LITE-ON SEMICONDUCTOR CORP. DISCRETE DIVISION LITE ON DISCRETE DIVISION. Product Information. Shanghai Seefull

Size: px
Start display at page:

Download "LITE-ON SEMICONDUCTOR CORP. DISCRETE DIVISION LITE ON DISCRETE DIVISION. Product Information. Shanghai Seefull"

Transcription

1 Product Information

2 CONTENT PRODUCT OFFERING CHIP CONSTRUCTION PRODUCT STRUCTURE DIAGRAM PART NUMBER MATRIX OUTLINE DRAWING

3 Product Offering Diodes & Rectifiers Bridge Rectifiers Schottky Rectifiers Zeners & TVS

4 Diodes & Rectifier Product Electrical Category Type V BR (V RRM ) V F t rr * Bridge Rectifiers 50V-1000V 0.95V-1.3V 1us-2us Std Recovery 50V-1000V 1.0V 1us-2us Fast Recovery 50V-1000V 1.2V 100ns-500ns Ultra Fast 50V-1000V 1.35V-1.75V 50ns-75ns Super Fast 50V-600V 0.8V-1.2V 25ns-35ns Schottky 20V-100V 0.4V-0.8V <10ns Zener 2.75V-180V - - TVS 5V-400V - - *us = 10-6 (micro) seconds ns = 10-9 (nano) seconds

5 Diode & Rectifier Product Package Category Package Type STD Fast Recovery Ultra Fast Super Fast Bridge SKY TVS / Zener O/J GPP O/J GPP O/J GPP O/J GPP O/J GPP Axial Lead X X X X X X X X X X Bridge Packages X X SMD X X X X X X TO-220 X X TO-3P X O/J = Open Junction GPP = Glass Passivated Package SKY = Schottky TVS = Transient Voltage Suppressor

6 OPEN JUNCTION CROSS SECTION STRUCTURE NI Silicon Rubber P+ N N+ NI

7 GPP CROSS SECTION STRUCTURE NI LTO GLASS SIPOS P+ N N+ NI

8 Silicon Rubber CHIP STRUCTURE COMPARISON Open Junction Glass Pass. Pellet NI P+ N N+ NI Open Junction Silicon rubber passivated Chemical etching junction ADVANTAGE Easy junction coating Good mech. yield Lower MFG. cost Easy to cut through DISADVANTAGE Unstable leakage current Unstable Hi-rel performance Glass NI P+ N N+ NI PhotoGlass passivated LPCVD SIPOS & LTO ADVANTAGE Good MESA corner protection Stable Hi-rel performance High electrical yield DISADVANTAGE Lower mech. Yield Higher leakage current Higher MFG. Cost LTO SIPOS/ MTO

9 SCHOTTKY CROSS SECTION STRUCTURE Passivation Seal Top Metal(Ti-Ni-Au) Guard Ring Nityide Passivation P+ N P+ N-Epi N+ N+ Substrate Back Metal (Al)

10 TVS / ZENER CHIP STRUCTURE A.Uni-Directional: Top Side Contact Area Glass Passivation Layer Backside Metalization B.Bi-Directional: Top Side Contact Area Glass Passivation Layer Back Side Contact Area

11 Open Junction Rectifier Internal Structure Diagram Exposed P-n junction Low cost Excellent for applications where environments are controlled or broad temperature excursions are not required ANODE NI P+ N N+ NI Open Junction Chip Solder Cu Lead Open Junction Dice Molding Compound CATHODE Silicone Rubber (for Passivation) Solder Preform

12 LITE ON Glass Passivated Rectifier Internal Structure Diagram Sealed junction to minimize contamination Minimum price differential over open junction in bridge rectifiers Excellent for higher reliability applications (extreme temperature excursions, high humidity, exposed environment) Automotive Ballasts Monitors ANODE Cu Lead NI NI P+ N N+ Glass Molding Compound Solder CATHODE LTO SIPOS/ MTO Glass Passivated Dice GPP: The edge of the junction is passivated with glass rather than oxide to enhance high-temperature performance Solder Preform

13 Schottky Rectifier Internal Structure Diagram Metal/silicon barrier with epitaxial N-layer results in a barrier lowering called the Schottky effect Fastest reverse recovery time (t rr ) with the lowest forward voltage (V F ) Excellent for battery operated equipment Front Side Metal ANODE Cu Lead Guard Ring P+ P+ N N+ Schottky Diode Chip Schottky Barrier Dice Molding Compound CATHODE SiO 2 N-EPI N-Substrate Solder Preform

