OFA20-35 OFA20-35S OFA30-35 OFA30-35S
|
|
|
- Rosalyn King
- 6 years ago
- Views:
Transcription
1 Pinze pneumatiche mono-dito angolari per staffaggio, serie OF Azionamento a semplice effetto. Sensori magnetici opzionali. Grasso alimentare FDA-H1. One finger angular pneumatic grippers for clamping, series OF Single acting. Optional magnetic sensors. Food grade grease FDA-H1. OFA...-35S Fluido Medium OFA14-35 OFA20-35 OFA20-35S OFA30-35 OFA30-35S OFA50-35 OFA50-35S Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air OFA Corpo pinza Gripper body Alluminio Aluminium Pressione di esercizio Pressure range bar Temperatura di esercizio Temperature range 5 60 C. Corsa Stroke 35 Alesaggio Piston bore Ø10 mm Ø16 mm Ø25 mm Ø40 mm Coppia di chiusur a 6 bar Closing torque at 6 bar 26 Ncm 100 Ncm 430 Ncm 1900 Ncm Consumo d aria per ciclo Cycle air consumption 0.4 cm cm cm 3 43 cm 3 Peso Weight 25 g 65 g 86 g 206 g 272 g 860 g 1060 g OFS...-90S Fluido Medium OFS14-90 OFS20-90 OFS20-90S OFS30-90 OFS30-90S Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air OFS Corpo pinza Gripper body Alluminio Aluminium Pressione di esercizio Pressure range bar Temperatura di esercizio Temperature range 5 60 C. Corsa Stroke 95 Alesaggio Piston bore Ø10 mm Ø16 mm Ø25 mm Coppia di chiusur a 6 bar Closing torque at 6 bar 19 Ncm 70 Ncm 300 Ncm Consumo d aria per ciclo Cycle air consumption 1 cm cm cm 3 Peso Weight 23 g 60 g 80 g 185 g 245 g 228 Pinze per staffaggio / Grippers for clamping
2 Pinze pneumatiche mono-dito angolari per staffaggio, serie OF Azionamento a semplice effetto. Sensori magnetici opzionali. Grasso alimentare FDA-H1. One finger angular pneumatic grippers for clamping, series OF Single acting. Optional magnetic sensors. Food grade grease FDA-H1. Fluido Medium OFR14-95 OFR20-95 OFR20-95S OFR30-95 OFR30-95S OFR50-95 OFR50-95S Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air OFR...-95S OFR Corpo pinza Gripper body Alluminio Aluminium Pressione di esercizio Pressure range bar Temperatura di esercizio Temperature range 5 60 C. Corsa Stroke 95 Alesaggio Piston bore Ø10 mm Ø16 mm Ø25 mm Ø40 mm Coppia di chiusur a 6 bar Closing torque at 6 bar 19 Ncm 70 Ncm 300 Ncm 1250 Ncm Consumo d aria per ciclo Cycle air consumption 1 cm cm cm 3 80 cm 3 Peso Weight 25 g 60 g 81 g 193 g 257 g 790 g 990 g Fluido Medium OFR14-95G OFR20-95G OFR20-95SG OFR30-95G OFR30-95SG Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air OFR...-95SG OFR...-95G Corpo pinza Gripper body Pressione di esercizio Pressure range Alluminio Aluminium bar HNR Temperatura di esercizio Temperature range 5 60 C. Corsa Stroke 95 Alesaggio Piston bore Ø10 mm Ø16 mm Ø25 mm Coppia di chiusur a 6 bar Closing torque at 6 bar 19 Ncm 70 Ncm 300 Ncm Consumo d aria per ciclo Cycle air consumption 1 cm cm cm 3 Peso Weight 30 g 80 g 100 g 230 g 300 g Pinze per staffaggio / Grippers for clamping 229
3 Guida pinza Gripper guide (kit completo di viti) (kit with screws) C D MFI-A96 MFI-A97 E F A A [mm] Ø20 Ø30 [mm] C [mm] D [mm] E [mm] F [mm] Peso / Weight 20 g 60 g Riscontro per pinze OFS Stopper for OFS grippers (kit completo di viti) (kit with screws) F C E A MFI-A271 MFI-A98 MFI-A99 A [mm] Ø14 Ø20 Ø30 [mm] C [mm] D [mm] E [mm] F [mm] Peso / Weight 5 g 14 g 23 g D Riscontro per pinze OFR Stopper for OFR grippers (kit completo di viti) (kit with screws) MFI-A96 MFI-A96 OF20G MFI-A98 OFR20-95 OFS20-90 OFR20-95 OFA20-35 G H D E A OF14G OF20G OF30G A [mm] Ø14 Ø20 Ø30 [mm] C [mm] D [mm] E [mm] F [mm] G [mm] H [mm] Peso / Weight 6 g 12 g 30 g F C Esempi di utilizzo / Application examples 230 Pinze per staffaggio / Grippers for clamping
