Supplier cooperation Supplier organization Inspector s opinion on the factory Average Average Average
|
|
|
- Rosanna Fleming
- 5 years ago
- Views:
Transcription
1 Pre-Shipment Inspection(PSI) N-mx PRODUCT INFORMATION Client name: * Product name: Girls fleece lined tights Style number : * Inspection location: YiWu, Zhejiang Inspection date: May.12th, 2017 Expected shipment date: NA PO number: * Supplier: * Quantity ordered: 16,016 Pks Qty ready for inspection 14,560 Pks (91%) Ref Sample available: N (YN) Supplier cooperation Supplier organization Inspector s opinion on the factory Average Average Average Inspector name: * Supplierfactory contact: Mr. * 139 * Factory address *, Fotang, Yiwu City, Zhejiang Province, China Man-day spent: 1 Departure time from office Arrival Time at the Factory Departure Time from the Factory NA 10:00 18:30 OVERALL CONCLUSION Pending INSPECTION RESULT SUMMARY: DEFECTS Inspection Standard: ISO (Mil Std 105E) Critical Major Minor Inspection Level: II Found AQL for defective selection (Critical MajorMinor): Max Inspection lot Size: 315 Checked Total inspected cartons 18 Result Within AQL Page 1 of 30
2 CHECK ITEM RESULT SUMMARY: Comments: Quantity, Dimensions & Weight of OK Total 14,560 pks(91%) has been packed during inspection. CartonInner box, UPC Code Color of Products, Appearance, Detail OK Please ref the color in below details. Photos, Marking & Label & Logo Defectives List OK Please ref the 2.4 Defectives List. Dimensions & Weight of Product NA See below Dimension list Tests and Special Requirement (UPC OK ScanDrop TestFunction Test ) See below photos Shipping Marks NOT OK Please ref the IMPORTANT REMARKS 2. Packing & Packaging NA See below details Detail Photos of Rest Item NA NA IMPORTANT REMARKS: 1. Total order quantity is 16,016 pks, the factory has been finished about 100% of shipment and packed 520 ctns (91%) during inspection. 2. The side shipping mark was wrong. 3. All of sample size found the care label seamed by extra stitch. 4. The reference sample and measurement chart provided by supplier. Page 2 of 30
3 Finished goods piled Finished goods piled After sample selected After sample selected Selected cartons for check quality Number of selected carton (18 ctns) Page 3 of 30
4 Handwrite number on selected carton Handwrite number on care label for each sample size Inspection place view QUALITY CRITERIA 1. Quantity Expected Result Result Actual FindingComments Remark 1 NA NA Quantity of packed products: Quantity of finished & unpacked products: Quantity of semi-finished products: 14,560 Pks 1,456 Pks 0 Pks Page 4 of 30
5 PO# Style # Color Order Qty Available Quantity UnitsCarton (Units) Packed Finished but not Not finished 28 Units Cartons packed (Units) (Units) Carton -BLACKBLACK weight(kgs) OC6 -BLACKWINE Carton size(cm) -GREYNAVY 51.5X44.5X26.5 TOTAL Pictures Page 5 of 30
6 2. ColorAQL for Appearance 2.1 Color Expected Result Result Actual Finding Comments NA See below photos Page 6 of 30
7 Pictures Color compared with reference sample (right one) Result: ok 2.2 Dimension & weight Appearance Detail Requirements Result: Comments: NA Please ref the a actual measurement in NA below measurement chart Page 7 of 30
8 Measurement table Actual Finding Page 8 of 30
9 Pm Sonny MP ** MEASUREMENTS ON FINISHED GARMENT** SM TOL +- A FRONT RISE RELAXED B RISE EXTENDED NA C INSEAM RELAXED D INSEAM EXTENDED NA E HIPSEAT RELAXED F HIPSEAT EXTENDED NA G THIGH RELAXED H THIGH EXTENDED NA I LEG OPENING J WAISTBAND 12 FLAT K WAISTBAND 12 EXTENDED NA L WAISTBAND DEPTH M CUFF HEIGHT AT LEG OPENING NA ** MEASUREMENTS ON FINISHED GARMENT** ML TOL +- A FRONT RISE RELAXED B RISE EXTENDED NA C INSEAM RELAXED D INSEAM EXTENDED NA E HIPSEAT RELAXED F HIPSEAT EXTENDED NA G THIGH RELAXED H THIGH EXTENDED NA I LEG OPENING J WAISTBAND 12 FLAT K WAISTBAND 12 EXTENDED NA L WAISTBAND DEPTH M CUFF HEIGHT AT LEG OPENING NA Page 9 of 30
10 Page 10 of 30
11 Page 11 of 30
12 Page 12 of 30
13 Appearance Detail Page 13 of 30
14 Page 14 of 30
15 Page 15 of 30
16 2.3 MarkingLogo and label Items Result: Comments: Logo NA See bellowing photos Content of instruction on label NA See bellowing photos Country origin label NA See bellowing photos Size of label NA See bellowing photos Printinglabel on Polybag NA See bellowing photos Others NA See bellowing photos Label location Label location Page 16 of 30