14 SMD CONSTRUCTION DIAGRAM SOLDER PREFORM MOLDING COMPOUND CLIP DICE LEAD FRAME

15 TO-220 CONSTRUCTION DIAGRAM MOLDING COMPOUND DICE PIN MOLDING COMPOUND SCHOTTKY DICE CLIP SOLDER WAFER

16 TO-3P CONSTRUCTION DIAGRAM MOLDING COMPOUND SCHOTTKY DICE CLIP MOLDING COMPOUND CLIP SCHOTTKY DICE

17 Focus Products & Packages Product Summary Highlights SMA / SMB / SMC / D 2 -PAK Axial (Schottky, TVS, GPP) GPP Bridge Rectifiers TO-220 & TO-3P (Schottky, & Super Fast)

18 Standard Recovery Rectifiers Leaded to Surface Mount Crosses O/J TYPE Axial Leaded Surface Mount Io(A) T-1 A-405 DO-41 DO-15 DO-201AD R-6 MELF SMA SMB SMC 1N4001L N L 1.5 1N5391S- 5399S 1N LT LT2A N LT6A LT10A01-07 GPP TYPE Io(A) Axial Leaded Surface Mount T-1 A-405 DO-41 DO-15 DO-201AD R-6 MELF SMA SMB SMC 1.0 D1G-D7G 1N4001GL- 1N4001G- 4007GL 4007G SM S1J-S1M S1AB-S1MB 1.5 LT1501G- 1507G 2.0 LT2A01G-07G S2AA-S2MA S2A-S2M 3.0 1N5400G- 5408G S3AB-S3MB S3A-S3M 5.0 S5AC-S5MC

19 Fast Recovery Rectifiers Leaded to Surface Mount Crosses O/J TYPE Io(A) Axial Leaded Surface Mount A-405 DO-41 DO-15 DO-201AD R-6 SMA SMB SMC 1.0 1N4933L- 1N L PR S PR1501S- PR PR PR PR GPP TYPE Io(A) Axial Leaded Surface Mount A-405 DO-41 DO-15 DO-201AD R-6 SMA SMB SMC 1.0 1N4933GL- 1N4933G- RS1AB- RS1A-RS1M 4937GL 4937G RS1MB 1.5 PR1501GS- PR1501G- 1507GS 1507G G PR2001G- RS2A-RS2M 3.0 PR3001G- 3007G RS3AB- RS3MB RS3A-RS3M

20 Ultra Fast & Super Fast Recovery Rectifiers Leaded to Surface Mount Crosses O/J TYPE Axial Leaded Surface Mount Io(A) DO-41 DO-15 DO-201AD TO-220AC TO-220AB SMA SMB SMC D2PAK UF UF1001M-1007M UF1501S- UF UF1507S UF1501M- UF UF2001M- UF UF3001M- GPP TYPE Axial Leaded Surface Mount Io(A) DO-41 DO-15 DO-201AD TO-220AC TO-220AB SMA SMB SMC D2PAK UG UG1001M-1007M SF10BG-10MG MUR UG UG2001M-2007M SF20BG-20MG UG UG3001M-3007M SF30BG-30MG 4.0 SF40BG-40MG US1A-US1M ES1A-ES1M FS1A-FS1J MURS ES2AA-ES2GA ES2A-ES2M FS2A-FS2J ES3AB-ES3MB ES3A-ES3M FS3A-FS3J 5.0 SF50BG-50MG STPR502D-506D

21 Ultra Fast & Super Fast Recovery Rectifiers (Cont.) Leaded to Surface Mount Crosses GPP TYPE Io(A) Axial Leaded Surface Mount DO-41 DO-15 DO-201AD TO-220AC TO-220AB SMA SMB SMC D2PAK 6.0 STPR610CT-620CT 8.0 STPR810D-820D STPR1505D- 1520D STPR1010CT- 1020CT STPR1610CT- 1640CT STPR2005CT- 2020CT MURB1610CT- 1620CT

22 Schottky Rectifiers (Cont.) Leaded to Surface Mount Crosses I O (A) Axial Leaded To-Bridge Surface Mount DO-41 DO-15 DO-201AD TO-220AC TO-220AB TO-3P MELF SMA SMB SMC D 2 -PAK 1N SB SB N SB N5817M-19MB B120B-1100LB B220A-260A B B320A-360A B320B-360B B SB SBL B520C-560C 7.5 MBR MBR SBL MBR SBL MBR1030CT-10100CT SBL1030CT-1060CT 15.0 MBR1530CT-1560CT MBRB1530CT-1545CT MBR SBL SBL1630CT-1660CT MBR2030CT-20100CT SBL2030CT-2060CT SBL1630PT-1660PT SBL2030PT-2060PT MBR3030PT-3060PT SBL3030PT-3060PT 40.0 MBR4030PT-4060PT 60.0 MBR6030PT-3045PT SBL3030PT-3040PT

