PROTECT YOUR ASSETS. Kuopiovej Svendborg. Denmark

Size: px

Start display at page:

Download "PROTECT YOUR ASSETS. Kuopiovej Svendborg. Denmark"

Neil Goodman
6 years ago
Views:

PROTECT YOUR ASSETS Kuopiovej 20. 5700 Svendborg.

1 PROTECT YOUR ASSETS Kuopiovej Svendborg. Denmark

2 2 3

SH GROUP SERVICES Our key focus is providing service that is specific to your equipment and plant - before, during and after the individual projects.

Our higly skilled technicians follow the highest safety standards and hold all necessary approvals and certificates working both onshore and offshore.

Hydraulic & mechanical service Surveys/Inspections Service & maintenance Overhaul/Exchange of equipment Supervision during overhaul Trouble-shooting Hydraulic design/upgrade Mechanical design/upgrade

Overhaul of drilling equipment We have years of experience in doing major classifications of drilling equipment: PDM, PLS, PRS, pipe conveyers, top drives, Iron roughnecks, rotary tables, crown

stored. The technology used by SH Group allows your equipment to be put into service immediately.

3 SH GROUP SERVICES Our key focus is providing service that is specific to your equipment and plant - before, during and after the individual projects. SH Group delivers customized service solutions and take care of all service aspects related to the offshore, marine, wind and industrial sectors. Our higly skilled technicians follow the highest safety standards and hold all necessary approvals and certificates working both onshore and offshore. Our services range from the development of tailor-made maintenance concepts, to inspections, overhauls and repairs. Hydraulic & mechanical service Surveys/Inspections Service & maintenance Overhaul/Exchange of equipment Supervision during overhaul Trouble-shooting Hydraulic design/upgrade Mechanical design/upgrade Crane/Davits service with CRALOG Hydraulic pipe installations Manpower Hose Management Design your service package Identification and tagging Pre-fabrication of hoses On-site fabrication Exchange Overhaul of drilling equipment We have years of experience in doing major classifications of drilling equipment: PDM, PLS, PRS, pipe conveyers, top drives, Iron roughnecks, rotary tables, crown blocks, cranes, hydraulic cylinders and hydraulic power units etc Preservation With VpCI technology your equipment is clean and ready for immediate use regardless of how long the equipment has been stored. The technology used by SH Group allows your equipment to be put into service immediately. VpCI technology consists of: Vapour phased Typically used in electrical cabinets Surface protection Wax and grease with corrosion inhibitor Wrapping Protects equipment from outside conditions like snow, rain, dirt, salt, sand and UV light Electrical and automation service SH Group are specialized in manufacturing of control panels and automation for the industry, offshore and maritime sector. SH Group perform service on/off-shore and marine. Project/Field Management - Commissioning Efficient project management puts the right person on the job to resolve issues faster and boost customer satisfaction. The SH Group team becomes your single point of contact and will organize and manage all related issues according to schedule at your site. OEM Service We offer customised service, maintenance and modification to all Sepro systems and equipment Xervo systems and equipment NorCrane systems and equipment These services are either as a part of a single contract, a frame agreement or as an aftersales service. Service and trouble-shooting Upgrade Re-certification / re-commissioning Yearly maintenance service 4 5

HYDRAULIC & MECHANICAL SERVICE Hydraulic service Service of hydraulic power packs and systems Component overhaul of pumps, motors, valves, cylinders etc.

system on-site Trouble-shooting Upgrade of existing equipment Hydraulic supplies Hydraulic power packs Components / spare parts Design of HPU and systems SH Group keeps a large stock of Parker and

All our hydraulic service engineers are professionally trained and carry all required certificates to work on the Norwegian continental shelf.

We are trained and qualified to inspect, maintain and repair all types of lifeboats, MOB boats, davits and cranes.

1/Circ 1206, regardless off flag Hydraulic pipe installations We offer hydraulic pipe installations in the highest quality to ensure maximum uptime and optimal performance of your hydraulic system.

