12500 TI Boulevard, MS 8640, Dallas, Texas 75243

Size: px
Start display at page:

Download "12500 TI Boulevard, MS 8640, Dallas, Texas 75243"

Transcription

1 12500 TI Boulevard, MS 8640, Dallas, Texas Add Cu as Alternative Wire Base Metal for Selected Device(s) Change Notification / Sample Request Date: 6/25/2014 To: Newark/Farnell PCN Dear Customer: The purpose of this version A is to retract devices from this change notification. The retraction is for select devices that were inadvertently included and are not affected by this change. We apologize for any inconvenience this may have caused. This is an announcement of a change to a device that is currently offered by Texas Instruments. The details of this change are on the following pages. We request you acknowledge receipt of this notification within 30 days of the date of this notice. Lack of acknowledgement of this notice within 30 days constitutes acceptance of the change. If you require samples or additional data to support your evaluation, please request within 30 days. The changes discussed within this PCN will not take effect any earlier than 90 days from the date of this notification, unless customer agreement has been reached on an earlier implementation of the change. This notification period is per TI s standard process. This notice does not change the end-of-life status of any product. Should product affected be on a previously issued product withdrawal/discontinuance notice, this notification does not extend the life of that product or change the life time buy offering/discontinuance plan. For questions regarding this notice, contact your local Field Sales Representative or the PCN Manager (PCN_ww_admin_team@list.ti.com). Sincerely, PCN Team SC Business Services Phone: +1(214) Fax: +1(214)

2 A Attachment: 1 Products Affected: The devices listed on this page are a subset of the complete list of affected devices. According to our records, these are the devices that you have purchased within the past twenty-four (24) months. The corresponding customer part number is also listed, if available. DEVICE BQ24392RSER TS3USB221ERSER TSU6111RSVR TCA6424ARGJR CUSTOMER PART NUMBER Technical details of this Product Change follow on the next page(s).

3 PCN Number: A PCN Date: 06/25/2014 Title: Add Cu as Alternative Wire Base Metal for Selected Device(s) Customer Contact: PCN Manager Phone: +1(214) Dept: Quality Services Change Type: Assembly Site Design Wafer Bump Site Assembly Process Data Sheet Wafer Bump Material Assembly Materials Part number change Wafer Bump Process Mechanical Specification Test Site Wafer Fab Site Packing/Shipping/Labeling Test Process Wafer Fab Materials Wafer Fab Process PCN Details Description of Change: Revision A is to remove select devices in the Product Affected Section (with strikethrough) and highlighted in yellow. These devices were inadvertently added and not affected by this change. Texas Instruments is pleased to announce the qualification of Cu as an additional bond wire option for devices listed in Product affected section below. Devices will remain in current assembly facility. Following identifies the material differences for the Product Affected list: Group 1 Wire material change only Group 2 Wire material and diameter change Au wire Cu Bond wire Wire dia. (Mils) Reason for Change: Continuity of supply. 1) To align with world technology trends and use wiring with enhanced mechanical and electrical properties 2) Maximize flexibility within our Assembly/Test production sites. 3) Cu is easier to obtain and stock Anticipated impact on Fit, Form, Function, Quality or Reliability (positive / negative): None. Changes to product identification resulting from this PCN: None.

4 Product Affected: Group 1 Devices that will have no change on wire diameter SN IRGCR ADS6124IRHBR CDCLVP2104RHDT TPS DRVT TRF372017IRGZR ADS4122IRGZT CDCLVP2108RGZT TPS DRVR ADS41B49IRGZR ADS4125IRGZR CDCM61001RHBT TPS DRVT CD3238RGJR ADS4125IRGZT INA216A4RSWT TPS DRVT ADS4246IRGCR ADS4126IRGZ25 PCF8574RGTR TPS DRVR TPS71745DSER ADS4126IRGZR PGA870IRHDR TPS DRVT ADS62P43IRGCR ADS4126IRGZT PGA870IRHDT TPS78101DRVT TPS720105DRVR ADS4128IRGZ25 SN RGZR TPS DRVR CDCE62005RGZR ADS4128IRGZR SN DRCR TPS DRVT TPS72015DRVR ADS4128IRGZT SN IRGZR TPS78222DRVR TCA6424ARGJR ADS4129IRGZ25 SN IRGCT TPS78222DRVT SN RGZR ADS4129IRGZR SN53003B4RGJR TPS78225DRVR TS3USB221ERSER ADS4142IRGZR THS9000DRWT TPS78225DRVT ADS62P48IRGCR ADS4142IRGZT TLV70036DSER TPS78227DRVT TLV70225DSER ADS4145IRGZ25 TLV70036DSET TPS78228DRVT CDCE72010RGCT ADS4145IRGZR TLV70225DSET TRF3710IRGZR TS3A44159RGTR ADS4145IRGZT TLV70228DSER TRF3710IRGZT TPS40304ADRCR ADS4146IRGZ25 TLV70228DSET TRF371109IRGZR ADS58C28IRGCT ADS4146IRGZR TLV70229DSER TRF371109IRGZT ADS41B29IRGZR ADS4146IRGZT TLV70229DSET TRF371125IRGZT CDCM61004RHBR ADS4149IRGZ25 TLV70233DSET TRF371135IRGZR CDCLVP2104RHDR ADS4149IRGZR TLV70236DSER TRF371135IRGZT ADS62P45IRGCT ADS4149IRGZT TLV70236DSET TRF3761-AIRHAR TS3USB221DRCR ADS41B25IRGZR TLV71210DSER TRF3761-AIRHAT ADS4229IRGCT ADS41B25IRGZT TLV71211DSET TRF3761-BIRHAR ADS4249IRGCR ADS41B29IRGZ25 TPD6E001RSFR TRF3761-BIRHAT CDCE62005RGZT ADS41B29IRGZT TPD8S009DSMR TRF3761-CIRHAT BQ24392RSER ADS41B49IRGZ25 TPS61093DSKT TRF3761-DIRHAR TPS72725DSER ADS41B49IRGZT TPS62122DRVT TRF3761-DIRHAT TUSB2551ARGTR ADS4222IRGCT TPS71709DSET TRF3761-EIRHAR CDCLVP1208RHDR ADS4225IRGC25 TPS717185DSER TRF3761-EIRHAT TPS62122DRVR ADS4225IRGCR TPS717185DSET TRF3761-FIRHAR SN IRGCR ADS4225IRGCT TPS71718DSER TRF3761-FIRHAT TPS72719DSER ADS4226IRGC25 TPS71718DSET TRF3761-GIRHAR CDCE72010RGCR ADS4226IRGCR TPS71727DSET TRF3761-GIRHAT CDCM61002RHBR ADS4226IRGCT TPS71728DSET TRF3761-HIRHAR TSU6111ARSVR ADS4229IRGC25 TPS71733DSET TRF3761-HIRHAT TUSB1105RGTR ADS4229IRGCR TPS71745DSET TRF3761-JIRHAT TSU6111RSVR ADS4242IRGCR TPS DRVR TS3A5018RSVR CDCM9102RHBR ADS4242IRGCT TPS DRVT TUSB1105RTZR ADS62P45IRGCR ADS4245IRGC25 TPS DRVT TUSB1106RTZR ADS4122IRGZR ADS4245IRGCT TPS DRVT ADS42B49IRGC25 TRF372017IRGZT ADS4246IRGC25 TPS DRVR ADS6122IRHBTG4 TLV70233DSER ADS4249IRGC25 TPS DRVT ADS6124IRHBRG4 ADS4245IRGCR ADS42B49IRGCT TPS DRVR ADS6125IRHBTG4 TS3A44159RSVR ADS58B18IRGZR TPS DRVT ADS6142IRHBTG4 ADS62P48IRGCT ADS58B18IRGZT TPS DRVT ADS61JB46IRHAR CDCLVP1212RHAR ADS58B19IRGZR TPS DRVR ADS61JB46IRHAT TPS61093DSKR ADS58B19IRGZT TPS DRVT ADS62P19IRGCR

