Sq.m. ii) 1:4:8 (1 cement:4 coarse sand : 8 graded stone aggregate 40mm nominal size). Cu.m

Size: px

Start display at page:

Download "Sq.m. ii) 1:4:8 (1 cement:4 coarse sand : 8 graded stone aggregate 40mm nominal size). Cu.m"

Roderick Carr
5 years ago
Views:

1 Schedule of Quantities (NFL/NGL/C/434/2012) Name of Work: Construction of New Class Rooms, Toilet Blocks, Verandah and Boundary wall and renovation of existing Kitchen, toilet blocks at Village Mojowal, Chhoetwal, Dukli, Kathera and Barari, under Corporate Social Responsibility Plan (CSR) during S.No. Description of Items Unit Qty. Quoted Rate Amount 1 Earth work in excavation over areas (exceeding 30 cm in depth, 1.5m in width as Cu.m well as 10(sqm on plan) including disposal of excavated earth, lead upto 50m and upto all depth, disposed earth to be levelled and neatly dressed: All kinds of soil. 2 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in Cu.m width or 10 sqm. on plan) including dressing of sides and ramming of bottoms, and upto all depth including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, All kinds of soil. 3 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish lead upto 50m and lift upto 1.5m, all 100 Sq.m kinds of soil. 4 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: i) 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size). Cu.m ii) 1:4:8 (1 cement:4 coarse sand : 8 graded stone aggregate 40mm nominal size). Cu.m Brick work withbricks of class designation 75 in foundation and plinth in : cement Cu.m mortar 1:6 (1 cement: 6 fine sand ). 6 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1- Sq.m cement: 2-coarse sand: 4- graded stone aggregate 12.5mm nominal size). 7 Applying a coat of residual petrolem bitumen of penetration 80/100 of approved Sq.m quality using 1.7 Kg. Per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 1/13

2 8 Brick work with bricks of class designation 75 in superstructure above plinth level Cu.m upto floor five level in cement mortar 1:6 (1 cement : 6 fine sand ). 9 Half brick masonry with bricks of class designation 75 in super structure above Sq.m plinth level upto floor fine level. in cement mortar1:4 (1 cement:4 fine sand). 10 Providing and laying in position specified grade of reinforced cement concrete in raft, columns, beams, slabs, retaining walls, walls etc. excluding the cost of centring, shuttering, finishing and reinforcement, at all height / depth. i) 1:1.5:3 (1-cement: 1.5 coarse sand:3 grade stone aggregate 20mm nominal Cu.m size). 11 Centring and shuttering including strutting, propping etc. and removal of form at all height / depth for: i) Foundations, footings, bases of colums, RCC walls etc. for mass concrete. Sq.m ii) Suspended floors, roofs, landings, balconies and access platform. Sq.m iii) Columns, beams, lintel beams, pillars, piers, abutments, posts & struts. Sq.m Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete, at all height / depth (Steel reinforcement shall be supplied free of cost from NFL main stores). i) Mild steel / Tor Steel/ TMT Bar and medium tensile steel bars. Kg mm cement plaster of mix: 1:6 (1 cement:6 Fine sand), at all height / depth. Sq.m mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 Sq.m cement:6 Fine sand), at all height / depth. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 2/13

3 15 6mm Cement Plaster to ceiling of mix 1:3 (1-Cement : 3-fine sand), at all height / Sq.m depth. 16 Supplying and filling in plinth with River / Fine sand under floors including Cu.m watering, ramming consolidating and dressing complete. 17 Filling available excavated earth (excluding rock) in trenches, plinth, sides of Cu.m foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. 18 Cement concrete flooring 1:2:4: (1 cement :2 coarse snad:4 graded stone aggregate) Sq.m finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. 19 Flush pointing with cement mortar 1:3 (1 cement, 3 fine sand) fixed with 2% of Sq.m integral waterproofing compound by weight of cement for flat tile. bricks on top of mud phaska with F.P.S. brick tiles. 20 Providing and fixing glass strips in joints of terrazo/cement concrete floors 40 mm Metre wide and 4 mm thick. 21 Providing & fixing on wall face unplasticised rigid PVC rain water pipes Metre conforming to IS: Type A including with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (i) single socketed pipes, 110mm dia meter. 22 Providing & fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. a) Bend mm Bend No C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 3/13