4 HYDRAULIC & MECHANICAL SERVICE Hydraulic service Service of hydraulic power packs and systems Component overhaul of pumps, motors, valves, cylinders etc. or fabrication of new Wellhead panel services Pressure testing / flushing of hydraulic systems Pipe installations up to Ø115 x 15 mm on-site Hose management Hose replacement and implementation of tag system on-site Trouble-shooting Upgrade of existing equipment Hydraulic supplies Hydraulic power packs Components / spare parts Design of HPU and systems SH Group keeps a large stock of Parker and Danfoss pumps and valves, together with hoses, fittings and connectors. All available with a short lead time. All our hydraulic service engineers are professionally trained and carry all required certificates to work on the Norwegian continental shelf. Crane service with CRALOG SH Group s hydraulic engineers have completed the CRALOG training program. We are trained and qualified to inspect, maintain and repair all types of lifeboats, MOB boats, davits and cranes. Marine & offshore cranes, B1 certified Mandatory 1 and 5 years survey Load test Overhaul of cylinders & gears 24/7 service We fulfil requirements stated in IMO MSC.1/Circ 1206, regardless off flag Hydraulic pipe installations We offer hydraulic pipe installations in the highest quality to ensure maximum uptime and optimal performance of your hydraulic system. We plan, design and install systems from small to major projects for various types of equipment all over the world. We can meet all required standards and take care of 3rd party classification. Stainless and carbon steel seamless pipes < Ø42 mm Walform or EO2 form is preferred > Ø42 mm 37 flare or retain ring flange systems Pipe prefabrication services Prefabrication provides the basis for a fast, easy and reliable installation of complex piping systems. Bending from Ø6 mm to Ø115 x 15 in workshop or on-site Pipe-end forming Flaring Grooving Walforming Pressure testing and flushing Coating 3D draft to prefabrication We pressure tests and perform flushing in accordance with SH Group procedures or customer requirements. Flushing Electrical flush units Diesel-powered flush units Mobile particle counter Mobile flushing unit Manpower Worldwide stationing Maintenance / conversion / adaption Punches Check of yard performance Maker commissioning SH Group, Sepro, Xervo, Nor Crane Equipment protection and preservation Qualified teams of any size to any assignment 6 7

OVERHAUL OF DRILLING EQUIPMENT They are strong technicians with a good support base and good subcontractors if required. They have provided thoroughly documentation designed according to our wishes.

Emil Bak-Rasmussen, Maintenance Supervisor - Maersk Drilling Overhaul is the key to efficient operation We have years of experience in carrying out and participating in major classifications of

When scopes of work are well defined, we are ready to continue all the way to commissioning.

etc., we do the following: Check tolerances NDT Change spare parts delivered from maker Exchange hydraulic hoses Overhaul of hydraulic cylinders and valves Check of hydraulic and mechanical

5 OVERHAUL OF DRILLING EQUIPMENT They are strong technicians with a good support base and good subcontractors if required. They have provided thoroughly documentation designed according to our wishes. SH Group has people enough to lift a task like ours, which required 24-7 work for a period to overhaul the equipment as quickly as possible. Emil Bak-Rasmussen, Maintenance Supervisor - Maersk Drilling Overhaul is the key to efficient operation We have years of experience in carrying out and participating in major classifications of drilling equipment. Scope of work In close co-operation with the customer, we define scope of work of each individual system. When scopes of work are well defined, we are ready to continue all the way to commissioning. Inspection & preparation on-site We go offshore with PLC and hydraulic personnel and project managers, first of all to inspect the installations, but also in order to start disassembling the equipment during transfer to yard stay. Overhaul of equipment When we do classifications of PDM, PLS, PRS, pipe conveyers, top drives, iron roughnecks, rotary tables, crown blocks, main cranes, hydraulic cylinders and hydraulic power units etc., we do the following: Check tolerances NDT Change spare parts delivered from maker Exchange hydraulic hoses Overhaul of hydraulic cylinders and valves Check of hydraulic and mechanical conditions Certified welding Surface treatment Test of component performance Test of system performance Installation and commission On-site solution We offer to place 2 pcs. 20 containers to fabricate MED certified hydraulic hoses fully flushed and pressure tested in a test bench. The containers are certified in accordance with class. Innovation and upgrade In close co-operation with customer and rig crew we redesign end invent new functions; rerouting of raw water pipes, wash & dope machines to drill pipes, reinforcement of hydraulic cylinder to PLS. We perform upgrade of clamping systems and jack-up systems etc. State-of-the-art knowledge Our employees participate in on-going offshore training and courses to keep their skills and safety up-to-date. As backup to our onsite personnel, our technical department in Denmark uses advanced 3D CAD programs and FEM analysis programs to design and calculate the best solution for you. 8 9

