence of marten attractants Nominal voltage Uo/U: Testing voltage: Min. bending radius Ø 12 mm: Ø > 12 mm: 0,6/1 kv (AC) 6500 V (AC) 3 x d 4 x d for ambient temperature: up to +90 C maximum temperature at the conductor: +120 C for installation: -30/+120 C fixed laying: -40/+120 C short circuit: +250 C VDE-RE.-no as well as TÜV SÜD type tested B : Halogen-free : without hydrogen chloride acc. to EN , without fluorine content acc. to EN Corrosiveness of in compliance with IEC conflagration gases: EN VDE part no development of corrosive conflagration gases Fire performance: flame retardant and self-extinguishing acc. to IEC EN Sunlight resistance: Weather resistance: yes very good Ozone resistance: acc. to EN Ammonia resistance: very good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 11 item no. nominal outer-ø copper cable cross-section max. figure weight mm 2 mm kg/km kg/km ,50 5,0 14, ,50 5,4 24, ,00 6,0 38, ,00 6,9 57, ,0 8,9 96, ,0 10,3 153, ,0 12,5 240, ,0 13,9 236,0 463 Other dimensions are possible on request. Marking for primary insulation and secondary insulation Primary insulation / secondary insulation 33 black / black 38 black / red 32 black / blue 83 red / black 88 red / red 22 blue / blue 23 blue / black Other colours are possible on request. suitable for protecting class II 4 *as at

12 CABLE FOR PHOTOVOLTAIC SYSTEMS PV1-F dual halogen-free twin cable for photovoltaic systems The requirements acc. to the DKE draft AK * are fulfilled. B PV1-F 2x6,0 mm 2 VDE-RE.-Nr TÜVSüd-Bauart geprüft B C Marking for PV1-F dual : SAB BRÖCKSKES D-VIERSEN PV1-F 2x6,0 mm 2 VDE-RE.-Nr TÜVSüd-Bauart geprüft B C +120 C VDE-RE.-Nr Conductor : tinned copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 Primary insulation: Color code primary insulation: Secondary insulation: Color code secondary insulation: A solar black / red or black / blue A solar black Outstanding features: fulfills DKE draft AK * halogen-free no flame propagation flame retardant and self-extinguishing up to +120 C weather resistant sunlight resistance with improved fire performance expected service life: up to 25 years very good resistance against acids and alkaline solutions ammonia resistance absence of marten attractants Nominal voltage Uo/U: Testing voltage: Min. bending radius Ø 12 mm: Ø > 12 mm: 0,6/1 kv (AC) 6500 V (AC) 3 x d 4 x d for ambient temperature: up to +90 C maximum temperature at the conductor: +120 C for installation: -30/+120 C fixed laying: -40/+120 C short circuit: +250 C VDE-RE.-no as well as TÜV SÜD type tested B : Halogen-free : without hydrogen chloride acc. to EN , without fluorine content acc. to EN Corrosiveness of in compliance with IEC conflagration gases: EN VDE part no development of corrosive conflagration gases Fire performance: flame retardant and self-extinguishing acc. to IEC EN Sunlight resistance: Weather resistance: yes very good Ozone resistance: acc. to EN Ammonia resistance: very good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 item no. no. of nominal outer-ø copper cable conductors cross-section approx. figure weight mm 2 mm kg/km kg/km ,00 6,0 x 11,9 76, ,00 6,9 x 13,8 115, ,0 8,7 x 17,4 192,0 323 Other dimensions are possible on request. Marking for primary insulation and secondary insulation Primary insulation / secondary insulation 83 red / black 23 blue / black Other colours are possible on request. suitable for protecting class II 4 *as at

13 CABLE FOR PHOTOVOLTAIC SYSTEMS PV Wire halogen-free cable for photovoltaic systems Photovoltaic Wire Service- Entrance Cable wet sunlight-resistant -40 C ( U L) Service-Entrance Cable Type USE-2 600V Single Conduct SAB BRÖCKSKES D-VIERSEN Conductor : tinned copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 and UL standard 758 table UL 1581 table 20.1 Primary insulation: A 285 Color code primary insulation: see table below Secondary insulation: A 285 Color code secondary insulation: see table below Outstanding features: UL Subject 4703 PV Wire UL 854 USE-2 halogen-free flame retardant and self-extinguishing weather resistant sunlight resistance very good resistance against acids and alkaline solutions connection cable for photovoltaic modules acc. to NEC Section (A) ammonia resistance absence of marten attractants Marking for PV Wire : 12 AW ( U L) Photovoltaic Wire 600V 90 C dry 90 C wet sunlight-resistant -40 C ( U L) Service-Entrance Cable Type USE-2 600V Single Conductor C Nominal voltage: 600 V (AC) Testing voltage: 3000 V (AC) Min. bending radius Ø 12 mm: 3 x d Ø > 12 mm: 4 x d for ambient temperature: -40 C/+90 C Halogen-free : without hydrogen chloride acc. to EN , without fluorine content acc. to EN Corrosiveness of in compliance with IEC conflagration gases: EN VDE part no development of corrosive conflagration gases. Fire performance: flame retardant and self-extinguishing acc. to IEC EN and (UL) FT1 Sunlight resistance: yes Weather resistance: very good Ozone resistance: acc. to EN Ammonia resistance: very good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 13 item no. AW outer-ø copper cable max. figure weight mm kg/km kg/km ,6 38, ,1 57, ,9 84,5 151 Other dimensions are possible on request. Marking for primary insulation and secondary insulation Primary insulation / secondary insulation 33 black / black 23 blue / black 63 white / black 83 red / black Other colours for the primary insulation possible on request.

