M/44000/M LINTRA rodless cylinders Double acting, magnetic piston

Size: px
Start display at page:

Download "M/44000/M LINTRA rodless cylinders Double acting, magnetic piston"

Transcription

1 M/000/M LINTR rodless cylinders > > Ø mm > > Compact, spacesaving design > > Proven sealing system > > djustable cushioning > > Magentic piston as standard Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Operating pressure:... 8 bar (... 6 psi) Technical data Cylinder diameters: 5,, 0 mm Strokes: 5000 mm or 96 inches max. Non-standard strokes: on request Operating temperature: C ( F) max. ir supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). Cylinder Ø (mm) 5 0 Port size G/8 G/8 G/ Cushion length (mm) 8 5 Theoretical thrusts at 6 bar (N) ir consumption (l/cm) per stroke at 6 bar 0,05 0,056 0,088 Loading values applicable to a speed of 0, m/s. Maximum working life is normally reached below a speed of m/s. Materials: arrel: nodised aluminium alloy End covers: luminium alloy Yoke: nodised aluminium alloy Cover and Pistons: Plastic Sealing strip: PU Cover strip: P Seals: NR & PU Option selector Porting Substitute ISO G-thread (standard) M NPT- hread C Cylinder Ø Substitute /0 /M/ Stroke 5000 max. in mm for ISO G-thread 96 max. in full inches for NPT-thread Fractional increments of stroke (inches) Substitute Substitute Substitute 0 /8 G / P /6 7/6 H /6 R /8 C / J 7/8 S /6 D 9/6 K 5/6 T / E 5/8 M Special 5/6 F /6 N Note: When specifying NPT ports the stroke should be given in inches without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5 en

2 M/000/M LINTR rodless cylinders Mountings 7 0 Model Type C Type V Type S Switch mountng brackets Magnetically operated switches 7 Ø Page 6 Page 6 Page 6 5 QM/05/ Q05M Q05M7 M/P787 QM/0/ Q0M Q0M7 M/P787 0 QM/00/ Q00M Q00M7 M/P787 Page 6 & 7 Item Type Description S Yoke: zinc plated steel Mounting support: anodised aluminium Screws: zinc plated steel olts: stainless steel C nodised aluminium Screws: zinc plated steel V Zinc plated steel Screws: zinc plated steel 7 racket Plastic 0 Fitting ody: PT, O-Ringe, NR Grab ring: stainless steel Release button: POM Data sheet: en en without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5

3 M/000/M LINTR rodless cylinders Loading values for LINTR Cylinders The values given in the table below show the forces in the directions Fy and Fz and the maximum moments Mx, My and Mz. ll values are applicable for speeds up to 0, m/s. requirement for using these values is a smooth movement of the mass over the whole stroke length of the cylinder. The reference point from which the moments for all cylinders should be calculated is the centre line of the piston. Total loads When a Lintra Cylinder has to take several loads and moments, an additional calculation is necessary using the following formula: Mx + My + Mz + Fy + Fz Mx max My max Mz max Fy max Fz max Ø Loading values (N) Fy Fz (N) Mx (Nm) My (Nm) Mz (Nm) Cylinder deflection Deflection due to external force. F (N) Deflection due to cylinder weight. f (mm) f= mm 0,6 0, ø5 ø ø ø0 ø ø5 0, (mm) Cylinder Ø 0 mm, external force 0 N, distance between supports 500 mm Required: Total deflection. Deflection due to external force (f): See diagram (mm/90 N) 0 N, mm. Deflection due to cylinder weight (f): See diagram +0,6 mm Total deflection:,9 mm (mm) Cylinder Ø mm, stroke length 500 mm, external load 00 N Maximum distance between supports = 500 mm (see diagram). Therefore additional support is required. Maximum permitted deflection: f + f mm per 000 mm stroke Result:,9 mm are below the max. permitted deflection of,5 mm 5/5 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH en

