SOUTH AFRICAN NATIONAL STANDARD
|
|
- Gerard Wade
- 5 years ago
- Views:
Transcription
1 ICS ISBN SOUTH AFRICAN NATIONAL STANDARD The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: fax: international code Standards South Africa
2 Table of changes Change No. Date Scope Amdt Amended to delete a referenced standard and to correct crossreferences. Abstract Covers steel access scaffolding commonly used for supporting workers and materials, plant or equipment during construction, maintenance and demolition work. Keywords access equipment, birdcage scaffolds, classification systems, construction, construction equipment, design, erecting (construction operation), foundations, inspection, instructions for use, putlog scaffolds, safety measures, scaffolding components, scaffolds, steels, suspended scaffolds, temporary structures, tower scaffolds. Foreword This South African standard was approved by National Committee StanSA TC , Access equipment, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This edition cancels and replaces edition 1 (SANS :2003). A vertical line in the margin shows where the text has been modified by amendment No. 1. Annex B forms an integral part of this standard. Annexes A and C are for information only. Introduction This part of SANS has been prepared to define procedures for the design and erection of access scaffolding, including appropriate training, user responsibilities and control of scaffolding operations. Apart from provisions for the more orthodox forms of scaffolding, provisions are included for prefabricated systems. Procedures are also given for the inspection, care and maintenance of scaffolding. However efficient the individual components of a scaffolding system may be, it is of little avail if the construction of the scaffolding is inefficient. Persons erecting scaffolding should therefore be able to ensure that, at the time of handing over to the user, the scaffolding is adequate for its intended purpose. Effective training of personnel who erect and use scaffolding is possibly the most essential factor in preventing accidents amongst both those who erect scaffolding and those who use it. Furthermore, a quality system should be applied by competent personnel to facilitate the safe erection and use of scaffolding (see the SANS 9000/ISO 9000 series of standards).
3 Contents Abstract Keywords Foreword Introduction 1 Scope Normative references Definitions Basic materials Timber Steel Aluminium Plastics Components Couplers Joint pins (expanding spigot couplers) Baseplates Soleboards Base jacks Cross-braces (for walk-through frames) Flip locks (for walk-through frames) Hop-up brackets Scaffold boards Standards and tubes Ladders Wheels and castors Steel beams for outrigger scaffolding Chains, ropes and fasteners General Chains Cables and ropes Nails Bolts and nuts Fishplates, set-screws and ferrules Height restrictions, classification, usage and safety factors Height restrictions Classification Safety factors
4 Contents (continued) 8 Foundations for scaffolding General Particular considerations Existing structures Normal foundations Design requirements for access scaffolding Safe working load Scaffolding of heights greater than 60 m high Scaffolding less than 60 m high Erection of scaffolding General Standards Ledgers Transoms and putlogs Bracing and ties Boarding Ladders Staircases Outrigger (cantilever beam) scaffolding Tubular steel independent tied (tube-and-fitting) scaffolding Tubular steel frame scaffolding Tubular steel system scaffolding Putlog (single) scaffolding Mobile tower scaffolding Birdcage scaffolding Trestle scaffolding Roof scaffolding Scaffolding ramps Working platforms Pavement gantries Aprons (fans) Cantilever off-loading platforms Hoist tower scaffolding Safety precautions General Construction Materials and tools Maintenance and housekeeping Personal safety Safety signs Outrigger scaffolding Mobile tower scaffolds Frame scaffolding System scaffolding Inspection
5 Contents (concluded) 13 Maintenance and storage Maintenance Storage Control of scaffolding operations Establishing scaffolding requirements Site visit Written confirmation Supply and erection of scaffolding Inspection of the scaffolding Handover of the scaffold Responsibilities of the scaffold user Ensuring scaffold safety Prohibition on alterations to the scaffold by users Co-operation with other users Emergency procedures Safe work procedure for a scaffold where ties have to be removed Training requirements for scaffolding personnel General Training and experience requirements Accreditation Figures Annex A (informative) Example of scaffolding design calculations Annex B (normative) Basic checklist for scaffold inspections Annex C (informative) Typical format for scaffold inspection register Bibliography
SOUTH AFRICAN NATIONAL STANDARD
ICS 91.220 ISBN 0-626-15672-6 SOUTH AFRICAN NATIONAL STANDARD The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding Published by Standards South Africa 1 dr lategan
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27369-9 SOUTH AFRICAN NATIONAL STANDARD Light steel frame building Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 91.090 ISBN 0-626-15809-5 SANS 301-12:2004 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Fences Part 12: Specification for steel palisade fences This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24787-4 SOUTH AFRICAN NATIONAL STANDARD Hexagonal steel wire mesh gabions and revet mattresses Amdt 2 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20611-6 SOUTH AFRICAN NATIONAL STANDARD The structural use of masonry Part 2: Structural design and requirements for reinforced and prestressed masonry WARNING To be used in conjunction