14 B CABLE FOR PHOTOVOLTAIC SYSTEMS PV1-F with UL +120 C 0 C ( U L) Service-Entrance Cable Type USE-2 600V Single Conductor C halogen-free cable for photovoltaic systems VDE-RE.-Nr Marking for PV1-F with UL : SAB BRÖCKSKES D-VIERSEN PV1-F 4,0 mm 2 VDE-RE.-Nr TÜVSüd-Bauart geprüft B AW12 (UL) Photovoltaic Wire 600V 90 C dry 90 C wet sunlight-resistant -40 C ( U L) Service-Entrance Cable Type USE-2 600V Single Conductor C Photovoltaic Wire Service- Entrance Cable The requirements acc. to the DKE draft AK * are fulfilled. 14 Conductor : tinned copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 and UL standard 758 table UL 1581 table 20.1 Primary insulation: A solar Color code primary insulation: see table below Secondary insulation: Color code secondary insulation: A solar see table below Outstanding features: fulfills DKE draft AK * UL Subject 4703 PV Wire UL 854 USE-2 halogen-free no flame propagation flame retardant and self-extinguishing up to +120 C weather resistant sunlight resistance with improved fire performance expected service life: up to 25 years very good resistance against acids and alkaline solutions connection cable for photovoltaic modules acc. to NEC Section (A) ammonia resistance absence of marten attractants Nominal voltage Uo/U: 0,6/1 kv (AC) (UL): 600 V (AC) Testing voltage: 6500 V (AC) (UL): 3000 V (AC) Min. bending radius Ø 12 mm: 3 x d Ø > 12 mm: 4 x d VDE-RE.-no as well as TÜV SÜD type tested B : for ambient temperature: up to +90 C (UL): -40 C/+90 C maximum temperature at the conductor: +120 C for installation: -30/+120 C fixed laying: -40/+120 C short circuit: +250 C Halogen-free : without hydrogen chloride acc. to EN , without fluorine content acc. to EN Corrosiveness of in compliance with IEC conflagration gases: EN VDE part no development of corrosive conflagration gases Fire performance: flame retardant and self-extinguishing acc. to IEC EN and (UL) FT1 Sunlight resistance: yes Weather resistance: very good Ozone resistance: acc. to EN Ammonia resistance: very good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 item no. nominal outer-ø copper cable cross-section mm figure weight mm 2 kg/km kg/km ,00 6,8 38, ,00 7,5 57,6 114 suitable for protecting class II Other dimensions are possible on request. 4 Marking for primary insulation and secondary insulation Primary insulation / secondary insulation 33 black / black 83 red / black 23 blue / black 63 white / black Other colours are possible on request. *as at

15 LIFT CABLES with improved fire performance C Lift Lift control cable with sisal cord as suspension unit D-VIERSEN SABIX Lift 24 x 1,0 m Marking for SABIX Lift : SAB BRÖCKSKES D-VIERSEN SABIX Lift 24 x 1,0 mm 2 C Our halogen-free lift cables are used whenever there are highest safety requirements, especially in public buildings and institutions as for example department stores, hospitals, railway and airport institutions, etc. Conductor: Insulation: Colour code: Strain relief: Stranding: Wrapping: Supporting braid: bare copper strands, acc. to IEC 60228, EN 60228, DIN VDE 0295 class 6 special A black cores with consecutive numbers acc. to EN and green-yellow earth wire sisal cord sisal cord as core, optimized twisting of the conductors in layers netting tape on each layer with overlap wrapping special torsion protecting net Sheath material: thermoplastic special elastomer Nominal voltage: Testing voltage: Uo/U 300/500 V Min. bending radius: 15 x d fixed laying: -40/+90 C flexible application: -30/+90 C conductor/conductor 2000 V Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Fire performance: no flame propagation acc. to IEC EN category C resp. D (see page N/20) Suspended height: up to 60 m acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 Product advantages: halogen-free long service life elevated economic efficiency flame retardant and self-extinguishing 15 item no. no. of cores x medium copper cable ohmic cross section outer-ø figure weight resistance at 20 C n x mm 2 ø mm kg/km kg/km max. Ω/km x 1,00 11,8 67, , x 1,00 22,0 230, , x 1,00 23,3 288, ,5 Further dimensions or special constructions on request. q Possible on request! with total copper braiding with different conductor and sheath colours Note: Please pay attention to the installation instructions on page N/27! You will find a life cycle test C Lift on page N/22!