HOSE MANAGEMENT Design your service package We can help you with identification, fabrication and exchange of your hoses on-site.

After changing the hoses, we can help you implement data in your own Enterprise Asset Management (EAM) system that tells you all about the hoses and when replacement is needed.

Mobile hose containers We have two well-equipped 20 feet containers that enable us to produce hoses on-site.

During pressure test, all hoses are flushed with hydraulic fluid and we ensure cleanliness of the fluid to fulfil ISO 4406:1999 17/15/12 equivalents to NAS 1638 class 6.

6 HOSE MANAGEMENT Design your service package We can help you with identification, fabrication and exchange of your hoses on-site. With this customised solution we minimize the risk of mistakes, because we perform the measurement and fitting on-site and install it right away a quick and easy solution for you! After changing the hoses, we can help you implement data in your own Enterprise Asset Management (EAM) system that tells you all about the hoses and when replacement is needed. We can make a complete hose management system, where we implement hose lists and maintenance schedules in your existent EAM system. Mobile hose containers We have two well-equipped 20 feet containers that enable us to produce hoses on-site. All hoses are manufactured in accordance with the strict rules mentioned in the Marine Equipment Directive 96/98/EC (MED). SH Group is MED certified body by DNV. During pressure test, all hoses are flushed with hydraulic fluid and we ensure cleanliness of the fluid to fulfil ISO 4406: /15/12 equivalents to NAS 1638 class 6. After pressure test and flushing, the hoses are sealed and ready for installation. The hoses are supplied with MED certificate, pressure test certificate, and a customised hose list. We provide tagging of hoses and deliver low frequency chip, if required. Container 1 Manufacturing of MED certified hoses Our professional hose technicians are certified for hose manufacturing and hose management systems Container 2 Pressure testing of hoses with hydraulic fluid Pressure testing bench up to 1,200 bar 17,000 PSI Flushing 10 11

PRESERVATION WITH TECHNOLOGY Real-life test of liquid preservation with and without VpCI VpCI rust remover - before and after inside VpCI installed Water injection on rig (open deck) wrapped after

SH Group offers a new solution! Why preserve equipment? Preservation is the practice of preventative maintenance on equipment and systems primarily against the degradations caused by climate.

An effective preservation protocol can significantly extend the working life of your Additionally, the technology used by SH Group allows your equipment to be put into service immediately.

Equipment that has been stored with VpCI technology does not require any cleaning or preparation before installation and commissioning.