23 GPP Bridge Rectifiers Glass Passivated (GPP) I0(A) HDDF DF WOG KBP KBJ GBU GBJ GBPC-W 0.8 HD DF005M-10M DF005S-10S ** 1.5 DF15005M-10M DF15005S-10S** W005G-10G KBP005G-10G 2.0 2W005G-10G KBP2005G-10G KBJ4005G-10G GBU4005G-10G 6.0 KBJ6005G-10G GBU6005G-10G GBJ GBU8005G-10G GBJ GBU10005G-10G GBJ GBJ GBPC GBPC15005W-10W* 20 GBJ GBJ GBPC GBPC25005W-10W * GBPC GBPC35005W-10W* * W suffix designates wire leaded versions for ease of PCB soldering ** DF-S are surface mount versions of the DF-M family

24 TVS (P/N: Stand-Off Voltage) Ppk(W) Axial Lead Surface Mount Direction DO-41 DO-15 DO-201 R-6 SMA SMB SMC Uni- SMA6.8A~200A 400 P4KE6.8A~ 440A SMAJ5.0A~170A Bi- SMA6.8CA~200CA P4KE6.8CA~ 440CA SMAJ5.0CA~170CA Uni- 500 SA5.0A-170A Bi- SA5.0CA~170CA Uni- SMB6.8A~200A 600 P6KE6.8A~400A SMBJ5.0A~170A Bi- SMB6.8CA~200CA P6KE6.8CA~400CA SMBJ5.0CA~170CA Uni- SMC6.8A~200A KE6.8A~400A SMCJ5.0A~170A Bi- SMC6.8CA~200CA 1.5KE6.8CA~400CA SMCJ5.0CA~170CA Uni KP5.0A~180A Bi- 5KP5.0CA~180CA

25 Diode & Rectifier Leaded Outline Drawings T-1 A-405 DO-41 5-W DO-15 5-KP DO-201 & DO-201AD R-6

26 Bridges: Rectifier & Bridge Leaded Outline Drawings Square/Wire leads SIP (In-line) Round Square/Terminals DIP Rectifiers: TO-220AB TO-220AC TO-3P

27 Diode & Rectifier Surface Mount Outline Drawings Mini MELF MELF D 2 -PAK DF-S HDDF SMA, B, C

International Company

International Company ISO 9001:2015 Manufacturer Since 1990 International Company Company Profile www.kingtronics.com www.kingtronics.cn www.m7diode.com PART ONE Kingtronics History Kingtronics History 1990 Kingtronics established

More information

VTC VM365830VSJ Pre-Amp

VTC VM365830VSJ Pre-Amp Construction Analysis VTC VM365830VSJ Pre-Amp Report Number: SCA 9708-549 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780 Fax: 602-515-9781

More information

WS-575-C-RT. Halogen-Free Ball-Attach Flux PRODUCT DATA SHEET

WS-575-C-RT. Halogen-Free Ball-Attach Flux PRODUCT DATA SHEET -RT Halogen-Free Ball-Attach Introduction Indium Corporation s Ball-Attach -RT allows customers to use a completely halogen-free (NIA = no intentionally added halogens) single-step ball-attach process

More information

Company Profile. ISO 9001:2008 & ISO 14001:2004 Manufacturers Military Certificate: GJB (TA Cap) Capacitors & Discrete Semiconductors

Company Profile. ISO 9001:2008 & ISO 14001:2004 Manufacturers Military Certificate: GJB (TA Cap) Capacitors & Discrete Semiconductors Company Profile ISO 9001:2008 & ISO 14001:2004 Manufacturers Military Certificate: GJB90018 2009 (TA Cap) Capacitors & Discrete Semiconductors Tel/Fax: +86 (0)769 8252 3211 Skype: topdiode Email: info@topdiode.com

More information

SiC high voltage device development

SiC high voltage device development SiC high voltage device development 2006. 11. 30 KERI Power Semiconductor Group outline 1. Device design & simulation for power devices 2. SiC power diode process development Ion implantation & activation

More information

Preliminary Ultraviolet Emitter

Preliminary Ultraviolet Emitter Preliminary Ultraviolet Emitter Product No: MTSM395UV-FP7140 Peak Emission Wavelength: 395 nm The MTSM395UV-FP7140 is a ultraviolet light emitting diode with peak emission wavelength of 395nm. The High

More information

Chapter 3 Silicon Device Fabrication Technology

Chapter 3 Silicon Device Fabrication Technology Chapter 3 Silicon Device Fabrication Technology Over 10 15 transistors (or 100,000 for every person in the world) are manufactured every year. VLSI (Very Large Scale Integration) ULSI (Ultra Large Scale

More information

New Component Technologies Enable More Robust and Reliable Power System Design

New Component Technologies Enable More Robust and Reliable Power System Design New Component Technologies Enable More Robust and Reliable Power System Design APEC2016 Chris Reynolds Technical Marketing Manager AVX Corporation (843) 424 1209 AVX Corporation 2016 http://www.avx.com

