SELF CLINCHING STAND-OFFS
|
|
|
- Edith Bridges
- 6 years ago
- Views:
Transcription
1 SEF INING SEF INING STAND OFFS are designed to serve as spacers or distance pieces. A simple squeezing action embeds the hexagonal head into the sheet causing the displaced metal to flow into the clinching groove. ADVANTAGES AVAIAE IN A RANGE OF SPAER ENGTS REMAINS MEANIAY INED IN SEET FOR EAVY DUTY APPIATIONS SS (ARGER SUPPORT SURFAE) TYPES ARE AVAIAE (3.5M ) TROUG TREADED AND IND TREADED RANGES. PAIN OE VERSIONS AVAIAE TO SPEIA ORDER DESIGN GUIDE OE SIZE oles must be held to a tolerance of (-0.00mm +0.08mm) Therefore punched holes are recommended. oles should not be de-burred or countersunk. INSTAATION Must always be carried out using a squeeze action - NEVER a shock load MAXIMUM SEET ARDNESS Rb80 for hardened steel fasteners (P-SO & P-SO) Rb70 for stainless steel fasteners (P-SOS & P-SOS) Rb50 for aluminium fasteners (P-SOA & P-SOA) EAVY DUTY USE Where heavy duty use is anticipated, P-SO and P-SO in larger body sizes offering greater wall thickness. (For example: M3 in M3.5 body size would be coded 3.5M3 and 4.40UN in 6.32UN body size would be coded 6440 (see dimension charts) 2-39
2 SEF INING TENIA DATA P-SO TROUG OE TYPE (METRI) MATERIA ODE P-SO - ardened Zinc Plated P-SOS - Stainless P-SOA - Aluminum D STANDARD PATING FINIS Zinc & lear Trivalent Passivation (Z) TREAD SIZE / ODE ole Size in TREAD & ENGT DATA ounter-ore Dia +/ All dimensions in millimetres imum distance M M M M M M TREAD "" Stainless SIZE / ODE Aluminum ( in millimetres) M2.5 P-SO P-SOS P-SOA N/A N/A N/A M3 P-SO P-SOS P-SOA N/A N/A N/A 3.5M3 P-SO P-SOS P-SOA N/A N/A N/A M3.5 P-SO P-SOS P-SOA M4 P-SO P-SOS P-SOA M5 P-SO P-SOS P-SOA D = ounterbore Depth +/ NONE OW TO SPEIFY P-SO ( Standard Sizes) Product ode Plating ode P-SOS (Stainless Standard Sizes) Product ode P - S O S - M P - S O S - M P - S O S - M
3 SEF INING TENIA DATA P-SO TROUG OE TYPE (UNIFIED) MATERIA ODES P-SO - ardened Zinc Plated P-SOS - Stainless P-SOA - Aluminum D STANDARD PATING FINIS Zinc & lear Trivalent Passivation (Z) TREAD SIZE / ODE ole Size in ounter-ore Dia +/ All dimensions in inches imum distance / TREAD & ENGT DATA TREAD "" ( in 32nds of an inch) SIZE / ODE Stainless Aluminum 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/ / P-SO P-SOS P-SOA N/A N/A N/A N/A N/A 6440 P-SO P-SOS P-SOA N/A N/A N/A N/A N/A 632 P-SO P-SOS P-SOA P-SO P-SOS P-SOA P-SO P-SOS P-SOA / 024 P-SO P-SOS P-SOA D = ounterbore Depth +/-.010 NONE OW TO SPEIFY P-SO ( Standard Sizes) Product ode Plating ode P-SOS (Stainless Standard Sizes) Product ode P - S O S P - S O S P - S O S
4 SEF INING TENIA DATA P-SO IND OE TYPE (METRI) MATERIA ODES P-SO - ardened Zinc Plated P-SOS - Stainless P-SOA - Aluminum F STANDARD PATING FINIS Zinc & lear Trivalent Passivation (Z) TREAD SIZE / ODE ole Size in TREAD & ENGT DATA All dimensions in millimetres imum distance M2.5 > M3 > M3 > M3.5 > M4 > M5 > TREAD SIZE / ODE Stainless Aluminum "" ( in millimetres) M2.5 P-SO P-SOS P-SOA N/A N/A N/A M3 P-SO P-SOS P-SOA M3 P-SO P-SOS P-SOA M3.5 P-SO P-SOS P-SOA M4 P-SO P-SOS P-SOA M5 P-SO P-SOS P-SOA F = min full threads in mm OW TO SPEIFY P-SO ( Standard Sizes) P-SOS (Stainless Standard Sizes) Product ode Plating ode P-SO-M4-10-Z P-SO-M4-10-Z P-SO-M4-10-Z P-SO-M4-10-Z Product ode P - S O S - M P - S O S - M P - S O S - M
