Cable accessories for shipbuilding and off-shore units

Size: px

Start display at page:

Download "Cable accessories for shipbuilding and off-shore units"

Shana Hunt
6 years ago
Views:

1 Cable accessories for shipbuilding and off-shore units The security on ships and off-shore units demand for high reliability. Therefore, Cellpack presents system solutions for all kind of electrical cables. The system for superior security D

2 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SMH Heat-shrinkable straight-through joint for unarmoured polymeric cables and conductors SMHC Heat-shrinkable straight-through joint for polymeric cable with concentric conductor Universal applications to connect low voltage plastic insulated cables or conductors insulated with PVC, PE and XPE, for example MGG, MSK(H), MPRX. Suitable for compression connectors on aluminium and copper conductors. 1 Universal applications to connect low voltage plastic insulated cables or conductors insulated with concentric conductor and PVC, PE and XPE (e.g. MGCG, MSK(H)C, K1XCX, MPRXCX). 1 Compact dimensions Wide conductor and cross-section range Resistant to alkaline earth elements Transversely waterproof High electrical insulating values High mechanical strength Outdoor Underground Water Installation ducts Ductwork Areas with increased fire safety requirements Outer sleeve Inner sleeves Connectors not included CENEEC HD 623 (VDE 0278 part 623) Storage conditions/shelf life Unlimited shelf life High electrical insulating values Transversely waterproof Halogen-free High mechanical strength Resistant to alkaline earth elements Wide conductor and cross-section range Compact dimensions Unlimited shelf life Outdoor Underground Water Installation ducts Ductwork Areas with increased fire safety requirements Outer sleeve Inner jacket sleeve Inner sleeves Copper braid tape Connectors not included Storage conditions/shelf life Unlimited shelf life ) 0.6/1 (1.2) kv SMH3/4 Nominal cross section per conductor Polymeric cable ² 3x 4x R/G-BV R/G-BV R/G-BV R/G-BV Appropriate connectors must be ordered separately. Nominal cross section per conductor ² 1 ) 0.6/1 (1.2) kv R/G 1.5/1.5 4/4 1.5/1.5 4/ SMHC3/ R/G 6/6 16/16 6/6 16/ R/G 25/25 35/35 25/25 35/ R/G 50/50 150/150 50/50 150/ Appropriate connectors must be ordered separately. Shipbuilding license, Det Norske Veritas, V-Furnitures, Certificate-No. E-9379 Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/20024 Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA Shipbuilding license, Det Norske Veritas, V-Furnitures, Certificate-No. E-9379 Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/

3 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SMHV Heat-shrinkable straight-through joint for control cable and signal cable SMHF... R/G Heat-shrinkable straight-through joint for unarmoured polymeric cables and conductors, flame-retardant Universal applications to connect control cables and signal cables (e.g.: MGCG, MSK(H)C, K1KCX, MPRXCX). Universal applications to connect control cables and signal cables (e.g.: FMGCG, FMK(H)Ce, MPRXCX). Compact dimensions Resistant to alkaline earth elements Transversely waterproof High electrical insulating values High mechanical strength Outdoor Underground Water Installation ducts Ductwork Areas with increased fire safety requirements Outer sleeve Inner jacket sleeve Inner sleeves Copper braid tube Pressure springs Compact dimensions Resistant to alkaline earth elements Waterproof and moisture-resistant High electrical insulating values Outdoor Underground Water Installation ducts Ductwork Areas with increased fire safety requirements Storage conditions/shelf life Unlimited shelf life ) 0.6/1 (1.2) kv SMHV Number of conductors Control and signal cable 1.5 ² 2.5 ² Nominal cross section ² 1 5/10 1,5-2,5 R/G / R/G / R/G / R/G SMHF Number of twisted pairs Control and signal cable d = 0.8 Number of conductors Control and signal cable 0.75 ² 1 R/G R/G R/G Conductor connectors and branching assembly kits must be ordered separately. Separate MSFA assembly kit required for each branch. Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/20024 Shipbuilding license, Det Norske Veritas, V-Furnitures, Certificate-No. E-9379 Shipbuilding license, Det Norske Veritas, V-Furnitures, Certificate-No. E-9379 Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/20024 Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA

Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SRUM Medium wall heat shrink tubing self-extinguishing, flexible, shrinkage ratio 3:1 or 4:1 SRFH2 Medium wall heat shrink tubing

