Super PROMOTIONS Special OFFERS. Machining Intelligently ISCAR HIGH Q LINES. Valid from January 15 until June 30, 2017 ENDUSERS.

Transcription

1 Valid from January 15 until June 30, 2017 ENDUSERS S Machining Intelligently ISCAR HIGH Q LINES

2 HELIMILL Cutters Carrying Triangular Inserts with 3 Helical Cutting Edges 1 10 HM390 TPKT/TPCT 10 or TDKT/TDCT 15 Inserts Per Pocket Receive 1 Corresponding Cutter up to 5" FREE OF CHARGE * Tool and inserts Valid from January 15 until March 31, 2017

3 HELITANG T T490 LNMT/LNHT 11 Inserts Per Pocket and SWAP a Competitor's Cutter Receive 1 Corresponding Cutter up to 4.00" FREE OF CHARGE SWAP * Tool and inserts 3 Valid from January 15 until March 31, 2017

4 1 New Cutters Carrying Square Single-Sided Inserts 10 FFQ4 SOMT 12 Inserts per Pocket and SWAP a Competitor's Cutter Receive 1 Corresponding Cutter up to 4.00" FREE OF CHARGE New SWAP 4 Valid from January 15 until March 31, 2017

5 Double-Sided Twisted Insert No Depth of Cut Limitation 20 DGN DO-GRIP Inserts up to 6 mm (Included) Receive 1 Corresponding DGFH 26/32 Blade FREE OF CHARGE 2 Valid from January 15 until June 30, 2017

6 Flat Top TANG-GRIP IQ Tools Engineered for Higher Productivity and Easy Chip Evacuation 20 TAG Inserts up to 6 mm (Included) Receive 1 Corresponding TGSU IQ or TGFH 26/32... Blade FREE OF CHARGE BLADE 3 Valid from January 15 until June 30, 2017

7 1 HCP-IQ SUMOCHAM IQ Drilling Heads 6 ICP/ICK/ICM/FCP/HCP SUMOCHAM IQ DRILL HEADS + Corresponding Drill Body up to 8XD Receive 25% ADDITIONAL DISCOUNT* * Tool and inserts HEADS 4 Valid from January 15 until June 30, 2017

8 2 10 ICP/ICK/ICM/FCP/HCP SUMOCHAM-IQ Drill Heads and SWAP a Competitor's Drill Body Receive 1 Corresponding Drill Body up to 8XD FREE OF CHARGE + 10% ADDITIONAL DISCOUNT on the Drill Heads SWAP Blowout * Tool and inserts 5 Valid from January 15 until June 30, 2017

9 1 20 AOMT 04 /SOMX 05/06/07 / SOMT 09/12/16 Inserts + 1 Corresponding Drill Body up to 2.00" / 50 mm Receive 25% ADDITIONAL DISCOUNT* * Tool and inserts PROMOTIONS Valid from January 15 until June 30, 2017

10 1 2 Laydown Threading Inserts 10 Threading 11 ER/IR or 16ER/IR Inserts of Any Assortment* Receive 10% ADDITIONAL DISCOUNT 15 Threading 11 ER/IR or 16ER/IR Inserts of Any Assortment* Receive 15% ADDITIONAL DISCOUNT * Min. pack size 7 Valid from January 15 until June 30, 2017

11 1 2 Integral Solid Carbide Mill Thread 2 Integral Solid Carbide Mill Thread Endmills of the Same Item* Receive 10% ADDITIONAL DISCOUNT 4 Integral Solid Carbide Mill Thread Endmills of any Assortment* Receive 15% ADDITIONAL DISCOUNT * MTEC /MTECS /MTECSH /MTECB /MTECZ 8 Valid from January 15 until June 30, 2017

12 ISCAR Grades Solutions for Machining Steel, Gray Cast Iron, Stainless Steel and High Temperature Alloys The new grades are available in the following geometries: R S D T C W V ISCAR offers a wide range of PVD coated grades for machining different types of materials. The SUMOTEC grades feature a special post-coating treatment which provides substantially improved tool life and better reliability. The new process improves toughness and chipping resistance, reduces friction and built-up edge, thus increasing tool life. PVD Grades: A hard submicron substrate, TiAlN PVD coated grade followed by a special SUMO TEC surface treatment. Suitable for turning hard nickel base alloys / Inconel (40-50 HRC) at low to medium cutting speeds. A tough submicron substrate, TiAlN PVD coated grade followed by a special 'SUMO TEC' surface treatment. Suitable for turning Inconel at low to medium cutting speeds. ISO Range - (S15-S25) A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance ISO Range (P20-P50)(M20-M30) (S15-S40) A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Develope d for machining of heat resistant alloys, austenit ic stainless steel and hard steel. A tough submicron substrate, TiAlN PVD coated grade. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. A tough sub-micron substrate, 'SUMO TEC' TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel. ISO Range - (H05-H15) (S05-S20) (M05-M20) ISCAR's toughest coated grade for machining stainl ess steel, high temperature alloys, at low to medi um cutting speed, used for interrupted cuts and very heavy machining. 9 Valid from January 15 until June 30, 2017

13 40 PVD Insert Grades of Any Assortment* Receive 20% ADDITIONAL DISCOUNT * IC804/IC806/IC807/IC830/IC907/IC908/IC Valid from January 15 until June 30, 2017

14 1 Inserts for Semi-Finishing and Finishing Applications 30 FLASH TURN Inserts Receive 15% ADDITIONAL DISCOUNT 2 40 FLASH TURN Inserts Receive 20% ADDITIONAL DISCOUNT 11 Valid from January 15 until June 30, 2017