5 TPS40303DRCR ADS58C28IRGC25 TPS DRVR ADS62P19IRGCT CDCLVP1216RGZR ADS58C28IRGCR TPS DRVT ADS62P42IRGCTG4 ADS4222IRGCR ADS6122IRHBR TPS DRVR CD3238RGJRG4 ADS42B49IRGCR ADS6123IRHBR TPS DRVT CDCE72010RGCRG4 TPS71733DSER ADS6123IRHBT TPS DRVR CDCE72010RGCTG4 TPS73401DRVR ADS6125IRHBR TPS DRVT CDCM61001RHBR/2801 ADS62P49IRGCT ADS6142IRHBR TPS DRVR CDCM61004RHBR/2801 TPS72730DSER ADS6143IRHBR TPS DRVT HPA01119DSER TCA6424RGJR ADS6143IRHBT TPS DRVR PTS3L500AERHUR TPS78228DRVR ADS6144IRHBR TPS DRVT TLV70031DSET CDCM61001RHBR ADS6144IRHBT TPS DRVR TLV70237DSER THS9000DRWR ADS6145IRHBR TPS DRVT TLV70237DSET CDCLVP2102RGTR ADS6145IRHBT TPS DRVR TPD6E001RSFRG4 TPS71727DSER ADS61JB23IRHAR TPS DRVT TPS3808G25ADRVR TPD8E003DQDR ADS61JB23IRHAT TPS72009DRVR TPS3808G25ADRVT INA216A4RSWR ADS62C15IRGCR TPS72009DRVT TPS51220RRHBR TPS DRVR ADS62C15IRGCT TPS720105DRVT TPS71709DSETG4 ADS4249IRGCT ADS62C17IRGCR TPS72010DRVT TPS71710DRVRG4 CDCM61004RHBT ADS62C17IRGCT TPS720115DRVR TPS71718DSERG4 TPS40305DRCR ADS62P15IRGC25 TPS720115DRVT TPS71728DSERG4 TPS71728DSER ADS62P15IRGCR TPS72015DRVT TPS71728DSETG4 TPS73433DRVR ADS62P15IRGCT TPS72018DRVR TPS71733DRVTG4 CDCLVP2108RGZR ADS62P22IRGCR TPS72018DRVT TPS DRVTG4 CDCM9102RHBT ADS62P22IRGCT TPS72710DSER TPS DRVTG4 TPD8F003DQDR ADS62P23IRGCR TPS72710DSET TPS DRVTG4 ADS62PF49IRGCR ADS62P23IRGCT TPS72715DSER TPS DRVTG4 CDCM61002RHBT ADS62P24IRGCR TPS72715DSET TPS DRVTG4 ADS6125IRHBT ADS62P24IRGCT TPS72725DSET TPS DRVRG4 CDCLVP1208RHDT ADS62P25IRGCR TPS72727DSER TPS DRVTG4 ADS4129IRGZT ADS62P25IRGCT TPS72727DSET TPS DRVTG4 TPS71710DRVR ADS62P28IRGCR TPS727285DSET TPS72719DSET TLV70031DSER ADS62P28IRGCT TPS72730DSET TPS78001DRVTG4 TPS40304ADRCT ADS62P29IRGCR TPS72733DSER TPS DRVRG4 TPS71733DRVT ADS62P29IRGCT TPS72733DSET TPS DRVTG4 ADS4246IRGCT ADS62P42IRGCR TPS73401DRVT TPS78101DRVTG4 TPS40305DRCT ADS62P42IRGCT TPS73418DRVR TPS78225DRVTG4 TPS DRVR ADS62P44IRGCR TPS73418DRVT TPS78227DRVTG4 ADS6122IRHBT ADS62P44IRGCT TPS73433DRVT TPS78228DRVRG4 ADS6124IRHBT ADS62P49IRGC25 TPS73501DRVR TRF3761-CIRHATG4 TPS71750DSER ADS62P49IRGCR TPS73501DRVT TS3A44159RGTRG4 TPS71750DSET ADS62PF49IRGCT TPS73525DRVR TS3A44159RSVRG4 TPS40303DRCT CDCE18005RGZR TPS73525DRVT TS3L500RHURG4 ADS62P43IRGCT CDCE18005RGZT TPS735285DRVR TUSB1105RGTRG4 TLV71210DSET CDCLVP1212RHAT TPS735285DRVT TUSB1105RTZRG4 ADS6142IRHBT CDCLVP1216RGZT TPS78001DRVT TUSB1106RTZRG4 TRF371125IRGZR CDCLVP2102RGTT TPS DRVR