17 Page 17 of 30
18 Page 18 of 30
19 BLACKBLACK--CH BLACKBLACK--CH BLACKBLACK--M BLACKBLACK--M BLACKWINE--CH BLACKWINE--CH Page 19 of 30
20 BLACKWINE--M BLACKWINE--M GREYNAVY--CH GREYNAVY--CH BLACKWINE--M BLACKWINE--M Page 20 of 30
21 2.4 Defectives list Untrimmed Thread Untrimmed fabric----min CRI MAJ MIN Defectives description Holes----Maj CRI MAJ MIN Defectives description Page 21 of 30
22 Wire drawing ----Maj CRI MAJ MIN Defectives description AsymmetryPoor sewing ----Maj CRI MAJ MIN Defectives description Page 22 of 30
23 Color yarn----min CRI MAJ MIN Defectives description Dye mark----maj CRI MAJ MIN Defectives description Page 23 of 30
24 Defective list Critical Major Minor Total defects found Defects Max. Allowed Checked sample size Within AQL 3. Tests and Special Requirement Test description Comments from Inspector Result NA NA NA Test description Sampling Findings Result Needle Damage (For knitted garments) - - Pull the seams by hand with a tough force. Check if there is any needle holes caused by the needle machine - perform this test on all the seams -double check and take pictures especially for waistband, leg hem, pocket seam, front and back rise... -If the needle damage holes were found, then the sample size increase to S4 Your thumbs have to be close to the seam line like the picture above. You should have a round movement with you hand in order to pull out the stitches and check it correctly. S4 Inspector did pull test by hand with proper force due to no pull gauge in hand. Passed Page 24 of 30
25 Color shading check - Place 100% of pieces inspected for the visual check side by side and identify the different dye lots - I Take picture as below: (Minimum acceptable 34 above). I Pls refer the photos as below. Passed Page 25 of 30
26 Rub test - to check the color fastness of the fabric. Rub the item 10 times over a 10 cm distance with a force of 9N (1kg). S4(32 Pcs) Pls refer the photos as below. Passed 4. Shipping marks Items Result: Comments: Front marks NA Side marks NA Please refer to Remark 1 Inner box marks NA Pictures Main shipping mark ( on two side ) Side shipping mark (on two side) Page 26 of 30
27 5 layers carton Carton sealed by glue Carton view 5. Packing & packaging Items Result: Comments: Unit packing NA Please ref below pictures Inner packing NA Outer packing NA Page 27 of 30
28 Carton opened 28 sets 3 colors carton Inner packing view Inner packing view Page 28 of 30
29 Factory view Pictures Draft report Page 29 of 30
30 IMPORTANT NOTES 1.This report reflects our findings at the time and the place of inspection based on random samples selected. 2.This inspection was carried out the best of our knowledge and abilities,and our responsibility is limited to the exercise of reasonable one. 3.This report does not relieve the sellers from their contractual obligations nor does it prejudice buyer s right for compensation for any apparent andor hidden defects not detected during our inspection or occurring thereafter. 4.This report does not evidence shipment. End of the Report Page 30 of 30
Container Loading Supervision(CLS) N-us2-170502.1 1. GENERAL INFORMATION Client name : * Product Description: Denim display tables Style number : * Supplier name: * Loading location: Ningbo, China Date
Inspection Report(PSI)
Inspection Report(PSI) O-cn-1140491 R-us3-119023,R-us3-118920,R-us3-118781 PRODUCT DESCRIPTION Client Name: Product Name: Inspection location: Anonymous Company Jacket - 1234 (AB11) JinJiang Inspection
Pre-shipment Inspection Report DOCUMENT #:AQI-DOC-PSI REPORT
Report #: PSI20180515-180506-B General Information: Client name Product name Item PO# Ordered quantity XXX 6 ports USB Charging Station XXX N/A 2500Pcs Inspection Date 2018/5/15 Arrival time Departure
Pre-shipment Inspection Report
Pre-shipment Inspection Report Report #: PSI20180123-180117-A General Information: Client name Product name XXX Chairs Item / PO# 3971 Ordered quantity(lot size) 777pcs Inspection Date 2018/01/23 Arrival
PRE-SHIPMENT INSPECTION REPORT (PSI)
General Information: SGR Inspection report: Client name: Product name: Inspection Location: PRE-Shipment Inspection Report(PSI) PRE-SHIPMENT INSPECTION REPORT (PSI) 140216 Converse Limited Trousers ZheJiang
Inspection Report(IPC)