More information

First 50mm thick LGAD fabrication at CNM for the HGTD and CT-PPS

First 50mm thick LGAD fabrication at CNM for the HGTD and CT-PPS First 50mm thick LGAD fabrication at CNM for the HGTD and CT-PPS M. Carulla, P. Fernández-Martínez, D. Flores, S. Hidalgo, A. Merlos, G. Pellegrini, D. Quirion Centro Nacional de Microelectrónica, IMB-CNM-CSIC,

More information

Environmental Management and Materials Information

Environmental Management and Materials Information Environmental Management and Materials Information Product Content Information for: MAX44285FAWA+ Links Qualifications Package Description Chemical Composition Detailed Package Component Data Other Component

More information

Packaging solution for GaN-on-200mm Si power devices

Packaging solution for GaN-on-200mm Si power devices Edition June 2018 GaN power electronics Packaging solution for GaN-on-200mm Si power devices Imec and UTAC have developed a unique process for the wafer thinning and backside metallization of highly stressed

More information

HBLED packaging is becoming one of the new, high

HBLED packaging is becoming one of the new, high Ag plating in HBLED packaging improves reflectivity and lowers costs JONATHAN HARRIS, President, CMC Laboratories, Inc., Tempe, AZ Various types of Ag plating technology along with the advantages and limitations

More information

NTC Diode. Amphenol Advanced Sensors. Thermometrics Thermistors

NTC Diode. Amphenol Advanced Sensors. Thermometrics Thermistors NTC Diode Thermometrics Thermistors A range of NTC chip thermistors in DO-35 style glass package (diode outline) with axial soldercoated copper-clad steel wires. Designed for accurate temperature measurement,

More information

TSV Processing and Wafer Stacking. Kathy Cook and Maggie Zoberbier, 3D Business Development

TSV Processing and Wafer Stacking. Kathy Cook and Maggie Zoberbier, 3D Business Development TSV Processing and Wafer Stacking Kathy Cook and Maggie Zoberbier, 3D Business Development Outline Why 3D Integration? TSV Process Variations Lithography Process Results Stacking Technology Wafer Bonding

More information

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)

More information

Power Electronics Packaging Solutions for Device Junction Temperature over 220 o C

Power Electronics Packaging Solutions for Device Junction Temperature over 220 o C EPRC 12 Project Proposal Power Electronics Packaging Solutions for Device Junction Temperature over 220 o C 15 th August 2012 Page 1 Motivation Increased requirements of high power semiconductor device

More information

Cree EZ-p LED Chips Handling and Packaging Recommendations

Cree EZ-p LED Chips Handling and Packaging Recommendations Cree EZ-p LED Chips Handling and Packaging Recommendations INTRODUCTION This application note provides the user with an understanding of Cree s EZ-p p-pad up (anode up) LED devices, as well as recommendations

More information

Organic Light-Emitting Diodes. By: Sanjay Tiwari

Organic Light-Emitting Diodes. By: Sanjay Tiwari Organic Light-Emitting Diodes By: Sanjay Tiwari Inorganic Vs. Organic Material Properties Limitations At Early Stage Organic materials have often proved to be unstable. Making reliable electrical contacts

More information

TOWARD MEMS!Instructor: Riadh W. Y. Habash

TOWARD MEMS!Instructor: Riadh W. Y. Habash TOWARD MEMS!Instructor: Riadh W. Y. Habash Students are presented with aspects of general production and manufacturing of integrated circuit (IC) products to enable them to better liaise with and participate

More information

Chapter 11: Passives: Discrete, Integrated, and Embedded. Johan Liu

Chapter 11: Passives: Discrete, Integrated, and Embedded. Johan Liu Chapter 11: Passives: Discrete, Integrated, and Embedded Johan Liu jliu@chalmers.se 1 Types of Passive Components 2 Embedded passive devices: advantages Reduced system mass, volume and footprint. Individual

More information

A Functional Micro-Solid Oxide Fuel Cell with. Nanometer Freestanding Electrolyte

A Functional Micro-Solid Oxide Fuel Cell with. Nanometer Freestanding Electrolyte Electronic Supplementary Material (ESI) for Journal of Materials Chemistry A. This journal is The Royal Society of Chemistry 2017 SUPPLEMENTARY INFORMATION A Functional Micro-Solid Oxide Fuel Cell with

More information

PIL Product/Process Information Letter

PIL Product/Process Information Letter STMicroelectronics IPD - ASD & IPAD Division 1 BU Rectifiers (1) IPD: Industrial & Power Discretes - ASD: Application Specific Device IPAD : Integrated Passive and Active Devices PIL Product/Process Information

More information

White Paper. When the Lights Go Out: LED Failure Modes and Mechanisms By Joelle Arnold

White Paper. When the Lights Go Out: LED Failure Modes and Mechanisms By Joelle Arnold White Paper When the Lights Go Out: LED Failure Modes and Mechanisms By Joelle Arnold When the Lights Go Out: LED Failure Modes and Mechanisms Light Emitting Diodes are the wonder component of electronic

More information

LA WW40WP6. Premium Edition Warm White 40 mil

LA WW40WP6. Premium Edition Warm White 40 mil Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.

