BOQ. Annexure-I. Name of work: Renovation work for Pantry in hostel Kameng, Umium, Barak & Dibang at IITG campus Item No.

Size: px

Start display at page:

Download "BOQ. Annexure-I. Name of work: Renovation work for Pantry in hostel Kameng, Umium, Barak & Dibang at IITG campus Item No."

Horace Goodman
6 years ago
Views:

1 Name of work: Renovation work for Pantry in hostel Kameng, Umium, Barak & Dibang at IITG campus Item No. Description of item Unit Quantity Rate (Rs.) Rate in words Amount(Rs.) Part-A: Civil works 1 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable Cum material within 50 metres lead as per direction of Engineer - incharge. 2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 5 Cum Sqm a) Of area 3 sq. metres and below Each Centering and shuttering including strutting, propping etc. & removal of form at all heights and levels. a) Shelves (Cast in situ) Sqm BOQ Annexure-I

2 6 7 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Kg Cum Cum Half brick masonry with bricks of class designation 75 in superstructure upto floor five level in cement mortar 1:4 (1 cement: 4 coarse sand ) 10 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Sqm kg

3 11 Providing and laying heavy duty vitrified antiskid matt finish tiles of minimum thickness 10 mm without warpage of approved design and manufacturer laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including filling the joints with joint filling compound of matching shade and approved manufacturer as per manufacturers specification etc. and cleaning the surface with detergent and water complete (size 300mm x 300mm) a) In Floors and landing Sqm Providing and fixing 1st class glazed ceramic tile of approved design of min. thickness 5.6mm in dado in any pattern and size over 12mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand) jointed with jointing compound of matching shade and approved Sqm manufacture complete as directed. 300mmx450mm 13 Providing and fixing 18mm thick mirror polish granite slab of approved colour etc. over 20mm cement mortar 1:3 (1 cement : 3 coarse sand) all complete. a) Over kitchen platform including cutting holes for sink etc. Sqm

4 14 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) : a) For fixed portion kg b) For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM kg rubber / neoprene gasket required (Fittings shall be paid for separately)

5 15 Providing fitting & fixing glazing in aluminium doors, windows, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per architectural drawings and the directions of Engineer-in-Charge. With float glass panes of 5.00 mm thickness a) With float glass panes of 5.00 mm thickness 16 12mm thick cement plaster on even surface of wall with cement mortar 1:4 ( 1 cement : 4 coarse sand). 17 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 Applying one coat of cement primer of approved brand and manufacture on interior wall surface. 19 Providing & applying distemper with 1st class acrylic washable distemper of approved brand manufacture to give an even shade (two or more coats) including removal of undulations and sand papering the same to received one priming coat followed by two or more coats of acrylic distemper complete in all respect. 20 Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works Sqm Sqm Sqm Sqm Sqm Sqm

6 21 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: two or more coats on wood work in all shades. a) Two or more coats on wood/ steel work in all shades 22 Providing and fixing cup board shutters 25mm thick, with Prelaminated flat pressed three layer particle board or graded wood particle boards IS:12823 marked exterior grade (Grade-I Type-II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide c 12mm thick with necessary screws and bright finished stainless steel butt hinges, complete as per direction of the Engineer-in-Charge. Sqm sqm Providing and fixing Prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick sqm 44.00

7 24 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality. Double strip (horizontal type). each Providing and fixing S&S ISI304 kitchen sink as per IS with C.I. brackets and S&S plug 40mm including cutting and Each 4.00 making good the walls etc. 610x510 mm bowl depth 200 mm 26 Providing and fixing CP brass adjustable sink cock (Cat. no. 357kn) with wall flange along all necessary fixing arangements etc - 15mm nominal bore.( Jaquar Continentel or equivalent) Each Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc., a) PN - 16 Pipe, 20 mm OD Rm 80.00

8 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. a) 25 mm dia nominal bore Rm Providing and fixing PVC waste pipe of standard pattern for wash basins, sinks etc. of approved make. a) 32 mm dia each 4.00 Providing and fixing circular type PTMT grating of approved quality. a) 100 mm Dia each 4.00 Providing and fixing of unplasticised-rigid PVC sewer pipes conforming to IS:13592 (6kg/sqcm) including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with all accessories as clamps, bend, door, horn bend,shoe, cowl etc. complete as directed : 110 mm dia metre Providing and fixing C.P. brass angle valve 15mm dia. for basin mixer and geyser points (Make:Model : CQT of Jaquar or equivalent) a) 15 mm nominal bore Each 4.00 Providing and fixing colour anodized aluminium sliding bolts anodized (anodic coating not less than grade AC-10 as per IS:1868) with nuts, screws etc. complete. a) 300 x 16mm Each 4.00 Providing and fixing aluminium tower bolt anodized to required colour or shade with necessary screws etc. complete. a) 250 x 10mm Each 12.00

9 35 Providing and fixing aluminium handles anodized to required colour or shade with necessary screws etc. complete. a) 125mmx12mm Each Total Amount of Part-A `= Discount, if any= al Amount of Part-A Rounded off ` = Part-B: Electrical works 1.0 POINT WIRING AND SUBMAIN WIRING 1.1 Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm. PVC insulated, FR, multistrand copper conductor cable in surface/ recessed medium class PVC conduit complete with Piano type switch, suitable MS box and earthing the point with 1.5 sq.mm, FR PVC insulated coper conductor single core cable etc., as required.. Point Wiring for submain with the following sizes of PVC insulated, FR copper conductor, single core cable in surface/recessed PVC conduit, as required. 1.3 a) 3 X 1.5 sq.mm M 40 b) 3 X 2.5 sq.mm M 50 c) 3 X 4 sq.mm M 100 e) 3 X 10 sq.mm M 40 Supplying & fixing of following switchs in existing box a) 6A piano type switch NO 8 b) 16A Piano switch NO 12 c)3 pin 5/6 socket outlet NO 8 d) 3 pin 15/16 socket outlet NO 12

10 Supplying, fixing of following M.S. boxes complete with phenolic laminated sheet cover, including painting etc. complete. a) 100mm X 100mm X 60mm NO 8 b) 180mm X 150mm X 60mm NO 12 c) 200mm X 250mm X 60mm NO 4 DISTRUBTION BOARDS / MV PANEL Supplying and fixing of 5amps to 32 amps rating 240/415V, 'L' or 'C' series as directed, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required a) Single Pole (5-32amp) NO 16 Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as NO 4 required. Supplying and fixing of following rating, double pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 amps NO 2

11 2.4 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a). 2+8 way/10way, Double Door Each LIGHTING FIXTURE & FANS 3.1 Installation, testing and commissioning of celing fan, including wiring the down rod of standing length (upto 30cm) with 1.5 sq.mm PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on the fan box etc., as required. NO Installation, of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep each 4 Total Amount of Part-B `= Discount, if any= Grand Total (A+B) `=

NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPLLI ESTATE MAINTENANCE DEPARTMANT NAME OF THE CONTRACTOR / FIRM :

NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPLLI- 620015 ESTATE MAINTENANCE DEPARTMANT SCHDULE OF WORK Name of Work :Renovation of Geotechnical Lab and Environmental lab in Civil Engineering Departemnt