7 PRESERVATION WITH TECHNOLOGY Real-life test of liquid preservation with and without VpCI VpCI rust remover - before and after inside VpCI installed Water injection on rig (open deck) wrapped after commissioning Only a micrometre thin layer is necessary to protect the product SH Group uses the newest advancements in VpCI (Vapour phase Corrosion Inhibitor) technology for protecting offshore equipment. Traditional corrosion protection methods are often messy, time consuming, and costly to apply, and require a significant amount of work to be removed before the equipment can be ready to use. SH Group offers a new solution! Why preserve equipment? Preservation is the practice of preventative maintenance on equipment and systems primarily against the degradations caused by climate. In the harsh offshore environment, preservation focuses on corrosion and is appropriate for equipment assets that are in storage, in transport, or in use. An effective preservation protocol can significantly extend the working life of your equipment. Additionally, the technology used by SH Group allows your equipment to be put into service immediately. Why use SH Group? We combine many years of experience in the offshore industry with the newest technology in corrosion prevention. Equipment that has been stored with VpCI technology does not require any cleaning or preparation before installation and commissioning. With VpCI technology your equipment is clean and ready for immediate use regardless of how long the equipment has been stored. We have a highly trained preservation crew for onand offshore applications that works globally. Their speciality is offshore rig equipment and they can provide preservation services to equipment that is in storage, in use, or being decommissioned for short or long term storage. In addition to heavy equipment, VpCI technology is especially suited for preservation and corrosion prevention in electrical installations. Because it works on a molecular scale it is able to penetrate and protect inaccessible areas typically found in electronic enclosures. Our services The SH Group preservation team can provide comprehensive start-to-finish services of individual components of a complete preservation protocol. The following is a short list of services that serve as a starting point for you preservation considerations. A preservation procedure developed specifically to fit your project or installation Preservation project management Integration of preservation procedure and schedule into existing operation and maintenance programs Complete overview of preservation products for the project or installation Marking and sealing procedures Preservation program for spare parts on stock Short and long-term preservation Highly trained preservation team of project engineers world-wide Preservation methods Vapour phased Typical used in electrical cabinets Surface protection Wax and grease with corrosion inhibitor Wrapping Protects equipment from outside conditions like snow, rain, dirt, salt, sand and UV light Typically the need for preserving equipment arises in connection with 5-year classifications of equipment where the owner wants to achieve a care-free twoyear period after the classification. Preservation is also relevant when equipment is being supplied from manufacturer to yard, when the rig leaves the yard, or when rigs are taken out of service temporarily

ELECTRICAL AND AUTOMATION SERVICE Executing excellence SH Group s Project and Software Department consists of highly qualified engineers and technicians, specialized in manufacturing of control

Electrical installation on board ships and offshore according to customer specified standards Trouble shooting in any electrical installation We have at our disposal a team of electricians and

which can be delivered in DWG format Supplier of Ex panels according to ATEX and IECEx Thermographic inspection Certified to repair and overhaul CEMP Ex electric motors We connect and test umbilicals

8 ELECTRICAL AND AUTOMATION SERVICE Executing excellence SH Group s Project and Software Department consists of highly qualified engineers and technicians, specialized in manufacturing of control panels and automation for industrial, offshore and maritime sectors. Specialized service SH Group comprises a service and installation department that offers competent and fast service. Electrical installation on board ships and offshore according to customer specified standards Trouble shooting in any electrical installation We have at our disposal a team of electricians and software engineers with certificates for offshore jobs worldwide Project management Electric construction Software development PLC, HMI, Scada We offer wire diagram update in PCSchematic and Caddy++, which can be delivered in DWG format Supplier of Ex panels according to ATEX and IECEx Thermographic inspection Certified to repair and overhaul CEMP Ex electric motors We connect and test umbilicals with high voltage core and fibres. We have at our disposal instruments for installation and documentation. We update hydraulic installations with wireless control - this offers new possibilities and safety. Wireless controls are also available for hazards areas for both Ex zone1 and 2 (ATEX, IECEx)

WELDING At SH Group we have got excellent facilities to carry out

international marine, offshore, oil, gas & wind industries.

highly qualified and experienced welders, We can handle extensive

Repair work of more than 430-metre long legs belonging to jack-up

We are specialists in complex welding and in particularly in

At the same time keeping up with official offshore classification

9 WELDING At SH Group we have got excellent facilities to carry out any repair work or advanced customized solutions for the international marine, offshore, oil, gas & wind industries. With a strong Projects- and Engineering Department combined with highly qualified and experienced welders, We can handle extensive projects e.g. Repair work of more than 430-metre long legs belonging to jack-up rigs or retrofit of any vessel type or equipment. We are specialists in complex welding and in particularly in high-tensile steel which require special treatment and handling. At the same time keeping up with official offshore classification requirements. In daily production, we handle voluminous and heavy structures next to our production of subsea handling systems and lifting equipment for the wind industry

PROJECT/FIELD MANAGEMENT Commissioning Whether you are purchasing new equipment or upgrading existing we have a team ready to assist and support you - no matter what your requirements are.

