# Fundamental concepts and language Unit cells Crystal structures! Face-centered cubic! Body-centered cubic! Hexagonal close-packed Close packed

Save this PDF as:

Size: px
Start display at page:

Download "Fundamental concepts and language Unit cells Crystal structures! Face-centered cubic! Body-centered cubic! Hexagonal close-packed Close packed"

## Transcription

1 Fundamental concepts and language Unit cells Crystal structures! Face-centered cubic! Body-centered cubic! Hexagonal close-packed Close packed crystal structures Density computations

2 Crystal structure To discuss crystalline structures it is useful to consider atoms as being hard spheres with well-defined radii. In this hard-sphere model, the shortest distance between two like atoms is one diameter. We can also consider crystalline structure as a lattice of points at atom/sphere centers.

3 Unit Cell The unit cell is the smallest structural unit or building block that can describe the the crystal structure. Repetition of the unit cell generates the entire crystal. Example: 2D honeycomb net can be represented by translation of two adjacent atoms that form a unit cell for this 2D crystalline structure Example of 3D crystalline structure: Different choices of unit cells possible, generally choose parallelepiped unit cell with highest level of symmetry

4 Metallic Crystal Structures! Metals are usually (poly)crystalline; although formation of amorphous metals is possible by rapid cooling! As we learned in Chapter 2, the atomic bonding in metals is non-directional no restriction on numbers or positions of nearest-neighbor atoms large number of nearest neighbors and dense atomic packing! Atom (hard sphere) radius, R, defined by ion core radius - typically nm! The most common types of unit cells are the facedcentered cubic (FCC), the body-centered cubic (FCC) and the hexagonal close-packed (HCP).

5 Face-Centered Cubic (FCC) Crystal Structure (I)! Atoms are located at each of the corners and on the centers of all the faces of cubic unit cell! Cu, Al, Ag, Au have this crystal structure Two representations of the FCC unit cell

6 Face-Centered Cubic Crystal Structure (II) R! The hard spheres or ion cores touch one another across a face diagonal the cube edge length, a= 2R 2! The coordination number, CN = the number of closest neighbors to which an atom is bonded = number of touching atoms, CN = 12! Number of atoms per unit cell, n = 4. (For an atom that is shared with m adjacent unit cells, we only count a fraction of the atom, 1/m). In FCC unit cell we have: 6 face atoms shared by two cells: 6 x 1/2 = 3 8 corner atoms shared by eight cells: 8 x 1/8 = 1! Atomic packing factor, APF = fraction of volume occupied by hard spheres = (Sum of atomic volumes)/(volume of cell) = 0.74 (maximum possible) a

7 Face-Centered Cubic Crystal Structure (III)! Corner and face atoms in the unit cell are equivalent! FCC crystal has APF of 0.74, the maximum packing for a system equal-sized spheres FCC is a close-packed structure! FCC can be represented by a stack of close-packed planes (planes with highest density of atoms)

8 Body-Centered Cubic (BCC) Crystal Structure (I) Atom at each corner and at center of cubic unit cell Cr, α-fe, Mo have this crystal structure

9 Body-Centered Cubic Crystal Structure (II)! The hard spheres touch one another along cube diagonal the cube edge length, a= 4R/ 3! The coordination number, CN = 8! Number of atoms per unit cell, n = 2 Center atom (1) shared by no other cells: 1 x 1 = 1 8 corner atoms shared by eight cells: 8 x 1/8 = 1! Atomic packing factor, APF = 0.68! Corner and center atoms are equivalent a

10 Hexagonal Close-Packed Crystal Structure (I)! HCP is one more common structure of metallic crystals! Six atoms form regular hexagon, surrounding one atom in center. Another plane is situated halfway up unit cell (c-axis), with 3 additional atoms situated at interstices of hexagonal (close-packed) planes! Cd, Mg, Zn, Ti have this crystal structure

11 Hexagonal Close-Packed Crystal Structure (II)! Unit cell has two lattice parameters a and c. Ideal ratio c/a = 1.633! The coordination number, CN = 12 (same as in FCC)! Number of atoms per unit cell, n = 6. 3 mid-plane atoms shared by no other cells: 3 x 1 = 3 12 hexagonal corner atoms shared by 6 cells: 12 x 1/6 = 2 2 top/bottom plane center atoms shared by 2 cells: 2 x 1/2 = 1! Atomic packing factor, APF = 0.74 (same as in FCC)! All atoms are equivalent c a