Inspection Report(IPC) PRODUCT DESCRIPTION O-cn-0934710 Client Name: ABC Clothing Company Product Name: Officer Hat Inspection location: Tianjin Inspection date: 12/31/2011 Your reference number: 12345
Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x
![Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x](/thumbs/83/87523087.jpg "Inspection Report SIMPLIFY AQL FAILED & SEE REMARK *1~*2 [CLIENT HAS THE FINAL DECISSION] AQL ACCEPTED / FAILED &SEE REMARKS *1 to *x")
Inspection Report SIMPLIFY130206 FRI (Final random inspection) PSI (Pre-Shipment inspection) DUPRO (During Production Inspection) Loading Supervision Sample Pickup Re-inspection (previous report nº): Amendment:
Inspection Report(CLC)
Inspection Report(CLC) PRODUCT DESCRIPTION O-cn-0915056 (Re-Inspection after O-cn-0914894 performed on 01-14-2012) Product Name: Steel Metal Desk Inspection location: TianJin, China Inspection date: 12-31-2011
eparture time from home / office Arrival Time at the Factory Departure Time from the Factory 7:00 10:30 17:00
PRODUCT DESCRIPTION Product Name: 12621 Russell Hobbs Smoothie Maker Inspection location: Dongguan Inspection date: 2007/11/9 P/O number: Item number: Supplier: Tai Yu (Dongguan) Order quantity: No. of
INSPECTION REPORT. Beyond AQL FAILED I. GENERAL INFORMATION II. INSPECTION SUMMARY III. REMARKS. Client: XXX Conclusion Report Date: 3 July 2012
Form No.: VTR-QR-CZ-RF-015 V1.1 Page 1 of 19 I. GENERAL INFORMATION Service Performed: Client: Supplier: Factory: Product Name: During Production Inspection XXX XXX XXX P.O. No.: 2472 Item No.: 324363
In-Process Inspection
Report No. : xxxxxxxxxxxxxxxx Re - Inspection Product : Knitten Gloves P/O No. : / Part.-No. : / Client : xxxxxxxxxxxxxxxx Order-Qty : 15,000 pairs Supplier : xxxxxxxxxxxxxxxx Participants Supplier : Mr.
BV PROPRIETARY SAMPLE DOCUMENT INSPECTION REPORT A. GENERAL B. INSPECTION OVERALL RESULT SUMMARY C. REMARKS
Inspection No.: 10123 Report Date: Sep 9, 2013 Page 1 of 9 A. GENERAL Vendor/Supplier Name: YZ Int'l Ltd Factory Name: OPQ Knitting Factory Product Description: Men Sweater Approved Sample: YES NO Product
REPORT NUMBER. Inspector / Reviewer INSPECTION DATE
! Mis-Inspection INSPECTION REPORT CLIENT Example Company REPORT NUMBER XXX9E ATTENTION PAGE OF TITLE FAX NUMBER Quality Manager Inspector / Reviewer QC Engineer Technical Supervisor CC TO TITLE FAX NUMBER
Pre-Shipment Inspection
Pre-Shipment Inspection This PPAI product including images, format, and text (the content ) are protected by applicable copyright and trademark laws and are owned either by PPAI or by third parties who
CHINA INSPECTION SERVICE CO.,LTD
In-Production Inspection Report General Information: Report Number: Product name: Item #: PO# IPI-CIS15111001 Aqua Beat XXXX N/A Ordered quantity: Please see part 1 Client name: Supplier name: Inspection
: Final Random Inspection
Final Random Inspection Report Report No.: FCT-JY****** INSPECTION INFORMATION Client : *********************** Attn : *********************** Supplier : *********************** Factory : ***********************
A. INSPECTION RESULT SUMMARY (Details can be referred to corresponding sections in this report)
GENERAL INFORMATION: Page 1 of 28 Client : Anonymous Clients Attn : Mr.XX Supplier/Vendor : Anonymous supplier Order Quantity : 1,850 + 1,850 = 3,750 pieces Factory Name : Anonymous factory Shipped Quantity
CHINA INSPECTION SERVICE CO.,LTD
Pre-shipment Inspection Report General Information: Report Number: N/A Product name: Wall clock Item #: 170092070# PO# 36006678# Ordered quantity: 900PCS Client name: N/A Supplier name: Zhangzhou XXXX
PRODUCTION MONITORING INSPECTION REPORT
PRODUCTION MONITORING INSPECTION REPORT Conducted by Jacky Supplier: Product: XXXXXXXXXX Co., Ltd IQF Strawberry Inspection location: XXXX city, XXXXX Province Inspection date: XXXXXXXXXXXX Production
PRODUCTION MONITORING INSPECTION REPORT
PRODUCTION MONITORING INSPECTION REPORT Conducted by Jacky Supplier: Product: XXXXXXXXXX Co., Ltd IQF Strawberry Inspection location: XXXX city, XXXXX Province Inspection date: XXXXXXXXXXXX Production
AQM Guideline Myanmar
AQM Guideline Myanmar Procedure 1 History of revisions Date Scope of revision Page 3.1 8/11/2017 Creation whole 3.2 8/12/2017 AQM application form with survey 12 3.3 11/04/2018 AQM address 4 2 Summary...
