PRA/862000/M, IVAC Industrial cylinder Magnetic piston, double acting

Transcription

1 PR/86000/M, IVC Industrial cylinder > > Ø mm > > Cylinders and mountings conform to ISO 555 > > Complete functional unit > > Integrated 5/ or 5/ valve > > dditional output ports ( & ) > > Integrated flow regulator for speed control > > Reed or solid state switches can be mounted flush with the profile barrel > > Protection class IP65 > > Energy efficient 7 Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Particles size: Class 7, ISO 857 (dated 00) Humidity and water content: ir supply must be dry. Corresponding of the application and working conditions the air must be dry enough to avoid condensate. The pressure dewpoint must be minimum 5 under the application and working conditions. Oil: Class, ISO 857 (dated 00) : ased on ISO 555 (length, mounting pitch and thread dimensions according to ISO 555. Some outside dimensions different to ISO 555) Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure:... 8 bar ( psi) Port size: G/8, G/, G/8 Cylinder diameters:, 0, 50, 6, 80, 00 mm strokes: See below Non-standard strokes: vailable ( mm) Operating temperature: C max. ( F) Supply voltage: V d.c. (±0 %) (other voltages supply on request) Power consumption: W max Electrical connection: DIN EN750-80, form C Manual override: Turn and look Rating: 00 % E.D. Protection class: IP 65 ife expectation of the cylinder: *) Stroke < 00 mm: 0 Mio. Cycles Stroke > 00 mm: 5000 km ife expectation of the solenoid valves: 50 Mio. Cycles *) ife expectation based on laboratory conditions (more details upon request): - Operating pressure: 8 bar - Compressed air: ISO 857-, Class mbient temperature: 0 C +/-0 C - Environment: Industrial plant, no contamination such as dust and/or moisture or similar - Position: horizontal - Side load: max. transverse load approx.,% of the theoretical force at 6 bar - Speed:,0 m/s for Ø to 50 mm 0,7 m/s for Ø 6 to 00 mm - Frequency: < 0 cycles / min (in/out) Materials: Profile barrel: anodised aluminium, End covers: pressure diecast anodised aluminium Piston rod: stainless steel, see page Piston rod seals: PUR Piston seals: PUR O-rings: NR Technical data Cylinder Ø (mm) Port size G /8 G /8 G /8 G / G / G /8 Piston rod Ø (mm) Piston rod thread M0 x,5 M x,5 M6 x,5 M6 x,5 M0 x,5 M0 x,5 Cushion length (mm) Theoretical thrusts at 6 bar outstroke (N) Theoretical thrusts at 6 bar instroke (N) ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,7 0,8 0,5 0,55 ir consumption at 6 bar instroke (l/cm) 0,05 0,076 0,7 0,98 0, 0,5 strokes Cylinder Ø (mm) Stroke length (mm) without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8 en

2 PR/86000/M, IVC Industrial cylinder Cylinder variants Symbol R S C D Model with magnetic piston Description PR/86000/MI cylinder 7 PR/86000/W Cylinder with special wiper/ seal (suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice) 7 PR/86000/MU Cylinder with extended piston rod Dimensions Page 7 PR/86000/MG Cylinder with piston rod bellow 8 For the cylinder models style C, D, and S see options selector Option selector Piston rod material Stainless steel (martensitic); wiper seal Stainless steel (austenitic); wiper seal Hard chromium plated; wiper seal Substitute R S C P /86 / // Strokes (mm) 000 max. Valve function *) 5/ way solenoid/spring, cylinder instroke without current Substitute R Stainless steel (austenitic); hard chromium plated; wiper seal Stainless steel (austenitic); Smooth wiper seal Stainless steel (austenitic); hard chromium plated; Smooth wiper seal Cylinder Ø (mm) 0, 00, 050, 06, 080, 00 Variants (magnetic piston) Piston rod bellow Special wiper seal Extended piston rod, P**/86***/MU/****/*** D V E Substitute Substitute MI MG W MU Extension (mm) 5 5/ way solenoid/spring, cylinder outstroke without current 5 5/ way solenoid operated, solenoid return, bistable 5 5/ way solenoid operated, solenoid return, all ports blocked (P) E Note: This options selector explains only the cylinder variants. For combinations of cylinder variants consult our technical service. 5 5/ way solenoid operated, solenoid return, centre open exhaust (COE) C 5 *) Version with pilot operated valves on request. en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

