NAVI MUMBAI MUNICIPAL CORPORATION. Plot No.1& 2, Sect.15A, C.B.D., Belapur, Navi Mumbai. E-TENDER CITY ENGINEER DEPARTMENT

Transcription

1 NAVI MUMBAI MUNICIPAL CORPORATION Plot No.1& 2, Sect.15A, C.B.D., Belapur, Navi Mumbai. ETENDER CITY ENGINEER DEPARTMENT NMMC/CITY ENGINEER/399(15) / Tender For The Work Of Repairs to gutter and pathway near Dilip Harijan House at Shankarwadi Area in Ward no.25, Ghansoli. NMMC Stage Vendor Stage Start Date and time Release of Tender 30/11/ a.m. 30/11/2018 Tender Download a.m. _30/11/2018 Bid Preparation a.m. Superhash Generation 10/11/2018 & Bid Lock p.m. Control Transfer 11/12/2018 of Bid p.m. Envelope 1 opening Expiry Date & Time 10/12/ /12/ /12/ /12/ /12/ /12/2018 (If possible) at p.m. Envelope 2 Opening Tender Price 14/12/2018 (If possible) Rs. 560/ (NonRefundable) Navi Mumbai Municipal Corporation Plot No.1& 2, Sect.15A, C.B.D., Belapur, Navi Mumbai,.

2 Schedule A Note : All The Contractors May Note That Enrollment With Nmmc Is Compulsory. Sealed Tenders In B1 Form On Department Design Are Invited For The Following Work, From Contractors Registered In Appropriate Class, By Public Works Department Or CIDCO Ltd. From Class VIII And Above Category With Adequate Experience Of Similar Works And Will Be Received In Sealed Covers, Addressed To The Commissioner, Navi Mumbai Municipal Corporation In His Office Upto Hours On 14/12/2018 Blank Tender And Any Other Information Will Be Available From The Reception, Nmmc, Plot No.1& 2,Sect.15A, C.B.D., Belapur, Navi Mumbai, On All Working Days Except Sundays And Public Holidays Declared By Government Of Maharashtra, During Working Hours 30/11/2018 To 10/12/2018 On Payment Of Cost Of Each Tender Form Mentioned Below. 1. Name Of work Repairs to gutter and pathway near Dilip Harijan House at Shankarwadi Area in Ward no.25, Ghansoli. 2. Estimated Cost Of Work Rs. 4,18,012/ 3. Engineers For This Work Executive Engineer (Ghansoli) Deputy Engineer (Gh.) 4. Period Of Sale Of Tender Documents. From 30/11/2018 To 10/12/2018 during Office Hours From The Reception, Nmmc, C.B.D., Belapur, Navi Mumbai. 5. Cost Of Each Tender Form Rs.560/ To Be Paid online in the form of ECS/RTGS/NEFT In Favour Of Navi Mumbai Municipal Corporation.. 6. Earnest Money Rs. 4,200/ To Be Paid online in the form of ECS/RTGS/NEFT Fixed EMD Certificated is not. allowed 7. PreTender Conference Will Be Held On Nil At Hrs. At C.B.D.,Navi Mumbai In The Conference Hall 2 nd Floor. 8. Last Date Of Receipt Of Tender _14/12/2018 Up To Hours 9. Probable Date And Time Of Opening Date 14/12/2018 _ At Hour Of Tender. (If Possible)

3 10. Eligibility Registration Turn Over Class VIII With Pwd Or Is Equivalent Class With Cidco And Upto ( Rs lacs.) I) Average Annual Financial Turnover During The Last Three Years, ending 31 st March Of The Previous Financial Year, should Be At Least 100% Of The Estimated Cost. Every Year it should be equal to the estimated cost. (i.e. Rs. 4,18,012/) The net worth should be positive. Ii) Experience Of Having Successfully Completed Similar Works During Last 7 Years Ending Last Day Of Month Previous To The One In Which Applications Are Invited Should Be Either Of The Following. A) Three Similar Completed Works Costing Not Less Than The Amount Equal To 40% Of The Estimated Cost. (i.e.rs. 1,67,205/) Or B) Two Similar Completed Works Costing Not Less Than The Amount Equal To 50% Of The Estimated Cost. (i.e.rs. 2,09,006/) Or C) One Similar Completed Works Costing Not Less Than The Amount Equal To 100% Of The Estimated Cost. (i.e.rs. 4,18,012/) Qualified Personnel Equipment Required One Civil Engineers Having Minimum Experience Of Three Years. Concrete Mixer, Needle Vibrator Certification The Company Having Iso 9001, (Version 2000) Certificate, Will Be Preferred. Joint Venture Is Not Allowed. No Relationship With Corporators See Clause 12 Of Detailed Tender Notice 11. Validity Period The Offer Of The Contractor Shall Remain Valid For 120 Days From The Date Of Opening Of Tender. 12. Initial Security Deposit Rs. 12,540/ (3.00%) AND Further Security Deposit, Rs. 8,360/ (2.00%) To Be Deducted From Bills.