4 Sensori magnetici opzionali Il rilevamento della posizione di lavoro è affidato a uno o più sensori magnetici di prossimità (opzionali), che rilevano la posizione attraverso il magnete sul pistone. Quindi, per un corretto funzionamento, è da evitare l impiego in presenza di forti campi magnetici od in prossimità di grosse masse di materiale ferromagnetico. Optional magnetic sensors The operating position is detected by magnetic proximity sensors (optional) through a magnet placed on the piston. The use of magnetic proximity sensors is to be avoided in the vicinity of large masses of ferromagnetic material or intense magnetic fields as this may cause detection problems. I sensori utilizzabili sono: The sensors that can be used are: SN4N225-G PNP cavo 2.5m / 2.5m cable SN4M225-G NPN cavo 2.5m / 2.5m cable SN3N203-G PNP Connettore M8 / Snap M8 plug connector SN3M203-G NPN Connettore M8 / Snap M8 plug connector SS4N225-G PNP cavo 2.5m / 2.5m cable SS4M225-G NPN cavo 2.5m / 2.5m cable SS3N203-G PNP Connettore M8 / Snap M8 plug connector SS3M203-G NPN Connettore M8 / Snap M8 plug connector PNP Magneto-resistive NPN OUT OUT Sono tutti dotati di un cavo piatto a tre fili e di un led. They are all provided with a 3-wire flat cable and a LED. SN... SS... OF......S SWP-... OF... OF14... OF20... OF30... SWP-... SWP-014 SWP-020 SWP-030 SN SS Nelle versioni S i sensori sono annegati nelle apposite cave. Nelle altre versioni è necessaria una fascetta esterna (SWP-...). In the S versions, the sensors are embedded in their slots. In the other versions, an external bracket (SWP-...) is required. Pinze per staffaggio / Grippers for clamping 231
5 OFA... OFA14-35 OFA20-35 OFA30-35 OFA50-35 A C D E F G H J K Ø14 Ø20 Ø30 Ø50 L M M12x1 M17x1 M27x1 M45x1.5 N P R S T M5 M5 M5 G1/8 CH Pinze per staffaggio / Grippers for clamping
6 OFA...S Sede per sensori Sensor groove OFA20-35S OFA30-35S OFA50-35S A C D E F G H J K Ø20 Ø30 Ø50 L M M17x1 M27x1 M45x1.5 N P R S T M5 M5 G1/8 CH Pinze per staffaggio / Grippers for clamping 233
7 OFR... A C D E F G J K L M N P R CH T OFR Ø14 14 M12x M5 OFR Ø20 20 M17x M5 OFR Ø30 30 M27x M5 OFR Ø50 50 M45x G1/8 234 Pinze per staffaggio / Grippers for clamping
8 OFR...S A C D E F G J K L M N P R T CH OFR20-95S Ø20 20 M17x M5 17 OFR30-95S Ø30 30 M27x M5 27 OFR50-95S Ø50 50 M45x G1/8 46 Sede per sensori Sensor groove Sede per sensori Sensor groove Pinze per staffaggio / Grippers for clamping 235
9 OFS... A C D E F G J K L M N P CH OFS Ø M M12x OFS Ø20 8 M M17x OFS Ø30 11 M M27x Pinze per staffaggio / Grippers for clamping
10 OFS...S A C D E F G J K L M N P OFS20-90S Ø20 8 M M17x1 6 5 OFS30-90S Ø30 11 M M27x Sede per sensori Sensor groove Sede per sensori Sensor groove Pinze per staffaggio / Grippers for clamping 237
11 OFR...-95G A C D E F G H I L M N O P Q R S T OFR14-95G Ø M12x OFR20-95G Ø M17x OFR30-95G Ø M27x Q S C O L N R Q 90 E O F P G N L Q M T H D I A M5 238 Pinze per staffaggio / Grippers for clamping
12 OFR...-95SG A C D E F G H I L M N O P Q R S T U OFR20-95SG Ø M17x OFR30-95SG Ø M27x Q S O 90 O N N P T U R Sede per sensori Sensor groove Q L F G L Q M T H D E C I Pinze per staffaggio / Grippers for clamping 239 A M5
OFA50-35 OFA50-35S Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air OFA20-35 OFA20-35S
Pinze pneumatiche mono-dito angolari per staffaggio, serie OF Azionamento a semplice effetto. Sensori magnetici opzionali. One finger angular pneumatic grippers for clamping, series OF Single acting. Optional
CILINDRI ISO INOX CYLINDERS ISO STAINLESS STEEL
I Cilindri della serie CX sono stati realizzati rispettando la normativa DIN/ISO 15552. Tali cilindri sono particolarmente adatti in ambienti aggressivi, nell'industria navale, farmaceutica, alimentare.