12 Close-packed Structures (FCC and HCP)! Both FCC and HCP crystal structures have atomic packing factors of 0.74 (maximum possible value)! Both FCC and HCP crystal structures may be generated by the stacking of close-packed planes! The difference between the two structures is in the stacking sequence HCP: ABABAB... FCC: ABCABCABC

13 FCC: Stacking Sequence ABCABCABC... Third plane is placed above the holes of the first plane not covered by the second plane

14 HCP: Stacking Sequence ABABAB... Third plane is placed directly above the first plane of atoms

15 Density Computations Since the entire crystal can be generated by the repetition of the unit cell, the density of a crystalline material, ρ = the density of the unit cell = (atoms in the unit cell, n ) (mass of an atom, M) / (the volume of the cell, V c ) Atoms in the unit cell, n = 2 (BCC); 4 (FCC); 6 (HCP) Mass of an atom, M = Atomic weight, A, in amu (or g/mol) is given in the periodic table. To translate mass from amu to grams we have to divide the atomic weight in amu by the Avogadro number N A = atoms/mol The volume of the cell, V c = a 3 (FCC and BCC) a = 2R 2 (FCC); a = 4R/ 3 (BCC) where R is the atomic radius Thus, the formula for the density is: ρ = na V c N A Atomic weight and atomic radius of many elements you can find in the table at the back of the textbook front cover.

16 Anisotropy Different directions in a crystal have a different packing. For instance, atoms along the edge of FCC unit cell are more separated than along the face diagonal. This causes anisotropy in the properties of crystals, for instance, the deformation depends on the direction in which a stress is applied. In some polycrystalline materials, grain orientations are random, so bulk material properties are isotropic Some polycrystalline materials have grains with preferred orientations (texture), so properties are dominated by those relevant to the texture orientation and the material exhibits anisotropic properties

17 Metal Structure-Unit cell Direct Tutorial M.A.E. Saleh IE 251

18

19

20

21

22

23

24

### Chapter Outline. How do atoms arrange themselves to form solids?

Chapter Outline How do atoms arrange themselves to form solids? Fundamental concepts and language Unit cells Crystal structures! Face-centered cubic! Body-centered cubic! Hexagonal close-packed Close packed

### Chapter Outline How do atoms arrange themselves to form solids?

Chapter Outline How do atoms arrange themselves to form solids? Fundamental concepts and language Unit cells Crystal structures Face-centered cubic Body-centered cubic Hexagonal close-packed Close packed

### ENGINEERING MATERIALS LECTURE #4

ENGINEERING MATERIALS LECTURE #4 Chapter 3: The Structure of Crystalline Solids Topics to Cover What is the difference in atomic arrangement between crystalline and noncrystalline solids? What features

### Chapter 3 Structure of Crystalline Solids

Chapter 3 Structure of Crystalline Solids Crystal Structures Points, Directions, and Planes Linear and Planar Densities X-ray Diffraction How do atoms assemble into solid structures? (for now, focus on

### Introduction to Engineering Materials ENGR2000 Chapter 3: The Structure of Crystalline Solids. Dr. Coates

Introduction to Engineering Materials ENGR2000 Chapter 3: The Structure of Crystalline Solids Dr. Coates Learning Objectives I 1. Describe difference in atomic/molecular structure between crystalline/noncrystalline

### Packing of atoms in solids

MME131: Lecture 6 Packing of atoms in solids A. K. M. B. Rashid Professor, Department of MME BUET, Dhaka Today s topics Atomic arrangements in solids Points, directions and planes in unit cell References:

### Energy and Packing. Materials and Packing

Energy and Packing Non dense, random packing Energy typical neighbor bond length typical neighbor bond energy r Dense, regular packing Energy typical neighbor bond length typical neighbor bond energy r

### 9/16/ :30 PM. Chapter 3. The structure of crystalline solids. Mohammad Suliman Abuhaiba, Ph.D., PE

Chapter 3 The structure of crystalline solids 1 Mohammad Suliman Abuhaiba, Ph.D., PE 2 Home Work Assignments HW 1 2, 7, 12, 17, 22, 29, 34, 39, 44, 48, 53, 58, 63 Due Sunday 17/9/2015 3 Why study the structure

### Density Computations

CHAPTER 3 THE STRUCTURE OF CRYSTALLINE SOLIDS Fundamental Concepts 3.1 What is the difference between atomic structure and crystal structure? Unit Cells Metallic Crystal Structures 3.2 If the atomic radius