More information

NKK NR4645LQF Bit RISC Microprocessor

NKK NR4645LQF Bit RISC Microprocessor Construction Analysis NKK NR4645LQF-133 64-Bit RISC Microprocessor Report Number: SCA 9707-547 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9870

More information

Using Mass Metrology for Process Monitoring and Control During 3D Stacking of IC s

Using Mass Metrology for Process Monitoring and Control During 3D Stacking of IC s Metryx Copyright 1 Using Mass Metrology for Process Monitoring and Control During 3D Stacking of IC s SEMATECH 3D Interconnect Workshop 11 th July 2012 Metryx Copyright 2 Mass Metrology Less Mass More

More information

9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website :

9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website : 9 rue Alfred Kastler - BP 10748-44307 Nantes Cedex 3 - France Phone : +33 (0) 240 180 916 - email : info@systemplus.fr - website : www.systemplus.fr November 2010 - Version 2 Written by: Sylvain HALLEREAU

More information

Fraunhofer IZM. All Silicon System Integration Dresden Scope. M. Juergen Wolf

Fraunhofer IZM. All Silicon System Integration Dresden Scope. M. Juergen Wolf Fraunhofer IZM All Silicon System Integration Dresden Scope M. Juergen Wolf Fraunhofer IZM All Silicon System Integration - ASSID Dresden, Berlin, Germany Fraunhofer IZM Focus of Activities Materials,

More information

LED Die Attach Selection Considerations

LED Die Attach Selection Considerations LED Die Attach Selection Considerations Gyan Dutt & Ravi Bhatkal Alpha, An Alent plc Company Abstract Die attach material plays a key role in performance and reliability of mid, high and super-high power

More information

PCN Product/Process Change Notification

PCN Product/Process Change Notification STMicroelectronics IPD - ASD & IPAD Division 1 BU Protection (1) IPD: Industrial & Power Discretes - ASD: Application Specific Device IPAD : Integrated Passive and Active Devices PCN Product/Process Change

More information

PHYS 534 (Fall 2008) Process Integration OUTLINE. Examples of PROCESS FLOW SEQUENCES. >Surface-Micromachined Beam

PHYS 534 (Fall 2008) Process Integration OUTLINE. Examples of PROCESS FLOW SEQUENCES. >Surface-Micromachined Beam PHYS 534 (Fall 2008) Process Integration Srikar Vengallatore, McGill University 1 OUTLINE Examples of PROCESS FLOW SEQUENCES >Semiconductor diode >Surface-Micromachined Beam Critical Issues in Process

More information

EE 330 Lecture 12. Devices in Semiconductor Processes

EE 330 Lecture 12. Devices in Semiconductor Processes EE 330 Lecture 12 Devices in Semiconductor Processes Review from Lecture 9 Copper Interconnects Limitations of Aluminum Interconnects Electromigration Conductivity not real high Relevant Key Properties

More information

5W White SPHWHTA3N500

5W White SPHWHTA3N500 Product Family Data Sheet Rev. 00 2016.11.01 111 High Power LED Ceramic Series 5W White SPHWHTA3N500 Features & Benefits Package : Silicone covered ceramic substrate Dimension : 3.5 mm x 3.5 mm Technology

More information

Chapter 4 Fabrication Process of Silicon Carrier and. Gold-Gold Thermocompression Bonding

Chapter 4 Fabrication Process of Silicon Carrier and. Gold-Gold Thermocompression Bonding Chapter 4 Fabrication Process of Silicon Carrier and Gold-Gold Thermocompression Bonding 4.1 Introduction As mentioned in chapter 2, the MEMs carrier is designed to integrate the micro-machined inductor

More information

Silicon Wafer Processing PAKAGING AND TEST

Silicon Wafer Processing PAKAGING AND TEST Silicon Wafer Processing PAKAGING AND TEST Parametrical test using test structures regularly distributed in the wafer Wafer die test marking defective dies dies separation die fixing (not marked as defective)

More information

Product Specification

Product Specification Product Name : AEM Part Number : Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028

More information

Qualification Report. June, 1994, QTP# Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER DEVICE DESCRIPTION. Cascadable 32K x 9 FIFO

Qualification Report. June, 1994, QTP# Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER DEVICE DESCRIPTION. Cascadable 32K x 9 FIFO Qualification Report June, 1994, QTP# 92361 Version 1.1 CY7C46X/47X, MINNESOTA FAB MARKETING PART NUMBER CY7C460 CY7C462 CY7C464 CY7C470 CY7C472 CY7C474 DEVICE DESCRIPTION Cascadable 8K x 9 FIFO Cascadable

More information

T/C stress resistant high reliability solder alloy SB6NX / SB6N. Patented by Panasonic