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31185-8 SOUTH AFRICAN NATIONAL STANDARD Energy performance certificates for buildings WARNING This document references other documents normatively. Published by SABS Standards Division 1
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards South Africa
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28157-1 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19416-1 SOUTH AFRICAN NATIONAL STANDARD Requirements for a Hazard Analysis and Critical Control Point (HACCP) system Published by Standards South Africa 1 dr lategan road groenkloof private
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26268-6 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CS1: Structural steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27074-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CC1: Concrete works (structural) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25315-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias Published by SABS Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32353-0 SOUTH AFRICAN NATIONAL STANDARD Concrete roofing tiles WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34239-5 SOUTH AFRICAN NATIONAL STANDARD Electric welded low carbon steel pipes for aqueous fluids (large bore) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25452-0 SOUTH AFRICAN NATIONAL STANDARD Ceramic wall and floor tiles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 1.060.20 ISBN 0-626-14124-9 Edition 1.1 Any reference to SABS 1862 is deemed to be a reference to this standard (Government Notice No. 17 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Packaged
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32577-0 SOUTH AFRICAN NATIONAL STANDARD The design and installation of earth electrodes WARNING This document references other documents normatively. Published by SABS Standards Division
More informationSOUTH AFRICAN NATIONAL STANDARD. Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use
ISBN 978-0-626-30862-9 SOUTH AFRICAN NATIONAL STANDARD Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use WARNING This document references other documents
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31441-5 SOUTH AFRICAN NATIONAL STANDARD Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 3: PVC Distribution cables WARNING
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32306-6 SOUTH AFRICAN NATIONAL STANDARD Prestressed concrete pipes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25597-8 SOUTH AFRICAN NATIONAL STANDARD The structural use of steel Part 1: Limit-states design of hot-rolled steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31232-9 SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders WARNING This document references other documents normatively.
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 Edition 43 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27272-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CM1: Masonry walling Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33868-8 SOUTH AFRICAN NATIONAL STANDARD Cast iron surface boxes and manhole and inspection covers and frames Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28259-2 SOUTH AFRICAN NATIONAL STANDARD Concrete masonry construction Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationBASIC SCAFFOLDING KNOWLEDGE QUESTIONS
Garnsworthy Square 46, 62 & 64 Garnsworthy St Springvale rth Victoria 3171 Updated on 22/02/08 STC105 Name BASIC SCAFFOLDING KNOWLEDGE QUESTIONS THE PROFESSIONAL Scaffold Tools Scaffold Belts Couplers
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32329-5 SOUTH AFRICAN NATIONAL STANDARD Firefighting equipment Part 1: Components of underground and above-ground hydrant systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25161-1 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part O: Lighting and ventilation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31443-9 SOUTH AFRICAN NATIONAL STANDARD School furniture Amdt 6 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-626-28724-5 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR50: Preparation, compaction and curing of specimens of laboratory mixed cementitiously stabilized materials Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31190-2 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR54: Determination of the indirect tensile strength of compacted and cured specimens of cementitiously stabilized
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 67.020 ISBN 0-626-17620-4 SANS 22000:2005 ISO 22000:2005 SOUTH AFRICAN NATIONAL STANDARD Food safety management systems Requirements for any organization in the food chain This national standard is
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33589-2 SOUTH AFRICAN NATIONAL STANDARD Bed bases (spring upholstered) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25224-3 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings Published by SABS Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31224-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part AS1: Making of asphalt briquettes for Marshall tests and other specialized tests WARNING This document references
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26427-7 SOUTH AFRICAN NATIONAL STANDARD The installation of glazing in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27
More informationSince it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one
access scaffolding Since it was established in 1989, with a small manufacturing base in Qwa Qwa, Uni-Span has grown to become one of the major players in the scaffolding and formwork industry in South
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31402-6 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts WARNING This document references other documents normatively.