16 LIFT CABLES Highest hanging lengths C Lift ST Lift control cable with steel center as suspension unit KSKES D-VIERSEN SABIX Lift ST 24 x 1,0 mm 2 C Marking for SABIX Lift ST : SAB BRÖCKSKES D-VIERSEN SABIX Lift ST 24 x 1,0 mm 2 C Our halogen-free lift cables are used whenever there are highest safety requirements, especially in public buildings and institutions as for example department stores, hospitals, railway and airport institutions, etc. Conductor: Insulation: Colour code: Strain relief: Stranding: Wrapping: Supporting braid: bare copper strands, acc. to IEC 60228, EN 60228, DIN VDE 0295 class 6 special A black cores with consecutive numbers acc. to EN and green-yellow earth wire steel rope in the center steel rope as core, optimized twisting of conductors in layers netting tape on each layer with overlap wrapping special torsion protecting net Sheath material: thermoplastic special elastomer Nominal voltage: Testing voltage: Uo/U 300/500 V Min. bending radius: 15 x d fixed laying: -40/+90 C flexible application: -30/+90 C conductor/conductor 2000 V Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Fire performance: no flame propagation acc. to IEC EN category c resp. D (see page N/20) Suspended height: up to 200 m acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 16 Product advantages: halogen-free highest hanging lengths long service life flame retardant and self-extinguishing item no. no. of cores x medium copper cable ohmic cross section outer-ø figure weight resistance at 20 C n x mm 2 ø mm kg/km kg/km max. Ω/km x 1,00 18,6 230, , x 1,00 20,9 288, ,5 Further dimensions or special constructions on request. q Possible on request! with total copper braiding with different conductor and sheath colours Note: Please pay attention to the installation instructions on page N/27! You will find a life cycle test C Lift on page N/22!

17 PVC FLAT CABLES H05VVH6-F BRÖCKSKES D-VIERSEN wvdeswhars H05VVH6-F 240,7 Marking for PVC Flat cable : SAB BRÖCKSKES D-VIERSEN wvdeswhars H05VVH6-F 240,75 mm 2 C Conductor: bare copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 Insulation: Colour code: Stranding: PVC black with white numbers and green-yellow earth wire cores parallel side by side in groups Sheath material: PVC Nominal voltage: Uo/U 300/500 V Min. bending radius: 10 x d fixed laying: -40 C/+70 C flexible application: -40 C/+70 C Fire performance: flame retardant and self-extinguishing acc. to IEC EN Oil resistance: acc. to internal standard, see page N/13 acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 item no. no. of cores largest dimension copper cable x cross section single wire width x height figure weight n x mm 2 ø mm approx. mm kg/km kg/km x 0,75 0,21 17,8 x 4,2 43, x 0,75 0,21 25,8 x 4,2 64, x 0,75 0,21 39,1 x 4,2 86, x 0,75 0,21 43,5 x 4,2 115, x 0,75 0,21 48,4 x 4,2 129, x 0,75 0,21 53,9 x 4,2 144, x 0,75 0,21 64,3 x 4,2 172, x 1,0 0,21 12,7 x 4,3 38, x 1,0 0,21 15,3 x 4,3 48, x 1,0 0,21 18,4 x 4,3 57, x 1,0 0,21 26,7 x 4,3 86, x 1,0 0,21 34,3 x 4,3 115, x 1,0 0,21 45,1 x 4,3 153, x 1,0 0,21 50,2 x 4,3 172, x 1,0 0,21 55,9 x 4,3 192, x 1,0 0,21 66,7 x 4,3 230, Other dimensions and colours are possible on request.