3 PR/86000/M, IVC Industrial cylinder Reduced Installation Time & Cost To connect the IVC you simply run a single ring main to provide an air supply to each unit. There is no mounting of valve islands to the machine framework or inside a cabinet and there is no pipework to run arround the machine to connect each valve to each actuator 5 Plug 6 5 Plug with molded cable 6 ir supply One of the advantages of the IVC cylinders is to use the output ports ( & ) from the main valve to operate an additional cylinder. 6 Electrical connection Output ports (&) 6 ir supply 7/8 without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH en

4 PR/86000/M, IVC Industrial cylinder Mountings Position Style Corrosion protected, G Clear anodised aluminium Clear anodised aluminium. Screws: C Galvanized steel (ø... 6 mm) Painted steel (ø 80 & 00 mm) R Diecast aluminium lack corrosion protected diecast aluminium. Certified for the food industry. Screws: UR Galvanized aluminium Inner ring: steel Outer ring: brass 5 D Diecast aluminium olt: galvanized steel (martensitic) Circlip: galvanized steel lack corrosion protected diecast aluminium Certified for the food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel lack corrosion protected diecast aluminium Certified for the food industry olt: X 0 Cr Ni S 8 9 (.05, ISI 0) Circlip: Stainless steel (martensitic). Screws: 6 SW Diecast aluminium lack corrosion protected diecast aluminium Certified for the food industry 7 US Galvanized aluminium. Inner ring: steel Outer ring: brass 8 D Painted cast iron. olt: stainless steel (martensitic) Circlip: galvanized steel 9 FH Cast iron 0 Galvanized steel Screw S Clear anodised aluminium earing: brass 5 F Galvanized steel olt: galvanized steel Circlip: Galvanized steel 6 SS Painted cast iron 7 UF Galvanized steel. Inner ring: steel Outer ring: brass 8 K Galvanized steel Nickel plated steel Circlip: X 0 Cr Ni S 8 9 (.05, ISI 0) olt: X 0 Cr Ni S 8 9 (.05, ISI 0) Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel. en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

5 PR/86000/M, IVC Industrial cylinder Mountings Model K, G C D D F FH Cyl. Ø 0 Page 9 8 Page 9 Page 9 Page 9 5 Page 9 8 Page 9 5 Page 0 9 Page 0 QM/80/5 QM/805/8 Q/80/ Q/80/ Q/80/ Q/80/ QM/805/5 Q/80/ 0 QM/80/5 QM/800/8 Q/800/ Q/800/ Q/800/ Q/800/ QM/800/5 Q/800/ 50 QM/8050/5 QM/8050/8 Q/8050/ Q/8050/ Q/8050/ Q/8050/ QM/8050/5 Q/8050/ 6 QM/8050/5 QM/8050/8 Q/806/ Q/806/ Q/806/ Q/806/ QM/8050/5 Q/806/ 80 QM/8080/5 QM/8080/8 Q/8080/ Q/8080/ Q/8080/ Q/8080/ QM/8080/5 Q/8080/ 00 QM/8080/5 QM/8080/8 Q/800/ Q/800/ Q/800/ Q/800/ QM/8080/5 Q/800/ Corrosion protected PVQ/80/ PVQ/80/ PVQM/805/5 0 PVQ/800/ PVQ/800/ PVQM/800/5 50 PVQ/8050/ PVQ/8050/ PVQM/8050/5 6 PVQ/806/ PVQ/806/ PVQM/8050/5 80 PVQ/8080/ PVQ/8080/ PVQM/8080/5 00 PVQ/800/ PVQ/800/ PVQM/8080/5 R S SS SW UF UR US Cyl. Ø Page 0 Page 0 6 Page 6 Page 7 Page 0 Page 7 Page Q/80/7 Q/80/ M/P99 M/P99 QM/805/ Q/80/ M/P00 0 Q/800/7 Q/800/ M/P99 M/P99 QM/800/ Q/800/ M/P0 50 Q/8050/7 Q/800/ M/P99 M/P995 QM/8050/ Q/8050/ M/P0 6 Q/806/7 Q/806/ M/P99 M/P996 QM/8050/ Q/806/ M/P0 80 Q/8080/7 Q/806/ M/P995 M/P997 QM/8080/ Q/8080/ M/P0 00 Q/800/7 Q/800/ M/P996 M/P998 QM/8080/ Q/800/ M/P05 Corrosion protected PVQ/80/7 M/P059 PVQM/805/ PVQ/80/ 0 PVQ/800/7 M/P060 PVQM/800/ PVQ/800/ 50 PVQ/8050/7 M/P06 PVQM/8050/ PVQ/8050/ 6 PVQ/806/7 M/P06 PVQM/8050/ PVQ/806/ 80 PVQ/8080/7 M/P06 PVQM/8080/ PVQ/8080/ 00 PVQ/800/7 M/P06 PVQM/8080/ PVQ/800/ Connectors Service kit Plug with cable gland Plug with molded cable Magnetically operated switches Service kit V007-D00 V00-D0 (ED and VDR, cable length m) V00-D (ED and VDR) V00-D0 (ED and varistor, cable length m) 5 Pages & Cyl. Ø PRQ/860/00 0 PRQ/8600/00 50 PRQ/86050/00 6 PRQ/8606/00 80 PRQ/86080/00 00 PRQ/8600/00 7/8 without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH en