valvole ISO 5599/1 taglia 1
Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale bistabile sull elettropilota Detented manual override
CILINDRI ISO SERIE CW CYLINDERS ISO CW SERIES
CILINDI ISO 15552- SEIE CW CYLINDES ISO 15552- CW SEIES I cilindri Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 160 e 250 mm. Doppio effetto, ammortizzati e
sensori per cilindri magnetic sensors for cylinders Schema di collegamento: 2 fili Wiring diagram: 2 wires RS2-A RS1-A RS3-A RS4-A RS5-C Modello Model
Schema di collegamento: fili Wiring diagram: wires Modello Model RS1-A RS-A RS5-C RS-A RS4-A Funzione Function Reed NC Reed NC 6 Numero fili Number of wires Lunghezza fili Length of wires Connettore Connector
COMPACT CYLINDERS ISO 21287
AI WOK CILINDI COMPATTI ISO 2287 COMPACT CYLINDES ISO 2287 I CILINDI COMPATTI AIWOK sono, grazie alla loro compattezza, particolarmente adatti per impieghi in piccoli spazi. Questi cilindri grazie al loro
CILINDRI ISO SERIE CZ CYLINDERS ISO CZ SERIES
CILINDI ISO 15552- SEIE CZ CYLINDES ISO 15552- CZ SEIES I cilindri serie CZ di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati
CILINDRI ISO 6432 CYLINDERS ISO 6432
CILINDI ISO 6432 CYLINDES ISO 6432 I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante
INTERRUTTORI DI PROSSIMITA INDUTTIVI NON AMPLIFICATI NAMUR INDUCTIVE PROXIMITY NAMUR SWITCHES
INTERRUTTORI DI PROSSIMITA INDUTTIVI NON AMPLIFICATI NAMUR SERIE SERIES A01 INDUCTIVE PROXIMITY NAMUR SWITCHES INTERRUTTORI DI PROSSIMITA INDUTTIVI NAMUR CONFORMI ALLE NORME DIN 19234 E CENELEC EN50014-EN50020
DIRECT ACTING SOLENOID VALVES ÉLECTROVANNES A COMMANDE DIRECTE ELETTROVALVOLE AD AZIONAMENTO DIRETTO
VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility
Apertura verso l'alto per vetri lineari Sistema 061 Lift up opening for linear glasses System 061. n e m. srls /01
Apertura verso l'alto per vetri lineari Sistema 061 Lift up opening for linear glasses System 061 n e m N 0 E A R srls 06.2018 061/01 150 n e m N 0 E A R srls Sistema 061 System 061 95 Vedi pagina 210/01
INTERRUTTORI DI PROSSIMITA INDUTTIVI PARALLELEPIPEDI INDUCTIVE PROXIMITY SWITCHES BLOCK TYPE
INTERRUTTORI DI PROSSIMITA INDUTTIVI PARALLELEPIPEDI SERIESBQ10... INDUCTIVE PROXIMITY SWITCHES BLOCK TYPE INTERRUTTORI DI PROSSIMITA INDUTTIVI PARALLELEPIPEDI INDUCTIVE PROXIMITY SWITCHES BLOCK TYPE BQ10
B13 INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CONTENITORE LISCIO SERIE SERIES INDUCTIVE PROXIMITY SWITCHES WITH SMOOTH HOUSING B13
INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CONTENITORE LISCIO SERIE SERIES B13 INDUCTIVE PROXIMITY SWITCHES WITH SMOOTH HOUSING INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CONTENITORE LISCIO INDUCTIVE PROXIMITY
INTERRUTTORI DI PROSSIMITA INDUTTIVI PARALLELEPIPEDI CORRENTE CONTINUA O ALTERNATA
INTERRUTTORI DI PROSSIMITA INDUTTIVI PARALLELEPIPEDI CORRENTE CONTINUA O ALTERNATA SERIE SERIES BCF INDUCTIVE PROXIMITY SWITCHES BLOCK TYPE DIRECT OR ALTERNATE CURRENT INTERRUTTORI DI PROSSIMITA INDUTTIVI
SOLUZIONI A DUE E TRE ANTE / Three-doors and two-doors solutions
EVOLUTION EVOLUTION Evolution SOLUZIONI A DUE E TRE ANTE / Three-doors and two-doors solutions SISTEMA SCORREVOLE REGOLABILE PER ANTE SOVRAPPOSTE Portata, fino ad 80 kg per anta. Carrello inferiore con
VSM/55600/N2, Hollow piston rod cylinder Magnetic piston, double acting
VSM/55600/N, Hollow piston rod cylinder > > Ø 5 and 0 mmm > > Ideally suited for vacuum selected liquid transfer applications through the piston rod > > Non-rotating and telescopic piston rod provides
RA/28000;.../M, RA/28300;.../M Pneumatic cylinder, ISO Non-magnetic & magnetic piston, single acting Ø mm
/8000;.../M, /800;.../M Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, single acting... 00 mm High performance, stability and reliability Cylinders and mountings conform to ISO 555 (ISO 6,
INDIRECT ACTING SOLENOID VALVES ÉLECTROVANNES A COMMANDE INDIRECTE ELETTROVALVOLE AD AZIONAMENTO INDIRETTO