4 23 Providing and fixing white vitreous china water closet squatting. pan (Indian type ) Each including dismantling old damaged w.c. pan.). Orisa Pattern W.C. pan of size 580 x 440 mm. 24 Providing and fixing P.V.C. low level flushing cistern with manually controlled Each device (handle lever) confomiing to IS:7231 Parryware/Seabird/Orient (Coral) with all fittings and fixtures complete; 10 Litre Capacity--White. 25 Providing and fixing sand cast iron P or S trap of self cleaning design including cost Each of cutting and making good at the walls and floors and taking out the old trap wherever necessary complete all as per instructions of the Engineer-in-charge. 26 Providing and Fixing of PVC floor trap as approved by Engr. In-charge. i) 100 X 75. Each Providing and fixing brass bib cock of approved quality: 15 mm. Each Providing and fixing uplasticised PVC connection pipe 15 mm nominal bore., 45 Each cm length. 29 Providing and fixing stainless steel jali (grating) withor without hole for waste pipe Each for floor/nahani trap: 150mm dia. 30 Providing and fixing white vitreous china wash basin including making all Each 5.00 connections but excluding the cost of fittings: Flat back wash basin size 550x400 mm of Cera, Hindware etc. 31 Providing and fixing C.P. brass bib cock of approved quality: 15mm nominal bore, Each 5.00 conforming to IS C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 4/13

5 32 Providing and fixing of heavy duty CP brass pillar tap 15mm NB of approved Each 5.00 design quality and make complete all as per specification to the Engineer-in-charge. 33 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of No approved quality conforming to IS:8931, 15mm nominal bore. 34 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of Each 5.00 approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with bard ground fixed to wooden cleats with Steel / C.P. brass screws and washers complete. 35 Providing and fixing 600x120x5 mm glass shelf with edges rounded of supported Each 5.00 on anodised aluminium angle framewith C.P. brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc. complete. 36 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including chasing / cutting and making good the walls etc. wherever required (Internal work). i) 15 mm nominal bore. Metre Providing and fixing G.I. pipes complete with G.I. Fittings including trenching and refilling etc. wherever required (external work). i) 15 mm nominal bore. Metre P/F first quality ceramic quality glazed tiles conforming to IS of min. Sq.m thickness 5 mm of approved make likenitco, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by Engr. In.Charge in skirting, risers,of steps and dados over 12 mm thick bed of Cement mortar1:3 (1 cement:3 coarse sand) and joining with grey cement 3.3 kg/m2 including pointing in white cement mixed with pigment of matching shade complete. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 5/13

6 39 Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. Waste, fittings complete; i) 32 mm dia. Each Demolishing brick work including stacking ofserviceable material and disposal of unservice ablematerial within 50 metres lead in cement. i) In Cement Mortar. Cu.m Demolishing cement concrete including disposal of material within 50 metres lead : Cu.m :3: 6 or richer mix. 42 Marble work ( Table rubbed and polished) for floors / walls/ plateforms / steps / Sq.m counters facias / partions and similar locations in 20 mm thick cement mortar 1 : 3 (1Cement :3 Coarse sand) including pointing with cement mortar 1 : 2 (1 Cement : 2 Marble Dust ) with and admixture of pigment to match the marble shade : 18 mm thick White Marble : Rajnagar plain. 43 Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI: marked indicating the BIS license no. with cover and suitable locking Per Ltr. arrangement and making necessary holes for inlet, outlet and overflow pipes but Capaci without fittings and the base support for tank of Sintex, make. ty 44 Providing and fixing soil, waste and vent pipes: i) Sand cast iron S & S pipe 100 mm. Metre Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 Each (1-cement: 2-fine sand) in S.C.I./ C.I. pipes, 100mm dia pipe. 46 Carriage of materials by Mechanical Transport inlcuding loading, unloading and stacking wherever required upto 1-KM lead, as specified by the Engineer-in-charge. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 6/13