T/C stress resistant high reliability solder alloy SB6NX / SB6N. Patented by Panasonic T/C stress resistant high reliability solder alloy X / Patented by Panasonic Sn 3.5Ag 0.5Bi 6.0In 0.8Cu Sn 3.5Ag 0.5Bi 6.0In X & solder alloy X alloy is Panasonic patented Conventional (Sn3.5Ag0.5Bi6In)

More information

5. Packaging Technologies Trends

5. Packaging Technologies Trends 5. Packaging Technologies Trends Electronic products and microsystems continue to find new applications in personal, healthcare, home, automotive, environmental and security systems. Advancements in packaging

More information

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION NARROW PITCH (0.4mm) CONNECTORS P4S SERIES Compliance with RoHS Directive http://www.mew.co.jp/ac/e/ FEATURES 1. Space saving Compared to the currently sold

More information

ST 79 SMD. ESCC 3003/006 - cases C & D ELECTRICAL AND CLIMATIC CHARACTERISTICS. DIMENSIONS (mm) HOW TO ORDER

ST 79 SMD. ESCC 3003/006 - cases C & D ELECTRICAL AND CLIMATIC CHARACTERISTICS. DIMENSIONS (mm) HOW TO ORDER ST 79 SMD ESCC 3003/006 - cases C & D Wet tantalum capacitors Hermetically sealed tantalum cases Very high capacitance Very low ESR High ripple current SMD Polarized types ELECTRICAL AND CLIMATIC CHARACTERISTICS

More information

Development of High Voltage Silicon Carbide MOSFET Devices in KERI

Development of High Voltage Silicon Carbide MOSFET Devices in KERI Development of High Voltage Silicon Carbide MOSFET Devices in KERI 2014. 06. Kim, Sang Cheol (sckim@keri.re.kr) Power Semiconductor Device Research Center Korea Electrotechnology Research Institute Contents

More information

Schottky Barrier Diode RB168LAM150

Schottky Barrier Diode RB168LAM150 Schottky Barrier Diode RB68LAM50 Applications Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification 2.50±0.20 0.7± 0. 0.05.4 2.0 () Features 4.4 ) Small power mold type (PMDTM) 3.70±0.20

More information

Regents of the University of California 1

Regents of the University of California 1 Electroplating: Metal MEMS Nickel Surface-Micromachining Process Flow Photoresist Wafer Release Etchant Use electroplating to obtain metal μstructures When thick: call it LIGA Pros: fast low temp deposition,

More information

NiC: A new functional layer with high sensitivity for pressure and force sensors

NiC: A new functional layer with high sensitivity for pressure and force sensors SIEGERT TFT GmbH Hermsdorf NiC: A new functional layer with high sensitivity for pressure and force sensors Chemnitzer Seminar: system integration technologies 14.06.2016 Dr. Tobias Liese 1 Overview Short

More information

Coatings and potting compounds for LED applications capabilities, limitations and trouble shooting

Coatings and potting compounds for LED applications capabilities, limitations and trouble shooting Coatings and potting compounds for LED applications capabilities, limitations and trouble shooting Content Some theory on conformal coatings and potting compounds Conformal coatings for lighting applications

More information

Dark current measurements of diodes on two SLID test wafers

Dark current measurements of diodes on two SLID test wafers Dark current measurements of diodes on two SLID test wafers Information collected by M. Beimforde for the MPP Inner Detector Upgrade Working Group August 16, 2007 Abstract In this short report the dark

More information

Recent Advances in Die Attach Film

Recent Advances in Die Attach Film Recent Advances in Die Attach Film Frederick Lo, Maurice Leblon, Richard Amigh, and Kevin Chung. AI Technology, Inc. 70 Washington Road, Princeton Junction, NJ 08550 www.aitechnology.com Abstract: The

More information

Self Qualification Report

Self Qualification Report Assembly Operations- Self Qualification Report NUR460/SOD141 Package qualification in (Qual Plan ref. ) Date: 2011-05-20 Author: Brian Xie Page: 1 Revision: 01 Table of Contents 1. Introduction... 3 2.

More information

Schottky Barrier Diode BAT54CHMFH

Schottky Barrier Diode BAT54CHMFH Schottky Barrier Diode BAT54CHMFH Datasheet AEC-Q Qualified Application Dimensions (Unit : mm) Land Size Figure (Unit : mm) Small current rectification Features ) Small mold type (SOT-23) 5D SOT-23 Structure

More information

Test Report. No. SHAEC Date: 25 May Page 1 of 10.