VQ indirect electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility
AAN BAN INTERRUTTORI DI PROSSIMITA INDUTTIVI AD ANELLO SERIE SERIES INDUCTIVE PROXIMITY SWITCHES RING TYPE AAN BAN
INTERRUTTORI DI PROSSIMITA INDUTTIVI AD ANELLO SERIE SERIES AAN INDUCTIVE PROXIMITY SWITCHES RING TYPE INTERRUTTORI DI PROSSIMITA INDUTTIVI AD ANELLO CON VITE POTEZIOMETRICA INDUCTIVE PROXIMITY SWITCHES
Presa campione asettica AS1 manuale Manual Aseptic sampling valve AS1
Possibilità nella presa campione asettica con attacco vapore di sterilizzazione a valvola chiusa When the valve is closed, possibility to sterilize in the aseptic sampling valve with steam Elemento Element
OMAL BALL VALVES CONSTRUCTION DETAILS
OMAL BALL VALVES CONSTRUCTION DETAILS 7 TA LUFTFUGITIVE EMISSION VSEALS ANTISTATIC DEVICE ATEX DOUBLE ANTIFRICTION WA FIRE SAFE sion built in compliance with recent, very strict standards and provided
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
CODICE - CODE CODICE - CODE CODICE - CODE
KIT PER ASSEMBLAGGIO MOUNTING KITS KIT PER ASSEMBLAGGIO ATTUATORI PNEUMATICI ED ELETTRICI SU VALVOLE MOUNTING KITS FOR PNEUMATIC AND ELECTRIC ACTUATORS ASSEMBLY ON VALVES - RI3001 27,00 RI3002 30,00 RI3003
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
Universal Gripper UG 20, UG 25
Universal Gripper UG 20, UG 25 - Declaration of Incorporation - Module Information - Montage Instructions - Maintenance Instructions Translation of the Original Montage Instructions copyright by Afag Automation
Chiusura pneumatica DL63 - Brevettata Pneumatic clamp DL63 - Patented
Chiusura pneumatica DL63 - Brevettata Pneumatic clamp DL63 - Patented Caratteristiche principali: - Fianchetti in acciaio - Dispositivo a ginocchiera - Perno di controllo della posizione finale - Tassello
Short Stroke Cylinders ISO Bores from 12 to 100 mm
Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic
Moduli LED LED modules
Moduli LED LED modules INDICE Index MODULI LED BASSA TENSIONE ALIMENTABILI IN CORRENTE COSTANTE Low voltage LED modules for constant current mode 4 4 MODULI LED A TENSIONE DI RETE Mains voltage LED modules
Product Information. Pallet change system NSR-A 100
Product Information NSR-A 100 NSR-A Compact. Loadable. Precise. NSR-A Pneumatic pallet change system with patented locking system Field of application For automatic changing of tools such as pallets in
(1) (1) (2) (2) Elevata protezione High protection series CARATTERISTICHE FEATURES
Interruttori di prossimità induttivi CON ELEVATA PROTEZIONE La serie di sensori con elevata protezione è particolarmente indicata in applicazioni ove siano presenti elevati disturbi in linea provenienti
DIGITAL TORQUE BENCH
Data Sheet: BTR2.543.R1.ENG www.aep.it DIGITAL TORQUE BENCH BTR2 is a torque bench for static measurements composed of a digital indicator and a strain gauge torque extremely rugged and compact with a
M/44000/M LINTRA rodless cylinders Double acting, magnetic piston
M/000/M LINTR rodless cylinders > > Ø 5... 0 mm > > Compact, spacesaving design > > Proven sealing system > > djustable cushioning > > Magentic piston as standard Technical features Medium: Compressed
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
CERTIFICAZIONI CERTIFICATION LEDLAB LIGHT IDEAS
Diamont Apparecchi da parete. Realizzati in alluminio pressofuso ad alta resistenza all'ossidazione. Diffusore in policarbonato antiurto ad alta resistenza ai raggi UV. L'apertura a cerniera permette una
HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting
G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational
Palladiano 1.1 Suspended / Sospensioni
Made in Italy Palladiano. Suspended / Sospensioni rev. // 3D3 IP66 Kg, IK Ø 6 37 Ø3 max Palladiano. Dimming with Casambi available on request Su richiesta dimmerazione disponibile mediante Casambi DESCRIPTION
Deep Pot. Applications: O Fixing jigs O Sensor and switch devices O High temperature gripping. Dimensions in mm. Part No.