4 M/000/M LINTR rodless cylinders asic dimensions E M Z O W S S R E D T C S R E G G # stroke M cushion screw N x + # Ø E C D (Port threads) *) E E G M M N 5 7,5 5,,5 7 G /8 /8 NPT 00 0,5 8 M5-7 deep 8,5 67,8,5 7 G /8 /8 NPT M6-0 deep 0,5 79, 9 9,5 G / /8 NPT M6-0 deep Ø O R S S T W Z kg at 0 mm kg per 00 mm Model 5 5,5 M-,5 5,6 6, 0,60 0,5./05/M/* 6,5 5 6 M6-,5,5 9,5 0,90 0,5./0/M/* ,5 8 8,75 M6-9 0,8,8,0 0,5./00/M/* * Insert stroke length *) Optional ISO G or NPT-thread en without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5

5 M/000/M LINTR rodless cylinders QM/000/ Foot mounting Q000M Centre support mounting type - R D E H J K L ø U N ø S R P F C G djustable Ø C D E R Ø U kg Model (C) 5 8, ,5 5,5 0,0 QM/05/ , ,09 QM/0/ 0 7 7, ,5 9 0, QM/05/ Ø F G H J K L N P R Ø S kg Model (V) ,5 5, ,6 0,07 QM05M , ,5 QM05M , ,5 QM00M7 QM000M7 Swinging bridge mounting type S C F D E J G H Fx Ø C D E F G H J Fx kg Model (S) (Din7) M 5 ± N 0,5 QM05M M 6 ± 8 0 7, N 0,0 QM0M M 6 ± N 0,5 QM00M7 5/5 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH en

6 M/000/M LINTR rodless cylinders Technical data - Reed switches - additional informations see data sheet N/en..005 Symbol Voltage Current maximum Function Operating temperature LED Protection class Plug Cable length Cable type Weight Model (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + N Closer IP66, 5 or 0 PVC x 0,5 7 M/50/LSU/*V Closer IP66 5 PUR x 0,5 7 M/50/LSU/5U ~ U Closer IP66 Silicon x 0,5 7 TM/50/RU/S N U K U N + N ~ Changeover IP66 5 PVC x 0,5 7 M/50/RC/5V Closer IP66 M8 x 0, PVC x 0,5 6 M/50/LSU/CP *) ~ K * Insert cable length; *) Plug-in connector see page ; Color code: K = black, N = brown, U = blue Drawings M/50/LSU/*V, M/50/LSU/5U, TM/50/RU/S Cable length L =, 5 or 0 m - 5, 0 L M/50/RC/5V Cable length L = 5 m 5,,5-0 L ,5 M/50/LSU/CP - 5, 0 00 ±5, K,5 N U Fixing screw + N = brown; - U = blue (output) - K = black; + N = brown; - U = blue Plug M8 x, color code: K = black; N = brown; U = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0, 5 m 0, M x M/P59/5 en without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5

7 M/000/M LINTR rodless cylinders Technical data - Solid state - additional informations see data sheet N/en..007 Symbol pnp + N U K Voltage (V d.c.) Current maximum (m) Function Operating temperature ( C) LED Protection class Plug Cable length (m) Cable type Weight (g) Model PNP IP67, 5 or 0 PVC x 0, 7 M/50/EP/*V PNP IP68 5 PUR x 0, 7 M/50/EP/5U pnp npn npn + N U K U + N K + U N K PNP IP67 M8 x 0, PVC x 0, 6 M/50/EP/CP *) PNP IP67 M x 0, PVC x 0, 6 M/50/EP/CC *) NPN IP67, 5 or 0 PVC x 0, 7 M/50/EN/*V Closer IP67 M8 x 0, PVC x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: K = black, N = brown, U = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length L =, 5 or 0 m - 5, 0 L +0 ±,5 M/50/EP/CP, M/50/EN/CP - 5, 0 00 ±5, K,5 N U M/50/EP/CC - 5, 0 7,5 00 ±5 K U,5 N Fixing screw Color code: K = black; N = brown; U = blue Plug M8 x Plug M x Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5 Diese Produkte sind ausschließlich in Druckluftsystemen zu verwenden. Sie sind dort einzusetzen, wo die unter»technische Merkmale/- en systemen verwendete Komponenten auf verschiedene rten versagen. Systemauslegern wird dringend empfohlen, die Störungsarten aller