### General Objective. To develop the knowledge of crystal structure and their properties.

CRYSTAL PHYSICS 1 General Objective To develop the knowledge of crystal structure and their properties. 2 Specific Objectives 1. Differentiate crystalline and amorphous solids. 2. To explain nine fundamental

### Carbon nanostructures. (http://www.mf.mpg.de/de/abteilungen/schuetz/index.php?lang=en&content=researchtopics&type=specific&name=h2storage)

Carbon nanostructures (http://www.mf.mpg.de/de/abteilungen/schuetz/index.php?lang=en&content=researchtopics&type=specific&name=h2storage) 1 Crystal Structures Crystalline Material: atoms arrange into a

### ENERGY AND PACKING. Chapter 3 CRYSTAL STRUCTURE & PROPERTIES MATERIALS AND PACKING METALLIC CRYSTALS ISSUES TO ADDRESS...

Chapter 3 CRYSTAL STRUCTURE & PROPERTIES ISSUES TO ADDRESS... 1. How do s assemble into solid structures? (For now, focus on metals) ENERGY AND PACKING non dense, random packing bond energy Energy bond

### 9/28/2013 9:26 PM. Chapter 3. The structure of crystalline solids. Dr. Mohammad Abuhaiba, PE

Chapter 3 The structure of crystalline solids 1 2 Why study the structure of crystalline solids? Properties of some materials are directly related to their crystal structure. Significant property differences

### CH445/545 Winter 2008

CH445/545 Winter 2008 Assignment # 1 - due 01/18/08 60 total points SHOW ALL WORKING FOR FULL CREDIT, ANSWERS WITHOUT WORKING WILL BE PENALIZED! 1. Text Ch. 1 # 2 "Calculate the size of the largest sphere

### CHAPTER 3: CRYSTAL STRUCTURES & PROPERTIES

CHAPTER 3: CRYSTAL STRUCTURES & PROPERTIES ISSUES TO ADDRESS... How do atoms assemble into solid structures? (for now, focus on metals) How does the density of a material depend on its structure? When

### Metallic crystal structures The atomic bonding is metallic and thus non-directional in nature

Chapter 3 The structure of crystalline solids Hw: 4, 6, 10, 14, 18, 21, 26, 31, 35, 39, 42, 43, 46, 48, 49, 51, 56, 61 Due Wensday 14/10/2009 Quiz1 on Wensday 14/10/2009 Why study the structure of crystalline

### CHAPTER 3. Crystal Structures and Crystal Geometry 3-1

CHAPTER 3 Crystal Structures and Crystal Geometry 3-1 The Space Lattice and Unit Cells 3-2 Atoms, arranged in repetitive 3-Dimensional pattern, in long range order (LRO) give rise to crystal structure.

### CHAPTER 5 IMPERFECTIONS IN SOLIDS PROBLEM SOLUTIONS

CHAPTER 5 IMPERFECTIONS IN SOLIDS PROBLEM SOLUTIONS Vacancies and Self-Interstitials 5.1 Calculate the fraction of atom sites that are vacant for copper at its melting temperature of 1084 C (1357 K). Assume

### These metal centres interact through metallic bonding

The structures of simple solids The majority of inorganic compounds exist as solids and comprise ordered arrays of atoms, ions, or molecules. Some of the simplest solids are the metals, the structures

### Chapter 8: Molecules and Materials

Chapter 8: Molecules and Materials Condensed Phases - Solids Bonding in Solids Metals Insulators Semiconductors Intermolecular Forces Condensed Phases - Liquids Carbon There are three forms of the element

### Structure of silica glasses (Chapter 12)

Questions and Problems 97 Glass Ceramics (Structure) heat-treated so as to become crystalline in nature. The following concept map notes this relationship: Structure of noncrystalline solids (Chapter 3)

### CHAPTER 5 IMPERFECTIONS IN SOLIDS PROBLEM SOLUTIONS ev /atom = exp. kt ( =

CHAPTER 5 IMPERFECTIONS IN SOLIDS PROBLEM SOLUTIONS Vacancies and Self-Interstitials 5.1 Calculate the fraction of atom sites that are vacant for copper at its melting temperature of 1084 C (1357 K). Assume

### 1.10 Close packed structures cubic and hexagonal close packing

1.9 Description of crystal structures The most common way for describing crystal structure is to refer the structure to the unit cell. The structure is given by the size and shape of the cell and the position

