CHINA INSPECTION SERVICE CO.,LTD
|
|
|
- Mildred Charlene Mitchell
- 5 years ago
- Views:
Transcription
1 Container Loading Supervision Report General Information: Report Number: CLS-PO Product name: Please see part 1 Product #: Please see part 1 PO# Ordered quantity: On-site weather: Client name: Supplier name: Inspection Date: Departure time to the factory: Arrival time: Departure time: Inspection location: 22644pcs Sunny Katrina trading Zhejiang DELAI company Jan :30AM 9:20AM 18:34PM Yunshan industrial zone, Wuyi city, Jinhua city, Zhejiang Province. China Inspection summary: Inspection Sections Conform? (Y / N) 1. Quantity & Assortment Y On-site Findings/Comments 2. Condition of container(s) Y 3. Condition of export cartons Y 4. Random quality spot-check Y 5. Shipping marks N Shipping mark doesn t match the client s requirement 6. Loading process Y 7. Container details Y Conclusion: FAIL CIS comments: 1. Barcode scan test: ok 2. Assembly test: ok 3. Rub test by wet cloth: ok 4. Factory s cooperative attitude is positive Manufacturer Signature: Ms,Wu CIS signature: Peter Liu info@china-inspection-service.com Page 1 of 17
2 1. Quantity & Assortment: Product # Product Description Quantity (Ordered) Cartons (Ordered) Cartons (Found) Weight / Carton Weight (Found) Tinfoil plate Swing Total: Condition of container(s): PASS: Dry and in good working condition, free from stains, bad odors, large dents or holes, suitable for loading the said cargo FAIL: Dirty, with stains, torn roof/side panels, broken hinges/handles or closure devices, etc. Other: Pictures: 3. Empty container Container No. 3. Condition of export cartons: PASS: Dry and in good working condition, free from serious damage, suitable for holding and protecting the said cargo, properly palletized FAIL: Crushed, with large holes, containing other serious damage, not suitable for holding and protecting the said cargo, improperly palletized Other: Pictures: Finished products in warehouse info@china-inspection-service.com Page 2 of 17
3 4. Random quality spot-check : # Checking item description Conform? (Y / N) 4.1 Randomly draw cartons and visually Y inspect the products inside them. Also inspect the function if possible and record down the findings On-site Findings/Comments No found major defect info@china-inspection-service.com Page 3 of 17
4 Pictures: Page 4 of 17
5 Page 5 of 17
6 Page 6 of 17
7 Page 7 of 17
8 61062 Page 8 of 17
9 Page 9 of 17
10 Page 10 of 17
11 Page 11 of 17
12 Page 12 of 17
13 5. Shipping marks # Checking item description Conform? (Y / N) 5.1 Check the shipping marks on cartons/inner N cartons. On-site Findings/Comments Doesn t match the client s requirement Pictures: Please see part 4 for reference 6. Loading process: # Checking item description Conform? On-site Findings/Comments (Y / N) 4.1 Record the loading process with photos Y (Also include the information of weather and the condition of loading locations) info@china-inspection-service.com Page 13 of 17
14 Pictures: Weather: sunny Loading location: Yiwu city, Zhejiang Province Start loading ¼ loading 2/4 loading ¾ loading Page 14 of 17
15 Full loading Close left doors and open right doors Close the container doors Seal the container: Seal No. Container load plan Page 15 of 17
16 7. Container details Container Type Container No. Seal No. Shipping Co. s Seal No. Truck No. 40HQ CAXU OOL CEW4907 OOL CEW4907 浙 LA2892 Pictures: Container weight: G.W.: 20100KG TARE WEIGHT: 14700KG N.W.: 5400KG info@china-inspection-service.com Page 16 of 17