18 PVC FLAT CABLES H07VVH6-F KES D-VIERSEN wvdeswhars H07VVH6-F 121,5 mm 2 C Marking for PVC Flat cable : SAB BRÖCKSKES D-VIERSEN wvdeswhars H07VVH6-F 12 x 1,5 mm 2 C Conductor: bare copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 Insulation: PVC Colour code: coloured acc. to HD 308 (VDE 0293 part 308); black cores with consecutive numbers acc. to EN from 6 cores; green-yellow earth wire from 3 cores Stranding: cores parallel side by side in groups Sheath material: PVC Nominal voltage: Uo/U 450/750 V Min. bending radius: 10 x d fixed laying: -40 C/+70 C flexible application: -40 C/+70 C Fire performance: flame retardant and self-extinguishing acc. to IEC EN Oil resistance: acc. to internal standard, see page N/13 acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 18 item no. no. of cores largest dimension copper cable x cross section single wire width x height figure weight n x mm 2 ø mm approx. mm kg/km kg/km x 1,50 0,26 15,3 x 5,2 57, x 1,50 0,26 25,6 x 5,2 100, x 1,50 0,26 28,6 x 5,2 115, x 1,50 0,26 41,9 x 5,2 172, x 2,50 0,26 18,3 x 5,8 96, x 2,50 0,26 50,7 x 5,8 288, x 4,00 0,31 57,4 x 6,8 460, x 6,00 0,31 22,7 x 7,3 230, x 6,00 0,31 27,5 x 7,3 288, x 10,0 0,41 35,7 x 9,3 480, x 25,0 0,41 42,5 x 12,9 960, Other dimensions and colours are possible on request.

19 REELIN CABLES DR 717 P Highflex BRÖCKSKES D-VIERSEN DR 717 P Highflex 4 2,5 mm 2 C Marking for DR 717 P Highflex : SAB BRÖCKSKES D-VIERSEN DR 717 P Highflex 4 2,5 mm 2 C Conductor: bare copper strands acc. to IEC EN 60228, VDE 0295, class 5 Insulation: special polymer Colour code: coloured acc. to HD 308 (VDE 0293 part 308); from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores DMX-bus: white/brown, green/yellow IE Cat 5: white-blue/blue, white-orange/orange, white-green/green, white-brown/brown Stranding: specially adjusted layering around central suspension unit Inner sheath: PUR Supporting screen: high-tech yarn Outer sheath: PUR Outstanding features: reeling length up to 60 m high winding and unwinding strength corresponds to low voltage guideline 73/23/EW CE small outer diameter small cable weight Application: The DR 717 P Highflex is used for spring cables reels on stages and theaters Nominal voltage: Peak operating volatge: Testing voltage: Technical Data: Uo/U 300/500 V (supply conductors) item no : max. 500 V (DMX-bus) item no : max. 125 V (IE Cat 5) core/core 2000 V Current-carrying capacity: acc. to DIN VDE , see page N/33 + N/34 Min. bending radius: for laying and installation (fixed laying): 12 mm 3 x d / >12 mm 4 x d for repeated winding action (flexible): 6 x d guided on deflection pulleys (flexible): 7,5 x d item no. item no with installation: -00/+50 C fixed laying: -50/+90 C -40/+70 C -20/+60 C flexible application: -40/+90 C -40/+70 C -20/+60 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chemical resistance: good against acids, alkalines, solvents, hydraulic liquids, etc. Fire performance: flame retardant and self-extinguishing acc. to IEC and EN Sunlight resistance: very good - enhanced due to black sheath colour Tensile strength: with reference to DIN VDE section 7.1 Mechanical the main mechanical characteristics accomplished characteristics: by the PUR outer sheath are: - high tensile strength - high tear strength - high abrasion resistance - high notch resistance harmful acc. to RoHS guideline 2002/95/E as well as substances: efstoffv appendix IV-no. 24 see page N/14 19 item no. no. of cores x outer-ø copper cable tensile min breaking cross section ± 5% figure weight strength load of n x mm 2 mm kg/km kg/km max. N suspension unit N ,50 9,7 96, ,00 11,7 153, ,00 20,9 537, ,00 23,3 768, ,00 28,3 960, ,00 13,4 230, ,00 24,3 748, ,0 17,1 384, ,0 21,3 614, , x (2 x 0,25)C 22,4 575, ,0 + 4 x 2 x 0,14 26,4 791, ,00 min. 25,0 max. 28,0 960, Other dimesnsions and colours are possible on request. Please mention the required winding length when placing the order. Note: Please pay attention to the installation instructions on page N/26