5 SEF INING TENIA DATA P-SO IND OE TYPE (UNIFIED) MATERIA ODES P-SO - ardened Zinc Plated P-SOS - Stainless P-SOA - Aluminum F STANDARD PATING FINIS Zinc & lear Trivalent Passivation (Z) TREAD SIZE / ODE TREAD & ENGT DATA OW TO SPEIFY ole Size in All dimensions in inches imum distance / TREAD SIZE / ODE Stainless Aluminum 5/ /8.375 "" ( in 32nds of an inch) 7/ / P-SO P-SOS P-SOA P-SO P-SOS P-SOA P-SO P-SOS P-SOA P-SO P-SOS P-SOA P-SO P-SOS P-SOA / 024 P-SO P-SOS P-SOA F = min full threads in inches / / / / / / / / P-SO ( Standard Sizes) P-SOS (Stainless Standard Sizes) Product ode Plating ode P-SO Z P-SO Z Product ode P-SOS P-SOS P-SOS
6 SEF INING METOD OF ASSEMY Punch a hole in the metal sheet to the size recommended in our technical data table. Deburring of the hole is not recommended. Insert the stand off through the hole in sheet and into the anvil as shown in the drawing. Apply squeezing pressure sufficient to embed PERFORMANE DATA (METRI) M2.5 M3 3.5M3 M3.5 M4 M5 SEF INING STAND OFFS are easy to install because no special tooling is necessary. owever, it is very important to note that they must always be installed by a squeeze action press rather than a hammer blow. Punched holes are always recommended. Thread Size A' = ole in Anvil Metric mm inches 2.5/ M Test Material Stand Off 1.5 mm old Rolled 1.5 mm Aluminum Installation (kn) Pushout (N) Torque-out (Nm) Installation (kn) Pushout (N) Torque-out (Nm) Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA PERFORMANE DATA (UNIFIED) Thread ode Test Material.060" old Rolled.060" Aluminum Stand Off Torque-out Installation (lbs) Pushout (lbs) Installation (lbs) Pushout (lbs) Torque-out (in/lbs) (in/lbs) Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Stainless Aluminium NA NA NA Note: The above values are averages when correct installation is performed. Variations in holes size, material recommend consultation with your PSM Technology entre. 2-44
SELF-CLINCHING STUDS AND PINS BULLETIN
BULLETIN F 210 R e v. 1210 PEM self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
SELF-CLINCHING STUDS AND PINS BULLETIN
BULLETIN F 712 R e v 812 PEM self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head
SELF-CLINCHING STUDS AND PINS
Bulletin F-1217 Rev 718 PEM brand self-clinching studs and pins install permanently in aluminum, steel or stainless steel sheets. F SELF-LINING STUDS AND PINS PEM self-clinching studs are easily installed
SELF-CLINCHING STUDS AND PINS BULLETIN
BULLETIN F 116 Re v 416 PEM self-clinching studs are easily installed by placing them in properly sized holes in sheets and squeezing into place with any standard press: Install permanently in aluminum,
SELF-CLINCHING STUDS AND PINS BULLETIN
BULLETIN F 116 R e v 617 PEM self-clinching studs are easily installed by placing them in properly sized holes in sheets and squeezing into place with any standard press: Install permanently in aluminum,
1 1 4" FRAMING SYSTEM
4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z
High Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
Workmanship Acceptance Standards
Workmanship Acceptance Standards Subject: O.D and I.D tolerances and concentricity Scope: To establish common practice for specifying tolerances of outside and inside diameters and concentricity of washers.
CHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
SELF-CLINCHING FASTENERS
ONS-GROUP SF-INING FSNRS 2015/2016 catalogue echnical xplanations Self-clinching fasteners with internal and external threads are especially well-suited for working with thin metal sheets of at least 0.5
Mechanical Properties - Standard. Standard Mild Steel Studs AWS Type A
General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis
TruBolt A4 316 SS. Cracked Concrete - Mechanical Anchoring 47.1 CRACKED CONCRETE - STUD ANCHOR 47.1 GENERAL INFORMATION
47.1 CRACKED CONCRETE - STUD ANCHOR 47.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product A Heavy duty, torque controlled expansion anchor, made of stainless steel for use
I.fiL-S /la 31 March 1986 Si.JPERSEDING MIL-S-63540/1 28 June 1982
I.fiL-S-635 40 /la 31 March 1986 Si.JPERSEDING MIL-S-63540/1 28 June 1982 MILITARY SPECIFICATION SHEET S'IUD, SELF-LOCKING; FLUSH HEAD, RIBBED CLINCH TYPE This specification is approved for use by all
PROJECT SUBMITTAL. Power-Stud TM. Wedge Expansion Anchor PROJECT SUBMITTAL CONTENTS APPROVALS AND LISTINGS
PROJECT SUBMITTAL Power-Stud TM Wedge Expansion Anchor Anchoring into Solid Concrete and Masonry Base Materials Anchor Diameter is the Same as the Hole Diameter Interlocking Clip Wedges Prevent Anchor
Hilti, Inc South 122 nd East Avenue Tulsa, OK
ttached are page(s) from the 2011 Hilti North merican Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation, corrosion,
SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE
LA+ LAL+ PRODUCT DATA SHEET DROP IN ANCHORS SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 ETA-approved drop in anchors ideal for suspension systems
CD Capacitor Discharge The Process
CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product including
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Fastening, Edition 16.1. Please refer to the publication in its entirety for complete details on this product
PRODUCT DATA SHEET SAFETY BOLT
S SK B S A4 SK A4 B A4 PRODUCT DATA SHEET SAFETY BOLT LEGENDARY TWIN-CONE HEAVY DUTY ANCHOR FOR HI-POWER PERFORMANCE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 Legendary twin-cone heavy
Blue-Tip SCREW-BOLT. Ratchet teeth locks head against fixture. Reverse parabolic threads privide high load capacity
Blue-Tip SCREW-BOLT Introduction Blue -Tip SCREW-BOLT anchors have many unique features and benefits that make this innovative anchor well suited for almost every application. Optimum performance is obtained
Cover Page - Series 60 Wafer Check Valves
DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
HIGH PERFORMANCE MALE ROD ENDS - ALUMINIUM. Dimensions in Inches. d 2. Ref
ROD ENDS SRE Australia supply a comprehensive range of quality Rod Ends www.sreaustralia.com.au SRE Australia Products & Services SRE Australia Pty Ltd was established February 2010, manufacturing Spherical
SpaTec Plus. Cracked Concrete - Mechanical Anchoring 46.1 CRACKED CONCRETE - SAFETY ANCHORS 46.1 GENERAL INFORMATION
46.1 CRACKED CONCRETE - SAFETY ANCHORS 46.1 GENERAL INFORMATION Product A high security, high performance, through fixing, torque controlled expansion anchor which has approval for use in cracked and noncracked
Wedge Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE. Trubolt. Wedge Anchor ADVANTAGES
CONCRETE ANCHORING SPECIALISTS Dependable, Heavy-Duty, Inspectable, Wedge Type Expansion Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Wedge Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchors
Downloaded from DETAIL SPECIFICATION NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE
INCH-POUND 14 JUNE 2011 SUPERSEDING MIL-DTL-45913C 30 APRIL 1998 DETAIL SPECIFICATION NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE This specification is approved for use by all Departments and Agencies
Pipe couplings and fittings
Mech Tees - Threaded 1) 1) The Rp1/2 and Rp3/4 outlet sizes are intended for direct connection to sprinklers onlys ÄI00 / 2015-04 P11.194.611-1V DN Inch Model OD 50 2 3J 60.3 (2.37) 65 3 3J 76.1 (3.0)
Hollo-Bolt. Hollo-Bolt by Lindapter. Hollo-Bolt Options
Hollo- by Lindapter 37 Hollo- by Lindapter Installation is quickly carried out by inserting into pre-drilled steel and tightening with a torque wrench. Independent approvals include ICC-ES seismic accreditation,
DIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
EXH HEAT-SINK ALUMINIUM ENCLOSURE
EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH series is an aluminium enclosure with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation
HFX Adhesive Anchor Adhesive Anchoring Systems
HFX Adhesive Adhesive ing Systems MD300 Dispenser HFX-M Mixer HFX Cartridge Standard Silicon Dispenser Product Description Hilti HFX is a new hybrid adhesive mortar combining resin, hardener, cement and
DRILL. DRIVE. DONE. EVERYWHERE.