Deep Pot O Material: cast Alnico 5, brass ring, mild steel pot O Supplied with Zinc plated keeper on poles O Red painted and ground on poles O With threated hole O Working Temperature up to 450 O Fixing
VERO-S Robot Coupling for Pallet Handling NSR maxi 200 / PKL maxi 200
Translation of the original manual VERO-S Robot Coupling for Pallet Handling NSR maxi 200 / PKL maxi 200 Assembly and Operating Manual Superior Clamping and Gripping Imprint Copyright: Imprint This manual
HOLE SAMPLING & MONITORING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
HOLE SAMPLING & MONITORING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com HOLE SAMPLING & MONITORING TABLE OF CONTENTS HOLE SAMPLING & MONITORING OVERVIEW...2 SPLIT
2-finger angular gripper SGB 32-50
www.comoso.com Translation of the original manual 2-finger angular gripper SGB 32-50 Assembly and Operating Manual Superior Clamping and Gripping Imprint www.comoso.com Imprint Copyright: This manual remains
GLASS TUBE MANOMETERS / SERIES M
MANOMETRI A TUBI DI VETRO / SERIE M801 808 GLASS TUBE MANOMETERS / SERIES M801 808 MANOMETRI A TUBO DI VETRO SERIE M801 808 Questi strumenti servono per misurare tutte e variabii che sono egate aa pressione
BOD 21M Distance Sensors. Effortless performance High efficiency
BOD 21M Distance Sensors Effortless performance High efficiency Linear Position Sensing Comprehensive systems expertise. Technological variety. Optimal solutions. Displacement sensing exactly what you
3-Jaw insertion gripper UFG 66
Translation of the original manual 3-Jaw insertion gripper UFG 66 Assembly- and Operating manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property of
ISO Cylinders Ø CLEAN PROFILE
KL ISO Cylinders Ø CLEAN PROFILE KL ISO Cylinders Ø CLEAN PROFILE Easier to clean QUICK INSTALLATION Sensors and connections on one side UNIVER TECHNOLOGY Strong and reliable ISO STANDARD Interchangeability
ALPHAIR PNEUMATIC ACTUATORS
September 201 ALPHAIR PNEUMATIC ACTUATORS 90 - I Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The