20 REELIN CABLES DR 718 CP Highflex with overall copper screen ÖCKSKES D-VIERSEN DR 718 CP Highflex 4 x 2,5 mm 2 C Marking for DR 718 CP Highflex : SAB BRÖCKSKES D-VIERSEN DR 718 CP Highflex 4 x 2,5 mm 2 C 20 Conductor: bare copper strands acc. to IEC EN 60228, VDE 0295, class 5 Insulation: special polymer Colour code: coloured acc. to HD 308 (VDE 0293 part 308); from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores Stranding: specially adjusted layering around central suspension unit Inner sheath: Screen: PUR tinned copper braiding Outer sheath: PUR Outstanding features: high winding and unwinding strength small cable weight good EMC characteristics Applications: The DR 718 CP Highflex is used for spring cable reels on stages for example in theaters as well as control cable in crane arms q Technical Data: Nominal voltage: Uo/U 300/500 V Testing voltage: 2000 V Current-carrying capacity: acc. to DIN VDE , see page N/33 + N/34 Min. bending radius: for laying and installation (fixed laying): 5 x d for repeated winding action (flexible): 7,5 x d guided on deflection pulleys (flexible): 10 x d fixed laying: -50/+90 C flexible application: -40/+90 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Fire performance: flame retardant and self-extinguishing acc. to IEC and EN Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chemical resistance: good against acids, alkalines, solvents, hydraulic liquids, etc. Sunlight resistance: very good - enhanced due to black sheath colour Tensile strength: with reference to DIN VDE section 7.1 Mechanical the main mechanical characteristics accomplished characteristics: by the PUR outer sheath are: - high tensile strength - high tear strength - high abrasion resistance - high notch resistance acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 Also possible without inner sheath! item no. no. of cores x outer-ø copper cable tensile min breaking cross section ± 5% figure weight strength load of n x mm 2 mm kg/km kg/km max. N suspension unit N x 0,50 12,8 161, x 0,50 14,9 192, x 0,75 16,9 281, x 1,00 8,0 62, x 1,00 15,0 188, x 1,00 14,5 237, x 1,00 17,8 355, x 1,00 17,8 365, x 1,50 8,9 86, x 1,50 10,2 120, x 1,50 11,9 157, x 1,50 16,9 274, x 1,50 16,3 301, x 1,50 16,3 330, x 1,50 16,4 359, x 1,50 18,2 463, x 1,50 23,4 586, x 1,50 22,2 681, x 2,50 10,8 144, x 2,50 11,9 176, x 2,50 13,7 232, x 2,50 19,9 418, item no. no. of cores x outer-ø copper cable tensile min breaking cross section ± 5% figure weight strength load of n x mm 2 mm kg/km kg/km max. N suspension unit N x 2,50 19,5 561, x 2,50 23,6 730, x 2,50 26,8 892, x 2,50 26,1 1035, x 2,50 30,7 1353, x 2,50 32,6 1547, x 4,00 12,3 210, x 4,00 13,7 256, x 4,00 16,3 372, x 6,00 13,7 302, x 6,00 15,7 389, x 6,00 18,9 518, x 10,0 18,1 499, x 10,0 20,3 609, x 16,0 22,3 757, x 16,0 24,9 926, x 25,0 27,0 1131, x 35,0 30,8 1542, x 50,0 35,3 2147, Other dimesnsions and colours are possible on request. Please mention the required winding length when placing the order. Note: Please pay attention to the installation instructions on page N/26

21 REELIN CABLES DR 721 P BRÖCKSKES D-VIERSEN DR 721 P 12 1,5 mm Marking for DR 721 P : SAB BRÖCKSKES D-VIERSEN DR 721 P 12 1,5 mm 2 C Conductor: bare copper strands acc. to IEC EN 60228, VDE 0295, class 5 Insulation: special polymer Colour code: coloured acc. to HD 308 (VDE 0293 part 308); from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores Stranding: specially adjusted layering Inner sheath: special PVC Supporting screen: high-tech yarn Outer sheath: PUR Outstanding features: good winding and unwinding strength small outer diameter small cable weight corresponds to low voltage guideline 73/23/EW CE Application: The DR 721 P is used for spring cable and motor cable reels, hoists, transport systems and farm vehicles with medium mechanical stress. Nominal voltage: Testing voltage: Technical Data: 0,6/1 kv core/corer 4000 V Current-carrying capacity: acc. to DIN VDE , see page N/33 + N/34 Min. bending radius: for laying and installation (fixed laying): 6 x d for repeated winding action (flexible): 10 x d guided on deflection pulleys: (flexible): 12 x d of the cable: fixed laying: -30/+70 C flexible: -30/+70 C Temperature resistance of primary insulation: up to +90 C Fire performance: flame retardant and self-extinguishing acc. to IEC und EN Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chemical resistance: very good against acids, alkaline solutions, solvents and hydraulic liquids, etc. Weather resistance: very good Sunlight resistance: very good - enhanced due to black sheath colour Tensile strength: acc. to DIN VDE section 7.1 Mechanical the main mechanical characteristics characteristics: accomplished by the PUR outer sheath are: - high tensile strength - high tear strength - high abrasion resistance - high notch resistance harmful acc. to RoHS guideline 2002/95/E as well as substances: efstoffv appendix IV-Nr. 24 see page N/14 21 item no. no. of coresx outer-ø copper cable cross section ± 5% figure weight n x mm 2 mm kg/km kg/km ,50 8,8 57, ,50 9,6 72, ,50 11,7 100, ,50 16,4 172, ,50 16,3 259, ,50 19,6 345, ,50 22,1 518, ,50 10,2 96, ,50 11,2 120, ,50 13,6 168, ,50 19,4 288, ,50 19,4 432, ,50 23,6 576,0 891 item no. no. of coresx outer-ø copper cable cross section ± 5% figure weight n x mm 2 mm kg/km kg/km ,50 26,4 864, ,00 12,4 153, ,00 14,4 230, ,00 15,6 288, ,0 17,9 384, ,0 22,4 614, ,0 25,0 768, x 25, ,00 24,2 892, x 35, ,00 28,0 1180, x 50, ,0 31,8 1728, Other dimesnsions and colours are possible on request. Please mention the required winding length when placing the order. Note: Please pay attention to the installation instructions on page N/26