DRILL. DRIVE. DONE. EVERYWHERE. Screw anchor HUS-/ (SS 316) DBS 11/17 COMBINE THE ADVANTAGES OF SEW ANCHORS WITH SUPERB CORROSION RESISTANCE HUS- 8 11/16 HUS- 10 13/16 The Hilti KWIK HUS-EZ difference
DRILL. DRIVE. DONE. EVERYWHERE.
DRILL. DRIVE. DONE. EVERYWHERE. Screw anchor HUS-/ (SS 316) DBS 11/17 COMBINE THE ADVANTAGES OF SEW ANCHORS WITH SUPERB CORROSION RESISTANCE HUS- 8 11/16 HUS- 10 13/16 The Hilti KWIK HUS-EZ difference
Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
1 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 2 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 3 Note:
l MATERIAL SPECIFICATIONS
SECTION 4.5 PAGE 1 / 5 l DESCRIPTION The UCAN Scru-it masonry anchor is manufactured to strict specifications from high quality steel. The proprietary, UCAN designed, scalloped thread cuts deep grooves
SECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this
SEOKYUNG TSC ALUMINUM RAISED ACCESS FLOORS
SEOKYUNG TSC ALUMINUM RAISED ACCESS FLOORS SK Background and Commitment THE LEADER IN DOMESTIC AND INTERNATIONAL PRODUCTION OF RAISED ACCESS FLOOR SYSTEMS FOR THE CLEANROOM INDUSTRIES. Seokyung TSC (SK)
Power-Bolt PRODUCT INFORMATION. Heavy-Duty Sleeve Anchor PRODUCT DESCRIPTION FEATURES AND BENEFITS. Hex Head Power-Bolt Assembly
Power-Bolt Heavy-Duty Sleeve PRODUCT DESCRIPTION The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable. It is available with a finishe hex hea
EJOT Concrete screws. ETA-approved concrete screws for cracked and non-cracked concrete
EJOT Concrete screws ETA-approved concrete screws for cracked and non-cracked concrete ETA-approved concrete screws for cracked and non-cracked concrete. Self-tapping, approved for push-through instaations.
Page 9 of European Technical Approval ETA-10/0280 Marking: Marking: Identifying Identifying mark: mark: Anchor Anchor identity: identity: Category Category: : S KA H (stainless steel) K (hot dip galvanized)
AC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
ACCeSS HARDWARe BULLeTIN 1008 Rev. 710
SS RDWR BULLTIN PF 8 R e v. 7 PM BRND SS RDWR TYPS PF, PF2, PFM, ND PF2M PNL FSTNR SSMBLIS - S PG 5 Shoulder on retainer provides positive stop during installation. vailable in self-clinching, flaring,
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2011 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
Chem-Stud CHEMICAL SPIN TYPE CAPSULE ADHESIVE PRODUCT DESCRIPTION CHEM-STUD ADHESIVE PROPERTIES
192 Chem-Stud SPIN TYPE CAPSULE ADHESIVE BASE MATERIAL Solid Concrete SIZE RANGE 3" to 1-1" Anchor Rod, No. 3 to No.10 Reinforcing Bar ANCHOR MATERIAL Ester Based Resin PRODUCT DESCRIPTION The Chem-Stud
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2011 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information Drop-In Anchor ProDUCT DESCRIPTION The is a drop-in anchor which shows good performance for competitive price for typical mass applications. It can be used in a
Standard-Duty and Heavy-Duty Tube and Pipe Clamps
Standard-Duty and Heavy-Duty Tube and Pipe Clamps Table Of Contents Evolution of Clamps... 2 Tubing vs. Piping Difference/Comparison... 3 Features/Benefits of Clamps...4-5 Standard-Duty (Light-Duty) Clamps...6-7
Allowable Tension Loads for Drop-In (Stainless Steel) and Coil-Thread Drop-In (Carbon Steel) Anchors in Normal-Weight Concrete
Loads for Drop-In (Stainless Steel) and Coil-Thread Drop-In (Carbon Steel) Anchors in Normal-Weight Concrete 4 (.4) (9.5) 2 (2.7) (5.9) 3 4 (9.) 2 7 8 Material Specifications Anchor Component Anchor Body
CAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT
CAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT THE WELDING PROCESS THE CAPACITOR DISCHARGE (CD) STUDWELDING PROCESS CD Studwelding is generally used to weld smaller diameter studs to thin
Accessories - Universal Safety Heads
Accessories - Universal Safety Heads Pressures to 110,000 psi (7584 bar) Safety Heads/Rupture Discs - Safety Heads and Rupture Discs offer an economical and dependable relief port to guard against system
Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
SECTION - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
System Components. Grades. General Information Installation Information
General Information SECTION CONTENTS AC100-PRO General Information Installation Information Vinylester Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The AC100-PRO is a two-component
Declaration of Performance No1109-CPD-0080 According to the Regulation EU No 305/2011
Item code:aje01 and AJE31 Manufacturer:Tecfi S.p.A. - S.S. Appia, km 193-81050 Pastorano (CE), Italy 1. Intended use Product-type: Metal anchor for use in concrete Anchor type: Technical description of
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
STAINLESS STEEL. Useful Information
STAINLESS Useful Information STAINLESS Useful Information Stainless Steel Grades - Chemical Composition (BS EN ISO 3506-1:2009 / BS EN ISO 3506-2:2009) NOTE 1 A description of the groups and grades of
EJOT Through Bolts. Premium-quality through bolts for fixing in cracked and non-cracked concrete.