09. MACHINE ACCESSORIES. 202 Moulding Supplies Edition 9 // MOULD SCREENS 09.2 MOULD ALIGN 09.
09. MACHINE ACCESSORIES 203 203 204 09.1 MOULD SCREENS 09.2 MOULD ALIGN 09.3 EJECTOR COUPLING 208 209 211 09.4 MACHINE MOUNTS 09.5 LINEAR TRANSDUCER 09.6 HYDRAULIC COUPLERS 202 Moulding Supplies Edition
HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting
FH G G S F J H2 LB2 N/ S/F Specifications Thin parallel hand (bush/bearing guide) Double acting Series Operational stroke length: HLA,, 25mm 13,, 23mm Descriptions HLA Size Cylinder bore size mm CS CS
Welding accessories and safety catalogue
trafimetdistribution.com IT EN Welding accessories and safety catalogue PPE 2016 2017 IT Trafimet è un marchio italiano presente nel mercato industriale da quasi 40 anni che opera nello sviluppo e commercializzazione
Tavoli refrigerati Gastronorm/Euronorm a monoblocco ventilati
Tavoli refrigerati Gastronorm/Euronorm a monoblocco ventilati Ventilated monobloc refrigerated counters GN/EN - I compressori utilizzano gas R290 (GWP pari a 3) che comporta un notevole risparmio di energia;
SERVICE PARTS LIST. 7/8" (22mm) SDS ROTARY HAMMER. ABH-22 A002A See page 5 BULLETIN NO. A CATALOG NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 7/8" (22mm) SDS ROTARY HAMMER CATALOG
SENSORI DI ALLARME E CONTROLLO
SENSORI DI ALLARME E CONTROLLO ELT_TNM_00_00 SENSORI PER SISTEMA ANTISBANDAMENTO BELT ALIGNMENT SYSTEM SENSORS 151mm 1 /3 L + 95 mm LED 26 mm 54mm X M30 1,5 2 /4 L - Sensore capacitivo KI5065 KI5065 capacitive
DESCRIPTION UOM KEI# OEM#
ADAPTOR SCREW EA. AS-1070 755A010 AIR HOSE, NYLON AMERICAN STYLE, 20" EA. AS-3563 ---------- AIR HOSE, NYLON EUROPEAN STYLE, 20" EA. AS-3564 AIR HOSE, STAINLESS STEAL AMERICAN STYLE, 20" EA. AS-3565 ----------
16CS. Double acting Compressed air to 60 M LED (ON lighting) 980m/s 2
FH1 G B FH F J H2 LB2 N/ S/F Specifications Descriptions Size Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Open
FlexGripper Family. Grippers for palletizing Clamp, Claw, Vacuum
FlexGripper Family Grippers for palletizing Clamp, Claw, Vacuum Complete range of 3 palletizing grippers Optimized for ABB Palletizing Robots Claw for IRB 460/IRB 660 Vacuum for IRB 460/IRB 660 Clamp for
Z-Axis Compliance Device
Device ZN-50 ZN-0 ZN-100 ZN-125 ZN-160 ZN-200 ZN-250 ZN-300 Version 2.0 Last revision November 2012 Dear customer, Thank you for the confidence that you have placed in our company by purchasing an IPR
Linear actuators DFPI-ND2P-E-NB3P
-V- New Linear actuators DFPI-ND2P-E-NB3P Key features, product range overview Function DFPI-ND2P E NB3P are standardsbased linear actuators to ISO 15552 with integrated displacement encoder. The potentiometric
«АВТОП» Two-Stage RH1 Ejectors TSBL. Plate Control. 2-stage Ejector Bottom Last
TSBL Stationary platen side Support plate Clamping plate Moving platen side Basic center rod dia Center rod length - 32 - Телефон: (8482) 61-17-93; факс: (8482) 36-65-32 www.dme.net Stroke 1 (H1) Stroke
Dimensioni Dimensions. L 1000 mm 50 x 50 x 5 mm. L 1500 mm 50 x 50 x 5 mm. L 2000 mm 50 x 50 x 5 mm. L 2500 mm 50 x 50 x 5 mm
Dispersori di terra a croce e morsetti Ground rods cross profile and clamps 313.10 L 1000 mm 50 x 50 x 5 mm 313.15 L 1500 mm 50 x 50 x 5 mm 313.0 313.5 L 000 mm 50 x 50 x 5 mm L 500 mm 50 x 50 x 5 mm Dispersore
Modular pallet conveyor system XT
Modular pallet conveyor system Contents Introduction...331 The modular concept...332 System overview...333 Definition of parameters...335 General information...336 Technical information...338 Compact conveyor
PARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X
PARTS MANUAL LKO-00D ORANGE PEEL GRAPPLES V5 X TABLE OF CONTENTS LKO-00D ORANGE PEEL GRAPPLE Information Identification Number ---------------------------------------- Nomenclature ---------------------------------------------------
Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (2)
03-2016 D-GB Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (2) 11.10.2017 Table of contents MS 150 TC 4 Cylinder with piston, Ignition system 6 Motor housing 9 Oil pump, Clutch 11 Chain sprocket
TUBO SILICONE BLU PASSAGGIO ACQUA CON INSERTO TESSILE (L = 1 m) BLUE SILICONE WATER HOSE WITH TEXTILE REINFORCEMENT (L = 1 m) Minimum q.