### SOLID-STATE STRUCTURE.. FUNDAMENTALS

SOLID-STATE STRUCTURE.. FUNDAMENTALS Metallic Elements & Sphere Packing, Unit Celis, Coordination Number, Ionic Structures Stoichiometry PRELAB ASSIGNMENT Properties of Shapes & Patterns following question

### Point Defects in Metals

CHAPTER 5 IMPERFECTIONS IN SOLIDS PROBLEM SOLUTIONS Point Defects in Metals 5.1 Calculate the fraction of atom sites that are vacant for lead at its melting temperature of 327 C (600 K). Assume an energy

### Two marks questions and answers. 1. what is a Crystal? (or) What are crystalline materials? Give examples

UNIT V CRYSTAL PHYSICS PART-A Two marks questions and answers 1. what is a Crystal? (or) What are crystalline materials? Give examples Crystalline solids (or) Crystals are those in which the constituent

### The structures of pure metals are crystalline (crystal lattice) with regular arrangement of metal atoms that are identical perfect spheres.

HW#3 Louisiana Tech University, Chemistry 481. POGIL (Process Oriented Guided Inquiry Learning) Exercise on Chapter 3. Metals and Alloys. Why? Metals What is the structure of a metallic solid? What is

### Stacking Oranges. Packing atoms together Long Range Order. What controls the nearest number of atoms? Hard Sphere Model. Hard Sphere Model.

{ Stacking atoms together Crystal Structure Stacking Oranges Packing atoms together Long Range Order Crystalline materials... atoms pack in periodic, 3D arrays typical of: -metals -many ceramics -some

### Impurities in Solids. Crystal Electro- Element R% Structure negativity Valence

4-4 Impurities in Solids 4.4 In this problem we are asked to cite which of the elements listed form with Ni the three possible solid solution types. For complete substitutional solubility the following

### CHAPTER 2. Structural Issues of Semiconductors

CHAPTER 2 Structural Issues of Semiconductors OUTLINE 1.0 Energy & Packing 2.0 Materials & Packing 3.0 Crystal Structures 4.0 Theoretical Density, r 5.0.Polymorphism and Allotropy 6.0 Close - Packed Crystal

### Chem 241. Lecture 19. UMass Amherst Biochemistry... Teaching Initiative

Chem 241 Lecture 19 UMass Amherst Biochemistry... Teaching Initiative Announcement March 26 Second Exam Recap Water Redox Comp/Disproportionation Latimer Diagram Frost Diagram Pourbaix Diagram... 2 Ellingham

### STATE OF SOLIDIFICATION & CRYSTAL STRUCTURE

STATE OF SOLIDIFICATION & CRYSTAL STRUCTURE Chapter Outline Determination of crystal properties or properties of crystalline materials. Crystal Geometry! Crystal Directions! Linear Density of atoms! Crystal

### Basic Solid State Chemistry, 2 nd ed. West, A. R.

Basic Solid State Chemistry, 2 nd ed. West, A. R. Chapter 1 Crystal Structures Many of the properties and applications of crystalline inorganic materials revolve around a small number of structure types

### Engineering 45: Properties of Materials Final Exam May 9, 2012 Name: Student ID number:

Engineering 45: Properties of Materials Final Exam May 9, 2012 Name: Student ID number: Instructions: Answer all questions and show your work. You will not receive partial credit unless you show your work.

### CRYSTAL STRUCTURE, MECHANICAL BEHAVIOUR & FAILURE OF MATERIALS

MODULE ONE CRYSTAL STRUCTURE, MECHANICAL BEHAVIOUR & FAILURE OF MATERIALS CRYSTAL STRUCTURE Metallic crystal structures; BCC, FCC and HCP Coordination number and Atomic Packing Factor (APF) Crystal imperfections:

### Crystal Structures of Interest

rystal Structures of Interest Elemental solids: Face-centered cubic (fcc) Hexagonal close-packed (hcp) ody-centered cubic (bcc) Diamond cubic (dc) inary compounds Fcc-based (u 3 u,nal, ß-ZnS) Hcp-based

### Unit-1 THE SOLID STATE QUESTIONS VSA QUESTIONS (1 - MARK QUESTIONS)

Unit-1 THE SOLID STATE QUESTIONS VSA QUESTIONS (1 - MARK QUESTIONS) 1. What are anistropic substances. 2. Why are amorphous solids isotropic in nature?. Why glass is regarded as an amorphous solid? 4.