17 Other related pictures: Factory gate Warehouse Workshop: Page 17 of 17
CHINA INSPECTION SERVICE CO.,LTD
Container Loading Supervision Report General Information: Report Number: CLS-PO101392 Product name: Please see part 1 Product #: Please see part 1 PO# 32145678 Ordered quantity: On-site weather: Client
Container Loading Supervision(CLS) N-us2-170502.1 1. GENERAL INFORMATION Client name : * Product Description: Denim display tables Style number : * Supplier name: * Loading location: Ningbo, China Date
CHINA INSPECTION SERVICE CO.,LTD
In-Production Inspection Report General Information: Report Number: Product name: Item #: PO# IPI-CIS15111001 Aqua Beat XXXX N/A Ordered quantity: Please see part 1 Client name: Supplier name: Inspection
Pre-shipment Inspection Report
Pre-shipment Inspection Report Report #: PSI20180123-180117-A General Information: Client name Product name XXX Chairs Item / PO# 3971 Ordered quantity(lot size) 777pcs Inspection Date 2018/01/23 Arrival
Inspection Report(CLC)
Inspection Report(CLC) PRODUCT DESCRIPTION O-cn-0915056 (Re-Inspection after O-cn-0914894 performed on 01-14-2012) Product Name: Steel Metal Desk Inspection location: TianJin, China Inspection date: 12-31-2011
CHINA INSPECTION SERVICE CO.,LTD
Pre-shipment Inspection Report General Information: Report Number: N/A Product name: Wall clock Item #: 170092070# PO# 36006678# Ordered quantity: 900PCS Client name: N/A Supplier name: Zhangzhou XXXX
INSPECTION REPORT
INSPECTION REPORT 14-4240 CONSIGNMENT DESIGTED AS: GOOD DESCRIBED AS GOODS DESCRIBED AS PER INVOICE COPY DECLARED QUANTITY OFFERED QUANTITY CONSIGNEE EXPORTER / SELLER INVOICE NO. & DATE: L/C NO. & DATE:
: Final Random Inspection
Final Random Inspection Report Report No.: FCT-JY****** INSPECTION INFORMATION Client : *********************** Attn : *********************** Supplier : *********************** Factory : ***********************
Pre-shipment Inspection Report DOCUMENT #:AQI-DOC-PSI REPORT
Report #: PSI20180515-180506-B General Information: Client name Product name Item PO# Ordered quantity XXX 6 ports USB Charging Station XXX N/A 2500Pcs Inspection Date 2018/5/15 Arrival time Departure
CHINA INSPECTION SERVICE CO.,LTD
Factory Audit Report 1. Factory Profile: General Information: Factory name: Website: Address: CHINA INSPECTION SERVICE Qing Xiu embroidery factory N/A Guang Zhou, Guang Dong province Date of the factory
INSPECTION REPORT. Beyond AQL FAILED I. GENERAL INFORMATION II. INSPECTION SUMMARY III. REMARKS. Client: XXX Conclusion Report Date: 3 July 2012
Form No.: VTR-QR-CZ-RF-015 V1.1 Page 1 of 19 I. GENERAL INFORMATION Service Performed: Client: Supplier: Factory: Product Name: During Production Inspection XXX XXX XXX P.O. No.: 2472 Item No.: 324363
PRODUCTION MONITORING INSPECTION REPORT
PRODUCTION MONITORING INSPECTION REPORT Conducted by Jacky Supplier: Product: XXXXXXXXXX Co., Ltd IQF Strawberry Inspection location: XXXX city, XXXXX Province Inspection date: XXXXXXXXXXXX Production
PRODUCTION MONITORING INSPECTION REPORT
PRODUCTION MONITORING INSPECTION REPORT Conducted by Jacky Supplier: Product: XXXXXXXXXX Co., Ltd IQF Strawberry Inspection location: XXXX city, XXXXX Province Inspection date: XXXXXXXXXXXX Production
Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x
![Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x](/thumbs/83/87523087.jpg "Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x")