VSM/55600/N2, Hollow piston rod cylinder Magnetic piston, double acting

VSM/55600/N2, Hollow piston rod cylinder Magnetic piston, double acting VSM/55600/N, Hollow piston rod cylinder > > Ø 5 and 0 mmm > > Ideally suited for vacuum selected liquid transfer applications through the piston rod > > Non-rotating and telescopic piston rod provides

More information

RA/28000;.../M, RA/28300;.../M Pneumatic cylinder, ISO Non-magnetic & magnetic piston, single acting Ø mm

RA/28000;.../M, RA/28300;.../M Pneumatic cylinder, ISO Non-magnetic & magnetic piston, single acting Ø mm /8000;.../M, /800;.../M Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, single acting... 00 mm High performance, stability and reliability Cylinders and mountings conform to ISO 555 (ISO 6,

More information

PRA/862000/M, IVAC Industrial cylinder Magnetic piston, double acting

PRA/862000/M, IVAC Industrial cylinder Magnetic piston, double acting PR/86000/M, IVC Industrial cylinder > > Ø... 00 mm > > Cylinders and mountings conform to ISO 555 > > Complete functional unit > > Integrated 5/ or 5/ valve > > dditional output ports ( & ) > > Integrated

More information

F64G - Olympian Plus Plug-In System General purpose filter

F64G - Olympian Plus Plug-In System General purpose filter > > Port size: /... 3/ (ISO G/PTF) > > Quick release bayonet bowl > > Effective liquid removal and positive solid filtration > > Large filter element area for minimum pressure drop Technical features Medium:

More information

DM/..., DC/95000, DM/..., DC/96000

DM/..., DC/95000, DM/..., DC/96000 D/..., DC/95000, D/..., DC/96000 Compact cylinders Single acting Ø 12 to 50 mm ight weight Compact design, which is considerably shorter than IS/VD or NF equivalent. ow friction characteristics for high

More information

Over pressure Switching pressure difference (typical) Lower range Upper range

Over pressure Switching pressure difference (typical) Lower range Upper range Allfluid pressure switches electromechanical actuated -... 63 bar, G/2 For Ex zones and 2 (gases) as well as Ex zones 2 and (dusts) category II2G, type of protection EEx de IIC T6 Microswitch with gold

More information

PRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches.

PRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches. PRESSURE SWITCHES 8D-LT Electro-mechanical pneumatic pressure switches 8D-LT x Electro-mechanical pneumatic pressure switches Page -0 Page -0-0 8D-LT G/, / NPT or flange Microswitch with gold plated contacts

More information

ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4

ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4 ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...

More information

Short Stroke Cylinders ISO Bores from 12 to 100 mm

Short Stroke Cylinders ISO Bores from 12 to 100 mm Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic

More information

HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting

HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational

More information

HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting

HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting FH G G S F J H2 LB2 N/ S/F Specifications Thin parallel hand (bush/bearing guide) Double acting Series Operational stroke length: HLA,, 25mm 13,, 23mm Descriptions HLA Size Cylinder bore size mm CS CS

More information

UFR+L FILTER REGULATOR + LUBRICATOR

UFR+L FILTER REGULATOR + LUBRICATOR FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for

More information

FN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring

FN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring Level Measurement and Monitoring FN04 Liquid level sensor with continuous detection Level measurement unaffected by foam formation, conductivity, pressure or temperature Remote indication over very long

More information

Series AMR. Magnet Type Rodless Cylinder. Bore size(mm) : ф10, ф16, ф20, ф25, ф32, ф40 W13 G H AMRB. How to Order A - 268