### Chapter 3: Structures of Metals & Ceramics

Chapter 3: Structures of Metals & Ceramics School of Mechanical Engineering Professor Choi, Hae-Jin Chapter 3-1 Chapter 3: Structures of Metals & Ceramics ISSUES TO ADDRESS... How do atoms assemble into

### CRYSTAL LATTICE. Defining lattice: Mathematical construct; ideally infinite arrangement of points in space.

CRYSTAL LATTICE How to form a crystal? 1. Define the structure of the lattice 2. Define the lattice constant 3. Define the basis Defining lattice: Mathematical construct; ideally infinite arrangement of

### 3.40 Sketch within a cubic unit cell the following planes: (a) (01 1 ) (b) (112 ) (c) (102 ) (d) (13 1) Solution

3.40 Sketch within a cubic unit cell the following planes: (a) (01 1 ) (b) (11 ) (c) (10 ) (d) (13 1) The planes called for are plotted in the cubic unit cells shown below. 3.41 Determine the Miller indices

### (C) Na 2. (B) NaWO 3 WO 3

EXERCISE-01 CHECK YOUR GRASP SELECT THE CORRECT ALTERNATIVE (ONLY ONE CORRECT ANSWER) 1. A solid has a structure in which W atoms are located at the corners of a cubic lattice, O atom at the centre of

### Materials and their structures

Materials and their structures 2.1 Introduction: The ability of materials to undergo forming by different techniques is dependent on their structure and properties. Behavior of materials depends on their

### Primitive cells, Wigner-Seitz cells, and 2D lattices. 4P70, Solid State Physics Chris Wiebe

Primitive cells, Wigner-Seitz cells, and 2D lattices 4P70, Solid State Physics Chris Wiebe Choice of primitive cells! Which unit cell is a good choice?! A, B, and C are primitive unit cells. Why?! D, E,

### Chapter 3. The structures of simple solids Structures of Solids Crystalline solids Amorphous solids

Chapter 3. The structures of simple solids Structures of Solids Crystalline solids The atoms, molecules or ions pack together in an ordered arrangement Such solids typically have flat surfaces, with unique

### Review key concepts from last lecture (lattice + basis = unit cell) Bravais lattices Important crystal structures Intro to miller indices

Outline: Review key concepts from last lecture (lattice + basis = unit cell) Bravais lattices Important crystal structures Intro to miller indices Review (example with square lattice) Lattice: square,

### Continuous Cooling Diagrams

Continuous Cooling Diagrams Isothermal transformation (TTT) diagrams are obtained by rapidly quenching to a given temperature and then measuring the volume fraction of the various constituents that form

### Free Electron Model What kind of interactions hold metal atoms together? How does this explain high electrical and thermal conductivity?

Electrical Good conductors of heat & electricity Create semiconductors Oxides are basic ionic solids Aqueous cations (positive charge, Lewis acids) Reactivity increases downwards in family Mechanical Lustrous

### CHAPTER 2: ATOMIC ARRANGEMENTS AND MINERALOGICAL STRUCTURES. Sarah Lambart

CHAPTER 2: ATOMIC ARRANGEMENTS AND MINERALOGICAL STRUCTURES Sarah Lambart RECAP CHAP. 1 Mineral: naturally occurring (always) a structure and a composition that give it defined macroscopic properties (always)

### Review of Metallic Structure

Phase Diagrams Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International All rights reserved www.asminternational.org Appendix A Review of Metallic Structure The word metal, derived

### Free Electron Model What kind of interactions hold metal atoms together? How does this explain high electrical and thermal conductivity?

Electrical Good conductors of heat & electricity Create semiconductors Oxides are basic ionic solids Aqueous cations (positive charge, Lewis acids) Reactivity increases downwards in family Free Electron

### UNIT V -CRYSTAL STRUCTURE

UNIT V -CRYSTAL STRUCTURE Solids are of two types: Amorphous and crystalline. In amorphous solids, there is no order in the arrangement of their constituent atoms (molecules). Hence no definite structure

### Part 1. References: Gray: Chapter 6 OGN: Chapter 19 and (24.1)

Part 1 References: Gray: Chapter 6 OGN: Chapter 19 and (24.1) Aspects of Chemical Bonds Bonding in Chem 1a Atomic Structure Explain Atomic Line Spectra, Galaxies, etc. Shapes of Orbitals in Atoms for Bonding