EJOT Premium-quality through bolts for fixing in cracked and non-cracked concrete www.ejot.com Anchors and Instaation Technology Premium-quality through bolts for fixing in cracked and non-cracked concrete
SECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and install carbon steel or stainless steel alternating tread stair assemblies in accordance with the requirements
Bolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
Dimensions Mechanical and Performance Requirements. Round Spacers Hex Spacers Round Threaded Female Standoffs...
Spacers & Standoffs imensions Mechanical and Performance Requirements Round Spacers... 295 Hex Spacers... 296 Round hreaded emale Standoffs... 297 Hex hreaded emale Standoffs... 298 Hex & Round hreaded
SpaTec Plus. Mechanical Anchoring 27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION
27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product A high security, high performance, through fixing, torque controlled expansion anchor which has approval
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL SERIES 1 AND 2, BAYONET COUPLING
INCH-POUND 30 August 2013 SUPERSEDING 25 July 2012 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING Reactivated
ULTRAPLUS M12-M36. The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads.
ULTRAPLUS M12-M36 The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads. FUNCTION When the anchor is installed the expansion segments are
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2011 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
8.8 M10/15x90 50Nm. Zinc plated. Mechanically galvanised. PSA anchor. heavy duty vibration resistant removable
Zinc plated 8.8 M10/15x90 50Nm Mechanically galvanised PSA anchor heavy duty vibration resistant removable Edition: April 2011 1 Powers offers the widest range of mechanical and adhesive fasteners in the
Features Advantages Benefits
What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted
BLOCKS- MILLER HI-LIFT BLOCKS
Wide capacity range available Standard capacities to 300T Design factor 4:1 Larger capacities available Sheaves from 8 to 36 Wire rope sizes to 1 ¾ Hooks- high quality forged alloy steel Per DIN 15401
The following excerpt are pages from the North American Anchor Fastening Technical Guide, 2011.
The following excerpt are pages from the North American Fastening Technical Guide, 2011. Contact Hilti s team of technical support specialists between the hours of 7:00am 6:00pm CST for complete details
1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
Easy to Use A7 Saves You Time and Money
ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they
BALL JOINT AS SEM BLIES
od End Ball Joints (Male) Bearing aceway - ocked in by annular groove-trunnion design. BA JOINT AS SEM BIES Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion resistance.
Draft. Not yet Approved. American Railway Engineering and Maintenance of Way Association Letter Ballot
American Railway Engineering and Maintenance of Way Association Letter Ballot 1. Committee and Subcommittee: Committee 4 Subcommittee 6 2. Letter Ballot Number: 04-17-03 3. Assignment: For Board Approval
2. Mill-Thread 2.1 CMT - Vertical Mill-Thread 2.2 CMT - Cutting Data
escription Page 1. hread urning 1.1 SI - ouble Sided hread urning s and oolholders. Mill-hread.1 CM - Vertical Mill-hread. CM - Cutting ata. Mill-hread Solid Carbide.1 M - *rill, hread, Chamfer. M - Cutting
Features Advantages Benefits
What is BoxBolt? A KEE SAFETY PRODUCT BoxBolt Guide - Eurocode 3 / DIN 18800 BOXBOLT is a fully tested and approved blind fixing solution for connecting to hollow section steelwork or where access is restricted
ULTRAPLUS M12-M36. The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads.