Inspection Report SIMPLIFY130206 FRI (Final random inspection) PSI (Pre-Shipment inspection) DUPRO (During Production Inspection) Loading Supervision Sample Pickup Re-inspection (previous report nº): Amendment:
FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X X 68, 118 width
Date: Report Number: Page 1 of 5 FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X 30 76 X 68, 118 width Style/Code: 30 X 30 76 X 68, 118 Order
REPORT NUMBER. Inspector / Reviewer INSPECTION DATE
! Mis-Inspection INSPECTION REPORT CLIENT Example Company REPORT NUMBER XXX9E ATTENTION PAGE OF TITLE FAX NUMBER Quality Manager Inspector / Reviewer QC Engineer Technical Supervisor CC TO TITLE FAX NUMBER
Supplier cooperation Supplier organization Inspector s opinion on the factory Average Average Average
Pre-Shipment Inspection(PSI) N-mx5-170512.1 PRODUCT INFORMATION Client name: * Product name: Girls fleece lined tights Style number : * Inspection location: YiWu, Zhejiang Inspection date: May.12th, 2017
Inspection Report(IPC)
Inspection Report(IPC) PRODUCT DESCRIPTION O-cn-0934710 Client Name: ABC Clothing Company Product Name: Officer Hat Inspection location: Tianjin Inspection date: 12/31/2011 Your reference number: 12345
ASIA TEXTILE INSPECTIONS LTD 2010 Kowloon Plaza 485 Castle Peak Road - HONG KONG Tel
Date: Report Number: Page 1 of 4 FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: 100% Polyester Satin, Confetti Print Style/Code: 100% Polyester Satin, Confetti
In-Process Inspection
Report No. : xxxxxxxxxxxxxxxx Re - Inspection Product : Knitten Gloves P/O No. : / Part.-No. : / Client : xxxxxxxxxxxxxxxx Order-Qty : 15,000 pairs Supplier : xxxxxxxxxxxxxxxx Participants Supplier : Mr.
eparture time from home / office Arrival Time at the Factory Departure Time from the Factory 7:00 10:30 17:00
PRODUCT DESCRIPTION Product Name: 12621 Russell Hobbs Smoothie Maker Inspection location: Dongguan Inspection date: 2007/11/9 P/O number: Item number: Supplier: Tai Yu (Dongguan) Order quantity: No. of
AQM Guideline Myanmar
AQM Guideline Myanmar Procedure 1 History of revisions Date Scope of revision Page 3.1 8/11/2017 Creation whole 3.2 8/12/2017 AQM application form with survey 12 3.3 11/04/2018 AQM address 4 2 Summary...
INSPECTION REPORT Report No.: NKGWT To : NANJING EFG CO.,LTD Date: 27-Dec-2010 Att : Kelven From : Mike Wang
SGS-CSTC Nanjing Branch 19/F,Ruihua Building, No.315, Zhongshan South Road, Nanjing.Jiangsu Province, China P.C:210001 Tel:86 025 83466455 Fax:86 025 83466107 INSPECTION REPORT Report No.: NKGWT00047939
SCOPE OF WORK FOR QUALITY and QUANTITY INSPECTION of FOODS
Fighting Hunger Worldwide SCOPE OF WORK FOR QUALITY and QUANTITY INSPECTION of FOODS Developed: Van Hoan NGUYEN, OSCQ Changes: - Changes in formatting - Including General Terms of food contracts (page
A. INSPECTION RESULT SUMMARY (Details can be referred to corresponding sections in this report)
GENERAL INFORMATION: Page 1 of 28 Client : Anonymous Clients Attn : Mr.XX Supplier/Vendor : Anonymous supplier Order Quantity : 1,850 + 1,850 = 3,750 pieces Factory Name : Anonymous factory Shipped Quantity
PL Full Solution
5.9.2011 3 PL Full Solution Headline 3PL Work Flow Factory A Purchase Order Factory B Factory C Customs Declaration Sorting, simple assembly, pick and pack, cargo consolidation, order fulfillment Export
Inspection Report(PSI)
Inspection Report(PSI) O-cn-1205880_1 PRODUCT DESCRIPTION Client Name: Product Name: Brand name P/O number: Inspection date: Expected shipment date: Factory: Anonymous Company BROCCOLI XXXX XXXX 01/Mar/2012