Series AMR. Magnet Type Rodless Cylinder. Bore size(mm) : ф10, ф16, ф20, ф25, ф32, ф40 W13 G H AMRB. How to Order A - 268 Magnet Type Rodless Cylinder Bore size : ф10, ф16, ф0, ф5, ф3, ф40 PRECISION STINLESS BODY FOR SMOOTH CTUTION LIHT WEIHT COMPCT DESIN LEK FREE NON - LUBRICTION STNDRD POSITION SENSIN CPBLE How to Order

More information

16CS. Double acting Compressed air to 60 M LED (ON lighting) 980m/s 2

16CS. Double acting Compressed air to 60 M LED (ON lighting) 980m/s 2 FH1 G B FH F J H2 LB2 N/ S/F Specifications Descriptions Size Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Open

More information

Serial SA Metering Elements

Serial SA Metering Elements Lubricant inlet Outlet Characteristics Working pressure: max. 400 bar min. 20 bar; Working pressure without check valves for ricirculating systems: min. 12 bar(170 psi); N. cycles per minute: max. 120;

More information

Pinch Control Valve 7079

Pinch Control Valve 7079 DN 5 up to DN 50 New generation of pinch control valves with revised inner tube for demanding applications or food fluids. Compact design with rotatable actuator Uneffected by contaminated, granulated,

More information

ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES

ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW RESERIES ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES The new series of ALPHAIR Pneumatic Actuators with special External Adjustment system meets every quality and precision requirement. The new

More information

Magnetic float switch For vertical installation Model FLS for nuclear power plants

Magnetic float switch For vertical installation Model FLS for nuclear power plants Level measurement Magnetic float switch For vertical installation Model FLS for nuclear power plants KSR data sheet FLS for NPP for further approvals see page 3 Applications Level measurement for almost

More information

SITRANS F flowmeters. SITRANS F VA Tubux variable area meter 4/279. Overview

SITRANS F flowmeters. SITRANS F VA Tubux variable area meter 4/279. Overview Overview Design and operation The main components of the Tubux variable area meters are the glass variable-area flow tube with float, the fitting and the connection parts. The flow is displayed directly

More information

PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES

PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of

More information

Pressure Regulators K Series

Pressure Regulators K Series Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters

More information

ALPHAIR PNEUMATIC ACTUATORS

ALPHAIR PNEUMATIC ACTUATORS September 201 ALPHAIR PNEUMATIC ACTUATORS 90 - I Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The

More information

Bore size (mm): 20, 25, 32, 40, 50, 63, 80, 100

Bore size (mm): 20, 25, 32, 40, 50, 63, 80, 100 JIS Standard ompact ydraulic ylinder ompact ydraulic ylinder Series KD/KG Series KD Series KG Nominal pressure: MPa ore size :,,,,,,, 0 Q K N M S 2 Nominal pressure: 1 MPa ore size :,,,,,,, 0 ourtesy of

More information

PNEUMATIC RACK & PINION ACTUATORS

PNEUMATIC RACK & PINION ACTUATORS PNEUMATIC RACK & PINION ACTUATORS 90-120 - 180 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design,

More information

VALVES. Prospector Series Poppet Valves 1/4" to 2" Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves

VALVES. Prospector Series Poppet Valves 1/4 to 2 Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves 2 High flow - Cv of 1.2 to 49.5 Durable, robust construction Two mounting styles: inline or subbase 1/4" to 2" ports (SPP or PTF threads) Wide range of ir Pilot Operators available Four functional types:

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

SELECTION GUIDE Appearance Sensing distance Operation Mode Connector Shape example (M8) Outer diameter (Ferrous material only) Wiring Output Output no

SELECTION GUIDE Appearance Sensing distance Operation Mode Connector Shape example (M8) Outer diameter (Ferrous material only) Wiring Output Output no Stainless Steel Sensing Face Proximity Switch Model FL7S The FL7S is a proximity switch having a stainless steel sensing face and housing, and is specially designed for welding applications on the automobile