6 Product Affected: Group 2 Devices that will have wire diameter change TPS62260DRVR DAC3174IRGC25 TPS71433DRVT HPA00822DRVR TPS62560DRVR DAC3174IRGCR TPS715A01DRVR TPS61165DRVR-S TPS62590DRVR DAC3174IRGCT TPS715A01DRVT TPS62240DRVRG4 TPS62290DRVR REG71050DRVT TPS79912DRVT TPS62240DRVTG4 TPS62080ADSGR TPD4S014DSQR TPS79927DRVR TPS62242DRVRG4 TPS62240DRVR TPS3808G15DRVR TPS79927DRVT TPS62242DRVTG4 TPS62562DRVR TPS3808G15DRVT TPS799285DRVR TPS62243DRVTG4 TPS61240DRVR TPS3808G18DRVR TPS799285DRVT TPS62260DRVTG4 TPS62262DRVR TPS3808G18DRVT TPS79928DRVR TPS62261DRVRG4 TPS62293DRVR TPS3808G33DRVR TPS79928DRVT TPS62261DRVTG4 TS3L500RHUR TPS3808G33DRVT TPS79933DRVT TPS62262DRVTG4 TS2PCIE412RUAR TPS3818G25DRVR ADS62C15IRGCTG4 TPS62290DRVRG4 TPS62243DRVR TPS3818G25DRVT DAC3151IRGCR TPS62290DRVTG4 TPS79933DRVR TPS62080ADSGT DAC3151IRGCT TPS62291DRVRG4 TPS62291DRVR TPS62243DRVT DAC3154IRGCR TPS62291DRVTG4 TPS79912DRVR TPS62250DRVR DAC3154IRGCT TPS62293DRVRG4 TPS62290DRVT TPS62250DRVT DAC3161IRGCR TPS62560DRVRG4 TPS62242DRVR TPS62260ADRVR DAC3161IRGCT TPS62560DRVTG4 TPS62261DRVR TPS62260ADRVT DAC3164IRGC25 TPS79912DRVTG4 TPS62291DRVT TPS62261DRVT DAC3164IRGCR TPS79927DRVTG4 TPS62260DRVT TPS62262DRVT DAC3164IRGCT TPS79928DRVRG4 TPS62590DRVT TPS62263DRVR DAC3171IRGC25 TPS79928DRVTG4 TPS62240DRVT TPS62263DRVT DAC3171IRGCR TPS79933DRVRG4 TPS62242DRVT TPS62293DRVT DAC3171IRGCT TPS79933DRVTG4 TPS61240DRVT TPS62562DRVT DAC3179IRGCR TS3USB221DRCRG4 TPS62560DRVT TPS71401DRVR DAC3179IRGCT AFE7071IRGZR TPS71401DRVT HPA00560DRVR AFE7071IRGZT TPS71433DRVR HPA00695DRVR Attributes Qualification Report UTAC (NSE): QFN, conversion to Cu-wire bond on Al-Pad devices Approved 05/29/2014 DAC5682ZIRGCR REG71050DRVR Product Attributes TPS3808G25DRVR TPS62560DRVR TS3L500RHUR Assembly Site UTAC (NSE) UTAC (NSE) UTAC (NSE) UTAC (NSE) UTAC (NSE) Package Family VQFN WSON WSON WSON WQFN Flammability Rating UL 94 V-0 UL 94 V-0 UL 94 V-0 UL 94 V-0 UL 94 V-0 Wafer Fab Supplier RFAB TSMC-WF2 FR-BIP-1 UMC-F8AB FR-BIP-1 Wafer Fab Process 1833C05X5 0.60UM-TSMC 3370A12X3 LBC7X3 ASLC10 - QBS: Qual By Similarity - Qual Device DAC5682ZIRGCR is qualified at LEVEL3-260C - Qual Device REG71050DRVR is qualified at LEVEL2-260C - Qual Devices qualified at LEVEL1-260C: TPS3808G25DRVR, TPS62560DRVR, TS3L500RHUR

7 Qualification Results Data Displayed as: Number of lots / Total sample size / Total failed Type Test Name / Condition Duration DAC5682ZIRGCR REG71050DRVR TPS3808G25DRVR TPS62560DRVR TS3L500RHUR PC PreCon Level 1 Level 1-260C /693/0 3/246/0 PC PreCon Level 3 Level 3-260C 3/495/ HAST Biased HAST, 130C/85%RH 96 Hours /215/0 AC Autoclave 121C 96 Hours 3/256/ /231/0 - Unbiased HAST UHAST 130C/85%RH 96 Hours 3/256/ TC Temperature Cycle, -65/150C 500 Cycles 3/247/ /231/0 - HTSL High Temp Storage Bake 175C 350 Hours /231/0 - HTOL Life Test, 125C 1000 Hours /76/0 ED Electrical Per Datasheet Characterization Parameters - Pass - Pass Pass MQ Manufacturability with Crater (Assembly) Check Pass MQ Manufacturability with cratercheck (Assembly) - Pass Pass Pass Pass MSL Thermal Path Integrity Level 1-260C - - 1/12/0 3/36/0 - MSL Thermal Path Integrity Level 3-260C 3/36/ Preconditioning was performed for Autoclave, Unbiased HAST, THB/Biased HAST, Temperature Cycle, Thermal Shock, and HTSL, as applicable - The following are equivalent HTOL options based on an activation energy of 0.7eV : 125C/1k Hours, 140C/480 Hours, 150C/300 Hours, and 155C/240 Hours - The following are equivalent HTSL options based on an activation energy of 0.7eV : 150C/1k Hours, and 170C/420 Hours - The following are equivalent Temp Cycle options per JESD47 : -55C/125C/700 Cycles and -65C/150C/500 Cycles Quality and Environmental data is available at TI's external Web site: Green/Pb-free Status: Qualified Pb-Free(SMT) and Green TI Qualification ID: For questions regarding this notice, s can be sent to the regional contacts shown below or your local Field Sales Representative. Location USA Europe Asia Pacific Japan PCNAmericasContact@list.ti.com PCNEuropeContact@list.ti.com PCNAsiaContact@list.ti.com PCNJapanContact@list.ti.com

12500 TI Boulevard, MS 8640, Dallas, Texas 75243

12500 TI Boulevard, MS 8640, Dallas, Texas 75243 12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of Hefei Tongfu Microelectronic Co. Ltd (HFTF) as additional Assembly and Test Site for Select Devices Change Notification / Sample Request

More information

12500 TI Boulevard, MS 8640, Dallas, Texas 75243

12500 TI Boulevard, MS 8640, Dallas, Texas 75243 12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of Hefei Tongfu Microelectronic Co. Ltd (HFTF) as additional Assembly and Test Site for Select Devices Change Notification / Sample Request

More information

12500 TI Boulevard, MS 8640, Dallas, Texas 75243

12500 TI Boulevard, MS 8640, Dallas, Texas 75243 12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20140926000 Qualification of 4211649 Mold Compound for Selected PowerPad QFP Device(s) Change Notification / Sample Request Date: 9/30/2014 To: Newark/Farnell

More information

What is and what is not changing? Primary Fab Location: Microchip Fabrication Sites (Tempe, AZ and Gresham, OR, USA)

What is and what is not changing? Primary Fab Location: Microchip Fabrication Sites (Tempe, AZ and Gresham, OR, USA) Micrel San Jose CA (SJ) to Microchip Fabrication Sites (Tempe, AZ, Gresham, OR, and Colorado Springs, CO USA) Fab Transfer of CSI05 Frequently Asked Questions (FAQ) Revision 2 May 4, 2017 Why is Microchip

More information

Quality and Reliability Report

Quality and Reliability Report Quality and Reliability Report Product Qualification MASW-007921 2mm 8-Lead Plastic Package QTR-0148 M/A-COM Technology Solutions Inc. 100 Chelmsford Street Lowell, MA 01851 Tel: (978) 656-2500 Fax: (978)

More information

Cypress Semiconductor Package Qualification Report

Cypress Semiconductor Package Qualification Report Cypress Semiconductor Package Qualification Report QTP# 041007 VERSION 1.0 September 2004 28Ld SNC, 32Ld SOIC, 28/32/36/44Ld SOJ Packages 11 mils Wafer Thickness and Saw Step Cut MSL 3, 220C Reflow Cypress

More information

Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer of SiGe Frequently Asked Questions (FAQ) March 30, 2017

Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer of SiGe Frequently Asked Questions (FAQ) March 30, 2017 Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer of SiGe Frequently Asked Questions (FAQ) March 30, 2017 Why is Microchip making this change? The Micrel 6 inch fabrication facility

More information

Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer Frequently Asked Questions (FAQ) Revision 1 October 1, 2016

Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer Frequently Asked Questions (FAQ) Revision 1 October 1, 2016 Micrel San Jose CA (SJ) to Microchip Colorado Springs CO (MCSO) Fab Transfer Frequently Asked Questions (FAQ) Revision 1 October 1, 2016 Why is Microchip making this change? The Micrel 6 inch fabrication

More information

Analog, MEMS and Sensor Group (AMS)