6 PR/86000/M, IVC Industrial cylinder Dimensions ø , 9,5,5 G 6,5 6 8 KW,5 ø e MM h 9 KK RT ø e E E RT E E KV SW G G H R EE 8 P P ø 80 & 00 VD G P 9 G P V 7 X M WH ø... 6 ø 80 & # - - ø... 6 ø 80 & 00 RT RT H # Stroke Cushion adjustment front end cover Main valve 5 Pilot block 6 Output ports (&) 9 7 ir supply G 8 Exhaust position, do not obstruct 9 Without function - do not use Manual override Speed control adjustment G Cushion adjustment rear end cover 5 M/50 switches can be mounted flush with the profile ttention: Reed switches for Ø mm useable only Ø M Ø Ø G H E E E E EE G G G KK KW 8 9 e e ,5 G/8 59 0,5 M0x,5 5 68,5 0 9, ,5 G/8 59 0,5 Mx,5 6 68,5 05 6, , G/8 6,5 M6x,5 8 9, , ,5 5,5 G/ M6x,5 8 9, , G/ 9 7,5 6,5 M0x, , G/8,5 8 5 M0x,5 0, Ø Ø MM P P P R RT V VD WH X KV SW at 0 per 5 Model h9 mm mm 7 0,5,5 M ,66 kg 0,07 kg PR/860/MI+//* ,5 8 M 6, ,0 kg 0, kg PR/8600/MI+//* ,5 6,5 M 8,5 6 7,5 7 5,58 kg 0,8 kg PR/86050/MI+//* 6 0 9,5,5 6 56,5 M , kg 0,9 kg PR/8606/MI+//* ,5 6 7 M , kg 0,9 kg PR/86080/MI+//* ,5 8,5 89 M , , kg 0,5 kg PR/8600/MI+//* * Please insert standard stroke length + Please insert valve function en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

7 PR/86000/M, IVC Industrial cylinder P./86000/MG.//.; Cylinder with piston rod bellow ø Cyl. Ø Ø Stroke max per bellow Piston rod extention for first bellow for further bellows Model P#/860/MG+//* P#/8600/MG+//* P#/86050/MG+//* P#/8606/MG+//* P#/86080/MG+//* P#/8600/MG+//* * stroke length # Piston rod material + Valve function 7/8 without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH en

8 PR/86000/M, IVC Industrial cylinder Mountings Front or rear stud mounting Conforms to ISO 555, type MX Piston rod swivel K DD TG TG KK KK Ø DD TG kg Model () /0 7 M6,5/8 0,0 QM/80/5 50/6 M8 6,5/56,5 0,05 QM/8050/5 80/00 8 M0 7/89 0,08 QM/8080/5 Front flange, G Conforms to ISO 555, type MF and MF Ø KK F kg Model (K) M0x, ,0 QM/805/8 0 Mx, ,0 QM/800/8 50/6 M6x, ,65 QM/8050/8 80/00 M0x, ,7 QM/8080/8 Foot mounting C Conforms to ISO 555, type MS F MF UF TF F T E R H U O ø TR E Ø E Ø F MF R TF UF kg Model (, G) ,5 Q/80/ ,5 Q/800/ ,70 Q/8050/ ,80 Q/806/ ,5 Q/8080/ ,0 Q/800/ ,5 PVQ/80/ ,5 PVQ/800/ ,7 PVQ/8050/ ,8 PVQ/806/ ,5 PVQ/8080/ , PVQ/800/ Ø Ø H O T U E TR kg Model (C) ,5 Q/80/ ,8 Q/800/ ,0 Q/8050/ ,9 Q/806/ ,80 Q/8080/ ,95 Q/800/ en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

