Terms are net 30 days. Catalog prices are subject to change without notice.

Transcription

1

2 Terms and Conditions OE imum order is $5.00 CEIT EQUIEMENTS ll orders are subject to approval by our Credit epartment. If you are a new account, complete a current application form that we will provide. credit limit will be imposed on new accounts until credit has been established. YMENT TEMS Terms are net 0 days. Catalog prices are subject to change without notice. FEIHT Orders are shipped F.O.. from our manufacturing facility. OE CNCETION material. In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and ETUNE MTEI 5% handling/restocking fee will be applied to all standard products returned for credit. return authorization form and shipping instructions must be obtained in advance before an item can be returned. No returns are accepted after months. CIMS ll claims or product shortages must be made within 0 days of the invoice date. The figures shown are approximate tons required for punching mild sheet steel having a shear strength of 55,000 pounds per square inch. Mfg. age Thickness inear Inches ressure in Tons Canada Tel: Fax:

3 Table of Contents Exacta Tooling - Imperial unches - Head Type, ress Fit... ilot unches - Head Type, ress Fit... 5 Heavy uty unches - Head Type, ress Fit erforator unches Close Centre unches... 7 Quill ushings... 7 ies - Headless / Headed, ress Fit... 8 unches - all-ock, Heavy uty... 9 ilot unches - all-ock, Heavy uty unches - all-ock, ight uty ilot unches - all-ock, ight uty... Knob unches - all-ock, ight & Heavy uty... ies - all-ock... all-ock ccessories... all-ock etainers, Square & End Style... 5 all-ock etainers, Triangle Style all-ock etainers... 7 Forming unches for Headed & all-ock Style... 8 Technical Information... 9 Urethane Sheets, ods, ars & Tubes Urethane Closed End Strippers Materials and Coatings Special Shapes Canada Tel: Fax:

4 UNCHES HE TYE ESS FIT UNCHES H H S H M H HE S HE M H E lank HE H Headed HE Headed HT Headed T=/6 HTE Headed T=/6 SHES C OUN OY Short oint T / oint ong oint Short oint / oint Canada Tel: Fax: ong oint OY engths in / COE Increments Ejct. Kit / / M STN EXTENE Ejct KIT IN SIN SET SCE /8 /6 8 S / **(ST) -/ - -/ -/ - -/ -/ - -/ N/.058 EK / 5 (.06- -/ - -/ EK ) 5/6 oint -/ - -/ -/ EK /8 7 ia -/ - -/ EK /6 - -/ EK / 50 *M - -/ EK /8 6 **(ST) - -/ EK / 75 (.09>) oint -/ - -/ EK /-8 7/8 87 ia -/ - -/ EK / / - -/ EK /-8 * *80 -/ - -/ EK /-8 -/ 5 -/ - -/ EK /6- -/ 50 -/ - -/ EK /6- O OON ECTNE SQUE IUS ECTNE ad STN KEYIN [N VIE] F F S =/8 ia S8 =/6 ia 8 S5 =/ ia 8 NK 7 7 SINE FT OUE FT OE SOTS CUSTOM 5 o OE H T TOENCE +.00 Specify Shape and ody Code in place of MINIMUM OUNS * M supplied on.09 or greater unless otherwise specified. ** S supplied on unless otherwise specified. or cannot exceed body diameter. in lock hole supplied on request. Surface treatments available - see page. HE OY COE ENTH KEYIN SHE x SHES / STN IMENSIONS H C M.5 HE O 7 M -/.99 x.6 F H T /8 /6 / 5/6 /8 7/6 / 5/8 / 7/8 * -/ -/ TI.0005 TI.00 /6 5/6 /8 7/6 / 9/6 5/8 / 7/8 *-/ -/8 -/8-5/8 /8 /8 /8 /8 /6 /6 /6 / / / */8 / / /