Test Report. No. SHAEC Date: 25 May Page 1 of 10. Test Report. No. SHAEC1708038904 Date: 25 May 2017. Page 1 of 10. KINGTRONICS INTERNATIONAL COMPANY. Room H, Floor 4, 13 Yip Fung Street, Hong Kong.. The following sample(s) was/were submitted and identified

More information

Regents of the University of California

Regents of the University of California Topography Issues Degradation of lithographic resolution PR step coverage, streaking Thickness differences pose problems for reduction steppers Direction of Spin PR PR PR Stringers Problematic when using

More information

Schottky Barrier Diode BAT54SHMFH

Schottky Barrier Diode BAT54SHMFH Schottky Barrier Diode BAT54SHMFH Datasheet AEC-Q Qualified Application Dimensions (Unit : mm) Land Size Figure (Unit : mm) Small current rectification Features ) Small power mold type (SOT-23) 5B SOT-23

More information

Q&A ThinPAK 8x8. New leadless SMD package for CoolMOS. May 2010 V 1.1

Q&A ThinPAK 8x8. New leadless SMD package for CoolMOS. May 2010 V 1.1 Q&A ThinPAK 8x8 New leadless SMD package for CoolMOS May 2010 V 1.1 Contents Package outline Manufacturing Package quality Materials and packing Electrical and thermal characteristics General 2010-01-14

More information

Maximum MAX662 12V DC-DC Converter

Maximum MAX662 12V DC-DC Converter Construction Analysis Maximum MAX662 12V DC-DC Converter Report Number: SCA 9512-445 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780

More information

National Semiconductor LM2672 Simple Switcher Voltage Regulator

National Semiconductor LM2672 Simple Switcher Voltage Regulator Construction Analysis National Semiconductor LM2672 Simple Switcher Voltage Regulator Report Number: SCA 9712-570 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale,

More information

Koki no-clean LEAD FREE solder paste. High-reliability Low Ag Lead Free Solder Paste

Koki no-clean LEAD FREE solder paste. High-reliability Low Ag Lead Free Solder Paste www.ko-ki.co.jp #514- Revised on Feb.4, 214 Koki no-clean LEAD FREE solder paste High-reliability Low Ag Lead Free Solder Paste S1XBIG58-M5-4 Product information S1XBIG SAC35 After -4/125ºC, 1 cycles This

More information

LA PD120HP1. Premium Edition Standard PIN photodiode 120 mil

LA PD120HP1. Premium Edition Standard PIN photodiode 120 mil Light Avenue Premium Edition detector series is designed for high performance consumer applications. This chip is a high sensitive PIN photodiode chip with 7.7 mm 2 sensitive area detecting visible and

More information

Schottky Barrier Diode RBR3LAM60B

Schottky Barrier Diode RBR3LAM60B Schottky Barrier Diode Applications Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification 2.50±0.20 0.7± 0. 0.05.4 2.0 () Features 4.4 ) Small power mold type (PMDTM) 3.70±0.20 4.70±0.4

More information

Schottky Barrier Diode RBR3LAM30A

Schottky Barrier Diode RBR3LAM30A Schottky Barrier Diode RBR3LAM30A Applications Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification 2.50±0.20 0.7± 0. 0.05.4 2.0 () Features 4.4 ) Small power mold type (PMDTM) 3.70±0.20

More information

KGC SCIENTIFIC Making of a Chip

KGC SCIENTIFIC  Making of a Chip KGC SCIENTIFIC www.kgcscientific.com Making of a Chip FROM THE SAND TO THE PACKAGE, A DIAGRAM TO UNDERSTAND HOW CPU IS MADE? Sand CPU CHAIN ANALYSIS OF SEMICONDUCTOR Material for manufacturing process

More information

Schottky Barrier Diode RBR1LAM60A

Schottky Barrier Diode RBR1LAM60A Schottky Barrier Diode RBRLAM6A Applications Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification 2.5±.2.7±..5.4 2. () Features 4.4 ) Small power mold type (PMDTM) 3.7±.2 4.7±.4 PMDTM

More information

3D-WLCSP Package Technology: Processing and Reliability Characterization

3D-WLCSP Package Technology: Processing and Reliability Characterization 3D-WLCSP Package Technology: Processing and Reliability Characterization, Paul N. Houston, Brian Lewis, Fei Xie, Ph.D., Zhaozhi Li, Ph.D.* ENGENT Inc. * Auburn University ENGENT, Inc. 2012 1 Outline Packaging

More information

SUPPLEMENTARY INFORMATIONS

SUPPLEMENTARY INFORMATIONS SUPPLEMENTARY INFORMATIONS Dynamic Evolution of Conducting Nanofilament in Resistive Switching Memories Jui-Yuan Chen, Cheng-Lun Hsin,,, Chun-Wei Huang, Chung-Hua Chiu, Yu-Ting Huang, Su-Jien Lin, Wen-Wei

More information

Packaging Technologies for SiC Power Modules

Packaging Technologies for SiC Power Modules Packaging Technologies for SiC Power Modules Masafumi Horio Yuji Iizuka Yoshinari Ikeda ABSTRACT Wide bandgap materials such as silicon carbide (SiC) and gallium nitride (GaN) are attracting attention