9 PR/86000/M, IVC Industrial cylinder Rear clevis D Conforms to ISO 555, type MP Rear clevis D Conforms to ISO 555, type 6 H U C H F CP CG H FM SR EK e 8 R JK h 9 MR Ø C H Ø EK e8 F H MR U kg Model (D) , Q/80/ ,6 Q/800/ , Q/8050/ , Q/806/ ,5 Q/8080/ ,90 Q/800/ , PVQ/80/ ,6 PVQ/800/ , PVQ/8050/ , PVQ/806/ ,5 PVQ/8080/ ,9 PVQ/800/ Ø H Ø EK h9 F R R kg Model (D), 0 7 0,0 Q/80/ 0 6 0, 5 0 0, Q/800/ 50 5, 6 7,5 0,6 Q/8050/ 6 5, ,55 Q/806/ , ,90 Q/8080/ , 0,5 Q/800/ Piston rod clevis F Conforms to DIN ISO 80 Front or rear detachable trunnion FH Conforms to VDM 56 part, type MT 5/6 C CE E KK RK C CM ø CK h UW TD e 9 R ER T D H TM h Ø KK CE Ø CKh C CM ER E RK kg Model (F) M0x, ,09 QM/805/5 0 Mx, , QM/800/5 50/6 M6x, ,5 0, QM/8050/5 80/00 M0x, ,67 QM/8080/5 M0x, ,09 PVQM/80/5 0 Mx, , PVQM/800/5 50/6 M6x, ,5 0, PVQM/8050/5 80/00 M0x, ,67 PVQM/8080/5 Ø Ø D h R Ø TD e9 T TM h UW kg Model (FH) ,0 Q/80/ 0 5 0, ,8 Q/800/ 50 0, ,60 Q/8050/ 6 5, ,0 Q/806/ , ,90 Q/8080/ ,50 Q/800/ 7/8 without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH en

10 PR/86000/M, IVC Industrial cylinder Rear eye R Conforms to ISO 555, type MP Trunnion support S Conforms to ISO 555, type T F EW ø D CD H 9 T H H7 ø D F x 5 Ø Ø CD H9 EW F MR kg Model (R) 0 5,8 9 0,09 Q/80/7 0 7, , Q/800/7 50, ,7 Q/8050/ ,7 5 0, Q/806/ , ,7 Q/8080/ , ,59 Q/800/7 0 5,8 9 0,09 PVQ/80/7 0 7, , PVQ/800/7 50, ,7 PVQ/8050/ ,7 5 0, PVQ/806/ , ,7 PVQ/8080/ , ,59 PVQ/800/7 Ø C Ø Ø Ø F x H T kg Model DH7 D D 5 (S) 6 8 0,5 6, ,8 0,0 Q/80/ 0/ , , Q/800/ 6/ , ,8 Q/806/ , , Q/800/ Wide hinge SW Conforms to ISO 555, type 7 ø CK H 9 EM R G ø E PH H MR ø D C Universal piston rod eye UF Conforms to DIN ISO 89 CN H 7 CE EN h KK Z Z ER E Ø Thread X CE Ø EN ER E Z kg Model (UF) KK CN H7-0, M0x, ,09 QM/805/ 0 Mx, , QM/800/ 50/6 M6x, , QM/8050/ 80/00 M0x, ,67 QM/8080/ M0x, ,09 PVQM/805/ 0 Mx, , PVQM/800/ 50/6 M6x, , PVQM/8050/ 80/00 M0x, , PVQM/8080/ EP ø H TE U R UR Ø C Ø CKH9 Ø D H EM G G G K K R Ø S kg Model (SW) 0 7 5, ,6 0 6,6 0,05 M/P ,5 5 5,6 6,6 0,07 M/P , ,6 9 0, M/P , , ,8 M/P , ,5 5 0,8 M/P , ,5 9 0, M/P , ,6 0 6,6 0,05 M/P ,5 5 5,6 6,6 0,07 M/P , ,6 9 0, M/P , , ,8 M/P , ,5 5 0,8 M/P , ,5 9 0, M/P06 T en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