### Lecture # 11 References:

Lecture # 11 - Line defects (1-D) / Dislocations - Planer defects (2D) - Volume Defects - Burgers vector - Slip - Slip Systems in FCC crystals - Slip systems in HCP - Slip systems in BCC Dr.Haydar Al-Ethari

### SECOND MIDTERM EXAM Chemistry April 2011 Professor Buhro

SECOND MIDTERM EXAM Chemistry 465 1 April 011 Professor Buhro Signature Print Name Clearly ID Number: Information. This is a closed-book exam; no books, notes, other students, other student exams, or any

### Point Defects. Vacancies are the most important form. Vacancies Self-interstitials

Grain Boundaries 1 Point Defects 2 Point Defects A Point Defect is a crystalline defect associated with one or, at most, several atomic sites. These are defects at a single atom position. Vacancies Self-interstitials

### Chemistry/Materials Science and Engineering C150 Introduction to Materials Chemistry

Chemistry/Materials Science and Engineering C150 Introduction to Materials Chemistry Class will meet Tuesdays and Thursdays, 8:00-9:30 am, in 433 Latimer Hall. Instructor: Office Hours: Jeffrey Long (211

### Chem 253, UC, Berkeley. Chem 253, UC, Berkeley

1 2 Theorem: For any family of lattice planes separated by distance d, there are reciprocal lattice vectors perpendicular to the planes, the shortest being 2 /d. Orientation of plane is determined by a

### Chapter 11. States of Matter Liquids and Solids. Enthalpy of Phase Change

Chapter 11 solids: rigid ordered arrangement or particles fixed volume and shape not compressible particles very close together States of Matter Liquids and Solids liquids: fluid (flow) fixed volume but

### Unit 1 The Solid State

Points to Remember Amorphous and Crystalline Solids Unit 1 The Solid State Amorphous- short range order, Irregular shape eg-glass Crystalline Solids- long range order, regular shape eg : NaCl Molecular

### Close Packings of Spheres I.

Close Packings of Spheres I. close packed layer a non-close packed layer stacking of 2 close packed layers 3rd layer at position S: h.c.p. 3rd layer at position T: c.c.p. h.c.p.: hexagonal close packing

### Symmetry in crystalline solids.

Symmetry in crystalline solids. Translation symmetry n 1,n 2,n 3 are integer numbers 1 Unitary or primitive cells 2D 3D Red, green and cyano depict all primitive (unitary) cells, whereas blue cell is not

### Twins & Dislocations in HCP Textbook & Paper Reviews. Cindy Smith

Twins & Dislocations in HCP Textbook & Paper Reviews Cindy Smith Motivation Review: Outline Crystal lattices (fcc, bcc, hcp) Fcc vs. hcp stacking sequences Cubic {hkl} naming Hcp {hkil} naming Twinning

### Non-crystalline Materials

Noncrystalline (or amorphous) solids by definition means atoms are stacked in irregular, random patterns. The general term for non-crystallline solids with compositions comparable to those of crystalline

### Chapter Outline Dislocations and Strengthening Mechanisms. Introduction

Chapter Outline Dislocations and Strengthening Mechanisms What is happening in material during plastic deformation? Dislocations and Plastic Deformation Motion of dislocations in response to stress Slip

### Module-6. Dislocations and Strengthening Mechanisms

Module-6 Dislocations and Strengthening Mechanisms Contents 1) Dislocations & Plastic deformation and Mechanisms of plastic deformation in metals 2) Strengthening mechanisms in metals 3) Recovery, Recrystallization

### Master examination. Metallic Materials

Master examination Metallic Materials 01.03.2016 Name: Matriculation number: Signature: Task Points: Points achieved: 1 13 2 4 3 3 4 6 5 6 6 3 7 4 8 9 9 6 10 9.5 11 8 12 8 13 10.5 14 4 15 6 Sum 100 Points

### Crystal Structure. Andrew R. Barron Carissa Smith. 1 Introduction. 2 Crystallography

OpenStax-CNX module: m16927 1 Crystal Structure Andrew R. Barron Carissa Smith This work is produced by OpenStax-CNX and licensed under the Creative Commons Attribution License 2.0 1 Introduction In any

### The local atomic packing of a single-component glass is quasi-crystalline

The local atomic packing of a single-component glass is quasi-crystalline Farid F. Abraham IBM Almaden Research Center San Jose, CA *Contact Address 865 Paullus Drive Hollister CA 95023 fadlow@outlook.com

