montgomery college rockville student services center student services center Pre-Bid Meeting October 5, 2016 montgomery college rockville campus

Transcription

1 montgomery college rockville October 5, 2016

2 campus context with project scope

3 new construction campus plan with project scope

4 maintain fire access to the site at all times submit phasing plan for Owner approval existing utility lines to remain operational until new lines installed limited to April-May or September-October existing Student Services Building to remain fully operational until completion of new prior to beginning excavation, complete items 1-4 water line completed by august 15, 2017 maintain access for deliveries at all times FDR alternate at end of construction phasing project phasing summary of requirements

5 phasing phase 1

6 phasing phase 2

7 phasing phase 3 (alternate)

8 access diagram

9 owner: Montgomery College owner consultants: Envelope Consultant: Wiss Janney Elstner (WJE) Systems Commissioning: Facility Dynamics Engineering (FDE) - relatively extensive testing and commissioning requirements design team: Architect: Cho Benn Holback + Associates (CBH) Associate Architect: Bohlin Cywinski Jackson (BCJ) Civil: A Morton Thomas & Associates (AMT) Landscape: Michael Vergason Landscape Architects (MVLA) Geotechnical: Schnabel Engineering Structural: A+F Engineers Mechanical/Electrical/Plumbing: James Posey Associates (JPA) AV/IT and Acoustics: The Sextant Group (TSG) Foodservice Consultant: Culinary Advisors Hardware Consultant: Frank Erbschloe (ECSI) project data - team

10 code authority (AHJ): City of Rockville construction type: IIA, fully sprinklered - primary structural frame = 1HR - bearing walls, int and ext = 1HR - floors and associated members: 1HR - roofs and associated members: 1HR - interior partitions: 0HR - smoke barriers at Lobby perimeter - non-combustible construction occupancy / use: non-separated mixed - Business (B), Assembly (A-3), Storage (S) total gross square footage: 127,275gsf - 23,000gsf to 27,500gsf per floor sustainability target: - LEED Silver required (50 points minimum) - LEED Gold possible (60 points minimum) - current potential point total: 63 - we will operate as if we are going for Gold project data - code and general construction Exterior construction: - cast-in-place and concrete masonry back-up cavity walls - brick masonry veneer (2 types) - curtainwall with fixed louver sunshading - operable casement windows within curtainwall - roofing: torch applied sbs modified bitumen - green roof: approximately 2,300 square feet - metal roof: limited at canopies - loading dock - custom rooftop AHU - high performance envelope - waterproofing coordination with concrete important - plantings, paving, site walls and site lighting Interior construction: - cementitious and intumescent spray fireproofing - metal framing with drywall primarily - acoustic requirements - smoke barrier requirements (Lobby only) - epoxy terrazzo (Lobby / corridors 1+2 and restrooms only) - wood ceiling (Lobby only) - special architectural steel and terrazzo stair (Lobby only) - carpet tile, bio-based composition tile and stained concrete - millwork (p-lam) - non-proprietary elevators - mechanical system oversized for campus usage

11 floor plan basement

12 floor plan level 1 (ground floor)

13 floor plan level 2

14 floor plan level 3

15 floor plan level 4

16 roof plan

17 view from North (North Campus Drive)

18 view from West (existing Humanities Building hidden)

19 view from East

20 view from South

21 view from South - campus connection and lawn

22 interior main entry and lobby space

23 interior 2 nd floor corridor / lounge

24 interior 3 rd / 4 th floor corridor / lounge / conference

25 B(uilding) I(nformation) M(odeling) Montgomery College + Autodesk 360