Tapper Concrete Scew Anchor Type 410 & 304 Stainless Steel

Size: px

Start display at page:

Download "Tapper Concrete Scew Anchor Type 410 & 304 Stainless Steel"

Belinda Phelps
6 years ago
Views:

Conrete Sew Type 4 & 304 PRODUCT DESCRIPTION The fastening system is a family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base materials.

The srew anhor is engineere with mathe tolerane rill bits an installation tools esigne to meet the nees of the user an also provie optimum performane.

1 Conrete Sew Type 4 & 304 PRODUCT DESCRIPTION The fastening system is a family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base materials. The is fast an easy to install an provies a neat, finishe appearane. The srew anhor is engineere with mathe tolerane rill bits an installation tools esigne to meet the nees of the user an also provie optimum performane. For every projet, it is important to onsier several things before making a seletion: The proper hea style, the olor or finish that is esire, an the require level of orrosion resistane. The srew anhor is available in 4 an 304 stainless steels. Hea styles inlue a hex hea an Phillips flat hea. GENERAL APPLICATIONS AND USES 4 s Sreen Enlosures Exterior Metal Lighting or Fixtures 304 s Exterior Appliations Marine Appliations FEATURES AND BENEFITS Storm Shutters Light Duty Inustrial Appliations Foo an Beverage Failities Waste an Water Treatment Plants + Consistent performane in high an low strength onrete + rill bit size is the same as the anhor iameter + an be installe through stanar fixture holes + ID oe an ientifying marking stampe on hea of eah anhor + esign allows for follow-up expansion after setting uner tensile loaing APPROVALS AND LISTINGS Miami Dae County Notie of Aeptane (NOA) GUIDE SPECIFICATIONS CSI Divisions: Conrete ing, Masonry age an Metal Fastenings. Conrete Srew s shall be as supplie by Powers Fasteners, In., Brewster, NY. SECTION CONTENTS Page No. General Information... Installation Speifiations... 2 Material Speifiations... 2 Performane Data... 3 Design Criteria...5 Orering Information ANCHOR MATERIALS Type 4 ANCHOR SIZE RANGE (TYP.) 3/6 iameter x - to 2-3/4 length iameter x - to 6 length SUITABLE BASE MATERIALS Normal-Weight Conrete Strutural Lightweight Conrete Hollow Conrete Masonry (CMU Soli Brik Masonry Powers USA: (800) Canaa: (905) or (54)

2 installation speifiations 304, Dimension HEX PFH Drill Bit, bit () 3/6 3/6 Fixture Clearane Hole, h () 5/6 5/6 Threa (UNC) -4-4 Hea Height () 9/64 3/6 Hea With () 5/6 /2 O.D. Washer O.D., w () 3/32 N/A Washer Thikness, () /32 N/A Hex Driver () / Phillips Driver 3/8 #3 4, Dimension HEX PFH Drill Bit, bit () 3/6 3/6 Fixture Clearane Hole, h () 5/6 5/6 Threa (UNC) -4-4 Hea Height () 9/64 3/6 Hea With () 5/6 /2 O.D. Washer O.D., w () 3/32 N/A Washer Thikness, () /32 N/A Hex Driver () / Phillips Driver 3/8 #3 Installation Proeure Using the proper iameter bit, rill a hole into the base material to a epth of at least eeper than the embement require. The rill bit must be use. Blow the hole lean of ust an other material. Selet the installation tool an rive soket to be use. Insert the hea of the into the hex hea soket or Phillips hea river. Set the rill motor to the rotation only moe. Plae the point of the through the fixture into the pre-rille hole an rive the anhor in one steay ontinuous motion until it is fully seate at the proper embement. The river will automatially isengage from the hea of the. Material speifiations Component Boy Type 4 Coating/Plating/Finish Passivate Class 4 Sealoat (500 hour rating for ASTM B salt test unamage oating referene). For onsieration for exterior appliations please ontat Powers Fasteners. 2 Canaa: (905) or (54) Powers USA: (800)