More information

09. MACHINE ACCESSORIES. 202 Moulding Supplies Edition 9 // MOULD SCREENS 09.2 MOULD ALIGN 09.

09. MACHINE ACCESSORIES. 202 Moulding Supplies Edition 9 // MOULD SCREENS 09.2 MOULD ALIGN 09. 09. MACHINE ACCESSORIES 203 203 204 09.1 MOULD SCREENS 09.2 MOULD ALIGN 09.3 EJECTOR COUPLING 208 209 211 09.4 MACHINE MOUNTS 09.5 LINEAR TRANSDUCER 09.6 HYDRAULIC COUPLERS 202 Moulding Supplies Edition

More information

Glycerine filled Bourdon tube pressure gauges EN 837-1

Glycerine filled Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys. For measurement in areas with high levels of vibration and high, dynamic pressure

More information

Pressure Regulators K Series

Pressure Regulators K Series www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

More information

Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.

Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2

More information

Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K

Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300

More information

Photoelectric Distance Sensors

Photoelectric Distance Sensors 292 Photoelectric distance sensors are used when distances to objects need to be measured or monitored or their precise position is to determined. They support positioning tasks, material fl ow controls

More information

Diaphragm pressure gauge

Diaphragm pressure gauge Diaphragm pressure gauge with switch function, NS 00/60,Type series BE2 Features Diaphragm pressure gauge with switch function High quality case with bajonet ring NS 00/60 per EN 837-3 S, alternative safety

More information

min. 50min. 65min. PIT / P3 / P4 Ø

min. 50min. 65min. PIT / P3 / P4 Ø Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange

More information

Sanitary Pressure Regulators RHPS Series

Sanitary Pressure Regulators RHPS Series www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures

More information

Diaphragm seal with threaded connection Threaded design Model

Diaphragm seal with threaded connection Threaded design Model Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous

More information

Pre s sure Re gulators

Pre s sure Re gulators www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch

More information

Unloading Valve Series R4U

Unloading Valve Series R4U Characteristics Series RU Subplate mounted unloading valves series RU are used to unload a circuit at low pressure. The mechanically adjustable pressure signal to unload the main stage has to be applied

More information

Vibranivo Mononivo. Series VN 4000 MN Series. Instruction manual

Vibranivo Mononivo. Series VN 4000 MN Series. Instruction manual Vibranivo Mononivo Series Series VN 4000 MN 4000 Instruction manual 010516 1 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de

More information

QGO Oxygen Sensor. Building Technologies HVAC Products

QGO Oxygen Sensor. Building Technologies HVAC Products 7 842 QGO20.000D17 QGO20.000D27 Oxygen Sensor QGO20.000... The QGO20... is an oxygen sensor designed for acquiring the residual oxygen content of flue gases in heat generation plant burning natural gas

More information

P600 Pressure Regulator

P600 Pressure Regulator P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with

More information

BEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103

BEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance

More information

ALPHAIR PNEUMATIC ACTUATORS 120 Y SERIES X SERIES

ALPHAIR PNEUMATIC ACTUATORS 120 Y SERIES X SERIES ALPHAIR PNEUMATIC ACTUATORS Y SERIES - 18 X SERIES ALPHAIR AP-Y () AND AP-X (18) SERIES pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The internal

More information

Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting

Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet

More information

Standard and Low-Flow 100 PLUS Powder Feed Pumps

Standard and Low-Flow 100 PLUS Powder Feed Pumps Instruction Sheet P/N 036G Standard and Low-Flow 00 PLUS Powder Feed Pumps Introduction Standard and low-flow 00 PLUS powder feed pumps are used to pump organic and metallic powder coatings to powder spray

More information

LMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.

LMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO. Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma -wire: 0 0 V others on request

More information

799 Z VALVE WITH AP PNEUMATIC ACTUATOR

799 Z VALVE WITH AP PNEUMATIC ACTUATOR Pressure (bar) 799 Z VALVE WITH AP PNEUMATIC ACTUATOR FEATURES The 2-way ball-valve 799 Z is designed for the shut-off of HP hydraulic networks up to 1 or 20 bars, according to the diameters. POM floating

More information

Technical data and load data of linear actuators

Technical data and load data of linear actuators and load data of linear actuators 117 Ø Linear actuator Fx in N Fy in N Fz in N Mx in Nm My in Nm Mz in Nm Tube clamp connectors, Linear actuators l = 500 l = 1000 l = 1500 l = 500 l = 1000 l = 1500 18

More information

Suction Filter - SE. Working Temperature From -25 to +110 C. Materials. Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide

Suction Filter - SE. Working Temperature From -25 to +110 C. Materials. Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide COMPONENTS Pressure (ISO 077-:00) Max working:, MPa ( bar) Test:,5 MPa (5 bar) Bursting:,5 MPa (5 bar) Collapse, differential for the filter element (ISO 9): 00 kpa ( bar) Bypass Valve Setting: 5 kpa (0,5

More information

ILMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.

ILMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO. ILMK 8 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma

More information

RCI 400 Series Actuators

RCI 400 Series Actuators PNEUMATIC RCI 400 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 400 Series offers a lower cost alternative to our highly successful scotch yoke design. The addition of this product broadens

More information

Miniature I/P, E/P Transducer

Miniature I/P, E/P Transducer Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional

More information

Level Switch. Series. instrumentation for fluids LC40. Instructions Manual

Level Switch. Series. instrumentation for fluids LC40. Instructions Manual instrumentation for fluids Level Switch Series LC40 Instructions Manual R-MI-LC40 Rev.:3 English Version TABLE OF CONTENTS 1. INTRODUCTION... 3 2. RECEPTION... 3 3. INSTALLATION... 3 4. ELECTRICAL CONNECTION...

More information

Industrial flue gas probes. Instruction manual

Industrial flue gas probes. Instruction manual Industrial flue gas probes Instruction manual 2 1 Contents 1 Contents 1 Contents... 3 2 Safety and the environment... 4 2.1. About this document... 4 2.2. Ensure safety... 4 2.3. Protecting the environment...

More information

Precision Lead Screws

Precision Lead Screws Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017

More information

E 444 E 454 E 464 E 644 Tank top mounting Connection up to SAE 2 Nominal flow rate up to 680 l/min / gpm

E 444 E 454 E 464 E 644 Tank top mounting Connection up to SAE 2 Nominal flow rate up to 680 l/min / gpm Return Filters E E 5 E 6 E 6 Tank top mounting Connection up to SAE Nominal flow rate up to 68 l/min / 79.7 gpm Description Application In the return line circuits of hydraulic systems. erformance features

More information

BOD 21M Distance Sensors. Effortless performance High efficiency

BOD 21M Distance Sensors. Effortless performance High efficiency BOD 21M Distance Sensors Effortless performance High efficiency Linear Position Sensing Comprehensive systems expertise. Technological variety. Optimal solutions. Displacement sensing exactly what you

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Supplementary electronics for 4-wire connection Structural design Dimensions (W x H x D) in mm (inch) Electrical connection 80x10x60 (3.15x4.7x.36) Screw terminals (Pg 13.5 cable inlet) or Han

More information

Thermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell

Thermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell type stainless steel Ed.17.01 Design Thermometer in stainless steel in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell Type Design EN 13190 Case diameter Dim

More information

SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:

SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application: SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-

More information

Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases

Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or

More information

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16 Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated

More information

Multi Ejector Solution TM for R744 (CO 2 ) Type - CTM 6 High Pressure (HP)