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27556-3 SOUTH AFRICAN NATIONAL STANDARD Standard for standards Part 1: The development of South African National Standards Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28723-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR40: Determination of the California bearing ratio Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26989-0 SOUTH AFRICAN NATIONAL STANDARD Concrete floors Part 1: Bases to concrete floors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 11.020;13.030.30 ISBN 0-626-14901-0 SOUTH AFRICAN NATIONAL STANDARD Management of healthcare waste Published by Standards South Africa 1 dr lategan road groenkloof! private bag x191 pretoria 0001 tel:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26264-8 SOUTH AFRICAN NATIONAL STANDARD Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33574-8 SOUTH AFRICAN NATIONAL STANDARD Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29571-4 SOUTH AFRICAN NATIONAL STANDARD Aloe raw material WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28156-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR1: Wet preparation and particle size analysis Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26403-1 SOUTH AFRICAN NATIONAL STANDARD Energy efficiency in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationReliant Holdings Ltd Safety Management System
Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to prevent injuries due to falls from elevated work areas and ensure employees
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 13.060.10; 93.020 ISBN 0-626-14801-4 SOUTH AFRICAN NATIONAL STANDARD Development, maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes Published by Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25219-9 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part S: Facilities for persons with disabilities Published by SABS Standards Division 1 Dr Lategan
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26428-4 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 1: Basis of structural design Published by SABS Standards Division
More informationRolling Towers. Layher Uni Light Tower Instructions for Assembly and Use. Mobile working platforms according to DIN EN 1004:
Instructions for ssembly and Use Mobile working platforms according to DIN EN 00:00-03 Working platform 0.7 x.8 m max. working height: indoors.3 m outdoors.3 m Rolling Towers Load bearing capacity.0 kn/m
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26351-5 SOUTH AFRICAN NATIONAL STANDARD The production of mageu Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31527-6 SOUTH AFRICAN NATIONAL STANDARD Welding of thermoplastics Testing and approval of welders WARNING This document references other documents normatively. Published by SABS Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25162-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part W: Fire installation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26430-7 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 3: Wind actions WARNING Can only be used in conjunction with SANS
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31226-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR31: Determination of the maximum dry density and optimum moisture content of laboratory mixed cementitiously
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21901-7 SOUTH AFRICAN NATIONAL STANDARD Plywood and composite board Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationAustralian/New Zealand Standard
AS/NZS 1576.6 Australian/New Zealand Standard Scaffolding Part 6: Metal tube-and-coupler scaffolding Deemed to comply with AS/NZS 1576.3 This Joint Australian/New Zealand Standard was prepared by Joint
More informationConstruction Safety Education Forum. 6 March Scaffolding. Dimitri Barlas, State Coordinator Construction Work Health and Safety Division DRAFT
Construction Safety Education Forum 6 March 2013 Scaffolding Dimitri Barlas, State Coordinator Construction Work Health and Safety Division DRAFT SRWSD in confidence 1 Presentation Outline Introduction