5 IOT HE TYE ESS FIT H M H H H HN M HN oint ong oint * oint ong oint Specify Shape and ody Code in place of oint ong oint UNCHES ilot Code H Head ilot arabolic Nose HT Head T=/6 ilot arabolic Nose H Headed ilot ullet Nose HT Head T=/6 ilot ullet Nose HN Headed ilot New ngle Nose HTN Head T=/6 ilot New ngle Nose ilot Nose Style E E E.09 EN. E E iercing unch arabolic Nose ullet Nose ngle Nose.09 ange **Max ead ength OY /8 E OY COE engths in / Increments M STN EXTENE dim -/ - -/ -/ -.06 /6 8 -/ - -/ -/ -.06 / 5 *M -/ - -/ /6 -/ - -/ -/ Standard /8 7 -/ - -/ /6 - -/ / / / / / 75 -/ - -/ /8 87 -/ - -/ / - -/ - 6. * *80 -/ - -/ / 5 -/ - -/ / 50 -/ - -/ onger available. **ead length is automatically added to the dimension ordered. *M- is shipped unless otherwise specified. OE STYE OY COE ENTH H C 6 M.500 SHE H MINIMUM SHES C OUN O OON ECTNE SQUE IUS ECTNE T E ad TOENCE OUNS SHES / TI.0005 TI.00 Canada Tel: Fax:

6 HEVY UTY UNCHES HE TYE ESS FIT 6UNCHES HH HH S HH M HH HHE S HHE M HH E lank HE HH Headed Heavy uty HHE Headed Heavy uty SHES C OUN OY Short oint T / oint ong oint Short oint / oint OY engths in / COE Increments / / M-M STN Ejct KIT Canada Tel: Fax: IN ong oint Ejct. Kit SIN SET SCE /8 7/6 7 8 S / EK58 EK / 50 *M EK /8 6 (ST) EK / 75 -/ EK / - 8 7/8 87 -/ EK / - 8 Not available 00 in long -/ EK / - 8 O OON ECTNE SQUE STN KEYIN [N VIE] F F S =/8 ia S8 =/6 ia S5 =/ ia 8 OE IUS ECTNE ad 8 NK 7 7 SINE FT OUE FT OE SOTS CUSTOM HE OY COE ENTH KEYIN HH C M.5 HHE O 7 M -/.99 x.6 F SHE x 5 o T TOENCE CHMFE SHE CONE SHE OUNS SHES / Specify Shape and ody Code in place of * M supplied on.09 or greater unless otherwise specified. ** S supplied on unless otherwise specified. or cannot exceed body diameter. in lock hole supplied on request. Surface treatments available - see page COMMON SHE NES.8 TI.0005 TI.00 OUE SHE NCE SHE Exacta s Heavy uty type punches are designed to reduce punch loads and broken heads, when punching heavy gauge or high tensile materials.

7 EFOTO UNCHES CT. No Size ange.00 Increments No. SEIES /6 5/ / / / 7/ / / / 9/ / 5/ / / /8 / /8 / /8 7/ /8 5/ /8 / /8 7/ /8 9/ /8 9/ /6 5/ /6 / /6 / /6 / /6 /8 OY code Shank Head ie H T H H.S.S. COSE CENTE UNCHES oint ength ange x CT. No QUI USHINS H T F Q /6 / / /8 / Q / /8 /8 /6 / Q /6 7/6 /8 7/ / Q /8 / /8 / /8 Q /6 9/6 /8 9/ /8 Q / 5/8 /6 /8 /8 Max Standard Stock engths -/ -/ -/ -/ Q SEIES Overall ength -/ -/ -/ ENTHS / -/ -/ -/ H H T +.05 / MIN (x) N = erforator Nib H H (EF) F (MIN 60% of ).0.0 Fillet Fillet STYE +.00 STYE E = erforator ilot NOTE: erforator ilot lead is included in overall length ordered, and not added to length ordered, like standard head type and ball lock pilots. The perforators can be shortened, nib pointed or pilot nosed at an additional charge. C SEIES V SEIES (x) T +.00 MIN Quill bushings are not hardened (x) UNCHES Canada Tel: Fax:

8 8IES HEESS / HEE ESS FIT C OUN O OON ECTNE SQUE IUS ECTNE IE NK ad IE COE ie C ore T ie and Taper FT ie Full Taper H ie Headed (C ore) HT ie Headed and Taper HFT ie Headed Full Taper OY OY engths in /8 COE C OE Increments MIN. M N STN EXTENE IES T FT H HT HFT and C ore and Taper Full Taper SHES N /8 STN KEYIN SINE FT F 8 7 F / o OUE FT F OTION STN.5 /8 ound C ore Style / Max / Shape Canada Tel: Fax: Max C ore Tapered Style / / 5 5/ / - -/ -/8 - -/ /6 5/ / - -/ -/8 - -/ /8 7 /6 / - -/ -/ /6 /6 / - -/ -/ / 50 /6 / - -/ -/ /8 6 /6 / - -/ -/ / 75 /6 / - -/ -/ /8 87 / / - -/ -/ / / - -/ -/ / 5 5/6 / - -/ -/ / 50 /8 / - -/ -/ / 75 /8 / - -/ -/ /8 / - -/ -/ / 5 /8 / - -/ -/ / 50 /8 / - -/ -/ / 75 /8 / - -/ -/ /8 / - -/ -/ F 8 S 7 Headed C ore OE SOTS S =/8 S8 =/6 S5 =/ Headed and Taper SECI OCTIONS View from top of die (N view) 8 7 Headed Full Taper 5 o TOENCE OE OUNS SHES / H Style OY COE & N N H=+.5 Max / TI.0005 TI.00 C 6 -/.00 H O 00 -/.56 x.650 S SHE ENTH KEYIN

9 UNCHES -OCK HEVY UTY H H S H M H HE S HE M HE lank Short oint oint ong oint Short oint Specify Shape and ody Code in place of oint ong oint UNCHES / / OCK COE H all-ock Heavy uty HE all-ock Heavy uty OY OY engths in / COE Increments / / M STN EXTENE Ejct KIT IN Ejct. Kit SIN SET SCE /8 / 5/8 / 7/ S / **(ST) ( ) *M **(ST) (.09>) -/ - 5 -/ - 5 -/ - 5 -/ - 5 -/ / / / / / EK EK58 EK58 EK89 EK / - 8 / / EK / - 8 -/ / EI /6 - OE Style OY COE ENTH H C 50 M.75 HE O 6 M.50 x.560 SHE & NSI Std. all Seat EIEF - imum +.00 TOENCE OUNS SHES / TI.0005 TI.00 * M supplied on.09 or greater unless otherwise specified. ** S supplied on unless otherwise specified. or dimension cannot exceed body diameter. pin lockhole available on request N/C. SHES C OUN O OON ECTNE SQUE IUS ECTNE NK Standard Keying N View Shown vailable Surface Treatments: Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Chromium Nitride (CrN) See Technical Information g. ad 8 7 Canada Tel: Fax:

10 IOT -OCK HEVY UTY UNCHES UNCHES H M H H M H HN M HN oint ong oint oint ong oint Specify Shape and ody Code in place of oint ong oint E E E ilot Code H all-ock Heavy uty ilot arabolic Nose H all-ock Heavy uty ilot ullet Nose HN all-ock Heavy uty ilot New ngle Nose arabolic Nose ullet Nose ngle Nose ilot Nose Style E E E EN. ange **Max ead ength OY /8 7 OY COE engths in / Increments M STN EXTENE -/ - 5 dim.0 / 50 *M -/ /8 6 -/ Standard / 75 -/ /. 7/8 87 -/ / *onger available. ** E length is automatically added to the dimension ordered. NSI Std. all Seat EIEF - imum TOENCE +.00 OUNS SHES / TI.0005 TI.00 E SHES C OUN O OON ECTNE SQUE IUS ECTNE ad OE STYE OY COE ENTH H C 6 M.500 SHE * M Standard is shipped unless otherwise specified. or dimension cannot exceed body diameter. vailable Surface Treatments: Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Chromium Nitride (CrN) See Technical Information g. 0 Canada Tel: Fax:

11 UNCHES -OCK IHT UTY S M E S E M E lank Short oint oint ong oint Short oint Specify Shape and ody Code in place of oint ong oint UNCHES / / OCK COE all-ock ight uty E all-ock ight uty OY OY engths in / COE Increments / / M STN EXTENE Ejct KIT IN Ejct. Kit SIN SET SCE / /8 / 5/8 / **S / **(ST) ( ) *M **(ST) (.09>) - -/ / - -/ - 6 -/ - 6 -/ - 6 -/ - 6 -/ EK EK EK58 EK58 EK / - 8 7/8 87 -/ - -/ EK / / - -/ EK / - 8 * M supplied on.09 or greater unless otherwise specified. ** S supplied on unless otherwise specified or dimension cannot exceed body diameter. pin lockhole available on request N/C. NSI Std. all Seat EIEF -/ imum Standard Keying N View Shown 8 7 SHES C OUN OE O OON ECTNE SQUE HE COE OY COE ENTH IUS ECTNE ad NK C 7 M -/.50 E 50 M -/.87 x.75 SHE & TOENCE OUNS SHES / TI.0005 TI.00 vailable Surface Treatments: Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Chromium Nitride (CrN) See Technical Information g. Canada Tel: Fax:

12 IOT -OCK IHT UTY UNCHES UNCHES M M N M N oint ong oint oint ong oint Specify Shape and ody Code in place of oint ong oint E E E arabolic Nose ullet Nose ngle Nose ilot Code all-ock ight uty ilot arabolic Nose all-ock ight uty ilot ullet Nose ilot Nose Style E.09 E.09 ange **Max ead ength / OY / 5 OY COE engths in / Increments M STN EXTENE dim - -/ - 5-/.057 /8 7 *M - -/ -/ - 5-/.0 / / - 5-/.5 Standard 5/ / - 5-/.5 / 75 -/ - -/ - 5-/. 7/8 87 -/ - -/ - 5-/. 00 -/ - -/ - 5-/. onger available. ** E length is automatically added to the dimension ordered. N all-ock ight uty ilot New ngle Nose E EN NSI STN SET EIEF / MINIMUM E +.00 *M Standard is shipped unless otherwise specified. or dimension cannot exceed body diameter. TOENCE OUNS SHES / TI.0005 TI.00 vailable Surface Treatments: Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Chromium Nitride (CrN) See Technical Information g. OE STYE OY COE ENTH C 6 M.500 SHE Canada Tel: Fax:

13 UNCHES KNO -OCK K HK EK HEK Specify Shape and ody Code in place of Specify Shape and ody Code in place of UNCHES -OCK COE K all-ock ight uty Knob EK all-ock ight uty Knob HK all-ock Heavy uty Knob HEK all-ock Heavy uty Knob OY OY COE M / 50 STN ENTHS Max / KIT IN Ejct. Kit SIN SET SCE.50.6 EK / EK / EK / - 8 * - -/ - 7/ EK / EK / - 8 -/ EK /6 - OE NSI Std. all Seat TOENCE - imum OUNS EIEF +.00 SHES / HE COE OY COE ENTH TI.0005 TI.00 HK C HEK x.560 SHE & SHES C OUN Standard Keying N View Shown 8 7 O OON ECTNE SQUE IUS ECTNE ad *Standard is shipped unless otherwise specified. pin lockhole available on request N/C. Special lengths supplied upon request. Special supplied upon request. vailable Surface Treatments: Titanium Nitride (TiN) Titanium Carbonitride (TiCN) Chromium Nitride (CrN) See Technical Information g. NK Canada Tel: Fax:

14 -OCK IES -OCK IES -OCK COE ie all-ock ight uty OY OY COE M. and ound Shape Max. / Shape Max. C ore / 50 5/ /8 6 / / 75 / /8 87 / / / 5 5/ I N / 50 / SHES C OUN -/ 75 / O OON ECTNE SQUE IUS ECTNE IE NK OIENTTION 8 TOENCE OUNS SHES / ad TI.0005 TI.00 7 The Standard all Seat location is at 90. lternate locations of 0, or 80 or 70 can be specified. Custom all Seat locations can be specified at any degree counterclockwise from 0. -OCK CCESSOIES unch uller ia. escription / etainer Spring / etainer all 5/6 etainer Spring 5/6 etainer all /8 etainer Spring /8 etainer Spring Fits etainer Style / & /8 ight uty / & 5/8 ight uty / - -/ ight uty /8 Heavy all ock elease Tool / etainer Spring / etainer all / etainer Spring / etainer all / - -/ Heavy uty Extra Heavy uty Canada Tel: Fax:

15 -OCK ETINES SQUE & EN STYE For piercing material up to /8 For piercing material up to / J.6 E E Y For.5 ia. owel E E Screw Size.5 For.750 ia. owel.56 For /8 Screw.5 HEVY UTY SQUE TYE CT. No Old No. E Canada Tel: Fax: Screw Size HS /8-6 HS /8-6 HS /8-6 HS / - HS / - HS / - IHT UTY SQUE TYE CT. No E E For.5 ia. owel Old No. E Screw Size S / - 0 S /6-8 S /6-8 S /6-6 S /8-6 S /8-6 S /8-6 S /8-6 S /8-6 S /8-6 HEVY UTY EN TYE CT. No Old No. J Y HE HE o HE HE HE HE For piercing material up to /8 For piercing material up to /8 E E Screw Size IHT UTY EN TYE CT. No etainer sets include backing plate, ball, spring, screws and dowels..5.5 Old No. H For.5 ia. owel E5 K.5 H J K E C/ E E E E E E E J For /8 Screw.5 5-OCK ETINE