22 REELIN CABLES DR 720 P Highflex D-VIERSEN DR 720 P Highflex 12 1,5 mm 2 C Marking for DR 720 P Highflex : SAB BRÖCKSKES D-VIERSEN DR 720 P Highflex 12 1,5 mm 2 C 22 Conductor: bare copper strands acc. to IEC EN 60228, VDE 0295, class 5 Insulation: special polymer Colour code: coloured acc. to HD 308 (VDE 0293 part 308); from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores Stranding: specially adjusted layering around central suspension unit Inner sheath: PUR Supporting screen: high-tech yarn Outer sheath: PUR Outstanding features: path feed rate up to 120 m/min. high winding and unwinding strength small outer diameter small cable weight corresponds to low voltage guideline 73/23/EW CE Application: The DR 720 P Highflex is used for heavy appliances as for example motor cable reels hoists, transport systems, movable motors and farm vehicles with high mechanical stress. Nominal voltage: Testing voltage: Technical Data: 0,6/1 kv core/core 4000 V Current-carrying capacity: acc. to DIN VDE , see page N/33 + N/34 Min. bending radius: for laying and installation (fixed laying): 12 mm 3 x d / >12 mm 4 x d for repeated winding action (flexible): 6 x d guided on deflection pulleys (flexible): 7,5 x d fixed laying: -50/+90 C flexible application: -40/+90 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chemical resistance: good against acids, alkalines, solvents, hydraulic liquids, etc. Fire performance: flame retardant and self-extinguishing acc. to IEC and EN Weather resistance: very good Sunlight resistance: very good - enhanced due to black sheath colour Tensile strength: acc. to DIN VDE section 7.1 Mechanical the main mechanical characteristics accomplished characteristics: by the PUR outer sheath are: - high tensile strength - high tear strength - high abrasion resistance - high notch resistance harmful acc. to RoHS guideline 2002/95/E as well as substances: efstoffv appendix IV-Nr. 24 see page N/14 item no. no. of cores x outer-ø copper cable min breaking cross section ± 5% figure weight load of n x mm 2 mm kg/km kg/km suspension unit N ,50 9,0 57, ,50 9,8 72, ,50 11,8 100, ,50 16,6 172, ,50 16,4 259, ,50 10,4 96, ,50 11,6 120, ,50 19,6 288, ,50 19,7 432, ,50 23,8 576, ,50 26,6 720, ,50 32,4 1200, item no. no. of cores x outer-ø copper cable min breaking cross section ± 5% figure weight load of n x mm 2 mm kg/km kg/km suspension unit N ,00 12,4 153, ,00 24,0 460, ,00 14,8 230, ,0 18,2 384, ,0 22,7 614, x 25, ,00 24,3 892, ,0 26,9 960, x 35, ,00 28,1 1180, ,0 31,5 1344, x 50, ,0 31,9 1728, Other dimesnsions and colours are possible on request. Please mention the required winding length when placing the order. Note: Please pay attention to the installation instructions on page N/26

