SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Magdalene Perry
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 8: The storage and handling of corrosive substances Warning Can only be used in conjunction with SANS
2 Table of changes Change No Date Scope Amdt Amended to correct cross-referencing, and to update referenced standards Foreword This South African standard was approved by National Committee SABS SC 1060D, National committee for standards for dangerous goods including hazardous chemical substances and dangerous goods waste Storage: Design and operation, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement This document was published in June 2012 This document supersedes SANS :2010 (edition 1) This document can only be used in conjunction with SANS A vertical line in the margin shows where the text has been technically modified by amendment No 1 Reference is made in the note to 1(b) to the relevant national legislation In South Africa this means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993) and the Hazardous Substances Act, 1973 (Act No 15 of 1973) Reference is made in 1(f) and 5341 to the relevant national legislation In South Africa this means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993) Amdt 1 Reference is made in 5344 to the relevant national regulation In South Africa this means Part T of the National Building Regulations and Building Standards Act, 1977 (Act No 103 of 1977) Reference is made in 5611 to the relevant national legislation In South Africa this means the National Environmental Management Act, 1998 (Act No 107 of 1998) and the Hazardous Substances Act, 1973 (Act No 15 of 1973) Reference is made in the note to 5631 to the relevant national legislation In South Africa this means the National Environmental Management: Waste Act, 2008 (Act No 59 of 2008) and the National Environmental Management Act, 1998 (Act No 107 of 1998) SANS consists of the following parts, under the general title The warehousing of dangerous goods: Part 0: General requirements Part 2: The storage and handling of gas cylinders Part 5: The storage and handling of oxidizing substances Part 8: The storage and handling of corrosive substances
3 Contents Page Foreword 1 Scope 3 2 Normative references 3 3 Definitions 4 4 General 6 41 Application of this part of SANS Classification of corrosive substances 6 5 Requirements 7 51 Warning notices, symbolic safety signs and product labels General Warning notices Symbolic safety signs Product labels 8 52 Storage configuration General Storage surfaces Ventilation Separation of incompatible substances Exposure to heat and sunlight Product catchment and containment 9 53 The responsibilities of the warehouse controller or retail manager General Job knowledge Training Hygiene and personal safety Fire protection Housekeeping Waste collection, storage and disposal General Storage of waste Items for disposal Spill management Methods of disposal 13 Bibliography 14 1
4 This page is intentionally left blank 2
5 The warehousing of dangerous goods Part 8: The storage and handling of corrosive substances 1 Scope This part of SANS specifies requirements for the safe storage and handling of corrosive substances of class 8, as defined in SANS in excess of the exempt quantity and their associated subsidiary risks, in locations that are generally industrial, commercial and retail The standard does not apply to a) the storage and handling of corrosive substances for domestic use in residential premises or for own use on farms; NOTE This exemption does not apply to home-based industries using corrosives b) laboratories; NOTE This exemption does not provide for any exemption from the use of fume cabinets or any other safe working practice as may be required by the relevant national legislation (see foreword) c) the storage of corrosive substances in container sizes that exceed a capacity of 50 kg or 50 L, is dealt with in terms of SANS ; d) dangerous goods that have a class 8 subsidiary risk, as defined in SANS 10228; e) manufacturing, production or decanting facilities; NOTE This part of SANS is applicable to storage facilities used for the storage of packaged corrosives associated with such manufacturing, production or decanting facilities f) facilities designated as major hazard installations (MHI) in terms of the relevant national legislation (see foreword) All the requirements of SANS are deemed to be applicable mutatis mutandis in this part of SANS unless otherwise stated 2 Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31232-9 SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 Edition 31 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with the U.S.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31185-8 SOUTH AFRICAN NATIONAL STANDARD Energy performance certificates for buildings WARNING This document references other documents normatively. Published by SABS Standards Division 1
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25315-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32353-0 SOUTH AFRICAN NATIONAL STANDARD Concrete roofing tiles WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD. Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use
ISBN 978-0-626-30862-9 SOUTH AFRICAN NATIONAL STANDARD Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use WARNING This document references other documents
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32577-0 SOUTH AFRICAN NATIONAL STANDARD The design and installation of earth electrodes WARNING This document references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29571-4 SOUTH AFRICAN NATIONAL STANDARD Aloe raw material WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
Edition 2 WARNING. Tel: +27 SABSS
ISBN 978-0-626-31091-2 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 2-2: Requirements for systemic engineering and operational safety standards Track and associated civil infrastructure