### ALE 20. Crystalline Solids, Unit Cells, Liquids and the Uniqueness of Water

Name Chem 162, Section: Group Number: ALE 20. Crystalline Solids, Unit Cells, Liquids and the Uniqueness of Water (Reference: pp. 463 473 of Sec. 12.6 Silberberg 5 th edition) How are the particles within

### TOPIC 2. STRUCTURE OF MATERIALS III

Universidad Carlos III de Madrid www.uc3m.es MATERIALS SCIENCE AND ENGINEERING TOPIC 2. STRUCTURE OF MATERIALS III Topic 2.3: Crystalline defects. Solid solutions. 1 PERFECT AND IMPERFECT CRYSTALS Perfect

### Chapter 16. Liquids and Solids. Chapter 16 Slide 1 of 87

Chapter 16 Liquids and Solids Chapter 16 Slide 1 of 87 Chapter Preview Intramolecular forces determine such molecular properties as molecular geometries and dipole moments. Intermolecular forces determine

### Engineering Materials Department of Physics K L University

Engineering Materials Department of Physics K L University 1 Crystallography Bonding in solids Many of the physical properties of materials are predicated on a knowledge of the inter-atomic forces that

### Ceramic Science 4RO3. Lecture 2. Tannaz Javadi. September 16, 2013

Ceramic Science 4RO3 Lecture 2 September 16, 2013 Tannaz Javadi Rule 5: In an Ionic structure the chemical environment (cations) that is surrounding an anion should be at least uniform and similar. Although

### CHAPTER 5: DIFFUSION IN SOLIDS

CHAPTER 5: DIFFUSION IN SOLIDS ISSUES TO ADDRESS... How does diffusion occur? Why is it an important part of processing? How can the rate of diffusion be predicted for some simple cases? How does diffusion

### How to Make Micro/Nano Devices?

How to Make Micro/Nano Devices? Science: Physics, Chemistry, Biology, nano/biotech Materials: inorganic, organic, biological, rigid/flexible Fabrication: photo/e-beam lithography, self-assembly, D/3D print

### Imperfections: Good or Bad? Structural imperfections (defects) Compositional imperfections (impurities)

Imperfections: Good or Bad? Structural imperfections (defects) Compositional imperfections (impurities) 1 Structural Imperfections A perfect crystal has the lowest internal energy E Above absolute zero

### Dislocations & Materials Classes. Dislocation Motion. Dislocation Motion. Lectures 9 and 10

Lectures 9 and 10 Chapter 7: Dislocations & Strengthening Mechanisms Dislocations & Materials Classes Metals: Disl. motion easier. -non-directional bonding -close-packed directions for slip. electron cloud

### Effect of Li Addition on Synthesis of Mg-Ti BCC Alloys by means of Ball Milling

Materials Transactions, Vol. 48, No. 2 (07) pp. 121 to 126 #07 The Japan Institute of Metals Effect of Li Addition on Synthesis of - BCC Alloys by means of Ball Milling Kohta Asano, Hirotoshi Enoki and

### X-RAY DIFFRACTIO N B. E. WARREN

X-RAY DIFFRACTIO N B. E. WARREN Chapter 1 X-Ray Scattering by Atom s 1.1 Classical scattering by a free electron 1 1.2 Polarization by scattering 4 1.3 Scattering from several centers, complex representation

### Excess Volume at Grain Boundaries in hcp Metals

Excess Volume at Grain Boundaries in hcp Metals J. L. Cao and W. T. Geng * School of Materials Science & Engineering, University of Science and Technology Beijing, Beijing 100083, China Abstract The excess

### Strengthening Mechanisms

Strengthening Mechanisms The ability of a metal/ alloy to plastically deform depends on the ability of dislocations to move. Strengthening techniques rely on restricting dislocation motion to render a

### Halbleiter Prof. Yong Lei Prof. Thomas Hannappel

Halbleiter Prof. Yong Lei Prof. Thomas Hannappel yong.lei@tu-ilmenau.de thomas.hannappel@tu-ilmenau.de http://www.tu-ilmenau.de/nanostruk/ Solid State Structure of Semiconductor Semiconductor manufacturing

### Donald Neamen 물리전자 / 김삼동 1-1

An Introduction to Semiconductor Devices Donald Neamen Images and illustrations from supplements of An Introduction to Semiconductor Devices, 4 th Ed., Mc Graw Hill were used for this lecture materials.