16 TINE STYE Order Information -OCK ETINES Slip fit for.500 dowel pin In-line dowel hole slip fit (see chart) -OCK IES etainer Includes: all & Spring Screws ound ir Vented owel ins Note: ll / dowels are tapped for easy removal all elease Set Screw Jam Screw for ccess Hole Specify: Quantity and Catalogue Number Example: 6 pcs., HT50 6 pcs., HT50 rind Third owel **The third dowel hole is ground slip fit for a.500 dowel pin, see example. aser Fused ccess Hole through backing plate for spring & ball removal X EF. ight duty.5 Heavy duty.6 Y () See Order Information** IHT UTY TINE CT. No ef. No. C X Y IN-INE OE SCE SIZE T /6-8 x.50 T /6-8 x.50 T /8-6 x.50 T /8-6 x.50 T /8-6 x.50 T87 * /8-6 x.50 T / - x.75 HEVY UTY TINE HT /6-8 x.50 HT /8-6 x.50 HT /8-6 x.50 HT /8-6 x.50 HT87 * /8-6 x.50 HT / - x.75 HT / - x.75 *Furnished with backing plug instead of backing plate. C etainer set includes: acking late, all, Spring, Screws & owels 6 Canada Tel: Fax:

17 -OCK ETINES * Ø "" Ø "C" Ø "" "" CKE TE UNCH TE "E" HEVY UTY IHT UTY INSET INSET SECIFICTIONS.87 "" ± unch ia. Hole Center to Center Insert Hole ia. C Canada Tel: Fax: Ø "H" ±.005 Head C-ore ia. IHIS IHIS IHIS IHIS IHIS IHIS IHIS5 * IIS IIS IIS IIS IIS IIS IIS Ø "" ±.000 Ø "" late Thickness E.8.00 HEVY UTY IHT UTY *Tolerance for.50 punch/ hole is /+.000 INSET unch ia. Insert ia. Head ia. IHIS IHIS IHIS IHIS IHIS IHIS IHIS IIS IIS IIS IIS IIS IIS IIS H ength OCK ETINE

18 FOMIN UNCHES HEE N -OCK STYE COUNTESINK UNCHES CK SEIES ody OTHE COMONENTS OE Style Code ody Code ength Keying HCK C Shape S Code vailable in both Headed and all-ock styles (specify) EXTUSION UNCHES X SEIES OE Style Code ody Code ength X C Shape Code 8 o INC ody O S vailable in both Headed and all-ock styles (specify) O OFFSET EJECTO ITH HEE OE Style Code ody ia. ength Keying H OEH 6 M.50 x.75 ST.50 Shape Code & HEE vailable in both Headed and all-ock styles (specify) ody.0 HEE.5 Heel will be shipped if not specified THE FOMIN TOOS ierce unch Thread Form unch Thread ody 6 6 Size ia. H S Thread Size ody ia. OE STYE MT THICKNESS H TF0 SHE /-.65 5/ Thread Form ie Canada Tel: Fax:

19 TECHNIC INFOMTION UNCH 90 MTIX IE o FTS HEE OUCTS HEESS OUCTS F=.5 F= (F) N VIE from the head end, of a punch shows the point shape with dotted lines. EFECTE VIES 8 N VIE of a die shows the shape with solid lines. HE TYE TOOIN Standard ocking evice orientation is at OCK TOOIN Standard ocking evice orientation is at 90. eflected View - unches The eflected View is the view as seen in a mirror when held below a punch or guide in its operating position. NOTE: Must identify as EFECTE VIE on punch drawing. FF F OE SOTS INSO OCK HEE OUCTS HEESS OUCTS C C F F F =.5 (Standard) S F.00 F=.065 (Standard) F = Single Flat F = ouble Flat FF = Full ength Flat - specify Flat epth or F im S=.5 + / owel S=.See Chart owel S IMENSION O S S S TECHNIC INFOMTION SU UIN OTIONS To order: specify your ie size Total clearance Material type Material thickness. =.05 [.89mm] Clr. =.00 [.mm].50 OCK KEY K SU HUE die grabs the slug just below the cutting surface of the die and retains the slug during the stripping process. recision nips extend the entire height of the die, helping to guide the slugs through the relief. The nips hold the slugs in the die and drag them through the relief when IE TO the next hit takes place. This allows for less galling and slug packing when stamping materials such as aluminum and galvanized steel. SU HUE Slug Hugger retains slugs with the assistance of cavities that have been carved on the inside of the die. These cavities create a vacuum seal that holds the slug in place after the hit occurs. hile the can be used with any material thickness, it is ideal for stamping thinner materials and is recommended for clearances of less than.059, [.5mm]. Canada Tel: Fax:

20 UETHNE SHEETS, OS, S, TUES UETHNE Cataloged standard sizes in 90 Shore urometer are available from stock for most all needs. Urethane has extreme load-bearing capacity and is abrasion resistance. Urethane has excellent resilience and memory qualities and returns to its original shape with minimal deterioration. It is unaffected by oil, grease and most chemicals and solvents. UETHNE offers more than times the wear life characteristics of natural rubber. ill not mar, scratch, dent or gouge most painted, galvanized or soft metal surfaces. Ideal for pressure pads, forming blocks, stripping pads, draw dies, e bossing dies, bulging punches, strippers, springs or shedders. UETHNE is also available in the full range of hardnesses for that SECI JO. Solid ars ars may be used in press brake tooling, as pressure pads or as a replacement for long rows of steel springs. Solid ods ods of UETHNE are incomparable in bulging operations, roll forming and as individual springs. UETHNE* forms any angle, adapts to practically any shape and is easy to install for a wide range of metalworking and stamping operations. UETHNE* helps to eliminate wrinkles caused by drawing in the air. UETHNE* produces better definition and sharper bends Mar-free tubular and even convolute forms can be bulged with longlasting UETHNE* Standard Square Standard ength urometer Shore Hardness Colour Code CT. No US US5 US7 US50 US6 US75 US00 US5 US50 US00 CT. No Ux Ux Ux Ux Ux Ux Ux Ux U SHEETS THICKNESS S Max. eflection 60 Yellow 0% 80 lue 0% ST 90 reen 5% 95 ed 0% 75 lack 5% /8 / /8 / 5/8 / -/ -/ THICKNESS x x x x x x x x x CT. No U U5 U7 U50 U6 U75 U87 U00 U U5 U50 U00 U50 U00 U00 U600 OS Standard ength THICKNESS /8 / /8 / 5/8 / 7/8 -/8 -/ -/ -/ 6 Stocked hardness 90 urometer. Other hardness and sizes available upon request. I.. O.. TUES - IHT UTY CT. No I.. O.. UT8 UT5 UT UT7 UT50 UT6 UT75 UT87 UT00 /6 / 5/6 /8 / 5/8 / 7/8 /6 / /6 7/8 -/8 -/8-5/8 -/ TUES - HEVY UTY CT. No I.. O.. UTH50 UTH6 UTH75 UTH87 UTH00 / 5/8 / 7/8 -/8 -/ -/ -/ TUES EXT HEVY UTY CT. No I.. O.. UTEH50 UTEH6 UTEH75 UTEH87 UTEH00 UTEH5 UTEH50 / 5/8 / 7/8 -/ -/ Standard ength -/ -/ -/ -/ -/ -/ 0 Canada Tel: Fax:

21 UETHNE COSE EN STIES hard, tough urethane with extreme loadbearing capacity and abrasion resistance, also offers the desired resilience for extensive deformation with minimum deterioration. Urethane Strippers assure positive stripping and at the same time dampen punch vibration by gripping around the punch point. The closed end feature holds thin stock flat during the stripping cycle, eliminating the potential for rejected parts. CT. No Fits unch Shank () O.. UCS5 / / UCS 5/6 /6 UCS7 /8 7/8 UCS50 / UCS6 5/8 -/8 UCS75 / -/8 UCS87 7/8-5/8 UCS0 -/ ength -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 80 Canada Tel: Fax: pproximate Stripping ressure vailable at eflection Indicated /8 / / ush On ir Hole unch shape in end of stripper O.. I.. / HNESS 95 SHOE (E) HO TO OE: EXME Qty. CT. No ength 66 UCS5 -/ unch Material UETHNE