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25219-9 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part S: Facilities for persons with disabilities Published by SABS Standards Division 1 Dr Lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25161-1 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part O: Lighting and ventilation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30514-7 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods by road Operational requirements WARNING This document references other documents normatively. Table of changes Change
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25162-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part W: Fire installation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30508-6 SOUTH AFRICAN NATIONAL STANDARD Bottled water of subterranean origin WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32306-6 SOUTH AFRICAN NATIONAL STANDARD Prestressed concrete pipes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26264-8 SOUTH AFRICAN NATIONAL STANDARD Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25224-3 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27074-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CC1: Concrete works (structural) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31224-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part AS1: Making of asphalt briquettes for Marshall tests and other specialized tests WARNING This document references
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31190-2 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR54: Determination of the indirect tensile strength of compacted and cured specimens of cementitiously stabilized
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26403-1 SOUTH AFRICAN NATIONAL STANDARD Energy efficiency in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31441-5 SOUTH AFRICAN NATIONAL STANDARD Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 3: PVC Distribution cables WARNING
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28157-1 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29240-9 SOUTH AFRICAN NATIONAL STANDARD The application of fumigants Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28156-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR1: Wet preparation and particle size analysis Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34239-5 SOUTH AFRICAN NATIONAL STANDARD Electric welded low carbon steel pipes for aqueous fluids (large bore) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33574-8 SOUTH AFRICAN NATIONAL STANDARD Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26737-7 SOUTH AFRICAN NATIONAL STANDARD Fire testing of materials, components and elements used in buildings Part 5: Non-combustibility at 750 C of building materials Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24787-4 SOUTH AFRICAN NATIONAL STANDARD Hexagonal steel wire mesh gabions and revet mattresses Amdt 2 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32329-5 SOUTH AFRICAN NATIONAL STANDARD Firefighting equipment Part 1: Components of underground and above-ground hydrant systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28259-2 SOUTH AFRICAN NATIONAL STANDARD Concrete masonry construction Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25452-0 SOUTH AFRICAN NATIONAL STANDARD Ceramic wall and floor tiles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26268-6 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CS1: Structural steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-626-28724-5 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR50: Preparation, compaction and curing of specimens of laboratory mixed cementitiously stabilized materials Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28723-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR40: Determination of the California bearing ratio Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26989-0 SOUTH AFRICAN NATIONAL STANDARD Concrete floors Part 1: Bases to concrete floors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19416-1 SOUTH AFRICAN NATIONAL STANDARD Requirements for a Hazard Analysis and Critical Control Point (HACCP) system Published by Standards South Africa 1 dr lategan road groenkloof private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31226-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR31: Determination of the maximum dry density and optimum moisture content of laboratory mixed cementitiously
SOUTH AFRICAN NATIONAL STANDARD
HIS IS AN EXRAC FROM HE NAIONAL SANDARD ISBN 978-0-626-19313-3 SOUH AFRICAN NAIONAL SANDARD ransport of dangerous goods Emergency information systems Part 1: Emergency information system for road transport
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26422-2 SOUTH AFRICAN NATIONAL STANDARD Processed meat products Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31527-6 SOUTH AFRICAN NATIONAL STANDARD Welding of thermoplastics Testing and approval of welders WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31245-9 SOUTH AFRICAN NATIONAL STANDARD Drinking water Part 2: Application of SANS 241-1 WARNING This document references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34187-9 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1-1: Low-voltage installation in medical locations WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 Edition 43 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33868-8 SOUTH AFRICAN NATIONAL STANDARD Cast iron surface boxes and manhole and inspection covers and frames Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20611-6 SOUTH AFRICAN NATIONAL STANDARD The structural use of masonry Part 2: Structural design and requirements for reinforced and prestressed masonry WARNING To be used in conjunction