10 PROJECT/FIELD MANAGEMENT Commissioning Whether you are purchasing new equipment or upgrading existing we have a team ready to assist and support you - no matter what your requirements are. Efficient project management puts the right person on the job to resolve issues faster and boost customer satisfaction. SH Group offer a wide range of experienced and dedicated technicians, supervisors and managers ready to assist. We work individually or in teams depending on scope of work. The SH Group team becomes your single point of contact and will organize and manage all related issues according to schedule at your construction site. Single point of contact Experienced team for installation & commissioning in the marine and offshore industries On-time, on-budget, with documentation and in compliance Disciplines Project Management Commissioning Supervising Hydraulic Mechanic Electrical Thermographic ATEX NDT I/O-test Automation Systems Pipe systems Hydraulic systems Winches A-Frames Cranes/Davits Engine/Propulsion Deck/Cargo equipment Wheelhouse systems Alarm/Shutdown systems Hose Management Your expectations Budgetary proposal for the project up-front Dedicated project leadership in close co-operation with you Support of additional personnel when requred Long-term co-operation, not only a supplier Documentation package fulfilling your requirements and not just a standard solution We work together with our customers to ensure our assistance is viable and improves the equipment performance. We care about your project as if it were our own equipment. Co-operation and understanding your needs drives us forward. 24 hours Within 24 hours, we can assist you all over the world. With locations in Denmark, Norway, Singapore, China and Houston in the US we are close to your mobilization point. 24/7 Service Phone:

OEM SERVICE Long-term thinking with OEM service The best way to protect your valuable

We have the qualifications to make any modification, recertification and re-commissioning

Our in-house automation department has access to all the software and programming for easily

We have a well-assorted spare parts shop and facilities to carry out any service task.

for A-frames, winches and other handling equipment.

used, and we will recommend a service programme for you.

11 OEM SERVICE Long-term thinking with OEM service The best way to protect your valuable equipment is to take advantage of the manufactures knowledge of your product. We have the qualifications to make any modification, recertification and re-commissioning easily and quickly with all your data stored. Our in-house automation department has access to all the software and programming for easily adding new functions and adjust/adapt to new applications and standards. We have a well-assorted spare parts shop and facilities to carry out any service task. At the headquarters in Svendborg, we have unique testing facilities with dedicated test areas for A-frames, winches and other handling equipment. Our engineers know your product from top to toe and the durability of each mechanical part used, and we will recommend a service programme for you. It will extend the lifetime of your product, and save you time and expenses. If your product has been taking out of service for a period, we can help you with re-commissioning and getting the right approvals for putting it into service again. 24/7 Service Phone:

12 22 23

13 QUALIFIED SERVICE - 24/7 Service Phone We are certified according to ISO 9001:2008 by DNV and qualified in Achilles JQS ABOUT SH GROUP SH Group is an international company in the development, production and servicing of hydraulic and mechanical system solutions for the offshore, marine and industrial sectors. We provide a wide range of high-end technology solutions and services within customised deck equipment solutions, systems for subsea handling operations and lifeboat solutions approved for SOLAS and NORSOK. Founded in 1974, we currently employ 250 qualified employees at the headquarter in Svendborg, Denmark. SH Group is present in Sandnes, Norway, Houston, USA and in Singapore and Tianjin, China. SH Group A/S Kuopiovej Svendborg Denmark SH Group Marketing

SH GROUP FACILITIES. Kuopiovej Svendborg. Denmark

SH GROUP FACILITIES. Kuopiovej Svendborg. Denmark SH GROUP FACILITIES Kuopiovej 20. 5700 Svendborg. Denmark. +45 6221 7810. sh@shgroup.dk www.shgroup.dk SH GROUP A/S - HEADQUATERS DENMARK SH Group head office administration, service, sales and engineering