: STYLE : FAMX FMR SHAWL COLLAR COAT. COLOUR : Natural SIZE : XS, S, M, L, XL, 2X & 3X
INSPECTION REPORT FOR QVC UK (GMT) TO : QVC The Shopping Channel REPORT # : SHIJ124017 ATTN : QVC THE SHOPPING CHANNEL - LONDON - CLAIRE SADLER/JAY JOB # : -- C.C. : TIGER J SHANGHAI REP OFFICE - GANJIE/NICKY
Inspection Report(PSI)
Inspection Report(PSI) O-cn-1205880_1 PRODUCT DESCRIPTION Client Name: Product Name: Brand name P/O number: Inspection date: Expected shipment date: Factory: Anonymous Company BROCCOLI XXXX XXXX 01/Mar/2012
REPORT NUMBER. Inspector / Reviewer INSPECTION DATE VENDOR MANUFACTURER INSP LOCATION
Mis-Inspection INSPECTION REPORT CLIENT Example Company REPORT NUMBER 7E ATTENTION PAGE OF TITLE Quality Manager Inspector / Reviewer QC Engineer Technical Supervisor FA NUMBER CC TO TITLE FA NUMBER SERVICE
SECTION 8 - GLOBAL INSPECTION PROTOCOL VM DOCUMENT 2017 VERSION 1.0. SECTION 8 Global Inspections Protocol. Page 1
VM DOCUMENT 2017 VERSION 1.0 SECTION 8 Global Inspections Protocol Page 1 This guideline is a Destination Maternity / Intertek Inspection Protocol. 1.0 Highlights/Requirements: 1.1 This protocol is applicable
INSPECTION REPORT Report No.: NKGWT To : NANJING EFG CO.,LTD Date: 27-Dec-2010 Att : Kelven From : Mike Wang
SGS-CSTC Nanjing Branch 19/F,Ruihua Building, No.315, Zhongshan South Road, Nanjing.Jiangsu Province, China P.C:210001 Tel:86 025 83466455 Fax:86 025 83466107 INSPECTION REPORT Report No.: NKGWT00047939
Pre-Shipment Inspection Report
NO.: G001 Date:12 th Nov 2010 Inspector: Robin Page 1 of 8 EXECUTIVE SUMMARY AND INSPECTION STANDARD To: Attn.: Product Description: Vendor/Supplier: Factory Name: Factory Contact: Able doer corporation
ASIA TEXTILE INSPECTIONS LTD 2010 Kowloon Plaza 485 Castle Peak Road - HONG KONG Tel
Date: Report Number: Page 1 of 4 FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: 100% Polyester Satin, Confetti Print Style/Code: 100% Polyester Satin, Confetti
Fashion Manufacturers Ltd. Quality Assurance Program
Fashion Manufacturers Ltd. Quality Assurance Program MISSION As the fashion business becomes increasingly competitive, the quality of our product must improve. For this reason, we have created this Quality
AQUA INTERNATIONAL LIMITED
INSPECTION REPORT Report No.: Date: 5-0346 8/9/0/APR/5 Customer : INNOVATIVE TECHNOLOGY P.O.No. : QVC PO#832063, IT PO#LT-Q-BR78.R2 (PI/IT5023 REV.4) Supplier: LEETAC Brand : IT Model No.: ITVS-200B Serial
FINAL RANDOM INSPECTION(FRI)
FINAL RANDOM INSPECTION(FRI) OR PRE-SHIPMENT INSPECTION(PSI) What is Final Random Inspection (FRI)? Here in this presentation, We explained about FRI briefly. CONTENT BACKGROUND QUALITY RISK / CHALLENGE
CHINA INSPECTION SERVICE CO.,LTD
Container Loading Supervision Report General Information: Report Number: CLS-PO101392 Product name: Please see part 1 Product #: Please see part 1 PO# 32145678 Ordered quantity: On-site weather: Client
CHINA INSPECTION SERVICE CO.,LTD
Container Loading Supervision Report General Information: Report Number: CLS-PO101392 Product name: Please see part 1 Product #: Please see part 1 PO# 32145678 Ordered quantity: On-site weather: Client
TQM INSPECTION SERVICES LTD.