22 MTEIS N COTINS ilson Tool Canada provides all their standard tools in M tool steel. ll heavy duty headed style punches are made from Ultima M tool steel as standard. Ultima M tool steel is specially formulated to increase performance and wear resistance, making it ideal for some of the industry s demanding applications. OTEC: very high abrasion and temperature resistant coating. Micro hardness of 00 and a low coefficient of friction against. steel. Superior for punching and forming tools and where lots of heat is generated from fast punching. OTEC US: multi-layer coating that combines nitride and V to produce a high resistance surface with a very low coefficient of friction. TITNIUM NITIE is the original V coating with its typical gold coloration. The Ti N layer is usually - microns thick and is very hard (Equivalent to c80/8), and gives excellent wear and galling resistance in light to medium stamping operations. The core hardness of M is unaffected by this process but the core hardness of air hardening steels ( & ) typically will drop to points to (c57/59). TITNIUM CO-NITIE can exist over a range of compositions and the coloration can vary from bronze, through pink to grey. This coating is usually -5 microns thick, with an equivalent hardness of c 86/90 and is extremely abrasion resistant. n excellent choice when stamping abrasive high tensile strength materials. The temperature of application is the same as for Ti N (600 deg F/850 degrees F) and as such does not effect the core hardness of M, but will drop and by to points (c57/59). CHOMIUM NITIE is metallic silver in colour, with an equivalent of C76/80. CrN can be deposited thicker that TiN or TiCN and still have excellent adhesion. Usually the first choice for extrusion and piercing of heavier gauge materials, its galling resistance is excellent. CYOENIC TETMENT can be applied to all tool steels including M, and, but is also successful on O-, S-7 and 500. This is a process that affects the whole tool. y taking the tool down to -0 degrees F the microstructure of the steel is modified and homogenized resulting in a tougher steel (less chipping), increase in wear resistance, and will hold long term dimensional tolerances better than any other treatment. must for close tolerance, heavily loaded tooling such as fine - blanking. Can be used in conjunction with any of the other surface enhancements. Canada Tel: Fax:

23 Tel: Canada Fax: NOTES SS- SS- SS- SS-5 SS-8 SS-7 0 SS-0 SS- SS- SS- SS- SS-7 SS-8 SS-9 SS-0 SS- SS- SS- SS- SS-5 SS-6 SS- SS- SS-6 SS- SS- SS- SS-5 SS-6 SS-8 SS-9 SS-59 SS- CONE HEE SS-5 EE HEE SS-0 SS-9 SS-5 SHE CUSTE SS-6 SS-97 ETTE STM 5 SS-9 CENTE UNCH SS-9 IUS CONE 700 -Y CONE CO SS-9 OUE IUS CUT OFF 0 00 SS-5 SS-6 SS-86 SS SS-7 SS-8 SS-0 SS-56 OUN CUSTE SS-60

24 ISON TOO INTENTION O HEQUTES ilson Tool International - United States Tel (Free): Tel: Fax (Free): Fax: sales@wilsontool.com NOTH MEIC ilson Tool - Canada unching and Stamping ivision Tel: Fax: ilson Tool - Canada ress rake ivision Tel: Fax: bending@wilsontoolcanada.com ilson Tool - Mexico Tel: 5 (8) Fax: 5 (8) americalatina@wilsontool.com SOUTH MEIC EUOE / MIEST / FIC ilson Tool - United Kingdom Tel (Free): Tel: Fax (Free): Fax: or 6 sales@wilsontool.eu.com ilson Tool - ermany Tel (Free): Tel: Fax (Free): Fax: verkauf@wilsontool.eu.com ilson Tool - enmark Tel (Free): Tel: Fax (Free): Fax: sales@wilsontool.dk ilson Tool - France Tel: + (0) Fax: + (0) ventes@wilsontool.eu.com Toolspress - Italy Tel: / Fax: info@toolspress.com ilson Tool - rgentina Tel: ventassudamerica@wilsontool.com Milling uncionadeiras - razil Tel/Fax: vendas@milling.com.br CHIN / CIFIC IM ilson Tool - China Tel: Fax: sales@wilsontool.cn E60C 06 ilson Tool International