GFI INSPECTION COMPANY
COMPANY PROFILE Golden fairness commodity inspection service co.,ltd(for short: GFI inspection), is an independent & professional 3rd-party quality control service provider in Ningbo city, which is in
Procedures for Magaya WMS users
Procedures for Magaya WMS users This document proposes simple procedures to start using the Magaya WMS. Receiving This is the most important part of the whole process. If this step goes wrong the system
BV PROPRIETARY SAMPLE DOCUMENT INSPECTION REPORT A. GENERAL B. INSPECTION OVERALL RESULT SUMMARY C. REMARKS
Inspection No.: 10123 Report Date: Sep 9, 2013 Page 1 of 9 A. GENERAL Vendor/Supplier Name: YZ Int'l Ltd Factory Name: OPQ Knitting Factory Product Description: Men Sweater Approved Sample: YES NO Product
REPORT NUMBER. Inspector / Reviewer INSPECTION DATE VENDOR MANUFACTURER INSP LOCATION
Mis-Inspection INSPECTION REPORT CLIENT Example Company REPORT NUMBER 7E ATTENTION PAGE OF TITLE Quality Manager Inspector / Reviewer QC Engineer Technical Supervisor FA NUMBER CC TO TITLE FA NUMBER SERVICE
FINAL RANDOM INSPECTION(FRI)
FINAL RANDOM INSPECTION(FRI) OR PRE-SHIPMENT INSPECTION(PSI) What is Final Random Inspection (FRI)? Here in this presentation, We explained about FRI briefly. CONTENT BACKGROUND QUALITY RISK / CHALLENGE
Factory Audit Report
Factory Audit Report Client XXXXX AI Service O-cn-0711111 Supplier XXXXX Co.Ltd. Auditor Billy XXXX Factory XXXXX Co.Ltd. Audit Date 2009-01-10 General Overview of the Audit s findings Fields Score / 5
Supplier International Shipping Instructions
1 1.0 Purpose The defines the steps to ensure the timely moving of goods to ABG or Amway location 2.0 Scope The procedure applies to all ABG paid international shipments from a supplier to an ABG or Amway
Pre-Shipment Inspection
Pre-Shipment Inspection This PPAI product including images, format, and text (the content ) are protected by applicable copyright and trademark laws and are owned either by PPAI or by third parties who
GFS RECEIVING REQUIREMENTS. Doc. Number: SOP0500 Revision No: 23 Page 1 of 5 Created: Reviewed: Revised: Effective:
Doc. Number: SOP0500 Revision No: 23 Page 1 of 5 PURPOSE: To define requirements for receiving products in GFS Distribution Centers. This applies to full and less-than-load (LTL) deliveries. SCOPE: This
Inspection Report(PSI)
Inspection Report(PSI) O-cn-1140491 R-us3-119023,R-us3-118920,R-us3-118781 PRODUCT DESCRIPTION Client Name: Product Name: Inspection location: Anonymous Company Jacket - 1234 (AB11) JinJiang Inspection
Factory Audit Report
Factory Audit Report 1997-2014 AsiaInspection Limited. All rights reserved Client Anonymous Client AI Service No R-us3-142702 Supplier Shenzhen Yes-Hope Auditor Rick Guo Factory Shenzhen Kingda Co., Ltd.
: STYLE : FAMX FMR SHAWL COLLAR COAT. COLOUR : Natural SIZE : XS, S, M, L, XL, 2X & 3X
INSPECTION REPORT FOR QVC UK (GMT) TO : QVC The Shopping Channel REPORT # : SHIJ124017 ATTN : QVC THE SHOPPING CHANNEL - LONDON - CLAIRE SADLER/JAY JOB # : -- C.C. : TIGER J SHANGHAI REP OFFICE - GANJIE/NICKY
Appendix 5: Location specific Shipping Instructions. Applicable to Tianjin site/ division I. Edition: Nov 09, 2017
Applicable to Tianjin site/ division I 1. Documentation required for incoming goods All documents (delivery note in duplicate, load carrier accompanying note, etc.) to be attached to the consignment note
Renting a shipping container..?? Read this check list..