4 13. Completion Period 04 Months 1. Contract As A Whole Period Of Completion 04 Months ** 2. Part Or Groups Of Items (I) As A Whole Work (I) 04 Months (Ii) As Per Approved Bar Chart 14. Percentage To Be Charges As Supervision Charges For The Work Got Executed Through Other Means Percent. 15. Defects Liability Period 1 year 16. Others : Price Variation clause. No Price Variation Clause applicable. 17. The agency will have to furnish an additional 1 % Security Deposit quoted by it below 10% and in case the agency quotes 14% below the cost put to tender, it will have to furnish an additional security deposit of (14%) (10%) = 4% i.e. (1%) + (4% ) = 5% in the form of Bank Guarantee of any Govt. Bank or Schedule Bank having MICR and IFSC Code in the name of concern authority. The validity of Bank guarantee having should be more than 1 month upto defect liability period of works from the date of issue (For detail Please refer the GR No. /2016/..2/.2.01/4/2017) For online Tender, The Agency Should upload the Scan Copy of Bank guarantee in Financial bid 18. Tenderer/ Bidder should submit Affidavit and Undertaking in Requisite format on Rs 100/ Stamp Paper and All Scheduled in prescribed format and every document should be self attested. 19. Tenderer has to submit the bid considering Circular of Government of Maharashtra, Finance Department, No. ज एसट 2017 /..81/क र ध न1 द.19/08/2017 regarding applicability of GST from 1 st July, The GST Amount i.e.12% will be paid on work done amount at the time of bill.

5 Quantity Navi Mumbai Municipal Corporation. Name Of Work: Repairs to gutter and pathway near Dilip Harijan House at Shankarwadi Area in Ward no.25, Ghansoli. Tender Notice No. 399(15) / SCHEDULE B Description of Item Rate in Rs. Unit Amount in Rs Item No. 1 : Excavation for foundation in earth soil of all types sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and Cu Meter strutting etc. complete. Lift upto 1.5 m Item No. 2 : Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres beyond the building area and stacking and spreading as directed dewatering preparing the bed for the Cu Meter foundation and necessary back filling ramming watering including shoring and strutting etc complete (Lift upto 1.5m Item No. 3 : Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum,ramming, Cu Meter watering including shoring and strutting etc. complete (lift upto 1.5m) Item No. 4 : Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering...etc. complete Cu Meter Item No. 5 : Providing and laying Cast in situ/ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/v.s.i. quality Artificial Sand Cu Meter Item No. 6 : Providing and laying Cast in situ/ready Mix cement concrete M 30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/v.s.i. quality Artificial Sand Cu Meter

6 8.70 Item No. 7 : Providing and laying Cast in situ/ready Mix cement concrete in M30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing lete.(excluding reinforcement and structural Cu Meter steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/v.s.i. quality Artificial Sand 3.85 Item No. 8 : Providing and laying Cast in situ/ready Mix cement concrete M 30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/v.s.i. quality Artificial Sand Cu Meter Item No. 9 : Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile 1.68 caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete M.T Item No. 10 : Providing and fixing M20 grade RCC cover (1.00x1.00x0.075) with beam as per detailed drawings and designs, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (including steel reinforcement) etc. complete Sq Meter Item No. 11 : Disposal of excavated material upto a lead of 5.0 km...etc complete Cu Meter Total Rs Say Rs Total (Contractors Quoted percentage (+/) (In Words ) Quoted Amount Rs. (In Words Signature of Tenderer No. of Corrections Signature Executive Engineer 6