7 i) Building Rubbish. Cu.m ii) Earth Cu.m Providing & Fixing C.P. Brass waste for wash basins etc., for Wash basins 32 mm Each 5.00 dia. 48 Providing wood work in frames of doors, windows, clerestory windows and other Cu.m frames wrought framed and fixed in positon, Sal wood. 49 Providing and fixing panelled or panelled and glazed shutters for doors, windows Sq.m and clerestory windows including black enamelled M.S. butt hinges with necessary screws including panelling with 12mm th. Marine ply with commercial veneering on both side. 35 mm thick deodar Wood (2nd class). 50 Providing and fixing glazed shutters for doors, windows, and clerestory windows Sq.m using 4mm thick glass panes including M.S. butt hinges with necessary screws: 30mm thick shutter: deodar Wood (2nd class). 51 Providing and fixing 30 mm thick wire gauge shutters using galvanised MS wire Sq.m gauge of average width of aperture 1.4mm with wire of dia 0.63 mm for doors, windows and clerestory windows including bright finished or/and black enamelled M.S. butt hinges with necessary screws. 2nd Class Deodar wood. 52 Providing and fixing fly proof galvanished M.S. wire gauge to doors. Windows etc. Sq.m (Wire gauge designation 85G with wire dia 0.56mm). With old / by providing new wooden beeding, wherever required. 53 Providing and fixing moulded wooden beeding deodar 2nd class wood to doors and Metre windows frames with iron screws plugs and priming coat on unexposed surfaces complete. 50 X 12 mm. Providing and fixing oxidised MS sliding door bolts with nuts and screws etc. complete 250x16 mm. Each C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 7/13

8 55 Providing and fixing M.S. handles conforming to IS:208 with necessaryscrews etc. Each complete. 100mm. 56 Providing and fixing MS tower bolte (Barrel type) with necessary screwsetc. complete: bright satin finished black stove enamelled. i) 150x10 mm. Each ii) 100x10 mm. Each Fixing chowkhats in exising opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfasts in cement concrete blocks with cement concrete 1:3:6(1 cement:3 coarse sand:6 graded stone aggr. 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors as required, including finishing walls with existing treatment of w/washing / distempering / cement painting complete with disposal of rubbish to the dumping ground with in 50 metres lead (Any where within NFL Complex). i) Door chokhats. Each ii) Window chowkhats. Each iii) Clerestory window chowkhats. Each Providing and fixing bright finished or/and black enamelled MS helicaldoor spring Each / coil spring with necessary nuts / bolts / nails / screws etc. 59 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 Each mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1cement:3 sand:6 gaded stone aggregate 20 mm nominal size). C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 8/13

9 60 Structural steel work welded / riveted/ bolted in built up sections, trusses and framed work including cutting hoisting fixing in position including cost of primary coat. (Structure steel to be issued free of cost at NFL Stores), for fencing post, car / scooter sheds, railway gates, doors and other civil relatated job. b) In tees, angles, flats, plates and channels etc. Qtl White washing / Colour washing with lime to give an even shade : a) New work (Three or more coats) Sq.m Note: By using painting brush only. 62 Distempering with oil bound / Acralic washable distemper of approved brand and manufacture to give an even shade. a) New work (Two or more coats with one coat of primer). Sq.m Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade. a) New work (Three or more coats). Sq.m Applying priming coat with ready mixed pink orgrey primer / red oxide steel primer Sq.m of approved brand and manufacture onwood work (hard and soft wood)/ steel work. 65 Painting with synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. a) New / old wood / steel work (two or more coats). Sq.m C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 9/13

10 66 Attending various types of jobs pertaining to Masonry and other allied jobs, Per involving skilled labour & helper during normal working hours. All material operati required for the job shall be supplied free of cost at NFL Stores. on 67 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with Kg M.s. flats, square of round bars etc. all complete, fixed to openings/ wooden frames with rawl plugs screws etc cm thick (av.) mud phaska of damped brick earth on roofs laid to slope Sq.m consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg per cu.m. of earth and gobri leaping with mix 1:1 (1-clay: 1-cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1- cement: 3-fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat, with F.R.P. brick tiles. 69 Painting top of roofs with bitumen of approved quality at 17Kg. per 10 sq.m. Sq.m impregnated with a coat of course sand at 60 cudm per 10 sq.m. including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete, with residual type petrolem bitumen of penetration 80/ Providing gola 75X75mm in cement concrete 1:2:4 (1-cement : 2-coarse sand: 4- R.Mtr stone aggregate 10mm and down gauge ) including finishing with cement mortar 1:3(1-cement: 3-fine sand) as per standard design in 75X75mm deep chase. 71 Making khurras 45X45cm with average minimum thickness of 5cm cement No concrete 1:2:4 (1-cement: 2-coarse sand: 4-graded stone aggregate 20mm nominal size) over P.V.C. sheet 1mX1mX400 microns, finished with 12mm cement plaster 1:3 (1-cement: 3-coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 10/13