### Texture and properties - II

Texture and properties - II Texture and Hall-Petch strength The Hall-Petch equation 0 k d - ½ where, 0 = k = d = lattice frictional stress locking parameter average grain size modifies for textured polycrystals

### PHYSICAL ELECTRONICS(ECE3540) Brook Abegaz, Tennessee Technological University, Fall 2013

PHYSICAL ELECTRONICS(ECE3540) Brook Abegaz, Tennessee Technological University, Fall 2013 1 Chapter 1 The Crystal Structure of Solids Physical Electronics: Includes aspects of the physics of electron movement

### Supplemental Exam Problems for Study

3.091 OCW Scholar Self-Asessment Crystalline Materials Supplemental Exam Problems for Study Solutions Key 3.091 Fall Term 2007 Test #2 page 2 Problem #1 z z y y x x (a) Using proper crystallographic notation

### 11.3 The analysis of electron diffraction patterns

11.3 The analysis of electron diffraction patterns 277 diameter) Ewald reflecting sphere, the extension of the reciprocal lattice nodes and the slight buckling of the thin foil specimens all of which serve

### Microstructural parameters from Multiple Whole Profile (MWP) or Convolutional Multiple Whole Profile (CMWP) computer programs

Microstructural parameters from Multiple Whole Profile (MWP) or Convolutional Multiple Whole Profile (CMWP) computer programs Iuliana Dragomir-Cernatescu School of Materials Science and Engineering, Georgia

### C h a p t e r 4 : D e f e c t s i n C r y s t a l s

C h a p t e r 4 : D e f e c t s i n C r y s t a l s...perfection's a gift of The gods, few can boast they possess it - and most Of you, my dears, don't. - Ovid, The Art of Love Chapter 4: Defects in Crystals...

### Planar Defects in Materials. Planar Defects in Materials

Classification of Defects in Solids: Planar defects: Stacking faults o {311} defects in Si o Inversion domain boundaries o Antiphase boundaries (e.g., super dislocations): analogous to partials but in

### Defects and Diffusion

Defects and Diffusion Goals for the Unit Recognize various imperfections in crystals Point imperfections Impurities Line, surface and bulk imperfections Define various diffusion mechanisms Identify factors

### HOMEWORK 6. solutions

HOMEWORK 6. SCI 1410: materials science & solid state chemistry solutions Textbook Problems: Imperfections in Solids 1. Askeland 4-67. Why is most gold or siler jewelry made out of gold or siler alloyed

### Semiconductor Very Basics

Semiconductor Very Basics Material (mostly) from Semiconductor Devices, Physics & Technology, S.M. Sze, John Wiley & Sons Semiconductor Detectors, H. Spieler (notes) July 3, 2003 Conductors, Semi-Conductors,

### Lectures on: Introduction to and fundamentals of discrete dislocations and dislocation dynamics. Theoretical concepts and computational methods

Lectures on: Introduction to and fundamentals of discrete dislocations and dislocation dynamics. Theoretical concepts and computational methods Hussein M. Zbib School of Mechanical and Materials Engineering

### High Anisotropy L1 0 FePt Media for Perpendicular Magnetic Recording Applications

DISKCON 2008 High Anisotropy L1 0 FePt Media for Perpendicular Magnetic Recording Applications Boon Chow LIM Agency for Science Technology & Research (A*STAR) DATA STORAGE INSTITUTE 5 Engineering Drive

### ENGN2340 Final Project Computational rate independent Single Crystal Plasticity with finite deformations Abaqus Umat Implementation

ENGN2340 Final Project Computational rate independent Single Crystal Plasticity with finite deformations Abaqus Umat Implementation Anastasia Tzoumaka Fall 2017 Intorduction: Single crystals, are monocrystalline

### Chemistry 145 Exam number 4 name 11/19/98 # Faraday s constant is 96,500 c/mole of electrons.

Chemistry 145 Exam number 4 name 11/19/98 # Faraday s constant is 96,500 c/mole of electrons. A.(16) An electrochemical cell is prepared with a strip of manganese metal dipping in to a 1.0 M MnSO 4 solution

### Symmetry and Anisotropy Structure, Properties, Sample and Material, Texture and Anisotropy, Symmetry

Symmetry and Anisotropy Structure, Properties, Sample and Material, Texture and Anisotropy, Symmetry Objectives Symmetry Operators & Matrix representation. Effect of crystal and sample symmetry