Test Report: Asbestos Analysis of Bulk Materials by PLM via the NY State ELAP Method

Size: px

Start display at page:

Download "Test Report: Asbestos Analysis of Bulk Materials by PLM via the NY State ELAP Method"

Dorothy Newton
6 years ago
Views:

1 Phone: (518) Received: 05/11/12 9:59 AM Analysis Date: Project: Test Report: Analysis of Bulk Materials by PLM via the NY State ELAP Method Non- Sample Description Appearance % Fibrous % % Type 1A B A BASEMENT STAIRWELL/ CEMENT BOARD BASEMENT STAIRWELL/ CEMENT BOARD ROOM 118 CEILING/ /White Fibrous /Tan 35.00% Non-fibrous (other) 29.00% Ca Carbonate 15.00% Ca Carbonate 65.00% Quartz 36.00% Chrysotile Positive Stop 2B ROOM 118 CEILING/ Brown/White 25.00% Ca Carbonate 55.00% Gypsum 3A ROOM 117 WALL/ /Tan 3.00% Hair 17.00% Ca Carbonate 55.00% Quartz 3B ROOM 117 WALL/ Tan/White/Green 30.00% Ca Carbonate 45.00% Gypsum 4A ROOM 120 WALL/ 45.00% Quartz 30.00% Ca Carbonate 4B ROOM 120 WALL/ White 45.00% Ca Carbonate 35.00% Gypsum Analyst(s) Emily Myint (7) Steve Jusczuk (16) James Hall, Laboratory Manager or other approved signatory EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Samples analyzed by EMSL Analytical, Inc. New York, NY NYS ELAP Initial report from 0 11:41:39 Test Report PLMPTC Printed: 12:36:04 PM 1

2 Phone: (518) Received: 05/11/12 9:59 AM Analysis Date: Project: Test Report: Analysis of Bulk Materials by PLM via the NY State ELAP Method Non- Sample Description Appearance % Fibrous % % Type 5A ROOM /Tan 30.00% Non-fibrous (other) WALL/ PLASTER 15.00% Ca Carbonate GRAY 55.00% Quartz 5B ROOM WALL/ PLASTER SKIM Tan/White 25.00% Gypsum 55.00% Ca Carbonate 6A ROOM 206 CEILING/ /Tan 20.00% Ca Carbonate 55.00% Quartz 6B ROOM 206 CEILING/ Tan/White 15.00% Gypsum 65.00% Ca Carbonate 7A ROOM 206 WALL/ /Tan 25.00% Ca Carbonate 55.00% Quartz 7B ROOM 206 WALL/ Tan/White 15.00% Non-fibrous (other) 35.00% Ca Carbonate 50.00% Gypsum 8A ROOM 205 WALL/ 35.00% Ca Carbonate 45.00% Quartz 8B ROOM 205 WALL/ White 45.00% Non-fibrous (other) 55.00% Ca Carbonate Analyst(s) Emily Myint (7) Steve Jusczuk (16) James Hall, Laboratory Manager or other approved signatory EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Samples analyzed by EMSL Analytical, Inc. New York, NY NYS ELAP Initial report from 0 11:41:39 Test Report PLMPTC Printed: 12:36:04 PM 2

3 Phone: (518) Received: 05/11/12 9:59 AM Analysis Date: Project: Test Report: Analysis of Bulk Materials by PLM via the NY State ELAP Method Non- Sample Description Appearance % Fibrous % % Type 9A /Tan 30.00% Non-fibrous (other) / BREACHING 25.00% Ca Carbonate 45.00% Quartz 9B / BREACHING /Tan 25.00% Ca Carbonate 50.00% Quartz 10A / BRICK MORTAR /Tan 15.00% Ca Carbonate 65.00% Quartz 10B / BRICK MORTAR 30.00% Non-fibrous (other) 40.00% Quartz 30.00% Ca Carbonate 11A STONE FOUNDATION ROOM 001/ MORTAR /Tan 15.00% Non-fibrous (other) 35.00% Ca Carbonate 50.00% Quartz 11B STONE FOUNDATION ROOM 009/ MORTAR 30.00% Non-fibrous (other) 40.00% Quartz 30.00% Ca Carbonate 12A B / WIRE INSULATION 009/ WIRE INSULATION Brown/ Fibrous Brown Fibrous 80.00% Cellulose 5.00% Non-fibrous (other) 15.00% Matrix 85.00% Cellulose 15.00% Non-fibrous (other) Analyst(s) Emily Myint (7) Steve Jusczuk (16) James Hall, Laboratory Manager or other approved signatory EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Samples analyzed by EMSL Analytical, Inc. New York, NY NYS ELAP Initial report from 0 11:41:39 THIS IS THE LAST PAGE OF THE REPORT. Test Report PLMPTC Printed: 12:36:04 PM 3