11 PR/86000/M, IVC Industrial cylinder Universal rear eye UR Conforms to ISO 555, type MP6 Narrow hinge SS EX D CX H 7 ø CK G 7 EM R G Z Z R ø E PH MS T Ø Ø CN H7 EN ER F R Z kg Model (UR) 0 6,5 0,5 Q/80/ ,5 Q/800/ ,0 Q/8050/ ,55 Q/806/ ,90 Q/8080/ ,50 Q/800/ 0 6,5 0,5 PVQ/80/ ,5 PVQ/800/ , PVQ/8050/ ,55 PVQ/806/ ,9 PVQ/8080/ ,5 PVQ/800/ ø H TE U R UR Ø C Ø CNG7 Ø D H EM G G G K K R Ø S kg Model (SS) ,6 0 6,6 0,5 M/P ,6 6,6 0,0 M/P ,6 9 0,8 M/P , ,50 M/P ,5 5 0,75 M/P ,5 9,0 M/P996 Swivel hinge US Conforms to VDM 56 part EN -0, ø CN H 7 EU Z ER G ø D Z 5 H6 CH ø S5 G K G K Ø CH Ø CN H7 ØD EN -0, ER EU G G G H K K Ø S Z kg Model (US) 0 6 0, ,6 6,6 0,9 M/P ,6 6,6 0, M/P ,6 9 0,6 M/P , ,59 M/P ,5 5,0 M/P ,5 5,0 M/P05 7/8 without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH en.5.50.

12 PR/86000/M, IVC Industrial cylinder Technical data - Reed switches - additional informations see data sheet N/en..005 Symbol Voltage Current maximum Function Temperature ED Protection class Plug Cable length Cable type Weight Model (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + N Closer IP66, 5 or 0 PVC x 0,5 7 M/50/SU/*V Closer IP66 5 PUR x 0,5 7 M/50/SU/5U ~ U Closer IP66 Silicon x 0,5 7 TM/50/RU/S N U K U N + N ~ Changeover IP66 5 PVC x 0,5 7 M/50/RC/5V Closer IP66 M8 x 0, PVC x 0,5 6 M/50/SU/CP *) ~ K * Insert cable length; *) Plug-in connector see page ; Color code: K = black, N = brown, U = blue Drawings M/50/SU/*V, M/50/SU/5U, TM/50/RU/S Cable length =, 5 or 0 m - 5, M/50/RC/5V Cable length = 5 m 5, ø 6, ø 6,, ,5 M/50/SU/CP - 5, 0 00 ±5, X K ø 6,,5 X N U Fixing screw + N = brown; - U = blue (output) - K = black; + N = brown; - U = blue Plug M8 x, color code: K = black; N = brown; U = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0, 5 m 0, M x M/P59/5 en without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8

13 PR/86000/M, IVC Industrial cylinder Technical data - Solid state - additional informations see data sheet N/en..007 Symbol pnp + N U K Voltage (V d.c.) Current maximum (m) Function Temperature ( C) ED Protection class Plug Cable length (m) Cable type Weight (g) Model PNP IP67, 5 or 0 PVC x 0, 7 M/50/EP/*V PNP IP68 5 PUR x 0, 7 M/50/EP/5U pnp npn npn + N U K U + N K + U N K PNP IP67 M8 x 0, PVC x 0, 6 M/50/EP/CP *) PNP IP67 M x 0, PVC x 0, 6 M/50/EP/CC *) NPN IP67, 5 or 0 PVC x 0, 7 M/50/EN/*V Closer IP67 M8 x 0, PVC x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: K = black, N = brown, U = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length =, 5 or 0 m - 5, 0 +0 ± ø 6,,5 M/50/EP/CP, M/50/EN/CP - 5, 0 00 ±5, X K ø 6,,5 X N U M/50/EP/CC - 5, 0 7,5 00 ±5 X K U ø 6,,5 X N Fixing screw Color code: K = black; N = brown; U = blue Plug M8 x Plug M x Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. (0 - f) 05 Norgren GmbH 7/8 Diese Produkte sind ausschließlich in Druckluftsystemen zu verwenden. Sie sind dort einzusetzen, wo die unter en systemen verwendete Komponenten auf verschiedene rten versagen. Systemauslegern wird dringend empfohlen, die Störungsarten aller