CINGHIE RICAMBI PER IN AUTOCARRI GOMMA-METALLO ED AUTOBUS / METAL-RUBBER / BELTS FOR TRUCKS SPARE AND PARTS BUSES CINGHIE TUBI DI TRASMISSIONE IN SILICONE / BELTS SILICONE HOSES adattabili a / suitable
VERO-S Robot Coupling for Pallet Handling NSR mini 100 / PKL mini 100
Translation of Original Operating Manual VERO-S Robot Coupling for Pallet Handling NSR mini 100 / PKL mini 100 Assembly and Operating Manual Superior Clamping and Gripping Imprint Copyright: Imprint This
TP EA. Product Description. Properties and Benefits. Applications. Reaction Resin Mortar Based on Epoxy Acrylate. Approvals / Certificates:
Approvals / Certificates: Product Description The TP EA is a 2-component reaction resin mortar based on an epoxy acrylate. This product may be used in combination of a hand-, battery- or pneumatic tool
FILTERS. COMPO CARE - Pressure filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES
ILTERS HYDRAULI DIVISIO - Pressure filters TEHIAL DATA ORDERIG AD OPTIOS RT LOGGIG IDIATORS PRESSURE DROP ( p) URVES PRESSURE DROP ( p) URVES - MEDIA H+ ROSS UTIOAL VIE SPARE PARTS ORDERIG IORMATIO DIMESIOS
Pompe peristaltiche dosatrici Metering hose pumps
Serie/Series AS Pompe peristaltiche dosatrici Metering hose pumps Portata fino a.00 L/H Capacity up to.00 L/H Prevalenza fino a bar Discharge pressure up to bar Resistente ad acidi ed abrasivi Autoadescante
Bore size (mm): 20, 25, 32, 40, 50, 63, 80, 100
JIS Standard ompact ydraulic ylinder ompact ydraulic ylinder Series KD/KG Series KD Series KG Nominal pressure: MPa ore size :,,,,,,, 0 Q K N M S 2 Nominal pressure: 1 MPa ore size :,,,,,,, 0 ourtesy of
Alimentatori LED LED drivers
Alimentatori LED LED drivers ALimentatori LED LED drivers Alimentatori disponibili in diverse potenze e dimensioni con caratteristiche tecniche specifiche per settore di utilizzo Alimentatori per applicazioni
STEAM GENERATOR GV ETNA V/50HZ LAVOR PRO
STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO Content filters: validity This page is intentionally left blank. 8.451.0101 - STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO...4 R52110068-1 -
PNEUMATIC RACK & PINION ACTUATORS
PNEUMATIC RACK & PINION ACTUATORS 90-120 - 180 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design,
2-Stage Ejectors Positive, precision control of two-stage ejection
Positive, precision control of two-stage ejection 2-Stage Ejectors Positive, precise plate control Travel sleeve TSTL 2-stage Ejector Top Last DME 2-stage Ejectors (TS) adapt to a number of mold base sizes
PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS
PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS Page i 1. TOP & SIDE FRAME ASSEMBLIES, 6001.... PAGE 2 2. TOP & SIDE FRAME ASSEMBLIES, 6000.... PAGE 6 3. SIDE FRAME & HYDRAULIC
Alimentatori - Distributori per polveri Feeders - Hoppers distributors for powder
Alimentatori - Distributori per polveri Feeders - Hoppers distributors for powder Informazioni Informations Campi di Applicazione Sistemi di caricamento estrusori per cariche additive, caricamento di
Supply Voltage 10-30V DC V AC V DC/ VAC 10-30V DC VAC V DC/ VAC. (Pico-style) V DC/ (Micro-style) 10-30V DC
Convergent Mode(Sensing =6,Infrared Light) Connection Supply Voltage Output Mode Part Number m or 9m Cable MPC6DCX9C4U (m) MPC6DCX9C4U9 (9m) MPC6DCX9C4UHS (m) MPC6DCX9C4U9HS (9m) (4ms on/off) (wire) MPC6ACX9CU
Temperature sensors for automotive applications
Temperature sensors for automotive applications When the precise measurement of temperature is a critical aspect to the safety of a process, the importance of precision quality thermocouple material is
Students will know Vocabulary: career college personal skills technical school ASE certification
Consumer Mechanics/Intro to Auto Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path? (or relate to different career paths) 2. How do
Technical data Housing material &URTHERôVERSIONSôONôREQUEST
Silencer Plastic version Sintered bronze with thread or plug connection Various construction Flat design for restricted space Stainless steel silencer Silencers are used to reduce the noise level of the
Section 13 Lift-Position Units