Renting a shipping container..?? Read this check list.. Looking for a shipping container for hire in Adelaide..?? Look no further.. Port Container Services are a reliable shipping container supplier in
C-TPAT Information for Foreign Manufacturers & Suppliers
DISTRIBUTION SERVICES DEPARTMENT 1 Barnes & Noble Way, Monroe Township, NJ 08831 (732) 656-7400 C-TPAT Information for Foreign Manufacturers & Suppliers Foreign Manufacturers/Suppliers Recommendations
Inventory Tracking Solutions for Small Businesses
Inventory Tracking Solutions for Small Businesses Get in control of your inventory with Wasp Inventory Control the complete inventory tracking solution for small businesses. Wasp Inventory Control offers
Inventory Tracking Solutions for Small Businesses
Inventory Tracking Solutions for Small Businesses Get in control of your inventory with Wasp Inventory Control the complete inventory tracking solution for small business. Wasp Inventory Control offers
METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION)
Page 1 of 6 SECTION 05515 METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION) PART 1 - GENERAL 1.1 SECTION INCLUDES A. Specialty custom designed, spring assisted, self-closing LADDER SAFETY GATE (LSG) for
All vendors are required to comply with each section of the Vendor Standards Manual unless instructed otherwise by a FLE Purchase Order.
Contents Vendor compliance program... 1 Non-compliance charge back procedure... 2 FIR report... 3 Policies... 5 Over shipment policy... 5 Cancellation policy... 5 Right to reject non-conforming merchandise...
The Mentholatum Company A Rohto Company. International Inbound Route Guide
The Mentholatum Company A Rohto Company International Inbound Route Guide Table of Contents Updated 10/18/2014 1. General Instructions... 3 2. Consolidations and Less than Container loads... 6 3. Container
CRS CLAIMS and RECOVERY SERVICES
LAIMS and REOVERY SERVIES SURVEY REPORT NO. 17388/BOR DAMAGED ONSIGNMENT OF 15 PALLETS OF AUTOMOTIVE PARTS INSURANE POLIY NO. HQ-ME-0003780-00000-2017-05 addressee s ref.: 070/17/56459 SURVEY REPORT NO.
Purpose: Scope: Definitions:
Amendment 25/10/2006 Page 1 of 12 Purpose: The spirit of this document is one of continuous improvement to ensure product carried in reefer containers is handled correctly and will successfully be exported
The 0 Zone Quick Reference Guide
The 0 Zone Quick Reference Guide Orgill, Inc. All Rights Reserved Getting Started Search on Apple App store or Google Play for The O Zone application. Install it on your device then open the app and log
GM MOTORSPORTS RECEIVING INSTRUCTION
Page 1 of 5 1. Purpose and Scope To provide instruction to Warehouse Associates regarding how to properly manage the receiving of GM product. 2. Definitions GM Performance and Racing Receiving Log Dock
SECTION 15 CARTON REQUIREMENTS
SECTION 15 CARTON REQUIREMENTS CARTON REQUIRMENTS OVERVIEW 1. Carton Labels are required on all shipments from all vendors 2. We suggest as a best practice extra taping on your cartons. It guards against
Transnet IMO, SOLAS VGM Workshop
Transnet IMO, SOLAS VGM Workshop 3 rd June 2016 Fruit South Africa Implementation Case Study Mitchell Brooke So why the need to verify the gross mass of packed containers? Here s why! Example of fruit
FACTORY AUDIT REPORT (FA)
Form No.: FA_CFI_2013J_V1.0 Page 1 of 17 FACTORY AUDIT REPORT (FA) Client METAL DELS Booking No.: CFI-11031317 Supplier Hong Kong Steel Land.,Ltd Auditor Jack Chen Factory HUA DONG STEEL (GROUP) Audit
STANDARD TARIFF DCT GDANSK CONTAINER OPERATIONS
STANDARD TARIFF DCT GDANSK CONTAINER OPERATIONS Tariff valid from January 1 st, 2018 Definitions I. DCT the container terminal of DCT Gdansk S.A. II. Public Holidays Christmas Eve: Dec. 24 th from 3 p.m.,
LOW PROFILE FLOOR SCALE
π LOW PROFILE FLOOR SCALE 1-800-295-5510 uline.com SITE SELECTION Select a site for your new floor scale where it is least likely to be damaged by fork trucks and other material handling devices. Floor