Multi Ejector Solution TM for R744 (CO 2 ) Type - CTM 6 High Pressure (HP) Data sheet Multi Ejector Solution TM for R744 (CO 2 ) - CTM 6 High (HP) Multi Ejector Solution TM, consists of a CTM 6 High valve and an AK-PC 782A controller. This solution makes CO 2 refrigeration systems

More information

For highest levels of purity

For highest levels of purity For highest levels of purity Gas purification systems www.airliquide.de Individual gas purification... versatile, quick and clean Proven technology For several decades, Air Liquide has been offering you

More information

Flow Rate Transmitters/ Flow Switches

Flow Rate Transmitters/ Flow Switches Flow Rate ransmitters/ Flow Switches FOw RAE RANSMIERS FOw SwICHES o measure the flow rate in machines and systems HYDAC EECRONIC offers various fl ow rate transmitters and fl ow switches. he fl ow rate

More information

Contact thermometer. Bimetal- or Gas actuated thermometer. Description. Features. Measuring ranges. Options. Applications

Contact thermometer. Bimetal- or Gas actuated thermometer. Description. Features. Measuring ranges. Options. Applications Force Pressure Temperature Switch Contact thermometer Bimetal- or Gas actuated thermometer - Inductive contacts - Sliding contacts - Snap action contact - Class 1 acc. to DIN EN 13190 - Optional with liquid

More information

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I.

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I. 0 SERIES Working pressure 60 bar Style S Style D.I. D.I. Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon Pressure Working pressure: 60 bar (6 MPa)

More information

Multi Ejector Solution TM for R744 (CO 2 ) Product type - CTM 6 Low Pressure (LP)

Multi Ejector Solution TM for R744 (CO 2 ) Product type - CTM 6 Low Pressure (LP) Data sheet Multi Ejector Solution TM for R744 (CO 2 ) Product type - CTM 6 Low (LP) Danfoss Multi Ejector Solution TM, consists of a CTM 6 Low valve and an AK-PC 782A controller. This solution makes CO

More information

MV en /7 MV Knife gate valve DN

MV en /7 MV Knife gate valve DN 1/7 The Stafsjö knife gate valve is a valve designed for a wide range of process industry applications. Its main applications are fluids and suspensions up to 5%. It is also used in services with sludge,

More information

Gas Pressure Regulator HON 330

Gas Pressure Regulator HON 330 Gas Pressure Regulator HON 330 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 330.20 EDITION 01/2017 330.20 p. 2 330.20 p. 23 Compensating diaphragm (118,168, 243,

More information

HD 152 HD 172 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to 190 l/min

HD 152 HD 172 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to 190 l/min High Pressure Filters Worldline HD HD 7 In-line mounting Operating pressure up to bar Nominal flow rate up to 9 l/min Description Application In the high pressure circuits of hydraulic systems. Performance

More information

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up to 0... 0 bar Output signals

More information

Level measurement CleverLevel LBFS Point level detection

Level measurement CleverLevel LBFS Point level detection Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky

More information

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I.

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I. 0 SERIES Working pressure 60 bar Style S Style D.I. D.I. Technical data Filter housing (Materials) Head: nodised luminium Housing: nodised luminium ypass valve: Nylon Pressure Working pressure: 60 bar

More information

Linear Tables. Portal Linear Drive

Linear Tables. Portal Linear Drive Mechanical Linear Drive Linear Tables Ball Screw Drive Compact Module Portal Linear Drive Portal Linear Drive PRODUCT LINES Linear Tables Mechanical Linear Drive Compact Module Portal Linear Drive Portal

More information

BM SERIES COMPACT GUIDE WAVE GUIDED WAVE RADAR LEVEL INSTRUMENTS

BM SERIES COMPACT GUIDE WAVE GUIDED WAVE RADAR LEVEL INSTRUMENTS GUIDED WAVE RADAR LEVEL INSTRUMENTS DESCRIPTION The microwaves impulses at high frequency travel through a stainless steel guide and they are reflected on the surface of the fluid to analyze. The period