3 Performane Data Capaities for Srew in Normal-Weight Conrete,2 Material Embement Depth Conrete Compressive Strength f = 2,500 psi (7.3 MPa) f = 3,000 psi (20.7 MPa) f = 4,000 psi (27.6 MPa) f = 6,000 psi (4.4 MPa) 3/6 (4.7) Type /4 500 (2.3) 855 (3.8),40 (5.),40 (5.),265 (5.7) 7/ (3.8),220 (5.5),520 (6.8) 220 (.0) 465 (2.0) 2,60 (9.7),265 (5.7) 865 (3.8),5 (5.0) 2,420 (.9) 700 (3.2),05 (4.6),580 (7.) 250 (2.9) 2,60 (9.7),320 (5.9),000 (4.4),285 (5.7) 2,420 (.9) 700 (3.2),320 (5.9),580 (7.),580 (7.). Tabulate loa values are for anhors installe in onrete. Conrete ompressive strength must be at the speifie minimum at the time of installation. 2. loa apaities must be reue by a minimum safety fator of 4.0 or greater to etermine allowable working loa. Consieration of safety fators of or higher may be neessary epening upon the appliation suh as life safety or overhea. Capaities for Srew in Normal-Weight Conrete,2, 2,60 (9.7) 2,420 (.9) Material Embement Depth Conrete Compressive Strength f = 2,500 psi (7.3 MPa) f = 3,000 psi (20.7 MPa) f = 4,000 psi (27.6 MPa) f = 6,000 psi (4.4 MPa) 3/6 (4.7) Type / (.0) (.6) / (.0) (.7) 55 (0.25) 5 (0.5) (2.4) (.8) (0.8) (.8) 64 (0.3) 35 (2.4) (.8) (0.8) (.8) (2.4) 605. loa apaities liste are alulate using an applie safety fator of 4.0. Consieration of safety fators of or higher may be neessary epening on the appliation, suh as life safety or overhea. 2. Critial an minimum spaing an ege istanes as well as reution fators for intermeiate spaing an ege istanes are liste in Design Criteria setion. Powers USA: (800) Canaa: (905) or (54)

4 Performane Data an Capaities for Srew in Strutural Lightweight Conrete,2,3 Material Embement Depth, lbs Conrete Compressive Strength (f ), lbs 3,000 psi (20.7 MPa) 4,000 psi (27.6 MPa) 5,000 psi (34.5 MPa) f ć 3,000 psi (20.7 MPa) 270 (.2) 70 (0.3) (0.3) (0.4) 520 (2.3) 30. Tabulate loa values are for anhors installe in strutuarl san-lightweight onrete. Conrete ompressive strength must be at the speifie minimum at the time of installation. 2. loa apaities liste are alulate using an applie safety fator of 4.0. Consieration of safety fators of or higher may be neessary epening upon the appliation suh as life safety or overhea. 3. Linear interpolation may be use to etermine allowable loas for intermeiate ompressive strengths. Capaities for Srew in Hollow Blok,2,3,4,5 Material Type 4 an Type 4 Embement Depth (25.4) - -3/4 Lightweight, Meium & Normal Weight CMU f ć 3,000 psi (3.8 MPa) (0.5) Tabulate loa values are for anhors installe in minimum 6-inh wie, minimum Grae N, Type II, lightweight, meium-weight or normal-weight onrete masonry units onforming to ASTM C 90. Mortar must be minimum Type N. Masonry ompressive strength must be at the speifie minimum at the time of installation (f m 2,000 psi). 2. loa apaities liste are alulate using an applie safety fator of The tabulate values are appliable for srew anhors installe at a ritial spaing between srew anhors of 6 times the srew anhor iameter. The srew anhors may be reue to a minimum spaing istane of 8 times the srew iameter provie the allowable loas are reue by 70 perent. Linear interpolation for allowable loas may be use for intermeiate spaing istanes. 4. The tabulate values are appliable for srew anhors installe at a minimum ege istane of 2 times the srew anhor iameter unless otherwise note. 5. The tabulate values are appliable for installations into the fae shell of the masonry member. The fae shell thikness must be able to aomoate the speifie embement epth. Masonry ells may be groute Capaities for Srew in BrikMasonry,2,3,4,5 Material Embement Depth Brik Masonry f ć,300 psi (9.0 MPa) Type 4 an Type 4 (25.4) - -3/ (.6) 345 (.6). Tabulate loa values are for anhors installe in multiple wythe, minimum Grae SW, soli lay brik masonry walls onforming to ASTM C 62. Mortar must be minimum Type N. Masonry ompressive strength must be at the speifie minimum at the time of installation (f m,300 psi). 2. loa apaities are alulate using an applie safety fator of Linear interpolation may be use to etermine allowable loa apaities for intermeiate embements. 4. The tabulate values are for anhors installe at a minimum ege an en istane of 4 inhes. 5. The tabulate values are for anhors installe at a minimum of 2 anhor iameters on enter for 0 perent apaity. Spaing istanes may be reue to 6 anhor iameters on enter provie the apaities are reue by 50 perent. Linear interpolation may be use for intermeiate spaing istanes. 4 Canaa: (905) or (54) Powers USA: (800)