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT BV Report No.:10120880436 Assessed Factory Name Assessed Factory Address City / Country Consigner of Assessment GS Supplier / Manufacturer
Logistics & Warehousing
Logistics & Warehousing Occupations included in this publication: Forklift Drivers Transport Services Managers (Transport Company Manager) Storepersons Supply and Distribution Managers Transport and Despatch
Northeast Supply Chain Conference 2007
Northeast Supply Chain Conference 2007 Using Tracking and Traceability Technology to Avoid Being Put Out of Business While Improving Operational Efficiency October 2, 2007 Peter Green, PH. D. BellHawk
Supplier Capability Assessment
SUPPLIER CAPABILITY ASSESSMENT General Details Factory Name Factory and Audit Location Yiwu RedCherry Jewelry Co Ltd Building #4, No. 755, Xuefeng West Road, Yiwu City, Zhejiang Province, China Audit date
CONSUMER GOODS USA. We make global trade flow smoother and safer
CONSUMER GOODS USA We make global trade flow smoother and safer Vision & Mission Our Vision» Be the best worldwide provider of trade facilitation and trade security services. Our Mission» Provide innovative
Applicable to Passau site/ division I
Applicable to Passau site/ division I Edition: July 2018 1. Documentation required for incoming goods All documents (delivery note in duplicate, load carrier accompanying note, etc.) to be attached to
eos LightPanel Systems User Guide
eos LightPanel Systems User Guide Read this manual before using eos LightPanel Products eos LightPanel Systems 5819 Uplander Way Culver City, CA 90230 P 310.616.5070 F 310.616.5056 info@lightwithart.com
Pre-Shipment Inspection Report
NO.: G001 Date:12 th Nov 2010 Inspector: Robin Page 1 of 8 EXECUTIVE SUMMARY AND INSPECTION STANDARD To: Attn.: Product Description: Vendor/Supplier: Factory Name: Factory Contact: Able doer corporation
Work Instructions / Delivery Regulations
Work Instructions / Delivery Regulations Delivery regulations for single conductors / wires / strands Contents 1. Target Purpose 2. Field of application 3. Delivery date and delay in delivery 4. Delivery
AQUA INTERNATIONAL LIMITED
INSPECTION REPORT Report No.: Date: 5-0346 8/9/0/APR/5 Customer : INNOVATIVE TECHNOLOGY P.O.No. : QVC PO#832063, IT PO#LT-Q-BR78.R2 (PI/IT5023 REV.4) Supplier: LEETAC Brand : IT Model No.: ITVS-200B Serial
Factory Fresh Freight: Criteria for Outgoing Shipments to Customers from IBM Manufacturing / Fulfillment Sites
Factory Fresh Freight: Criteria for Outgoing Shipments to Customers from IBM Manufacturing / Fulfillment Sites Bill Green STSM: Packaging Technology Bob Sanders STSM: Global Logistics Program Management
PRE-SHIPMENT INSPECTION REPORT (PSI)
General Information: SGR Inspection report: Client name: Product name: Inspection Location: PRE-Shipment Inspection Report(PSI) PRE-SHIPMENT INSPECTION REPORT (PSI) 140216 Converse Limited Trousers ZheJiang
SUPPLIER ASSESSMENT REPORT -- Follow Up Audit Report Number: QIP-ASR
SUPPLIER ASSESSMENT REPORT -- Follow Up Audit Report Number: QIP-ASR1531677 Follow Up Audit Date : 24 Dec., 2015 This report is issued by Focus Technology Co., Ltd. () and the supervising inspectorate
ANACONDA. Quality Assurance Program. Vendor Compliance Manual. Local Vendor Non-Cross Dock Requirements. Version 3 October 2014
ANACONDA Quality Assurance Program Vendor Compliance Manual Local Vendor Non-Cross Dock Requirements Version 3 October 2014 Page 1 Quality Assurance Program Version 3 Page 2 Quality Assurance Program Version
Page: 1/9 Customer: Example LLC Report ID: SH16D2A Date:
Page: 1/9 Customer: Example LLC Report ID: SH16D2A Date: 2016-10-10 DISCOVER SOURCING LIMITED Qin@discoversourcing.com www. 202-09-2F-1B, 38-Debao Rd, Shanghai, China Customer: Example LLC Page: 2 / 9
Inox Mare shipping and packaging instructions compliance
Inox Mare shipping and packaging instructions compliance General Remarks All deliveries to our companies must be made in compliance with following instructions. These shipping and packaging instructions
/Tariff list. Cargo Charter. Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen mbh. Rev. 1 - valid from January 1st, 2018