LTD. GENERAL INFORMATION PREPARED BY HENRY LEUNG, MBA-TQM MANAGING DIRECTOR- LIMITED DATE OF PREPARED: 1ST APRIL., 1996 Units 1233 & 1235, 12/F, HITEC, 1 Trademart Drive, Kowloon Bay, Hong Kong TEL: (852)
Distribution Vendor Compliance Standards
I. UPC Compliance 1. Retail customer UPC Ticket or Label must meet specifications per the product technical package submitted by the Vince team. 2. Vince UPC Label on polybag must meet specifications per
Inspection Report. Failed beyond AQL. * Refer to Section C for Remarks
Inspection Report A. GENERAL Client Name: XXXXXXXX To: XXX From : TS INSPECTION SERVICES Project No.: HIE12110009 Report No.: HIE12110009 Inspection Date: 17-NOV-12 Report Issue Date: 17-NOV-12 Vendor/Supplier:
VENDOR INSPECTION REPORT
Inspector: Mr. Tom Tu Page : 1 of 19 Project name: Piping Inspection - China - Litonglian Executing Country: Client: XX Holding Group PO No.: 42010 Contact: JM +49 Vendor/Manufacturer: Litonglian / HEBEI
FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X X 68, 118 width
Date: Report Number: Page 1 of 5 FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X 30 76 X 68, 118 width Style/Code: 30 X 30 76 X 68, 118 Order
QUALITY ASSURANCE. NORDSTROM PRODUCT GROUP QUALITY ASSURANCE PROGRAM FINAL RANDOM INSPECTIONS July 2017
QUALITY ASSURANCE 2017 NORDSTROM PRODUCT GROUP QUALITY ASSURANCE PROGRAM FINAL RANDOM INSPECTIONS July 2017 TABLE OF CONTENTS SECTION PAGE(S) Foreword 2 Introduction - NPG Quality Assurance Team 3 Final
Prototype samples can be made in available fabric.
GARMENTS / TRIMS / MATERIALS QUALITY PROCESS CONTROL PROTOTYPES Must be measured at source These are required to be produced for every new/amended style per season, exact to Specification provided by Umbro.
Inox Mare shipping and packaging instructions compliance
Inox Mare shipping and packaging instructions compliance General Remarks All deliveries to our companies must be made in compliance with following instructions. These shipping and packaging instructions
David s Bridal Vendor Compliance Manual Appendix E Product Testing and Certification Table of Contents
DB Vendor Compliance Manual App. E Product Testing & Certification page 1_ David s Bridal Vendor Compliance Manual Appendix E Product Testing and Certification Table of Contents Section 1 Market Vendor
Initial Inspection Report
Initial Inspection Report General Information: Report S/N: P/O number: Inspection location: Inspection date: Expected shipment date: Reference sample available: LAN001 42201#42202# shopping trolley bag
INSPECTION REPORT
INSPECTION REPORT 14-4240 CONSIGNMENT DESIGTED AS: GOOD DESCRIBED AS GOODS DESCRIBED AS PER INVOICE COPY DECLARED QUANTITY OFFERED QUANTITY CONSIGNEE EXPORTER / SELLER INVOICE NO. & DATE: L/C NO. & DATE:
Supplier Capability Assessment
SUPPLIER CAPABILITY ASSESSMENT General Details Factory Name Factory and Audit Location Yiwu RedCherry Jewelry Co Ltd Building #4, No. 755, Xuefeng West Road, Yiwu City, Zhejiang Province, China Audit date
Chapter 5. BIG on QUALITY
Chapter 5. BIG on QUALITY 1 GENERAL QUALITY ASSURANCE POLICY OVERVIEW Inspection Policy All merchandise is inspected upon receipt at DLG for conformance to quality and measurement specifications. If the
The Power Of Processes! Part 3- Product Production
The Power Of Processes! Part 3- Product Production In the Power of Processes, we have talked about Customer Service and you have created your processes that are going to help you have a more complete and
GARMENT FACTORY EVALUATION Agent :
Physical Address City Country PAKISTAN Year established: Business License # TYPE PLOT NO A-25 METROVILE. S.I.T.E KARACHI FABRIC PROCESSING Position Telephone Fax E-Mail OWNER 92 213 2588108 92 213 2588111
Apparel Inspection Requirements for Vendors
Ascena Global Sourcing Apparel Inspection Requirements for Vendors Version 1.0 0 TABLE OF CONTENT 1.0 PURPOSE 2 2.0 APPLICATION.. 2 3.0 PRE INSPECTION.. 2 4.0 CONFIRMATIONN 2 5.0 SCHEDULING 2 3 6.0 IN
Chapter 5. BIG on QUALITY GENERAL QUALITY ASSURANCE POLICY OVERVIEW. Internal Inspection Policy. 1. Merchandise Quality Standards
Chapter 5 BIG on QUALITY GENERAL QUALITY ASSURANCE POLICY OVERVIEW Internal Inspection Policy All merchandise received in the DL Group Distribution Center in Canton, MA is inspected for conformance to
HOW TO PREPARE AN INSPECTION CHECKLIST?