4 Phone: (518) Project: Received: Analysis Date: 05/12/ :24 AM Test Report: Analysis of Bulk Material Analyzed Non Sample Description Test Date Color Fibrous 13A ROOM 117 UNDER PLYWOOD FLOOR/ FLOOR TILE 4.4% Chrysotile 4.4% Total Positive Stop () Comments 13B Positive Stop () ROOM 117 UNDER PLYWOOD FLOOR/ FLOOR TILE Positive Stop () 14A Inconclusive: ROOM 117 UNDER PLYWOOD FLOOR/ FLOOR TILE MASTIC <1% Chrysotile <1%Total 14B Inconclusive: ROOM 117 UNDER PLYWOOD FLOOR/ FLOOR TILE MASTIC Positive Stop () 15A Inconclusive: ROOM 117 FLOOR/ FLOOR TILE MASTIC 1.8% Chrysotile 1.8%Total 15B Inconclusive: ROOM 117 FLOOR/ FLOOR TILE MASTIC Positive Stop () Report Amended 05/16/ :05:26 Replaces Report Amended 0 12:12:13. Reason Code: Data Entry-Test Added Test Report NY198w/A Printed: 5/16/2012 4:05:26 PM Page 1

5 Phone: (518) Project: Received: Analysis Date: 05/12/ :24 AM Test Report: Analysis of Bulk Material Analyzed Non Sample Description Test Date Color Fibrous 16A ROOM 203/204 WALL/ 9"X9" FLOOR TILE MASTIC Inconclusive: Comments 16B Inconclusive: ROOM 203/204 WALL/ 9"X9" FLOOR TILE MASTIC 17A Inconclusive: WINDOW/ GLAZING 4.5% Chrysotile 4.5%Total 17B <1% Fibrous (other) Inconclusive: WINDOW/ GLAZING Positive Stop () 18A <1% Chrysotile BASEMENT STAIRWELL/ FLOOR TILE Inconclusive - <1% Total Positive Stop () 18B % Chrysotile BASEMENT STAIRWELL/ FLOOR TILE 1.7% Total Positive Stop () Report Amended 05/16/ :05:26 Replaces Report Amended 0 12:12:13. Reason Code: Data Entry-Test Added Test Report NY198w/A Printed: 5/16/2012 4:05:26 PM Page 2

6 Phone: (518) Project: Received: Analysis Date: 05/12/ :24 AM Test Report: Analysis of Bulk Material Analyzed Non Sample Description Test Date Color Fibrous 19A BASEMENT STAIRWELL/ FLOOR TILE MASTIC Inconclusive: <1% Chrysotile <1%Total Comments 19B Inconclusive: BASEMENT STAIRWELL/ FLOOR TILE MASTIC 5/16/2012 <1% Chrysotile <1%Total 20A Inconclusive: ROOM 203/204 FLOOR/ 9"X9" FLOOR TILE 20B Inconclusive: ROOM 203/204 FLOOR/ 9"X9" FLOOR TILE 21A White 70.00% Glass 30% ROOM 001 LARGE PIPE/ LAG 21B Not Submitted Sample bag empty ROOM 001 LARGE PIPE/ LAG 21C White 65.00% Glass 35% ROOM 001 LARGE PIPE/ LAG Report Amended 05/16/ :05:26 Replaces Report Amended 0 12:12:13. Reason Code: Data Entry-Test Added Test Report NY198w/A Printed: 5/16/2012 4:05:26 PM Page 3

7 Phone: (518) Project: Received: Analysis Date: 05/12/ :24 AM Test Report: Analysis of Bulk Material Analyzed Non Sample Description Test Date Color Fibrous Comments Analyst(s) Albert Grohmann Gerald Iannuzzi Steve Jusczuk Venisha Lazarus-Barnes James Hall, Laboratory Manager or other approved signatory NOB = Non Friable Organically Bound = Not Applicable EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported above and may not be reproduced, except in full, without written approval by EMSL. The above test report relates only to the items tested. This test report must not be used to claim product endorsement by NVLAP or any agency of the U.S. Government. EMSL bears no responsibility for sample collection activities or analytical method limitations. The results in this report meet all requirements of the NELAC Standards unless otherwise noted. The laboratory is not responsible for the accuracy of results when requested to physically separate and analyze layered samples. PLM is not consistently reliable in detecting asbestos in floor coverings and similar NOB's. Quantitative TEM is currently the only method that can be used to determine if a NOB material can be considered or treated as non-asbestos containing. Samples analyzed by EMSL Analytical, Inc. New York, NY NYS ELAP Report Amended 05/16/ :05:26 Replaces Report Amended 0 12:12:13. Reason Code: Data Entry-Test Added Test Report NY198w/A Printed: 5/16/2012 4:05:26 PM THIS IS THE LAST PAGE OF THE REPORT. Page 4

HOL-11 Exterior Pipe wrap Lagging (fiber) PLM None detected. HOL-09 Room 10 - Floor Tile, Grey 12x12 PLM None detected

HOL-11 Exterior Pipe wrap Lagging (fiber) PLM None detected. HOL-09 Room 10 - Floor Tile, Grey 12x12 PLM None detected Laboratory results - Asbestos School Sample no. Sample Location Material Sample Type Result Holbrook Elementary HOL-01 Room 12 Floor - Linoleum Tan Linoleum PLM 30% Chrysotile Floor tile PLM None detected