/Tariff list Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen mbh Rev. 1 - valid from January 1st, 2018 Cargo Charter Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen
Transnet Port Terminals PRE-ADVISE GUIDE FOR REGISTERED NAVIS CUSTOMERS SOLAS VERIFIED GROSS MASS EDITION JULY 2016
Transnet Port Terminals PRE-ADVISE GUIDE FOR REGISTERED NAVIS CUSTOMERS SOLAS VERIFIED GROSS MASS EDITION JULY 2016 DOCUMENT CONTROL VERSION AUTHOR DATE COMMENTS 1.0 N.Ranchod 2016-06-26 Document re-design
Distribution Vendor Compliance Standards
I. UPC Compliance 1. Retail customer UPC Ticket or Label must meet specifications per the product technical package submitted by the Vince team. 2. Vince UPC Label on polybag must meet specifications per
SUPPLIER ASSESSMENT REPORT
SUPPLIER ASSESSMENT REPORT -- Follow Up Audit Report Number: QIP-ASR1232701 This report is issued by Focus Technology Co., Ltd. () and the supervising inspectorate (SGS-CSTC Standards Technical Services
AM Retail Group, Inc. C-TPAT EVALUATION
DATE: FACILITY NAME: FACILITY ADDRESS: PRINT NAME OF FACILITY MANAGER/RESPONSIBLE PARTY: --------------------------------------------------------------------------------------------------------------------------------
/Tariff list. Car-Charter. Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen mbh. Rev. 2 - valid from January 1st, 2019
/Tariff list Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen mbh Rev. 2 - valid from January 1st, 2019 Car-Charter Cargogate Flughafen München Gesellschaft für Luftverkehrsabfertigungen
SECTION INDUSTRIAL ACCESS / INSPECTION HATCH. A. Industrial Access / Inspection Hatch: Model AH-710
Page 1 of 6 PART 1 - GENERAL SECTION 08370 INDUSTRIAL ACCESS / INSPECTION HATCH 1.1 SECTION INCLUDES A. Industrial Access / Inspection Hatch: Model AH-710 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry
Get your Freight rolling. FOT = Freight On Board
Get your Freight rolling FOT = Freight On Board Multilateral Consolidation of LCL Factory 1 Factory 2 China Consolidation Terminal Door to door / FOT / Port to port Rates China London 25cmb+@ 195/cbm London
Fulfillment by Lazada
Fulfillment by Lazada 1 How FBL works? 1 2 3 You create PO whenever you want to send products to Lazada s warehouse. Lazada can support you planning the list of SKUs You send products to Lazada s warehouse.
Installation Instructions/Operation and Maintenance Manual. Models PLG-60 PLG-72. PS DOORS Contact Information. Website psdoors.
Rev. 091416 Pallet Gate Installation Instructions/Operation and Maintenance Manual Models PLG-60 PLG-72 Table of Contents Product Information...2 Installation Instructions...3 Operation...6 Inspection
HATCHSAFE Installation Instructions/Operation and Maintenance Manual Models: All Models
HATCHSAFE Installation Instructions/Operation and Maintenance Manual Models: All Models Contact Information Table of Contents: Safety Precautions... 2 Product Information... 2 Installation Instructions...
Logistics Insight Corporation Romulus ODC Version 3.2 Procedure Manual Subject: Material Flow July 31, 2014
2.2 Cross Dock SCOPE This process describes the actions taken when unloading inbound loads, checking freight, and loading to a specified outbound trailer. RESPONSIBILITY The ODC Manager is responsible
Warehouse Management System
Warehouse Management System PURPOSES Reinforcement of our global logistics activities TMT Total control of the global operation: transport, customs clearance, logistics Client More security On-line tracing
e-shipping Portal POWERED BY
POWERED BY Time is money NO VGM NO ENTRY VGM must be transmitted and received by carrier and terminal operators before containers can be accepted into the terminal. If containers arrive at port without
Vehicle Control Systems An American Standard Company. Packaging and Labeling Requirements Manual for all suppliers
Vehicle Control Systems Packaging and Labeling Requirements Manual for all suppliers TABLE OF CONTENTS 1. INTRODUCTION... 3 1.1. SCOPE AND GENERAL MEANING... 3 1.2. REQUIREMENT... 3 1.3. PROBLEM RESOLUTION...