23 CABLES FOR CRANE AND CONVEYOR APPLICATIONS Spreader 722 Control cable hoisting cages in crane systems BRÖCKSKES D-VIERSEN Spreader x 2,5 mm 2 C s Marking for Spreader : SAB BRÖCKSKES D-VIERSEN Spreader x 2,5 mm 2 C Conductor: Insulation: Colour code: Suspension unit: Stranding: Wrapping: Stranding: Wrapping: bare copper strands PVC black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores Armid braided with lead, 50 m of the suspended cable are supported by a 5 times safety calculation cores are twisted to bundles with lead cord in the centre overlapping non-woven tape bundle and lead cords twisted, suspension unit in the centre overlapping non-woven tape Outer sheath: PUR Outstanding features: for hoisting cage applications high breaking load of supporting unit oil resistant weather resistant Nominal voltage: Technical Data: Uo/U 300/500 V Testing voltage: core/core 2000 V fixed laying: -20/+60 C flexible application: -20/+60 C max. allowed operating temperature at conductor: +70 C short circuit temperature at cocductor: +150 C Tensile load: max. 15 N/mm 2 x sum of all cable sections Recommended cage diameter min. 30 x d, cage dimensions: cage height approx. 45 x d Travel speed hoisting gear: max. 160 m/min. Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Weather resistance: appropriate for applications in dry, damp and wet rooms as well as in the open-air with a very good resistance against ozone, UV radiation and humidity 23 item no. no. of cores outer-ø copper cable x cross section ± 10% figure weight n x mm 2 mm kg/km kg/km x 1,00 32,1 460, x 2,50 29,7 576, x 2,50 32,9 720, x 2,50 36,2 864, x 2,50 39,2 1008, x 2,50 41,9 1152, x 3,50 30,9 633, x 3,50 33,2 760, x 3,50 37,0 950, x 3,50 40,2 1140, Other dimesnsions and colours are possible on request. q Application: Cable for carriers for example spreaders with high mechanical stress and vertical cage operation

24 CABLES FOR CRANE AND CONVEYOR APPLICATIONS Festoon 715 P PUR cable for flexible application in festoon systems S AB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C Marking for Festoon 715 P : SAB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C A B BRÖCKSKES D-VIERSEN Festoon 715 P 18 x 2,5 mm 2 C Marking for Festoon 715 P : SAB BRÖCKSKES D-VIERSEN Festoon 715 P 18 x 2,5 mm 2 C 24 Conductor: bare copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 5 Insulation: Colour code: Stranding: Wrapping: TPE single conductor black; from 2 conductors coloured acc. to HD 308 (VDE 0293 part 308); from 6 conductors black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores specially adjusted layering around a central suspension unit non-woven tape Sheath material: PUR Outstanding features: halogen-free high abrasion resistance small outer diameter Path feet rate in cable roller assemblies up to 240 m/min. Nominal voltage: Uo/U 0,6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 Min. bending radius: 6 x d Continuous tensile load: max. 15 N/mm 2 acc. to DIN VDE 0298 part 3 section 7.1 fixed laying: -50/+90 C flexible application: -40/+90 C Halogen-free: acc. to DIN VDE 0472 part IEC Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chem. resistance: good against acids, alkalines, solvents, hydraulic liquids etc.. Continuous flexibility: very good Weather resistance: very good acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 1,50 0,26 7,3 43, x 1,50 0,26 7,9 57, x 1,50 0,26 8,6 72, x 1,50 0,26 10,2 100, x 1,50 0,26 12,6 172, x 1,50 0,26 15,0 259, x 1,50 0,26 17,7 345, x 1,50 0,26 18,9 432, x 2,50 0,26 8,3 72, x 2,50 0,26 9,3 96, x 2,50 0,26 10,1 120, x 2,50 0,26 12,1 168, x 2,50 0,26 15,7 288, x 2,50 0,26 17,5 432, x 2,50 0,26 21,1 576, x 2,50 0,26 22,3 720, x 4,00 0,31 10,9 153, x 6,00 0,31 12,8 230, x 10,00 0,41 15,1 288, x 10,00 0,41 16,5 384, x 10,00 0,41 18,2 480, x 16,00 0,41 8,7 153, x 16,00 0,41 18,8 460, x 16,00 0,41 20,7 614, x 16,00 0,41 23,1 768, x 25,00 0,41 10,5 240, x 25,00 0,41 24,3 960, x 25,00 0,41 27,1 1200, item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 35,00 0,41 12,1 226, x 35,00 0,41 28,5 1344, x 50,00 0,41 13,5 480, x 50,00 0,41 32,1 1920, x 70,00 0,41 15,8 672, x 95,00 0,51 18,7 912, x 120,00 0,51 20,4 1152, x 150,00 0,51 22,3 1440, x 185,00 0,51 24,0 1776, x 240,00 0,51 28,1 2304, x 6, x 1,00 0,31 11,9 201, x 50, x 10,00 0,41 29,0 1728, Other dimensions and colours are possible on request. q The Festoon 715 P cable is applied for high mechanical stress. It is particulary suitable for use in cable roller assemblies.