11 72 Filling excavated earth in trenches, plinth, side slopes, foundation etc. in layers not Cu.m exceeding 20cm in depth consolidating each deposited layer by ramming and watering, all as per directions of the Engineer-in-charge after arranging good earth by necessary earth work in excavation at excavated site and transporting the same with use of Mechanical Transport to filling site. Good earth shall be arranged by the contractor at his own cost. 73 Dismantling of flushing cistern of any size incudng stacking of useful materials Each near the site and disposal of unserviceable materials within 50 metres lead. 74 Dismantling old plaster or skirting raking out joints and cleaning the surface for Sq.m plaster including disposal of rubbish to the dumping ground, as directed by Engineer-in-charge. 75 Dismentalling GI Pipes including excavation and refilling trenches after taking out Metre the pips including carriage of pipes in NFL stores : 15 to 40 mm nominal bore. 76 Providing and fixing white vitreous china flat back or wall corner type lipped front Each urinal basin of 430X260X350mm and 340X410X265m sizes respectively. 77 Providing and fixing / replacing uplasticised PVC connection pipe 15 mm nominal Each bore, 45 cm length. 78 Providing and fixing / replacing ball valve (brass) of approved quality complete: Each High or low pressure with plastic floats 15 mm nominal bore. 79 Making chases upto 7.5x7.5 cm in walls. Metre Providing and fixing GI fittings conforming to IS 1239 Part-II (ISI marked) in place of worn out GI fittings, when pipe line replacement is not involved. Note: Nothing extra shall be payable for dismantling existing worn out fittings wherever required. C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 11/13

12 I) GI BEND 90o a) 15mm dia. Each ii) GI ELBOW a) 15mm dia. Each iii) GI NIPPLES/ SOCKETS a) 15mm dia. Each iv) GI PLUGS a) 15mm dia. Each vi) G.I. Tee (Equal) a) 15mm dia. Each Providing and fixing PVC ball to ball valve in overhead storage tanks/ flush cistern Each of approved quality complete including removal of old/ damage ball 100mm dia. 82 Providing and Fixing bend for PVC low level flush cistern as approved by Engineerin-charge. i) Long bend. Each C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 12/13

13 83 Providing & fixing PVC automatic urinal flushing system of approved make. a) 10 Ltr. Capacity Each Dismantling doors, windows and clerestory windows (steel or wood) shutter Each including chowkhats,architrave holdfasts etc. complete including dismantling MS Grill from window/vent chowkhats of area 3 Sq.m.. and below and stacking the same at site.(double leaf shutter shall be treated as 1 unit only formeasurement). Quoted amount without Service Tax Details of Service Tax Calculation: a) The value of services (quoted amount) on which Service Tax shall be applicable ( %age of quoted amount) b) The amount of Service Tax (present prevailing rate 12.36%) c) The percentage ( %) liability of contractor as service provider d) The percentage ( %) liability of NFL as Service receiver (applicable only in specified cases of reverse charge) e) The amount of Service Tax added in quoted value (as per (c) above) Total: Add contractor s liability of Service Tax (As per calculation given below) Total Quoted amount including Service Tax (Signatur of Contractor with Rubber Stamp) (D.K. Talwar) Manager (Civil) C:\Users\admin\Documents\Civil Engg. Deptt -BSL\Contractor Record\ from 401 to onwards\434 Const. of New Class Room\Tender\SOQ (434) 13/13

BILL OF QUANTITY PART-III CIVIL WORKS ITEM NO. DESCRIPTION UNIT QTY RATE AMOUNT

Page 1 BILL OF QUANTITY PART-III CIVIL WORKS ITEM NO. DESCRIPTION UNIT QTY RATE AMOUNT 1 Providing and fixing door Closer/Bottle type Each 10 2 Providing and fixing door Stopper Each 10 Providing and placing