Here are five things to look for in your supplier to ensure you get the highest quality and best pricing for your fixtures
white paper series Today, retailers are looking for value and quality when buying their fixtures. The job of a smart retailer is to make an informed choice about their fixture supplier to ensure the best
Depot Dry Receiving Guidelines. Standard Operating Procedure TABLE OF CONTENTS
I s s u e d a t e D o c u m e n t N o. Costco AUS SOP-209 P a g e 1 of 13 Depot Dry Receiving Guidelines Standard Operating Procedure TABLE OF CONTENTS PAGE 1. INTRODUCTION 2 1.1 Key Information 1.1.1
A. ASTM A 36 - Standard Specification for Carbon Structural Steel.
Page 1 of 5 SECTION XXXXX INDUSTRIAL VENTILATION LOUVER / DAMPER Part 1. GENERAL 1.1 SECTION INCLUDES A. Top Pivot Louver / Damper B. Bottom Pivot Louver / Damper C. Center Pivot Louver / Damper D. Sliding
How to Fulfill An Order in the Seller Center
How to Fulfill An Order in the Seller Center Step 1 : Order Verification Lazada verifies all orders before it is pushed to your Seller Center. Payment Verification. If payment fails, order automatically
Rous Head Developments and Mandatory Verified Weighing of Export Containers. CBFCA Conference - May 2016
Rous Head Developments and Mandatory Verified Weighing of Export Containers CBFCA Conference - May 2016 ROUS HEAD DEVELOPMENTS 13/05/2016 1 Ex-Qube Tydeman Cnr. Tydeman & Port Beach Roads Nearly 3 ha Successful
Supply Chain Regional Distribution Centres - Receiving Standards
Supply Chain Regional Distribution Centres - Receiving Standards Receiving Standards Page 1 of 10 Contents Receiving Standards... 3 Introduction... 3 Packaging / Loading Standards... 4 General... 4 Outer
TERMS & CONDITIONS. Please read carefully, here you can find our general terms and conditions for any shipment.
TERMS & CONDITIONS 1 Please read carefully, here you can find our general terms and conditions for any shipment. QUESTIONS & ANSWERS DDU DDP SERVICE Please visit our Support Department website: www.nfsforwarder.com
tbs TDC5 (5027)P 3 DRAFT TANZANIA STANDARD Textiles Code of practice for inspection and acceptance criteria for used textile products (Mitumba)
tbs TDC (0)P DRAFT TANZANIA STANDARD Textiles Code of practice for inspection and acceptance criteria for used textile products (Mitumba) TANZANIA BUREAU OF STANDARDS DRAFT TANZANIA STANDARD TDC (0) P
CONCOR CCLS Version 1.0. E-Filing Project. Page 1 of 237
Training Manual E-Filing Project CMC Limited Page 1 of 237 Table Of Contents 1. INTRODUCTION... 13 2. LOGIN... 13 3. HOME / MENU... 15 4. EXPORT... 16 4.1 Permits... 16 4.1.1. Empty Arrival Permit Generation...
PRODUCT QUALITY & SAFETY IN FOOD SUPPLY CHAIN - UNILEVER
PRODUCT QUALITY & SAFETY IN FOOD SUPPLY CHAIN - UNILEVER Quality in Unilever Role of Quality To ensure the design and production of products meet our environmental, consumer safety and quality standards
SECTION 8 - GLOBAL INSPECTION PROTOCOL VM DOCUMENT 2017 VERSION 1.0. SECTION 8 Global Inspections Protocol. Page 1
VM DOCUMENT 2017 VERSION 1.0 SECTION 8 Global Inspections Protocol Page 1 This guideline is a Destination Maternity / Intertek Inspection Protocol. 1.0 Highlights/Requirements: 1.1 This protocol is applicable
SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
Airport Operation and Global Supply Chain
Airport Operation and Global Supply Chain By WANG, Xiaodong U of Int l Busness &Economics Beijing, China 1-1 Air cargo and Global SC Airfreight is growing as world commodity trade increases Why transport