Analog, MEMS and Sensor Group (AMS) 05-13-2015 Report ID 2015-W20AMKOR-TRANSFER PRODUCT/PROCESS CHANGE NOTIFICATION PCN AMS/15/9324 Analog, MEMS and Sensor Group (AMS) Production transfer from Amkor Korea to Amkor Philippines for component

More information

MachXO2 Product Family Qualification Summary

MachXO2 Product Family Qualification Summary MachXO2 Product Family Qualification Summary Lattice Document # 25 106923 February 2017 1 Dear Customer, Enclosed is Lattice Semiconductor s MachXO2 Product Family Qualification Report. This report was

More information

Package Qualification Report Reliability By Design

Package Qualification Report Reliability By Design Package Qualification Report Reliability By Design Qualification Description: The information contained herein represents proof of Reliability and Performance of the Package Series listed below in accordance

More information

Change Notification Letter PCN# August 12, 2004

Change Notification Letter PCN# August 12, 2004 12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Final Notification of Qualification of New Environmentally Friendly (green) Mold Compound for TQFP/LQFP Packages Assembled at TI Philippines and TI Taiwan

More information

Qualification Report CASCADEABLE FIFOS. November 1995, QTP# Version 1.2 DEVICE DESCRIPTION MARKETING PART NUMBER. 1K x 9 Cascadeable FIFO

Qualification Report CASCADEABLE FIFOS. November 1995, QTP# Version 1.2 DEVICE DESCRIPTION MARKETING PART NUMBER. 1K x 9 Cascadeable FIFO Qualification Report November 1995, QTP# 94468 Version 1.2 CASCADEABLE FIFOS MARKETING PART NUMBER CY7C419 CY7C420/CY7C421 CY7C424/CY7C425 DEVICE DESCRIPTION 256 x 9 Cascadeable FIFO 512 x 9 Cascadeable

More information

WorkShop Audace. INSA ROUEN 8 juin 2012

WorkShop Audace. INSA ROUEN 8 juin 2012 WorkShop Audace INSA ROUEN 8 juin 2012 Global Standards for the Microelectronics Industry JEDEC standards for product level qualification Christian Gautier Content JEDEC overview Environmental reliability

More information

PROCESS CHANGE NOTIFICATION PCN1714

PROCESS CHANGE NOTIFICATION PCN1714 Revision 1.1.0 PCN Issue Date: 09/29/2017 PROCESS CHANGE NOTIFICATION PCN1714 Substrate Change for Selected Ball Grid Array Wire Bond Package Types This is not a new PCN issuance. PCN1714 Rev 1.1.0 includes

More information

JEDEC SOLID STATE TECHNOLOGY ASSOCIATION

JEDEC SOLID STATE TECHNOLOGY ASSOCIATION JEDEC STANDARD Stress-Test-Driven Qualification of Integrated Circuits JESD47G (Revision of JESD47F, December 2007) MARCH 2009 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications

More information

Qualification Report. June, 1994, QTP# Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER DEVICE DESCRIPTION. Cascadable 32K x 9 FIFO

Qualification Report. June, 1994, QTP# Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER DEVICE DESCRIPTION. Cascadable 32K x 9 FIFO Qualification Report June, 1994, QTP# 92361 Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER CY7C460 CY7C462 CY7C464 CY7C470 CY7C472 CY7C474 DEVICE DESCRIPTION Cascadable 8K x 9 FIFO Cascadable

More information

Quality and Reliability Report

Quality and Reliability Report Quality and Reliability Report Product Qualification MAAM-008819 2mm 8-Lead PDFN Plastic Package QTR-0147 M/A-COM Technology Solutions Inc. 100 Chelmsford Street Lowell, MA 01851 Tel: (978) 656-2500 Fax:

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN MMS-MMY/14/8744 Dated 21 Oct 2014 CR95HF, Redesign for improvement 1/5 PCN MMS-MMY/14/8744 - Dated 21 Oct 2014 Table 1. Change Implementation Schedule Forecasted

More information

Reliability Qualification Report

Reliability Qualification Report Reliability SUF-1000 SUF-2000 SUF-3000 SUF-4000 SUF-5000 The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions.

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN DCG-UPD/13/8217 Dated 21 Nov 2013 Standardization of assembly materials for ST PBGA (27x27 and 35x35) manufactured in ST Malta and StatsChippac Korea 1/5 PCN DCG-UPD/13/8217

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN IPD-IPC/13/7708 Dated 19 Feb 2013 VFQFPN/DFN line transfer from ST Muar (Malaysia) to ST Calamba (Philippines) 1/5 PCN IPD-IPC/13/7708 - Dated 19 Feb 2013 Table

More information

Copper Wire Bonding: the Last Frontier of Cost Savings. Bernd K Appelt Business Development ASE (U.S.) Inc. April 11, 2012

Copper Wire Bonding: the Last Frontier of Cost Savings. Bernd K Appelt Business Development ASE (U.S.) Inc. April 11, 2012 Copper Wire Bonding: the Last Frontier of Cost Savings Bernd K Appelt Business Development ASE (U.S.) Inc. April 11, 2012 Outline Introduction Fundamental Study Reliability Study Monitoring Data High Volume

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN APG-BAD/12/7546 Dated 05 Nov 2012 VIPower Products Housed in DPAK/D2PAK,PACK/P2PAK,PENTAWATT: Migration to Leadfree 1/41 PCN APG-BAD/12/7546 - Dated 05 Nov 2012

More information

Analog & MEMS Group (AMG)

Analog & MEMS Group (AMG) 10-May-2016 Report ID 2016-W18 -SOAG PRODUCT/PROCESS CHANGE NOTIFICATION PCN AMG/16/9830 Analog & MEMS Group (AMG) New material set in ST Bouskoura for General Purpose Analog Automotive grade products

More information

Content. 1. About Us. 2. OSAT Services. 3. Quality. 4. Customers. 5. Team. 6. Logistics. 7. Our USP. 8. Contact

Content. 1. About Us. 2. OSAT Services. 3. Quality. 4. Customers. 5. Team. 6. Logistics. 7. Our USP. 8. Contact v16 Nov 1, 2017 Content 1. About Us 2. OSAT Services Turnkey Solutions & Value Added services Package Portfolio Bill of Material Assembly & Test Capability Road Map Cost & Communication 3. Quality 4. Customers

More information

Anti-collapse Reflow Encapsulant Technology for FCOF. IMAPS Flip-Chip 2003, Austin TX

Anti-collapse Reflow Encapsulant Technology for FCOF. IMAPS Flip-Chip 2003, Austin TX Anti-collapse Reflow Encapsulant Technology for FCOF IMAPS Flip-Chip 2003, Austin TX Overview Background Problem Statement Development Process Timeline Anti-collapse approaches Test Methodology Results

More information

Automotive Electronic Material Challenges. Anitha Sinkfield, Delphi

Automotive Electronic Material Challenges. Anitha Sinkfield, Delphi Automotive Electronic Material Challenges Anitha Sinkfield, Delphi Automotive Electronic Material Challenges Project Update About inemi Project Participants Problem Statement Project Details Summary and

More information

IMPLEMENTATION OF A FULLY MOLDED FAN-OUT PACKAGING TECHNOLOGY

IMPLEMENTATION OF A FULLY MOLDED FAN-OUT PACKAGING TECHNOLOGY IMPLEMENTATION OF A FULLY MOLDED FAN-OUT PACKAGING TECHNOLOGY B. Rogers, C. Scanlan, and T. Olson Deca Technologies, Inc. Tempe, AZ USA boyd.rogers@decatechnologies.com ABSTRACT Fan-Out Wafer-Level Packaging

More information

Copper Wire Bonding Technology and Challenges

Copper Wire Bonding Technology and Challenges Copper Wire Bonding Technology and Challenges By Dr Roger Joseph Stierman Date: 21 & 22 October 2013 Venue: SHRDC, Shah Alam, Selangor *2 days training package RM 3,000 per pax [*] * includes hotel accommodation

More information

Product Specification JUL 14 Rev. A1

Product Specification JUL 14 Rev. A1 Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents

More information

Critical Barriers Associated with Copper Bonding Wire. William (Bud) Crockett Jr.