ULTRAPLUS M12-M36 LIEBIG The ORIGINAL Anchoring Technology The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads. FUNCTION When the anchor
Cork Institute of Technology. Autumn 2005 Manufacturing Engineering (Time: 3 Hours)
Cork Institute of Technology Bachelor of Engineering (Honours) in Mechanical Engineering Stage 3 (Bachelor of Engineering in Mechanical Engineering Stage 3) Instructions Answer FIVE questions. Answer TWO
NORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING
PRINTED COPY IS UNCONTROLLED NORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING NEXT PAGE --> ROUND CLAMP BAR WDX15-80-0101 EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
F4P lay-in lugs SERIES SPECIFICATION
F4P lay-in lugs SERIES SPECIFICATION Lay-in lugs are ideal for both grounding and continuous loop applications. Made of aluminum alloy and tin plated for low contact resistance, they are suitable for use
MULTI-MONTI Technical Manual
MULTI-MONTI Technical Manual Stand 04/2013 Technical Manual HECO-MULTI-MONTI Contents Instructions for fixing P. 3 Chapter 1 : Admissible loads in concrete as well as P. 4 anchor-characteristics for MMS-6
Page 9, issued on 03. February 2009 Threaded rod M8, M10, M12, M16, M20, M24, M27, M30 with washer and hexagon nut L df h h ef 0 tfix h min Reinforcing bar 8, 10, 12, 14, 16, 20, 25, 28, 32 acc. to Annex
SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.
1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4
Fiberstrut Parts Catalogue
Fiberstrut s Catalogue 1 Technical Information Fiberstrut Fabrication The installation of fiberglass channels and accessories is similar to the installation of metallic channels and accessories. All standard
DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC
METRIC 31 October 2011 SUPERSEDING MIL-DTL-38999/33D 30 May 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC This specification is approved
DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC
METRIC MIL-DTL-38999/33E 31 October 2011 SUPERSEDING MIL-DTL-38999/33D 30 May 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC This specification
SPECIFICATION & DESIGN MANUAL
TM Steel Dropin Internally Threae Expansion Anchor PRODUCT DESCRIPTION The Steel Dropin is an all-steel, machine bolt anchor available in carbon steel an two types of stainless steel. It can be use in
Tomorrows Fastener Materials NKF Haugesund April 14 th 2016
Tomorrows Fastener Materials NKF Haugesund April 14 th 2016 High temperature material (ASME) Carbon steel materials for high pressure + high temperature Bolt material Nut material Temp. range B7 2H -30
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2008 Hilti North American Product Technical Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
Sign & Post Installation. Standard Specifications and Standard Drawings. July 2017 Edition
Standard Specifications Sign & Post Installation Utility Services Department 500 George Street North, Peterborough, Ontario, K9H 3R9 Transportation Division Telephone: 705-742-7771 Fax: 705-876-4621 Sign
DETAIL SPECIFICATION SHEET
INCH-POUND 4 May 2018 SUPERSEDING 6 March 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1. Please refer to the publication in its entirety for complete details on this product
High Strength Epoxy Tested in Accordance with ICC-ES AC308
ADHESIVE ANCHORING SPECIALISTS DESCRIPTION/SUGGESTED SPECIFICATIONS* The 100% epoxy resin and hardener are completely mixed as they are dispensed from the dual cartridge through a static mixing nozzle,
Dock Bumpers and Support Ledgers Racking and Railing Attachments
General Information General Information Power-Bolt Heavy-Duty Sleeve Prouct Description The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable.
Power-Stud PRODUCT INFORMATION. Wedge Expansion Anchor Mechanically Galvanized and Stainless Steel Versions PRODUCT DESCRIPTION
PowerStu TM TM PowerStu Wege Expansion Anchor Mechanically Galvanize an Stainless Steel Versions PRODUCT DESCRIPTION The PowerStu anchor, is a fully threae, torquecontrolle, wege expansion anchor. It is
Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
FINISH SPECIFICATIONS FOR PIERCE NUTS & PIERCE STUDS DETAILED FINISH DESCRIPTIONS AND REQUIREMENTS
FINISH SPECIFICATIONS FOR PIERCE NUTS & PIERCE STUDS DETAILED FINISH DESCRIPTIONS AND REQUIREMENTS S S300 S301 S302 S303 PLAIN- NO SUPPLEMENTARY FINISH REQUIRED OTHER THAN THE FINISH CONSIDERED THE NORMAL
Taper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing bore,
ARC WELD STUDS & ARC STUD WELDING EQUIPEMENT
ARC WELD STUDS & ARC STUD WELDING EQUIPEMENT ARC STUDS GENERAL INFORMATION THE ARC STUDWELDING PROCESS ARC Studwelding is generally used to weld larger diameter studs to thick base metals. ARC Studs may