www.sofeast.com HOW TO PREPARE AN INSPECTION CHECKLIST? Different importers sell on different markets and have different requirements. If you only approve a sample and some basic product specs, you leave
Apparel Inspection SOP
Ascena Global Sourcing Apparel Inspection SOP Version 2.0 March 2016 TABLE OF CONTENT 1.0 PURPOSE 2 2.0 APPLICATION.. 2 3.0 PRE-INSPECTION.. 2 4.0 CONFIRMATION 2 5.0 SCHEDULING.. 3 6.0 IN-PROCESS INSPECTION
Subject: Apparel Manufacturing. Unit 7: Quality Assurance. Quadrant 1 E-Text
Subject: Apparel Manufacturing Unit 7: Quality Assurance Quadrant 1 E-Text Learning Objectives The learning objectives of this unit are: Describe the different methods of maintaining quality in the apparel
Reference: ISTA pre-shipment testing
BV CPS-IAA TM G10 Revision: 05 Reference: ISTA pre-shipment testing Prepared By: Simon Ng Approved By: Herbert Zhu Date: Feb.06, 06 For the benefit of business and people Training Objectives To Understand
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT BV Report No.: 10162570292 Assessed Factory Name Assessed Factory Address City / Country Consigner of Assessment GS Supplier / Manufacturer
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GA Translated English of Chinese Standard: GA
Translated English of Chinese Standard: www.chinesestandard.net Sales@ChineseStandard.net ICS 13.220.10 PUBLIC SECURITY INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GA C 85 Replacing GA 10-2002,
FACTORY AUDIT REPORT (FA)
Form No.: FA_CFI_2013J_V1.0 Page 1 of 17 FACTORY AUDIT REPORT (FA) Client METAL DELS Booking No.: CFI-11031317 Supplier Hong Kong Steel Land.,Ltd Auditor Jack Chen Factory HUA DONG STEEL (GROUP) Audit
Vendor Partnership Manual. Section 17 Furniture Standards Guide. (For Furniture Vendors Only)
Section 17 (For Furniture Vendors Only) Please review this chapter carefully if you are a participating furniture vendor. This is a new chapter since January 2014. TABLE OF CONTENTS 1. STATEMENT OF PURPOSE...
CONSUMER GOODS USA. We make global trade flow smoother and safer
CONSUMER GOODS USA We make global trade flow smoother and safer Vision & Mission Our Vision» Be the best worldwide provider of trade facilitation and trade security services. Our Mission» Provide innovative
Academy Apparel 376 VCP
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for apparel construction and labeling information. Vendors must purchase all polybags, hang tags, and other packing materials from
Journal of Innovation & Development Strategy (JIDS)
Reprint ISSN 1997-2571 (Web Version) Journal of Innovation & Development Strategy (JIDS) (J. Innov. Dev. Strategy) Volume: 6 Issue: 1 April 2012 J. Innov. Dev. Strategy 6(1):49-53(April 2012) IMPROVE THE
THE FOLLOWING GENERAL REQUIREMENTS APPLY ON ALL ORDERS
PROCUREMENT QUALITY ASSURANCE CLAUSES PAGE 1 OF 9 THE FOLLOWING GENERAL REQUIREMENTS APPLY ON ALL ORDERS A. Each certification document and report required shall be in the English language and identified
Carton Packaging, Packaging and Shipping requirements
Contents Carton Packaging,... 1 Footwear... 1 Shoe Laces... 1 Shoe Boxes... 2 Footwaer Master Carton Packaging... 3 Apparel and Accessories... 5 Apparel and Accessories Master Carton Packaging... 7 General
MATERIAL REQUISITION FOR BOLTS AND NUTS
Title: MATERIAL REQUISITION FOR BOLTS AND NUTS Page: 1 of 12 MATERIAL REQUISITION FOR BOLTS AND NUTS 6 5 4 3 2 1 0 08-JUN-2013 ISSUED FOR APPROVAL M. KAMALOU A.MOHAMADIZADE A.MOHAMADIZADE REV. DATE STATUS
Supplier Certification Program
Report No.: 1219872 Date of Report: 29-11-2012 Page 1 of 23 Supplier Certification Program Initial Certification Costco Supplier Certification 100% - 85% no critical Audit Valid for facility for 1 year
! (PPE/PFN-B-MR/002)
! (PPE/PFN-B-MR/002) Technical File: PPE/PFN-B-MR/002 Effective Date: 29 Jul. 2011 Section: Table of Contents Page 1 of 1 TABLE OF CONTENTS Section Description Revision i Cover Page - ii Content Page -
CCS Implementation Manual 2012
Textile Exchange CCS Implementation Manual Version 1.0-2012 CCS Implementation Manual 2012 CS CONTENTCLAIM CSTANDARD 1 Table of Contents Introduction... 3 SECTION A: CCS Standard Interpretations... 4 A1
MMG 856 Inbound Ship Notice/Manifest Macy s Merchandising Group ANSI X.12 Version 4010 ANSI X.12 Document Mapping Effective 03/15/2016