5 esign riteria Combine ing For anhors loae in both shear an tension, the ombination of loas shoul be proportione as follows: Nu Vu ( Nn ) Vn ( ) + Where: Nu = Applie Servie Nn = Vu = Applie Servie Vn = Ajustment Fators for Spaing an Ege Distanes in Normal-Weight Conrete Dimension Type Critial Distane (Full Capaity) Critial Fator Distane (Reue Capaity) Fator Spaing (s) an s r = 2 F NS = F VS =.0 s min = 6 F NS = F VS = 0.50 Ege Distane () an r = 2 F NC = F VC =.0 min = 6 F NC = F VC = values, foun in the Performane Data Tables, are multiplie by the reution fators when spaing ege istanes are less than ritial istanes. Linear interpolation is allowe for spaing an ege istanes that fall between ritial an minimum istanes. When a group of anhors is affete by both reue spaing an ege istane, the spaing an ege istane reution fators must be ombine (multiplie). Spaing Reution Fators - (F NS ) Spaing, (FNS) & (F VS ) (in) 3/6 3/8 S r (in) /2 s min (in) -/8 2- -/ Spaing, s () / / /2.00 Spaing Reution Fators - (F NS ) Spaing, (FNS) & (F VS ) (in) 3/6 3/8 S r (in) /2 s min (in) -/8 2- -/ Spaing, s () / / /2.00 Notes: For anhors loae in tension an shear, the ritial ege istane (s r) is equal to 2 anhor iameters (2) at whih the anhor ahieves 0% of loa. ege istane (s min) is equal to 6 anhor iameters (6) at whih the anhor ahieves 50% of loa. Notes: For anhors loae in tension an shear, the ritial ege istane ( r) is equal to 2 anhor iameters (2) at whih the anhor ahieves 0% of loa. ege istane ( min) is equal to 6 anhor iameters (6) at whih the anhor ahieves 50% of loa. Powers USA: (800) Canaa: (905) or (54)

6 orering information Hex hea anhors are measure from below the washer while flat hea anhors are measure en to en. To selet the proper minimum anhor length, etermine the embement epth require to obtain the esire loa apaity. Then a the thikness of the fixture, inluing any spaers or shims, to the embement epth. Do not selet a length that will result in an embement into the base material whih is greater than 3/4 to 2. Most onrete srew anhors annot be properly riven to a epth of more than 2, espeially in enser base materials., Hex Hea & Flat Hea Drill Bit Referene Box Carton 0 HEX PFH Straight SDS HEX x x -3/ / x x 2-3/ / One rill bit is pakage in eah box of s. Type 4, Hex Hea & Flat Hea Drill Bit Referene Box Carton 0 HEX PFH Straight SDS HEX /6 x /6 x -3/ / /6 x /6 x 2-3/ / x -3/ / x -3/ / x / x 2-3/ / x / x 3-3/ / x / x / x / One rill bit is pakage in eah box of s. 6 Canaa: (905) or (54) Powers USA: (800)

orering information Carbie Drill Bits for 4 (Do not use with ) Straight Shank 278 5/32 x 3-/2 2782 5/32 x 4-/2 0.68-0.75 3 2 2783 5/32 x 5-/2 4 2785 3/6 x 3-/2 2 2786 3/6 x 4-/2 3 2787 3/6 x 5-/2 0.

7 orering information Carbie Drill Bits for 4 (Do not use with ) Straight Shank 278 5/32 x 3-/ /32 x 4-/ /32 x 5-/ /6 x 3-/ /6 x 4-/ /6 x 5-/ / /6 x 6-/2 5 / /6 x 7-/2 6 /2 Hex Shank SDS-Plus /32 x /32 x /6 x /6 x 7 5 Carbie Drill Bits for Straight Shank /6 x 3-/ /6 x 7 5 Hex Shank SDS-Plus /6 x Installation Tool for Desription Max Srew Max. Bit Tool Kit 4 5-/2 3/ SDS Extension (8 ) 6 7-/2 /2 Eah 203 Powers Fasteners, In. All Rights Reserve. is a Registere Traemark of Powers Fasteners, In. For the most urrent information please visit Powers USA: (800) Canaa: (905) or (54)

Power-Bolt PRODUCT INFORMATION. Heavy-Duty Sleeve Anchor PRODUCT DESCRIPTION FEATURES AND BENEFITS. Hex Head Power-Bolt Assembly

Power-Bolt PRODUCT INFORMATION. Heavy-Duty Sleeve Anchor PRODUCT DESCRIPTION FEATURES AND BENEFITS. Hex Head Power-Bolt Assembly Power-Bolt Heavy-Duty Sleeve PRODUCT DESCRIPTION The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable. It is available with a finishe hex hea