More information

Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models

Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch

More information

Photo Resistive Flame Detectors

Photo Resistive Flame Detectors 7 714 QRB1... with large QRB1... with small QRB1...B with flange and clamp flange and clamp with plug flange and clamp Photo Resistive Flame Detectors QRB1... Photo resistive detectors for use with Siemens

More information

E 443 E 453 E 463 E 643. Tank top mounting Connection up to SAE 2 Nominal flow rate up to 550 l/min e

E 443 E 453 E 463 E 643. Tank top mounting Connection up to SAE 2 Nominal flow rate up to 550 l/min e R e t u r n F i l t e rs E 443 E 453 E 463 E 643 Tank top mounting Connection up to SAE 2 Nominal flow rate up to 550 l/min 20.50-4e D e s c r i p t i o n Application In the return line circuits of hydraulic

More information

Level measurement CleverLevel LBFS Point level detection

Level measurement CleverLevel LBFS Point level detection Product highlights Save detection of liquids, bulk-solids and powders Short immersion length Ecellent cleanability Ability for differentiation between foam and liquid Not sensitive to adherent or sticky

More information

2013 by KVT-KOENIG GROUP >

2013 by KVT-KOENIG GROUP > CATALOG 2014 2013 by KVT-KOENIG GROUP > www.kvt-koenig.com KVT - KOENIG GROUP SFC KOENIG is an internationally wellknown specialist for high-quality sealing and flow control applications. In all areas,

More information

Temperature sensors for automotive applications

Temperature sensors for automotive applications Temperature sensors for automotive applications When the precise measurement of temperature is a critical aspect to the safety of a process, the importance of precision quality thermocouple material is

More information

Diaphragm seal with flange connection With internal diaphragm, threaded design Model

Diaphragm seal with flange connection With internal diaphragm, threaded design Model Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,

More information

Standard Bourdon tube pressure gauges EN 837-1

Standard Bourdon tube pressure gauges EN 837-1 Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,

More information

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up

More information

VERO-S Robot Coupling for Pallet Handling NSR maxi 200 / PKL maxi 200

VERO-S Robot Coupling for Pallet Handling NSR maxi 200 / PKL maxi 200 Translation of the original manual VERO-S Robot Coupling for Pallet Handling NSR maxi 200 / PKL maxi 200 Assembly and Operating Manual Superior Clamping and Gripping Imprint Copyright: Imprint This manual

More information

2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical

2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8 and 1/4 NPT. Features. Construction. Electrical ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel

More information

markilux RS-2 More free space, opening up boundless possibilities INNOVATIONS 2017 rated to wind resistance class 3 (corresponds to Beaufort 6)

markilux RS-2 More free space, opening up boundless possibilities INNOVATIONS 2017 rated to wind resistance class 3 (corresponds to Beaufort 6) INNOVTIONS rated to wind resistance class 3 (corresponds to Beaufort 6) More free space, opening up boundless possibilities INNOVTIONS Detailed view with 3 crossbars on one post - freely positionable in

More information

Field case for temperature transmitter Model TIF11

Field case for temperature transmitter Model TIF11 Electrical temperature measurement Field case for temperature transmitter Model TIF11 WIKA data sheet TE 62.02 Applications Plant construction Process engineering General industrial applications Energy

More information

1071 Cast Steel Globe Steam Stop Valve (Flanged)

1071 Cast Steel Globe Steam Stop Valve (Flanged) 1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working

More information

Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators

Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...

More information

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR

More information

4-Beam-Turbidity Meter ITM-4

4-Beam-Turbidity Meter ITM-4 1 Product Information ITM-4 4-Beam-Turbidity Meter ITM-4 Application / Specified Usage Authorizations Turbidity measurement from 0 up to 5000 NTU resp. 0 up to 1250 EBC Filter monitoring Phase separation

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG Series -FPG Series -FPQ P N Speed controllers for clean room use V S R Q -FPQ: (electroless nickel plated) and -FPG: are now available as

More information