MMG 856 Inbound Ship Notice/Manifest Macy s Merchandising Group ANSI X.12 Version 4010 ANSI X.12 Document Mapping Effective 03/15/2016 STANDARD CARTON PACK STRUCTURE SHIPMENT/ORDER/ITEM/PACK The following
2018 PRODUC T C ATA LO G D2_171101N_C82643_WetEffect.indd 1 12/6/17 11:38 AM
2018 PRODUCT CATALOG TABLE OF CONTENTS RASH GUARDS... 4-7 BOARD SHORTS... 9 CROSS TRAINING... 10 POLICIES... 11 Wet Effect is an active-wear company specializing in board shorts, rash guards and cross-training
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT BV Report No.: 10123400306 Assessed Factory Name Assessed Factory Address City / Country Consigner of Assessment GS Supplier / Manufacturer
SECTION 15 CARTON REQUIREMENTS
SECTION 15 CARTON REQUIREMENTS CARTON REQUIRMENTS OVERVIEW 1. Carton Labels are required on all shipments from all vendors 2. We suggest as a best practice extra taping on your cartons. It guards against
TRC-FWR TINGLEY RUBBER CORPORATION. Women s Weather Fashions PVC Knee Boot. Product Specification
TRC-FWR-51441 TINGLEY RUBBER CORPORATION Product Specification Women s Weather Fashions PVC Knee Boot Style 51441 Black/Clear / Plain Toe All products conform to Tingley general manufacturing quality standards
VCP WWW US Warehouse Requirements Revision #: 08
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for product construction and labeling information. Vendors must purchase all shoeboxes, hang tags and other packing materials from
Transnational Skill Standards Quality Executive Sewing Line
Transnational Skill Standards Quality Executive Sewing Line REFERENCE ID: TOS/AMH/Q1401 Mapping for Quality Executive Sewing Line (AMH/Q1401) with UK s Link to Indian Qualification:http://sscamh.com/admin/app/webroot/files/ptno/Qualification%20Pack%20-
DATE: April 15, Kellwood Suppliers. Kellwood Distribution. SUBJECT: Charge-backs for Violation of Packaging, Routing and Documentation Standards
DATE: April 15, 2005 TO: FROM: Kellwood Suppliers Kellwood Distribution SUBJECT: Charge-backs for Violation of Packaging, Routing and Documentation Standards COPY TO: Divisional Sourcing Executives Dear
TRUMAN STATE UNIVERSITY OPHELIA PARRISH FINE ARTS CENTER ACOUSTICAL RENOVATIONS
SECTION 116143 - ACOUSTICAL CURTAINS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Rack Room Shoes VCP
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoeboxes; hang tags and other packing materials from
RETAIL EMBROIDERY: GARMENT AND HEADWEAR
RETAIL EMBROIDERY: GARMENT AND HEADWEAR 12-99 100-249 250-499 500+ Up to 5,000 stitches running charge/ea. $4.00 $3.50 $3.00 $2.50 Each additional 1,000 stitches $0.50 $0.50 $0.50 $0.50 Additional location
GCSE DESIGN AND TECHNOLOGY TEXTILES TECHNOLOGY
GCSE DESIGN AND TECHNOLOGY TEXTILES TECHNOLOGY EXAM PREPARATION 2017 YEAR 11 REVISION TESTS During the exam preparation period you will complete tests under exam conditions. We will mark these tests together
Nagda Bridge Point, Asian Highway, Mirer Bazar, Pubail -1721, Gazipur, Bangladesh. FACTORY PROFILE HIGH QUALITY TIMELY DELIVERY COMPETITIVE PRICE
Nagda Bridge Point, Asian Highway, Mirer Bazar, Pubail -1721, Gazipur, Bangladesh. FACTORY PROFILE HIGH QUALITY TIMELY DELIVERY COMPETITIVE PRICE ABOUT STYLETEX ASIA MESSAGE FROM THE OWNER & CEO Sumon
NEW DEAL LLC. [dba AGAINST ALL ODDS] VENDOR COMPLIANCE GUIDE
![NEW DEAL LLC. [dba AGAINST ALL ODDS] VENDOR COMPLIANCE GUIDE](/thumbs/82/86605189.jpg "NEW DEAL LLC. [dba AGAINST ALL ODDS] VENDOR COMPLIANCE GUIDE")
NEW DEAL LLC [dba AGAINST ALL ODDS] VENDOR COMPLIANCE GUIDE Effective January 1 st, 2017 TABLE OF CONTENTS Introduction 2 Contact and Correspondence 3 Routing Instructions 4~5 Ticketing Requirements 6
CHINA INSPECTION SERVICE CO.,LTD
Factory Audit Report 1. Factory Profile: General Information: Factory name: Website: Address: CHINA INSPECTION SERVICE Qing Xiu embroidery factory N/A Guang Zhou, Guang Dong province Date of the factory
Pre-Production Meeting & In-Line Inspections - Footwear
Pre-Production Meeting & In-Line Inspections - Footwear Best practice for private and exclusive brand footwear vendors, agents & factories preproduction meeting & inline inspections. Kohl s Department
Downloaded from