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27369-9 SOUTH AFRICAN NATIONAL STANDARD Light steel frame building Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26351-5 SOUTH AFRICAN NATIONAL STANDARD The production of mageu Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27272-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CM1: Masonry walling Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel:
SOUTH AFRICAN NATIONAL STANDARD
ICS 1.060.20 ISBN 0-626-14124-9 Edition 1.1 Any reference to SABS 1862 is deemed to be a reference to this standard (Government Notice No. 17 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Packaged
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26430-7 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 3: Wind actions WARNING Can only be used in conjunction with SANS
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31402-6 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards South Africa
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23029-6 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Packaging and large packaging for road and rail transport Part 1: Packaging Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31443-9 SOUTH AFRICAN NATIONAL STANDARD School furniture Amdt 6 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33589-2 SOUTH AFRICAN NATIONAL STANDARD Bed bases (spring upholstered) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25597-8 SOUTH AFRICAN NATIONAL STANDARD The structural use of steel Part 1: Limit-states design of hot-rolled steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34816-8 ISO 14021:2016 SOUTH AFRICAN NATIONAL STANDARD Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling) This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ICS 11.020;13.030.30 ISBN 0-626-14901-0 SOUTH AFRICAN NATIONAL STANDARD Management of healthcare waste Published by Standards South Africa 1 dr lategan road groenkloof! private bag x191 pretoria 0001 tel:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24814-7 SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 1: Artificial lighting of interiors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29190-7 SOUTH AFRICAN NATIONAL STANDARD Water Dissolved solids content Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21901-7 SOUTH AFRICAN NATIONAL STANDARD Plywood and composite board Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34747-5 Any reference to SABS SM 1295 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Lime tests Carbon dioxide
KENYA STANDARD KS : The warehousing of dangerous goods Part3: The storage and handling of Corrosive substances
KENYA STANDARD KS 2383-3: 2016 The warehousing of dangerous goods Part3: The storage and handling of Corrosive substances KEBS 2016 First Edition 2016 TECHNICAL COMMITTEE REPRESENTATION The following organizations
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26428-4 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 1: Basis of structural design Published by SABS Standards Division
RepublicofSouthAfrica
RepublicofSouthAfrica EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticeforal, abeterinformedcitizenry,theruleoflaw,worldtradeandworldpeace, thislegaldocumentisherebymadeavailableonanoncommercialbasis,asit
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34399-6 ISO 28001:2007 SOUTH AFRICAN NATIONAL STANDARD Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27556-3 SOUTH AFRICAN NATIONAL STANDARD Standard for standards Part 1: The development of South African National Standards Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.060.10; 93.020 ISBN 0-626-14801-4 SOUTH AFRICAN NATIONAL STANDARD Development, maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30933-6 Any reference to SABS SM 1257 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Microbiological examination
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34802-1 Edition 3.1 IEC 60439-1:2004 Any reference to SABS IEC 60439-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36621-6 ISO 45001:2018 SOUTH AFRICAN NATIONAL STANDARD Occupational health and safety management systems Requirements with guidance for use This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ICS 91.220 ISBN 0-626-15672-6 SOUTH AFRICAN NATIONAL STANDARD The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding Published by Standards South Africa 1 dr lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26623-3 SOUTH AFRICAN NATIONAL STANDARD Construction and management requirements for works contracts Part 2: Accommodation of traffic on public roads occupied by the contractor Published
South African Bureau of Standards. National Norm for the development of South African National Standards
ISBN 978-0-626-34155-8 South African Bureau of Standards National Norm for the development of South African National Standards WARNING This document references other documents normatively. Published by
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62775 Edition 1.0 2016-05 colour inside Application guidelines Technical and financial processes for implementing asset management systems INTERNATIONAL ELECTROTECHNICAL
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21491-3 Any reference to SABS 200 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Copper alloy ingots and castings
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27661-4 SOUTH AFRICAN NATIONAL STANDARD Construction and management requirements for works contracts Part 1: General engineering and construction works Published by SABS Standards Division
CONSOLIDATED VERSION IEC Medical device software Software life cycle processes. colour inside. Edition
IEC 62304 CONSOLIDATED VERSION Edition 1.1 2015-06 colour inside Medical device software life cycle processes INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 11.040 ISBN 978-2-8322-2765-7 Warning! Make sure
SABS 0286:1998. Mine residue. Code of practice ICS ISBN Licensed exclusively to SABS. Copying and network storage prohibited.