Critical Barriers Associated with Copper Bonding Wire. William (Bud) Crockett Jr. Critical Barriers Associated with Copper Bonding Wire William (Bud) Crockett Jr. w-crockett@ml.tanaka.co.jp May 2015 1980s, wire bonding was supposed to be replaced by tape automated bonding (TAB) In Global

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN MMS-MIC/14/8461 Dated 01 Jul 2014 STM32F2x & STM32F4x Low-speed external oscillator improvement - ref list products below 1/5 PCN MMS-MIC/14/8461 - Dated 01 Jul

More information

MATERIAL NEEDS AND RELIABILITY CHALLENGES IN AUTOMOTIVE PACKAGING UNDER HARSH CONDITIONS

MATERIAL NEEDS AND RELIABILITY CHALLENGES IN AUTOMOTIVE PACKAGING UNDER HARSH CONDITIONS MATERIAL NEEDS AND RELIABILITY CHALLENGES IN AUTOMOTIVE PACKAGING UNDER HARSH CONDITIONS Varughese Mathew NXP Semiconductors 6501 William Cannon Drive, Austin TX, USA Automotive Innovation Driven by Electronics

More information

AEC WORK SHOP SESSION KNOWN GOOD DIE / MULTI-CHIP MODULE. Daniel Vanderstraeten On Semiconductor

AEC WORK SHOP SESSION KNOWN GOOD DIE / MULTI-CHIP MODULE. Daniel Vanderstraeten On Semiconductor AEC WORK SHOP SESSION KNOWN GOOD DIE / MULTI-CHIP MODULE Banjie Bautista - Integrated Silicon Solution Inc. Pamela Finer Pericom Semiconductor Tim Haifley Altera Tom Lawler Lattice Semiconductor Nick Lycoudes

More information

Surface Mount Sense Resistors

Surface Mount Sense Resistors Resistors Surface Mount Flexible leads for thermal expansion Open-air design reduces PCB heating Values down to 1milliohm Element TCR ±2ppm/ C Zero-ohm 65A jumper version RoHS compliant All parts are Pb-free

More information

Manufacturing Strategy & Technology Roundtable

Manufacturing Strategy & Technology Roundtable Manufacturing Strategy & Technology Roundtable Kevin Ritchie Senior Vice President, Technology and Manufacturing Group Strategy Delivers Results Benefits continue to be demonstrated Lower, more stable

More information

Cree XLamp ML-B LEDs. Table of Contents. CLD-DS39 Rev 7I. Product family data sheet

Cree XLamp ML-B LEDs. Table of Contents. CLD-DS39 Rev 7I. Product family data sheet Product family data sheet CLD-DS39 Rev 7I Cree XLamp ML-B LEDs Product Description The Cree XLamp ML-B LED brings lighting-class reliability and performance to 1/4-watt LEDs. The XLamp ML-B LED expands

More information

Development of Exposed Die Large Body to Die Size Ratio Wafer Level Package Technology

Development of Exposed Die Large Body to Die Size Ratio Wafer Level Package Technology Development of Exposed Die Large Body to Die Size Ratio Wafer Level Package Technology by J. Osenbach 1, S. Emerich1, L. Golick1, S. Cate 2, M. Chan3, S.W. Yoon 3, Y.J. Lin 4 & K. Wong 5, 1LSI Corporation

More information

3D-WLCSP Package Technology: Processing and Reliability Characterization

3D-WLCSP Package Technology: Processing and Reliability Characterization 3D-WLCSP Package Technology: Processing and Reliability Characterization, Paul N. Houston, Brian Lewis, Fei Xie, Ph.D., Zhaozhi Li, Ph.D.* ENGENT Inc. * Auburn University ENGENT, Inc. 2012 1 Outline Packaging

More information

Close supply chain collaboration enables easy implementation of chip embedded power SiP

Close supply chain collaboration enables easy implementation of chip embedded power SiP Close supply chain collaboration enables easy implementation of chip embedded power SiP Gerald Weidinger, R&D Project Leader, AT&S AT & S Austria Technologie & Systemtechnik Aktiengesellschaft Fabriksgasse13

More information

Vendor Qualification Survey

Vendor Qualification Survey 1200 West 96 th St Minneapolis, MN 55431 Ph: 952-888-7900 Fax: 952-888-2719 Vendor Qualification Survey Vendor Information Company Name: Date: Address: City: Phone Number: email address: Product or Service

More information

An Innovative High Throughput Thermal Compression Bonding Process

An Innovative High Throughput Thermal Compression Bonding Process An Innovative High Throughput Thermal Compression Bonding Process Li Ming 2 September 2015 Outline Introduction Throughput improved TCB Process Liquid Phase Contact (LPC) bonding Flux-LPC-TCB under inert

More information

3D Package Technologies Review with Gap Analysis for Mobile Application Requirements. Apr 22, 2014 STATS ChipPAC Japan

3D Package Technologies Review with Gap Analysis for Mobile Application Requirements. Apr 22, 2014 STATS ChipPAC Japan 3D Package Technologies Review with Gap Analysis for Mobile Application Requirements Apr 22, 2014 STATS ChipPAC Japan T.Nishio Contents Package trends and roadmap update Advanced technology update Fine

More information

Functional Mapping. Michael Dalebout Manager of Business Services

Functional Mapping. Michael Dalebout Manager of Business Services Michael Dalebout Manager of Business Services 2 Defined Why is WECC doing it now Importance of Current Situation New Reporting Capabilities Next Steps Questions 3 4 5 Importance of 6 Rules of Procedure

More information

28nm Mobile SoC Copper Pillar Probing Study. Jose Horas (Intel Mobile Communications) Amy Leong (MicroProbe) Darko Hulic (Nikad)

28nm Mobile SoC Copper Pillar Probing Study. Jose Horas (Intel Mobile Communications) Amy Leong (MicroProbe) Darko Hulic (Nikad) 28nm Mobile SoC Copper Pillar Probing Study Jose Horas (Intel Mobile Communications) Amy Leong (MicroProbe) Darko Hulic (Nikad) Overview Introduction to IMC Copper Pillar Implementation at IMC Low force

More information

SN54155, SN54156, SN54LS155A, SN54LS156, SN74155, SN74156, SN74LS155A, SN74LS156 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS

SN54155, SN54156, SN54LS155A, SN54LS156, SN74155, SN74156, SN74LS155A, SN74LS156 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS SN54155, SN54156, SN54LS155A, SN54LS156, SN74155, SN74156, SN74LS155A, SN74LS156 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS SDLS057 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN IPG-DIS/14/8337 Dated 19 Feb 2014 Power Rectifiers Additional Assembly and Test Location in China for DPAK package 1/17 PCN IPG-DIS/14/8337 - Dated 19 Feb 2014 Table

More information

PRODUCT INFORMATION LETTER

PRODUCT INFORMATION LETTER PRODUCT INFORMATION LETTER PIL MMS-MIC/13/7803 Dated 26 Apr 2013 Addendum PIL7759 - New die revision for STM32F10x (128K, 512K) products 1/4 PIL MMS-MIC/13/7803 - Dated 26 Apr 2013 Sales Type/product family

More information

SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS

SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS Application Note AN-40-014 SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS DATE ISSUED: January 4, 2012 AN-40-014 Rev.: A M150261 (04/14/15) File: AN40014.doc Page 1 of 10 1.0 Introduction Mini-Circuits

More information

SOT-23 Reliability November 23, 1998

SOT-23 Reliability November 23, 1998 SOT-23 Reliability SOT-23 Reliability November 23, 1998 By David B. Hutchins, Senior Applications Engineer Diodes Incorporated -- www.diodes.com Introduction Diodes Incorporated has offered high-quality

More information

Subject: Motorola PRODUCT AND PROCESS CHANGE NOTIFICATION 4424

Subject: Motorola PRODUCT AND PROCESS CHANGE NOTIFICATION 4424 Subject: Motorola 4424 TITLE: PDIP20H,SDIP28/32,VMFP16/20/30/36,TSSOP24/30/36W,MFP8 ASSEMBLY AND TEST SITE TRANSFER TO MITSUI HIGH TEC. EFFECTIVE DATE: 15-MAY-99 AFFECTED CHANGE CATEGORIES Motorola Assembly

More information

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION PRODUCT/PROCESS CHANGE NOTIFICATION PCN APG-PTS/12/7486 Dated 2 Oct 212 COPPER WIRE CONVERSION ON BCD2 - PowerSO-2/36 MUAR 1/15 PCN APG-PTS/12/7486 - Dated 2 Oct 212 Table 1. Change Implementation Schedule

More information

Green Product. 2 nd level reliability of tin plated components. Dr. Marc Dittes CAT AIT PGP

Green Product. 2 nd level reliability of tin plated components. Dr. Marc Dittes CAT AIT PGP Green Product 2 nd level reliability of tin plated components Infineon Outline Experimental parameters Testboard, paste, components, T-cycling, Shear test Reflow profile SnPbAg Reflow profile SnAgCu Reliability

More information

Dr Yang Yongbo Infineon Technologies, Singapore

Dr Yang Yongbo Infineon Technologies, Singapore Die Attach Void Impact Study on IC Package Thermal Behavior with ANSYS Mechanical Dr Yang Yongbo Infineon Technologies, Singapore Biography Author Job Title Department : YANG YONGBO : Staff Engineer :

More information

Interlayer Dielectric (ILD) Cracking Mechanisms and their Effects on Probe Processes. Daniel Stillman, Daniel Fresquez Texas Instruments Inc.

Interlayer Dielectric (ILD) Cracking Mechanisms and their Effects on Probe Processes. Daniel Stillman, Daniel Fresquez Texas Instruments Inc. Interlayer Dielectric (ILD) Cracking Mechanisms and their Effects on Probe Processes Daniel Stillman, Daniel Fresquez Texas Instruments Inc. Outline Probe Optimization Why is it needed? Objective and obstacles

More information

PACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan UC2906DW NRND SOIC DW 16 40 Green (RoHS UC2906DWG4

More information

Commercial Thin Film Chip Resistor, Surface Mount Chip

Commercial Thin Film Chip Resistor, Surface Mount Chip Commercial Thin Film Chip Resistor, Surface Mount Chip PTN Actual Size 1505 These chip resistors are available in both top side and wraparound termination styles in a variety of sizes. They incorporate

More information

DUAL SCHOTTKY DIODE BRIDGE

DUAL SCHOTTKY DIODE BRIDGE UC1610 UC3610 DUAL SCHOTTKY DIODE BRIDGE SLUS339B JUNE 1993 REVISED DECEMBER 2004 FEATURES Monolithic Eight-Diode Array Exceptional Efficiency Low Forward Voltage Fast Recovery Time High Peak Current Small

More information

Data sheet acquired from Harris Semiconductor SCHS098D Revised October 2003

Data sheet acquired from Harris Semiconductor SCHS098D Revised October 2003 Data sheet acquired from Harris Semiconductor SCHS098D Revised October 2003 The CD40107B is a dual 2-input NAND buffer/driver containing two independent 2-input NAND buffers with open-drain single n-channel

More information

Wafer Level Chip Scale Package (WLCSP)

Wafer Level Chip Scale Package (WLCSP) Freescale Semiconductor, Inc. Application Note Document Number: AN3846 Rev. 4.0, 8/2015 Wafer Level Chip Scale Package (WLCSP) 1 Introduction This application note provides guidelines for the handling

More information

Advanced Analytical Techniques for Semiconductor Assembly Materials and Processes. Jason Chou and Sze Pei Lim Indium Corporation

Advanced Analytical Techniques for Semiconductor Assembly Materials and Processes. Jason Chou and Sze Pei Lim Indium Corporation Advanced Analytical Techniques for Semiconductor Assembly Materials and Processes Jason Chou and Sze Pei Lim Indium Corporation Agenda Company introduction Semiconductor assembly roadmap challenges Fine

More information

Quarterly Reliability Report

Quarterly Reliability Report Quarterly Reliability Report Q1 216 Data by Process Technology Publication Number Reliabilty_Report_Q1216 Revision 1 Issue Date April 15, 216 Table of Contents 1. Introduction... 3 2. QMP Tests and Test

More information

SCV Chapter, CPMT Society, IEEE September 14, Voids at Cu / Solder Interface and Their Effects on Solder Joint Reliability

SCV Chapter, CPMT Society, IEEE September 14, Voids at Cu / Solder Interface and Their Effects on Solder Joint Reliability Voids at / Solder Interface and Their Effects on Solder Joint Reliability Zequn Mei, Mudasir Ahmad, Mason Hu, Gnyaneshwar Ramakrishna Manufacturing Technology Group Cisco Systems, Inc. Acknowledgement:

More information

Copyright 2009 Year IEEE. Reprinted from 2009 Electronic Components and Technology Conference. Such permission of the IEEE does not in any way imply

Copyright 2009 Year IEEE. Reprinted from 2009 Electronic Components and Technology Conference. Such permission of the IEEE does not in any way imply Copyright 2009 Year IEEE. Reprinted from 2009 Electronic Components and Technology Conference. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Institute of Microelectronics

More information

Chevron Richmond Refinery 72 Hour Follow-Up Notification Report Form

Chevron Richmond Refinery 72 Hour Follow-Up Notification Report Form Patricia Roberts, P.E. PSM, OE Manager Health, Environment & Safety Chevron Products Company P. O. Box 1272 Richmond, CA 94802-0272 Tel 510 242 3887 Fax 510 242 5353 PLMI@chevron.com 1/3/2017 Mr. Randall