More informationdistribution Modular Scaffolding
Modular Scaffolding Modular scaffolding PDM Universal scaffolding system plettac-pl PDM Application A characteristic feature of plettac PDM system is the use of wedge joint which provides quick and safe
More informationNEBOSH International Certificate in Construction Safety and Health Unit ICC1 MANAGING AND CONTROLLING HAZARDS IN INTERNATINAL CONSTRUCTION ACTIVITIES
NEBOSH International Certificate in Construction Safety and Health Unit ICC1 MANAGING AND CONTROLLING HAZARDS IN INTERNATINAL CONSTRUCTION ACTIVITIES element 10: WORKING AT HEIGHT - HAZARDS AND RISK CONTROL
More informationLayher. Aluminium Rolling Towers. Layher SuperKlaxTower. Instructions for Assembly and Use
Mobile access and working towers in accordance with: HD 1004; DIN 4422, Part 1 (Version 8/92) Working platform 2.8 x 2.8 m and 2.8 x 1.95 m Max. working height: in closed rooms 13.95 m, outdoors 10.0 m
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 Edition 31 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with
More informationRolling Towers. Layher Rolling Towers Uni Wide. Safety Structure Instructions for Assembly and Use. Mobile working platforms to DIN EN 1004:
Layher Rolling Towers Uni Wide Safety Structure Instructions for Assembly and Use Mobile working platforms to DIN EN 1004:2005-03 Working platform 1.5 x 2.85 m Rolling Towers max. working height: indoors
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with the U.S.
More informationPLETTAC METRIX USER GUIDE
PLETTAC USER GUIDE Providing quality products and services at a competitive price. Valid Only For Genuine Equipment DISCLAIMER: Whilst TRAD Hire & Sales Ltd and the author have made every reasonable effort
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31245-9 SOUTH AFRICAN NATIONAL STANDARD Drinking water Part 2: Application of SANS 241-1 WARNING This document references other documents normatively. Published by SABS Standards Division
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27661-4 SOUTH AFRICAN NATIONAL STANDARD Construction and management requirements for works contracts Part 1: General engineering and construction works Published by SABS Standards Division
More informationARP 22399:2008 Edition 1 ISO/PAS 22399:2007 Edition 1
ISBN 978-0-626-21571-2 ISO/PAS 22399:2007 STANDARDS SOUTH AFRICA Recommended practice Societal security Guideline for incident preparedness and operational continuity management This recommended practice
More informationMultidirectional_scaffolding MP
Multidirectional_scaffolding MP 162 Company Projects Products Scaffoldings and Coverings MP MULTIDIRECTIONAL SCAFFOLDING The MP multidirectional system is the modern solution that reflects in an industrialized
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12811-1:2004 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design Temporary works equipment - Part 1: Scaffolds - Performance requirements and
More informationUSER S MANUAL HAKI PUBLIC ACCESS STAIR
USER S MANUAL HAKI PUBLIC ACCESS STAIR HAKI AB 2017 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationSafety Documents > Safety Manual > Scaffolds
Safety Documents > Safety Manual > Scaffolds D. Scaffolds 1. General Requirements for All Scaffolds a. Scaffolds shall be furnished and erected in accordance with this standard for persons engaged in work
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26737-7 SOUTH AFRICAN NATIONAL STANDARD Fire testing of materials, components and elements used in buildings Part 5: Non-combustibility at 750 C of building materials Published by SABS Standards
More informationSCAFFOLDING PROCEDURE
SCAFFOLDING PROCEDURE 1 Table of Contents 1 PURPOSE... 3 2 PROGRAM COMPLIANCE... 3 3 SCOPE... 3 4 DEFINITIONS... 3 5 RESPONSIBILITES... 4 6 SCAFFOLD INSPECTION... 5 7 SCAFFOLD USE... 5 8 SCAFFOLD REQUIREMENTS...
More informationConfiguration. User Guide. Version: Copyright 2017 Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES
Configuration User Guide Version: 2018.0 Copyright 2017 Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Create a new project... 2 Open the configuration...