BOSCH BOSCH HN08-0 Section HP2 Units () are used at workstations when workpiece pallets have to be accurately positioned. Lift-position units lift the workpiece pallet from the conveying media so that
Accessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
FILLING & RELATED PROCESS IMPROVEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P FILLING phdinc.com (800) 624-8511 & RELATED PROCESS IMPROVEMENTS
PRIVATE HOUSE FERRARA
164 PRIVATE HOUSE FERRARA 165 MADE IN ITALY Una lastra di cartongesso che include un profilo in alluminio per accogliere la strip LED. Ecco il semplice concetto con cui Cartoon light consente di realizzare
SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CORDLESS 18V COMPACT BAND SAW STARTING C14A SERIAL NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). FIG. PART NO. DESCRIPTION OF PART NO. REQ. 0-- 0- x /" Pan Hd. Tapt. T- Screw () 0--00 M Pan Hd. T-0 Screw ()
MACHINING CENTER FOR THE COUNTERTOPS FABRICATION AND THE MEMORIALS BUILDING ENTIRE STRUCTURE IN STAINLESS STEEL RELIABLE, FAST AND PRECISE
ENTIRE STRUCTURE IN STAINLESS STEEL RELIABLE, FAST AND PRECISE MACHINING CENTER FOR THE COUNTERTOPS FABRICATION AND THE MEMORIALS BUILDING GRANITE MARBLE QUARTZ CERAMIC GLASS SYNTHETIC MATERIALS SEVEN
Protection for large size ceiling-mounted telescopic
Protection for large size ceiling-mounted telescopic Ideal for retail distribution IMPACK is an expanding pantograph-type protective barrier made from high-resistance profiles and top quality materials.
ALPHAIR PNEUMATIC ACTUATORS 120 Y SERIES X SERIES
ALPHAIR PNEUMATIC ACTUATORS Y SERIES - 18 X SERIES ALPHAIR AP-Y () AND AP-X (18) SERIES pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The internal
VERO-S Robot Coupling for Pallet Handling NSR 160 / PKL 160
Translation of the original assembly and operating manual VERO-S Robot Coupling for Pallet Handling NSR 160 / PKL 160 Assembly and Operating Manual Superior Clamping and Gripping Imprint Copyright: Imprint
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES The new series of ALPHAIR Pneumatic Actuators with special External Adjustment system meets every quality and precision requirement. The new
Module. Table of Contents. Section 9. Module NOTE: This section applies to applicators with UM50 modules.
9- Section 9 NOTE: This section applies to applicators with UM50 modules. Table of Contents... 9- Introduction... 9-2 Overview... 9-3 Pattern Control Troubleshooting... 9-4 Service... 9-5 Replacing a...
Modular pallet conveyor system XT
Modular pallet conveyor system PO X45 XS X65 Introduction X65P X85 System description The conveyor is a twin-track, flexible plastic chain pallet conveyor. The system is especially well suited for manual
SISTEMA DI PESATURA. by TERA LINE HMI. Weighing system. by TERA LINE HMI. Linea Sistemi Systems Line
SISTEMA DI PESATURA by TERA LINE HMI Weighing system by TERA LINE HMI Linea Sistemi Line STATUS Sistemi SISTEMA DI PESATURA by TERA LINE HMI Weighing system by TERA LINE HMI - È il risultato di diversi
Photoelectric Distance Sensors
292 Photoelectric distance sensors are used when distances to objects need to be measured or monitored or their precise position is to determined. They support positioning tasks, material fl ow controls
SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
SERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
Level measurement CleverLevel LBFS Point level detection
Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky
LV bolted straight joint connector BSLB-4/16, BSLU-4/16
BSLB-4/16, BSLU-4/16 These bolted connectors are designed for use in low voltage underground joints.. A brass body; its inner surface grooved at the manufacturing stage provides excellent electrical contact..
Level measurement CleverLevel LBFS Point level detection
Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky
ATI di Mariani S.r.l.
CERTIFICATO DI CONFORMITÀ DEL CONTROLLO DELLA PRODUZIONE IN FABBRICA CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL In conformità al Regolamento 305/2011/UE del Parlamento Europeo e del Consiglio
PROTEZIONE PER LAVELLO
PROTEZIONE PER LAVELLO SINK BOTTOM PROTECTION PROTEZIONE PER LAVELLO SINK BOTTOM PROTECTION LA GAMMA DI PROTEZIONI LAVELLO SCILM È MOLTO AMPIA: SPAZIA DALL INNOVATIVA PROTEZIONE TERMOFORMATA IN PLASTICA,