More information

TSV Processing and Wafer Stacking. Kathy Cook and Maggie Zoberbier, 3D Business Development

TSV Processing and Wafer Stacking. Kathy Cook and Maggie Zoberbier, 3D Business Development TSV Processing and Wafer Stacking Kathy Cook and Maggie Zoberbier, 3D Business Development Outline Why 3D Integration? TSV Process Variations Lithography Process Results Stacking Technology Wafer Bonding

More information

Supply Chain Management and Manufacturing Strategies for Supply Assurance

Supply Chain Management and Manufacturing Strategies for Supply Assurance Supply Chain Management and Manufacturing Strategies for Supply Assurance FTF-AUT-F0354 Michelle Marr, Ryan Dohse Mr. Herbert Nebl - Daimler APR.2014 TM External Use Introductions Freescale and Daimler

More information

Rated (VDC) 3 = 25 5 = 50 1 = = 200 A = 250 C0G

Rated (VDC) 3 = 25 5 = 50 1 = = 200 A = 250 C0G Axial Leaded Multilayer Ceramic Capacitors Aximax, 400, Conformally Coated, C0G Dielectric, 25 250 VDC (Commercial Grade) Overview KEMET s Aximax conformally coated axial leaded ceramic capacitors in C0G

More information

Liquid Optically Clear Adhesive for Display Applications

Liquid Optically Clear Adhesive for Display Applications Liquid Optically Clear Adhesive for Display Applications Daniel Lu, PhD Technical Director Henkel Corporation LOCTITE Liquid Optically Clear Adhesives (LOCA) Cover lens LOCA Touch sensor LOCA LCD 2 LOCA

More information

Statement of Work (SOW) inemi MEMS Technology MEMS Reliability Methodologies Project (Inertial Sensors)

Statement of Work (SOW) inemi MEMS Technology MEMS Reliability Methodologies Project (Inertial Sensors) Statement of Work (SOW) inemi MEMS Technology MEMS Reliability Methodologies Project (Inertial Sensors) Version #2.1 Date: November 1, 2012 Project Leader: TBD Co-Project Leader: TBD inemi Support Staff:

More information

Chips Face-up Panelization Approach For Fan-out Packaging

Chips Face-up Panelization Approach For Fan-out Packaging Chips Face-up Panelization Approach For Fan-out Packaging Oct. 15, 2015 B. Rogers, D. Sanchez, C. Bishop, C. Sandstrom, C. Scanlan, TOlson T. REV A Background on FOWLP Fan-Out Wafer Level Packaging o Chips

More information

Cu Pillar Interconnect and Chip-Package-Interaction (CPI) for Advanced Cu Low K chip

Cu Pillar Interconnect and Chip-Package-Interaction (CPI) for Advanced Cu Low K chip EPRC 12 Project Proposal Cu Pillar Interconnect and Chip-Package-Interaction (CPI) for Advanced Cu Low K chip 15 th Aug 2012 Page 1 Introduction: Motivation / Challenge Silicon device with ultra low k

More information

"ewlb Technology: Advanced Semiconductor Packaging Solutions"

ewlb Technology: Advanced Semiconductor Packaging Solutions "ewlb Technology: Advanced Semiconductor Packaging Solutions" by Sharma Gaurav@, S.W. Yoon, Yap Yok Mian, Shanmugam Karthik, Yaojian Lin, Pandi C. Marimuthu and Yeong J. Lee* STATS ChipPAC Ltd. 5 Yishun

More information

Data sheet acquired from Harris Semiconductor SCHS287B Revised January 2004

Data sheet acquired from Harris Semiconductor SCHS287B Revised January 2004 Data sheet acquired from Harris Semiconductor SCHS287B Revised January 2004 The RCA CD54/74AC240, CD54/74AC241, and CD54/74AC244 and the CD54/74ACT240, CD54/74ACT241, and CD54/74ACT244 3-state octal buffer/line

More information

Table of Contents. Quality & Reliability Handbook. Page 2

Table of Contents. Quality & Reliability Handbook. Page 2 Table of Contents Introduction 4 Quality System 6 Introduction to Reliability & Quality Methods 7 Customer Process Change Notification 12 Supplier Quality Process 13 Failure Analysis 14 Reliability Data

More information

Supplier Response (CHD Cu wire) FSL-TJN-FM S9S08SG32E1xTG/ SG16E1xTG - MC9S08SG32. Item Name. 2. Supplier s Part Number/Data Sheet:

Supplier Response (CHD Cu wire) FSL-TJN-FM S9S08SG32E1xTG/ SG16E1xTG - MC9S08SG32. Item Name. 2. Supplier s Part Number/Data Sheet: 2. Supplier s Part Number/Data Sheet: Supplier Response (CHD Cu wire) S9S08SG32E1xTG/ SG16E1xTG - Supplier Response (CHD/ Au wire) S9S08SG32E1xTG/ SG16E1xTG - a. Facility name/plant #: No.15, Xing Hua

More information

WF6317. A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering

WF6317. A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering WF637 A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering Low viscosity and high tacking power stabilize ball holding force and ensures excellent solder wettability Easy

More information

A Mechanism-Based Methodology for Processor Package Reliability Assessments

A Mechanism-Based Methodology for Processor Package Reliability Assessments A Mechanism-Based Methodology for Processor Package Reliability Assessments Nicholas P. Mencinger, Assembly Technology Development Quality and Reliability, Intel Corp. Index words: package, certification,

More information

Circular Connectors Conforming to JIS C 5432

Circular Connectors Conforming to JIS C 5432 Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings

More information

SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS

SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS SDLS111 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication

More information

Mixed Pitch BGA (mpbga) Packaging Development for High Bandwidth-High Speed Networking Devices

Mixed Pitch BGA (mpbga) Packaging Development for High Bandwidth-High Speed Networking Devices Mixed Pitch BGA (mpbga) Packaging Development for High Bandwidth-High Speed Networking Devices by John Savic*, Mohan Nagar*, Weidong Xie*, Mudasir Ahmad*, David Senk*, Anurag Bansal* *Cisco Systems Nokibul

More information

PCN Tracking Number BLBF39 - Mold Compound Change

PCN Tracking Number BLBF39 - Mold Compound Change CIRCUIT PROTECTION PRODUCTS Bourns Manufacturers Representatives Corporate Distributor Product Managers Americas Sales Team Asia Sales Team Europe Sales Team TO-220 Packaged Transistor, Thyristor & Overvoltage

More information

Subject: Motorola PRODUCT DISCONTINUANCE 4413 TITLE: END OF LIFE FOR SPECIFIC MC74HC/TXXX DEVICE TYPES AFFECTED CHANGE CATEGORIES

Subject: Motorola PRODUCT DISCONTINUANCE 4413 TITLE: END OF LIFE FOR SPECIFIC MC74HC/TXXX DEVICE TYPES AFFECTED CHANGE CATEGORIES Subject: Motorola 4413 TITLE: END OF LIFE FOR SPECIFIC MC74HC/TXXX DEVICE TYPES LAST BUY DATE: 31-JUL-1999 LAST SHIP DATE: 31-JAN-2000 AFFECTED CHANGE CATEGORIES AFFECTED PRODUCT DIVISIONS GENERAL PURPOSE