ICS 73.020 ISBN 0-626-11700-3 SABS 0286:1998 First edition Code of practice Mine residue Published by THE SOUTH AFRICAN BUREAU OF STANDARDS Gr 19 Amendments issued since publication Amdt No. Date Text
Australian Standard. The storage and handling of flammable and combustible liquids AS (Incorporating Amendment Nos 1 and 2) AS
AS 1940 2004 (Incorporating Amendment Nos 1 and 2) AS 1940 2004 Australian Standard The storage and handling of flammable and combustible liquids This Australian Standard was prepared by Committee ME-017,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30730-1 ISO/IEC TR 20000-4:2010 SOUTH AFRICAN NATIONAL STANDARD Information technology Service management Part 4: Process reference model This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36238-6 Edition 1 and EN amdt 1, nat. amdt 1 EN 795:1996 Edition 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Protection against falls from a height Anchor devices Requirements and testing
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 63049 Edition 1.0 2017-09 Terrestrial photovoltaic (PV) systems Guidelines for effective quality assurance in PV systems installation, operation and maintenance INTERNATIONAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62561-2 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
Information technology Security techniques Information security management systems Requirements
INTERNATIONAL STANDARD ISO/IEC 27001 Second edition 2013-10-01 Information technology Security techniques Information security management systems Requirements Technologies de l information Techniques de
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 22002-6 First edition 2016-04-15 Prerequisite programmes on food safety Part 6: Feed and animal food production Programmes prérequis pour la sécurité des denrées alimentaires
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24018-9 SANS 11014:2010 ISO 11014:2009 SOUTH AFRICAN NATIONAL STANDARD Safety data sheet for chemical products Content and order of sections This national standard is the identical implementation
Australian/New Zealand Standard
AS/NZS 4681:2000 (Incorporating Amendment No. 1) AS/NZS 4681 Australian/New Zealand Standard The storage and handling of Class 9 (miscellaneous) dangerous goods and articles AS/NZS 4681:2000 This Joint
ISO Stationary source emissions Manual method for the determination of the methane concentration using gas chromatography
INTERNATIONAL STANDARD ISO 25139 First edition 2011-04-15 Stationary source emissions Manual method for the determination of the methane concentration using gas chromatography Émissions de sources fixes
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27471-9 Any reference to SABS SM 862-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Concrete tests Consistence
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13216-2 First edition 2004-12-01 Corrected version 2005-03-15 Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62873-3-3 Edition 1.0 2016-09 Residual current operated circuit-breakers for household and similar use Part 3-3: Specific requirements for RCDs with screw-type terminals for
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36205-8 ISO 4386-3:1992 SOUTH AFRICAN NATIONAL STANDARD Plain bearings Metallic multilayer plain bearings Part 3: Non-destructive penetrant testing This national standard is the identical
This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
QC 080000 Edition 4.0 2017-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management (HSPM) System Requirements INTERNATIONAL ELECTROTECHNICAL
Engineering Recommendation G39 Issue
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Engineering Recommendation G39 Model code of practice covering electrical safety in the planning, installation, commissioning and maintenance
ISO INTERNATIONAL STANDARD. Water quality Determination of chronic toxicity to Ceriodaphnia dubia
INTERNATIONAL STANDARD ISO 20665 First edition 2008-12-15 Water quality Determination of chronic toxicity to Ceriodaphnia dubia Qualité de l'eau Détermination de la toxicité chronique vis-à-vis de Ceriodaphnia