More informationUSER S MANUAL HAKI PUBLIC ACCESS STAIR
USER S MANUAL HAKI PUBLIC ACCESS STAIR HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationSales Hire Erections
LTD www.scafhire.ie Sales Hire Erections Scaffolding Specialists Company History Since its modest inception in 1980 Scafhire Ltd has progressed to a position of very high prominecnce and respectability
More informationTRAD HIRE & SALES SCAFFOLDING SUPPLIER USER GUIDE PLETTAC METRIX FOCUSSED ON SERVICE
TRAD HIRE & SALES SCAFFOLDING SUPPLIER PLETTAC USER GUIDE FOCUSSED ON SERVICE DISCLAIMER: Whilst TRAD Hire & Sales Ltd and the author have made every reasonable effort to ensure that the information contained
More informationBSI British Standards
BS 1139-2.2:2009 BSI British Standards Metal scaffolding Part 2: Couplers Section 2.2: Aluminium couplers and special couplers in steel Requirements and test methods NO COPYING WITHOUT BSI PERMISSION EXCEPT
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29190-7 SOUTH AFRICAN NATIONAL STANDARD Water Dissolved solids content Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationSouth African Bureau of Standards. National Norm for the development of South African National Standards
ISBN 978-0-626-34155-8 South African Bureau of Standards National Norm for the development of South African National Standards WARNING This document references other documents normatively. Published by
More informationHEAVY DUTY ALUMINIUM MOBILE TOWERS. PLATFORM SIZE (Length x Width)
Product Guide Introduction Lightweight yet heavy duty (675kg) aluminium scaffolding reshaping the way you build. Versatile, safer and stronger scaffolding gives you the fortitude and stability you need
More informationUSER S MANUAL HAKI COMPACT STAIR TOWER
USER S MANUAL HAKI COMPACT STAIR TOWER HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24814-7 SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 1: Artificial lighting of interiors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
More informationDEPAUL UNIVERSITY. Scaffolding Program. Environmental Health & Safety. April 2017
DEPAUL UNIVERSITY Scaffolding Program Environmental Health & Safety April 2017 1 TABLE OF CONTENTS SECTION PAGE NO. 1.0 PURPOSE 2 2.0 SCOPE 2 3.0 SCAFFOLDING ERECTOR 2 4.0 GENERAL 2 5.0 WOOD SCAFFOLDING
More informationEdition 2 WARNING. Tel: +27 SABSS
ISBN 978-0-626-31091-2 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 2-2: Requirements for systemic engineering and operational safety standards Track and associated civil infrastructure
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29240-9 SOUTH AFRICAN NATIONAL STANDARD The application of fumigants Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
More informationScaffolding Glossary of Terms A
Scaffolding Glossary of Terms A ACCESS PLATFORM: A platform that gives access to and from places of work to persons, materials and equipment. ACCESSORY: A fitting that is able to be attached to a structural
More informationUSER S MANUAL HAKI COMPACT STAIR TOWER
USER S MANUAL HAKI COMPACT STAIR TOWER HAKI AB 2018 Important information HAKI s product liability and user s manuals apply only to scaffolds that are entirely composed of components that have been made
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30508-6 SOUTH AFRICAN NATIONAL STANDARD Bottled water of subterranean origin WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan
More informationscaffoldings/ coverings
scaffoldings/ coverings 198 MDS 222 temporary covers Scaffoldings / Coverings 197 SCAFFOLDINGS / COVERINGS MDS MDS multidirectional scaffolding The MDS multidirectional scaffolding is the modern solution
More informationNZQA registered unit standard 9184 version 6 Page 1 of 5
Page 1 of 5 Title Erect and dismantle non-notifiable prefabricated frame scaffolding up to five metres in height Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate
More informationBajaj Products.
+91-8048763600 Bajaj Products https://www.bajajpro.com/ We are designers, manufacturers & exporters of Centering,Shuttering & Staging systems (Scaffolding & Formwork). We have design based turnkey solutions
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
More informationSample Written Program. For. Scaffolds
Sample Written Program For Scaffolds 1 Scaffold Safety Program (COMPANY NAME) Purpose The purpose of this safety policy and procedure is to establish guidelines for the protection of {COMPANY} employees
More information