More information

Global Test solutions Conception and production of probe cards for testing microchips

Global Test solutions Conception and production of probe cards for testing microchips Global Test solutions Conception and production of probe cards for testing microchips All Technologies Synergie Cad Probe developed differents solution of test, it is became a leader in the design and

More information

Silicon Labs Quality and Operations Overview N O V E M B E R 2017

Silicon Labs Quality and Operations Overview N O V E M B E R 2017 Silicon Labs Quality and Operations Overview N O V E M B E R 2017 Content Corporate Overview Development Process Qualification Process Manufacturing Process Supplier/Technology Selection Strategy, Supply

More information

nicrom e l e c t r o n i c

nicrom e l e c t r o n i c G E N E R A L High Performance Thick Film Resistors C A T A L O G 3 Nicrom Electronic Via Roncaglia CH - 6883 Novazzano SWITZERLAND Phone : ++4 () 9 68 99 86 Fax : ++4 () 9 68 99 86 info@nicrom-electronic.com

More information

System Level Effects on Solder Joint Reliability

System Level Effects on Solder Joint Reliability System Level Effects on Solder Joint Reliability Maxim Serebreni 2004 2010 Outline Thermo-mechanical Fatigue of solder interconnects Shear and tensile effects on Solder Fatigue Effect of Glass Style on

More information

Test Flow for Advanced Packages (2.5D/SLIM/3D)

Test Flow for Advanced Packages (2.5D/SLIM/3D) 1 Test Flow for Advanced Packages (2.5D/SLIM/3D) Gerard John Amkor Technology Inc. Gerard.John@amkor.com 2045 East Innovation Circle, Tempe, AZ 85284, USA Phone: (480) 821-5000 ADVANCED PACKAGE TEST FLOW

More information

Rockwell R RF to IF Down Converter

Rockwell R RF to IF Down Converter Construction Analysis Rockwell R6732-13 RF to IF Down Converter Report Number: SCA 9709-552 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780

More information

Hitachi Anisotropic Conductive Film ANISOLM AC-7106U

Hitachi Anisotropic Conductive Film ANISOLM AC-7106U HITACHI CHEMICAL DATA SHEET Hitachi Anisotropic Conductive Film ANISOLM AC-7106U 1. Standard Specification, Bonding and Storage Conditions, Reparability, and Characteristics... 1 Page 2. Precautions in

More information

FLIP CHIP CHIP ON BOARD SMT ENGINEERING OPTO PACKAGING SUPPLY CHAIN MANAGEMENT TESTING YOUR INNOVATIVE TECHNOLOGY PARTNER PRODUCTION CONCEPT

FLIP CHIP CHIP ON BOARD SMT ENGINEERING OPTO PACKAGING SUPPLY CHAIN MANAGEMENT TESTING YOUR INNOVATIVE TECHNOLOGY PARTNER PRODUCTION CONCEPT YOUR INNOVATIVE TECHNOLOGY PARTNER CHIP ON BOARD OPTO PACKAGING PROCESS DEVELOPMENT CONCEPT FLIP CHIP ENGINEERING TESTING PRODUCTION SMT SUPPLY CHAIN MANAGEMENT PROTOTYPES HIGH-PRECISION ASSEMBLY OF MICRO-

More information

Hitachi Anisotropic Conductive Film ANISOLM AC-8955YW. Issued 2007/03/30

Hitachi Anisotropic Conductive Film ANISOLM AC-8955YW. Issued 2007/03/30 Hitachi Chemical Data Sheet Hitachi Anisotropic Conductive Film ANISOLM AC-8955YW Issued 27/3/3 1. Standard specification, bonding condition, storage condition and characteristic...1 2. Precautions in

More information

ONE of the aspects of the continuous miniaturization in

ONE of the aspects of the continuous miniaturization in IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, VOL. 28, NO. 3, SEPTEMBER 2005 499 SMT-Compatibility of Adhesive Flip Chip on Foil Interconnections With 40-m Pitch Hans de Vries, Jan van Delft,

More information

Thermal and mechanical reliability tests of plastic core solder balls

Thermal and mechanical reliability tests of plastic core solder balls Thermal and mechanical reliability tests of plastic core solder balls Author: Maaike M. V. Taklo Company: SINTEF Email: mvi@sintef.no WS on 3D SiP, ESREF 2012 Cagliari, Italy, October 1st, 2012 Page 1

More information

YOUR Strategic TESTING ENGINEERING CONCEPT SMT FLIP CHIP PRODUCTION OPTO PACKAGING PROCESS DEVELOPMENT CHIP ON BOARD SUPPLY CHAIN MANAGEMENT

YOUR Strategic TESTING ENGINEERING CONCEPT SMT FLIP CHIP PRODUCTION OPTO PACKAGING PROCESS DEVELOPMENT CHIP ON BOARD SUPPLY CHAIN MANAGEMENT YOUR Strategic TECHNOLOGY PARTNER Wafer Back-End OPTO PACKAGING PROCESS DEVELOPMENT CONCEPT FLIP CHIP PROTOTYping ENGINEERING TESTING SMT PRODUCTION CHIP ON BOARD SUPPLY CHAIN MANAGEMENT Next Level 0f

More information

Electrical Protection Methods and Devices SAMPLE. Learner Workbook Version 1. Training and Education Support Industry Skills Unit Meadowbank

Electrical Protection Methods and Devices SAMPLE. Learner Workbook Version 1. Training and Education Support Industry Skills Unit Meadowbank Electrical Protection Methods and Devices Learner Workbook Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5635 Table of Contents Introduction... 5 1. Protection

More information

BOARD LEVEL ASSEMBLY AND RELIABILITY CONSIDERATIONS FOR QFN TYPE PACKAGES

BOARD LEVEL ASSEMBLY AND RELIABILITY CONSIDERATIONS FOR QFN TYPE PACKAGES BOARD LEVEL ASSEMBLY AND RELIABILITY CONSIDERATIONS FOR QFN TYPE PACKAGES Ahmer Syed and WonJoon Kang Amkor Technology, Inc. 1900 S. Price Road Chandler, Arizona ABSTRACT There is a strong interest in

More information

SOLDER JOINT RELIABILITY TEST SUMMARY

SOLDER JOINT RELIABILITY TEST SUMMARY Project Number: SJR Tracking Code: TC0623-SEAF-SJR-1059 Requested by: Jeremy Wooldridge Date: 05/20/2008 Product Rev: D (SEAF), C (SEAM) Part #: SEAF-50-5.0-S-10-2-A/ SEAM-50-2.0-S-10-2-A SEAF-50-6.5-S-10-1-A/

More information

Parameter Symbol Value Unit. Operating Temperature Top -40 To +100 C. Storage Temperature Tstg -40 To +120 C. Parameter Symbol Value Unit

Parameter Symbol Value Unit. Operating Temperature Top -40 To +100 C. Storage Temperature Tstg -40 To +120 C. Parameter Symbol Value Unit PRELIMINARY SPEC Part Number: KT-3228ZG10ZS-RV Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Absolute Maximum Ratings at TA = 25 C Parameter Symbol Value Unit

More information