4 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SRUM Medium wall heat shrink tubing self-extinguishing, flexible, shrinkage ratio 3:1 or 4:1 SRFH2 Medium wall heat shrink tubing self-extinguishing, shrinkage ratio 3:1, with or without hot melting adhesive Medium-walled With hot melt adhesive Easy to mark Non-corrosive Infusible High flexibility Superior electrical properties High tensile strength Resistant to cold flow (thermally stable) Self-extinguishing Insulating Bundling Marking Corrosion protection Mechanical protection Material Cross-linked polyolefin Free of lead and cadmium Corresponds to MI-I-23053/4 Colour(s) black Medium-walled Easy to mark Non-corrosive Infusible Superior electrical properties High tensile strength Resistant to cold flow (thermally stable) Self-extinguishing Insulating Protection against moisture and pressure Particularly suitable for heat-shrink joints and terminations used in shipbuilding Material Cross-linked polyolefin Free of lead and cadmium Colour(s) black Recovered wall thickness of tube Recovered adhesive wall thickness before shrinkage Internal diameter D after shrinkage A standard roll may include sections which have been tied together. Also available in 1000 lengths. Other lengths available to order. m with adhesive, 1m pieces, shrink ratio 3: SRUM Other lengths available to order. m before shrinkage Internal diameter D after shrinkage Recovered wall thickness without adhesive, 1m pieces, authorisation for shipbuilding SRF with adhesive, 1m pieces, authorisation for shipbuilding SRFH Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA Shipbuilding license, Det Norske Veritas, V-Tubes, Certificate-No. E-9378 Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/

Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SRF3, SRFH3 Thick wall heat-shrink tubing self-extinguishing, shrinkage ratio 3:1, with or without hot melting adhesive CHE-I Single-core indoor

5 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 SRF3, SRFH3 Thick wall heat-shrink tubing self-extinguishing, shrinkage ratio 3:1, with or without hot melting adhesive CHE-I Single-core indoor termination for all polymeric single-core cables CHE-I terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). = ength Thick-walled Easy to mark Non-corrosive Infusible Superior electrical properties High tensile strength Resistant to cold flow (thermally stable) Self-extinguishing Insulating Protection against moisture and pressure Particularly suitable for heat-shrink joints and terminations used in shipbuilding Material Cross-linked polyolefin Free of lead and cadmium Colour(s) black Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Compatible with all cable lugs Quick, safe and easy assembly Ready for iediate operation Cable lugs not included Each unit contains materials for one set of three terminations. Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds 1 Set for 3 phases CENEEC HD (DIN VDE 0278, part 629-1) Other lengths available to order. before shrinkage Internal diameter D after shrinkage Recovered wall thickness m without adhesive, 1m pieces, authorisation for shipbuilding SRF with adhesive, 1m pieces, authorisation for shipbuilding SRFH insulated diameter after removal of the outer conducting layer Number of sheds per phase Ø S Nominal cross section ² CHE-I , CHE-I 17kV , Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. Shipbuilding license, American Bureau of Shipping, V-Tubes/Furnitures, Certificate-No. 07-HG PDA Shipbuilding license, Det Norske Veritas, V-Tubes, Certificate-No. E-9378 Shipbuilding license, Germanischer lyod, V-Furnitures, Certificate-No HH Shipbuilding license, loyd s Register, V-Tubes/Furnitures, Certificate-No. 96/20024 Shipbuilding license, American Bureau of Shipping, MV-Terminations, Certificate-No. 07-HG PDA Shipbuilding license, Det Norske Veritas, MV-Terminations, Certificate-No. E-9380 Shipbuilding license, Germanischer lyod, MV-Terminations, Certificate-No HH Shipbuilding license, loyd s Register, MV-Terminations, Certificate-No. 03/

6 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 CAE-I Single-core indoor termination for all polymeric single-core cables CHE-3I(A) Three-core indoor termination for all 3-core polymeric cables CAE-I terminations are suitable for all single-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (wire or tape screen). Suitable for compression cable lugs. = ength CHE-3I(A) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). = ength Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Compression cable lugs not included 3 one-piece slip-on silicone terminations with integrated stress control element CENEEC HD (DIN VDE 0278, part 629-1) Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Quick, safe and easy assembly Ready for iediate operation Cable lugs not included Tracking-resistant heat-shrink tubing Heat-shrink tube Silicone stress-control elements Silicone sheds Pressure spring Silicone stress control element Assembly accessories CENEEC HD (DIN VDE 0278, part 629-1) insulated diameter after removal of the outer conducting layer Appropriate cable lugs must be ordered separately. Accessories for cables with tape screen must be ordered separately. Number of sheds per phase Ø S Nominal cross section ² CAE-I CAE-I 17kV insulated diameter after removal of the outer conducting layer Number of sheds per phase CHE-3I(A) CHE-3I(A) 17kV Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen and armouring must be ordered separately. Ø S Nominal cross section ² Shipbuilding license, American Bureau of Shipping, MV-Terminations, Certificate-No. 07-HG PDA Shipbuilding license, Det Norske Veritas, MV-Terminations, Certificate-No. E-9380 Shipbuilding license, Germanischer lyod, MV-Terminations, Certificate-No HH Shipbuilding license, loyd s Register, MV-Terminations, Certificate-No. 03/