INCH-POUND January 29, 2015 COMMERCIAL ITEM DESCRIPTION PROXIMITY FIREFIGHTING PROTECTIVE ENSEMBLE The General Services Administration has authorized the use of this commercial item description for all
Test Report No. SDHL PK Date: Sep.02, 2016 Page 1 of 15
Test Report No. SDHL1608016333PK Date: Sep.02, 2016 Page 1 of 15 The following information and sample(s) was / were submitted and identified on behalf of the client as: Overall Test Result: PASS Sample
Style / modèle #028 Canevas / Caneva accessory / accessoire
Style / modèle # Canevas / Caneva accessory / accessoire 3 2 1 Measurement (cm) Tolerance (cm) O/S 1 Center length ± 1 cm 37 cm 2 Width ± 1 cm 44 cm 3 Ganse length ± 1 cm 48 cm Colorway sheet Turquoise
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT
BUREAU VERITAS / GLOBAL SOURCES SUPPLIER CAPABILITY ASSESSMENT BV Report No.: 10131840542 Assessed Factory Name Assessed Factory Address City / Country Consigner of Assessment GS Supplier / Manufacturer
1605 Prospect Street, Indianapolis, Indiana TOLL FREE: PHONE:
1605 Prospect Street, Indianapolis, Indiana 46203 TOLL FREE: 888-248--2090 PHONE: 317-634-7728 FAX: 317-634-7854 www.dancesoph.com Ordering Information Complete the enclosed order form carefully including
1 Factory Profile Human Resource Foreign Trade Capacity Production Capability Quality Control
Page 1 / 33 SUPPLIER ASSESSMENT REPORT Audit Type : Report No.: Initial Audit G093833 Client: XXX Supplier: XXX Digital Technology Co., Ltd Audited Factory: XXX Digital Technology Co., Ltd Auditor: Jian
856 Ship Notice/Manifest
856 Ship Notice/Manifest X12/V4010/856: 856 Ship Notice/Manifest Version: 1.0 Final Notes: Table of Contents 856 Ship Notice/Manifest...1 ISA Interchange Control Header...3 GS Functional Group Header...5
ARTISTIC STITCHES, INC W. Grand Avenue Chicago, Illinois Phone: Fax:
Artistic Stitches, Inc. is a full service true contract embroiderer operating 300 heads of Barudan embroidery machinery. Our goal is to offer our customers the best embroidery, pricing and service so they
Boot Barn Footwear 9277 VCP
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoeboxes, hang tags, and other packing materials from
Marking and packing check Acceptable. Take photo during the goods Subject to buyer s evaluation. Sampling test at SGS lab Acceptable
Inspection Order No. : IN-TJ-5301-12116 BOSS No: 1126376 Page No. : 1 of 11 Date of issue: Aug 31 2012 INSPECTION REPORT (non-negotiable) - Description and Quantity of Ductile pipe DN450 Commodity: - Name
Page: 1/9 Customer: Example LLC Report ID: SH16D2A Date:
Page: 1/9 Customer: Example LLC Report ID: SH16D2A Date: 2016-10-10 DISCOVER SOURCING LIMITED Qin@discoversourcing.com www. 202-09-2F-1B, 38-Debao Rd, Shanghai, China Customer: Example LLC Page: 2 / 9
TENT / SHELTER / TARPS, GLOBAL DEFECT LIST
Date Rev. N Modifications tracking 2009/09/08 1 Initial release 2016/07/14 2 Major changes 9/19/2016 3 Defects A13, B23 and D39 were added. Defect D9 was modified. 2017/1/23 4 Revision per Coleman design
SYNERGIZING FORCES FOR BUILDING CONFIDENCE
ACME INTERNATIONAL Buying, Sourcing & Inspection Company BUYER ACME INTERNATIONAL VENDOR SHIPPER SYNERGIZING FORCES FOR BUILDING CONFIDENCE 1 Company Profile We can best describe ourselves as a team of
Quality Control Procedures.
Page 1 of 8 Quality Control Procedures. Furrytails prides itself on its factory having one of the strictest quality control procedures within the Soft Toy Industry. These procedures include Safety Testing,
Bravo Platform Unpacking Guide
This guide describes how to unpack the Bravo device from the shipping carton. Depending on the order, the shipment can include additional packages for the Bravo utilities, pipetting head, computer, and
Vendor Trim and Marketing Manual. Revision Date: MAY 2013 Supersedes All Previous Label Manuals Columbus, OH
Vendor Trim and Marketing Manual Revision Date: MAY 2013 Supersedes All Previous Label Manuals Columbus, OH Trim & Marketing Manual Hello & Welcome to Lane Bryant s Vendor Trim & Marketing Manual! Lane
All vendors are required to comply with each section of the Vendor Standards Manual unless instructed otherwise by a FLE Purchase Order.
Contents Vendor compliance program... 1 Non-compliance charge back procedure... 2 FIR report... 3 Policies... 5 Over shipment policy... 5 Cancellation policy... 5 Right to reject non-conforming merchandise...