25 CABLES FOR HIH MECHANICAL STRESS MR 460 Control cable with numbered cores and fibre-reinforced PUR sheath D-VIERSEN MR x 0,75 mm C Marking for MR : SAB BRÖCKSKES D-VIERSEN MR x 0,75 mm C Conductor: bare copper strands acc. to IEC 60228, EN 60228, VDE 0295, class 6 Insulation: Colour code: Stranding: TPE black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores specially adjusted layering Wrapping: non-woven tape Supporting screen: high-tech yarn Sheath material: PUR, TMPU acc. to DIN VDE 0282 part 10 + HD Sheath colour: black (similar RAL 9005) Outstanding features: halogenfree reinforced outer sheath for high mechanical stress notch resistant abrasion resistant good flexibility also at low temperatures weather resistant oil resistant good chemical resistance Sunlight resistant Nominal voltage: Uo/U 300/500 V Testing voltage: 2000 V Min. bending radius fixed laying: 5 x d flexible application: 10 x d fixed laying: -50/+90 C flexible application: -40/+90 C Halogen-free: acc. to DIN VDE 0472 part 815 and IEC Oil resistance: very good - TMPU acc. to DIN VDE 0282 part 10 + HD Chemical resistance: good against acids, alkalines, solvents, hydraulic liquids, etc. UV-resistance: very good - enhanced due to black sheath colour Mechanical the main mechanical characteristics accomplished characteristics: by the PUR outer sheath are: - high tensile strength - high tear strength - high abrasion resistance - high notch resistance - high transverse stregth acc. to RoHS-guideline 2002/95/E as well as harmful substances: efstoffv appendix IV-no. 24, see page N/14 25 item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 0,50 0,16 6,4 14, x 0,50 0,16 6,7 19, x 0,50 0,16 7,3 24, x 0,50 0,16 8,2 33, x 0,50 0,16 9,8 57, x 0,50 0,16 11,2 86, x 0,50 0,16 13,2 120, x 0,75 0,16 7,0 21, x 0,75 0,16 7,4 28, x 0,75 0,16 8,0 36, x 0,75 0,16 9,0 50, x 0,75 0,16 10,9 86, x 0,75 0,16 12,9 129, x 0,75 0,16 15,2 180, x 1,00 0,16 7,4 28, x 1,00 0,16 7,9 38, x 1,00 0,16 8,5 48, x 1,00 0,16 9,9 67,2 137 item no. no. of cores largest outer-ø copper cable x cross section single wire ± 5% figure weight n x mm 2 ø mm mm kg/km kg/km x 1,00 0,16 11,9 115, x 1,00 0,16 13,6 172, x 1,00 0,16 16,6 240, x 1,50 0,16 8,0 43, x 1,50 0,16 8,6 57, x 1,50 0,16 9,3 72, x 1,50 0,16 10,9 100, x 1,50 0,16 13,1 172, x 1,50 0,16 15,5 259, x 1,50 0,16 18,4 360, x 2,50 0,16 9,8 72, x 2,50 0,16 10,5 96, x 2,50 0,16 11,5 120, x 2,50 0,16 13,5 168, x 2,50 0,16 16,7 288, x 2,50 0,16 19,4 432, x 2,50 0,16 23,4 600,0 868 Other dimensions and colours are possible on request. q For unprotected usage with high mechanical stress e.g. in the forest and agriculture industry!

26 HYBRID AND SPECIAL CABLES Enquiry for special cable to S BRÖCKSKES mbh & Co. K Fax: +49 / / Phone: +49 / / Company/Name: Please calculate a non-binding offer based on the following data: r We need a cable for the following application: r Dimension: r Quantity: r Requested delivery time: 26 r r r fixed laying: flexible application: r Special ambient influences: B BRÖCKSKES mbh & Co. K refrather Straße b Viersen ERMANY info@sab-broeckskes.de #

27 HYBRID AND SPECIAL CABLES Cable harnessing n Due to the good co-operation with our customers we get continuously new ideas. Therefore, S Bröckskes has enlarged the product range by the field of cable and wire harnessing. No matter whether you need cable looms, assembled single conductors or cables - S Bröckskes offers a wide range of products, especially adjusted to your demands and specifications. There are many possibilities in use of assembled cables. Some of these applications are in the car manufacturing industry, machine and industrial plant construction, control engineering, manufacturing of house hold appliances. Connection possibilities of the large variety of connectors and sling parts offer efficient and cost saving solutions. The variety of possible uses of materials that are processed by S Bröckskes at present: 27 n PUR n TPE n Besilen (silicone) n PVC (polyvinyl chloride) n A (halogen-free) n ETFE, FEP, PFA n Rubber n Special materials (fibre glass, Kapton, Stex etc.) also offer a wide range of applications in industry. n Please do not hesitate to contact our specialists, who will help you with an individual advice fitting to your application.