7 Catalogue ow Voltage 2008 Catalogue ow Voltage 2008 CHE-3I(B) Three-core indoor termination for all 3-core polymeric cables CAE-3I Three-core indoor termination for all 3-core polymeric cables CHE-3I(B) terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphite-coated or strippable) and screening (copper wire or tape). = ength CAE-3I terminations are suitable for all three-core plastic-insulated cables (PVC, PE, XPE, EPR) with different types of semi-conducting layers (graphitecoated or strippable) and screening (wire or tape screen). = ength Flexible silicone stress control elements ensure reliable stress control under all operating conditions Combination of slip-on and heat-shrink components Quick, safe and easy assembly Ready for iediate operation Cable lugs not included Tracking resistant spreader cap Tracking-resistant heat-shrink tubing Silicone stress-control elements Silicone sheds Pressure spring Assembly accessories CENEEC HD (DIN VDE 0278, part 629-1) Silicone slip-on components for quick, safe and easy assembly Ready for iediate operation Compression cable lugs not included 3 one-piece slip-on silicone terminations with integrated stress control element Silicone tube Silicone cold-shrink spreader cap Assembly accessories CHE-3I(B) CHE-3I(B) 17kV insulated diameter after removal of the outer conducting layer Appropriate cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. Nominal cross section ² insulated diameter after removal of the outer conducting layer Number of sheds per phase Appropriate compression cable lugs must be ordered separately. EGA earthing kit for cables with tape screen must be ordered separately. Ø S Nominal cross section ² CAE-3I CAE-3I 17kV Shipbuilding license, Det Norske Veritas, MV-Terminations, Certificate-No. E-9380 Shipbuilding license, Germanischer lyod, MV-Terminations, Certificate-No HH Shipbuilding license, loyd s Register, MV-Terminations, Certificate-No. 03/20066 Shipbuilding license, American Bureau of Shipping, MV-Terminations, Certificate-No. 07-HG PDA

WEST Cellpack AG Electrical Products Anglikerstrasse 99 5612 Villmergen Schweiz Tel. +41 (0) 56 618 12 34 Fax +41 (0) 56 618 12 45 verkauf.ep@cellpack.

8 WEST Cellpack AG Electrical Products Anglikerstrasse Villmergen Schweiz Tel. +41 (0) Fax +41 (0) Cellpack GmbH Carl-Zeiss-Straße Waldshut-Tiengen Deutschland Tel Fax Cellpack Benelux B.V. Keersluisweg EE Almere Buiten Nederland Tel. +31 (0) Fax +31 (0) EAST Cellpack Polska Sp. z o.o. ul Bokserska 64, Warszawa Polska Tel Fax biuro@cellpack.pl ASIA Cellpack Far East (PTE) TD. 128 Joo Seng Road # Singapore Tel Fax info@cellpack.com.sg Behr Bircher Cellpack BBC Malaysia Sdn. Bhd. No. 8, Jalan TU 50 Taman Tasik Utama Ayer Keroh Melaka Malaysia Tel Fax info@cellpack.com.my Behr Bircher Cellpack Ibérica, S.A. C/.Mas Pujol, nr. 47 Nave 4 Pol. Ind. Sector V es Franqueses del Vàllès Barcelona España Tel Fax comercial@cellpackiberica.com Behr Bircher Cellpack BBC France s.à.r.l. 277, Boulevard des Technologies udres France Tel. +33.(0) Fax +33.(0) info@cellpack-ep.fr All about us:

Electrical Insulating Tapes

Electrical Insulating Tapes Energy, Mining, Industrial and Contractors applications LV and MV electrical jointing and termination applications Adhesive or Self-amalgamating UV resistant Cold and weather