More information

IWORID 2006, July 4 th 2006

IWORID 2006, July 4 th 2006 An integrated single photon detector array using porous anodic alumina Joost Melai, Cora Salm, Jurriaan Schmitz, Sander Smits, Jan Visschers IWORID 2006, July 4 th 2006 04-06-2006 IWORID 2006 - Joost Melai

More information

1.25± ± ±0.05. Taping specifications (Unit : mm) 4.0± ± ± ±0.1 φf1.05. V F

1.25± ± ±0.05. Taping specifications (Unit : mm) 4.0± ± ± ±0.1 φf1.05. V F Schottky Barrier Diode RB1V-4 Datasheet Application Dimensions (Unit : mm) Land size figure (Unit : mm) Low current rectification Features 1) Ultra Small mold type. (UMD2) 2) Low I R 3) High reliability.

More information

Failure Analysis: The Right Way

Failure Analysis: The Right Way i Failure Analysis: The Right Way Counterfeit Diode Investigation DfR Staff i Introduction 1 A DfR customer received diodes through broker distribution channels that had shown a very high failure rate

More information

Long-term reliability of SiC devices. Power and Hybrid

Long-term reliability of SiC devices. Power and Hybrid Long-term reliability of SiC devices Power and Hybrid Rob Coleman Business Development and Applications Manager TT electronics, Power and Hybrid Roger Tall Product Specialist Charcroft Electronics Ltd

More information

Thin Wafers Bonding & Processing

Thin Wafers Bonding & Processing Thin Wafers Bonding & Processing A market perspective 2012 Why New Handling Technologies Consumer electronics is today a big driver for smaller, higher performing & lower cost device configurations. These

More information

LA WW40WP4. Premium Edition Warm White 40 mil

LA WW40WP4. Premium Edition Warm White 40 mil Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.

More information

Assembly Reliability of TSOP/DFN PoP Stack Package

Assembly Reliability of TSOP/DFN PoP Stack Package As originally published in the IPC APEX EXPO Proceedings. Assembly Reliability of TSOP/DFN PoP Stack Package Reza Ghaffarian, Ph.D. Jet Propulsion Laboratory, California Institute of Technology Pasadena,

More information

IPC RELIABILITY - CASTELLETTO. Reliability Report. Combo IC for PFC and ballast control Assembly plant location

IPC RELIABILITY - CASTELLETTO. Reliability Report. Combo IC for PFC and ballast control Assembly plant location General Information Locations Product Line Product Description Product division U337 Combo IC for PFC and ballast control I&PC Wafer fab location Assembly plant location ANG MO KIO MUAR Package SO20 Silicon

More information

9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website :

9 rue Alfred Kastler - BP Nantes Cedex 3 - France Phone : +33 (0) website : 9 rue Alfred Kastler - BP 10748-44307 Nantes Cedex 3 - France Phone : +33 (0) 240 180 916 - email : info@systemplus.fr - website : www.systemplus.fr November 2010 - Version 2 Written by: Sylvain HALLEREAU

More information

1SS427 1SS Applications. 2. Packaging and Internal Circuit Rev.3.0. Start of commercial production

1SS427 1SS Applications. 2. Packaging and Internal Circuit Rev.3.0. Start of commercial production Switching Diodes 1SS427 Silicon Epitaxial Planar 1SS427 1. Applications Ultra-High-Speed Switching 2. Packaging and Internal Circuit 1: Cathode 2: Anode SOD-923 1: Cathode 2: Anode fsc 1 Start of commercial

More information

PBD1040CS~BD10200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS. Voltage 40~200 V Current 10 A Features. Mechanical Data

PBD1040CS~BD10200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS. Voltage 40~200 V Current 10 A Features. Mechanical Data SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Voltage 40~200 V Current 10 A Features Plastic package has Underwriters Laboratory Flammability Classification 94V-O. For through hole applications Low power loss,

More information

Solder & Flux Bearing Leads & Equipment Leading you into the future with Interconnect Solutions

Solder & Flux Bearing Leads & Equipment Leading you into the future with Interconnect Solutions Solder & Flux Bearing Leads & Equipment..... Catalog Leading you into the future with Interconnect Solutions a heritage. b.... To Our Valued Customers 2008 marked the 50th anniversary of our company s

More information

Increased Efficiency and Improved Reliability in ORing functions using Trench Schottky Technology

Increased Efficiency and Improved Reliability in ORing functions using Trench Schottky Technology Increased Efficiency and Improved Reliability in ORing functions using Trench Schottky Technology Davide Chiola, Stephen Oliver, Marco Soldano International Rectifier, El Segundo, USA. As presented at

More information

XBSC/UBDC/UBSC/BBSC/ULSC 100 µm & 400 µm - Assembly by soldering

XBSC/UBDC/UBSC/BBSC/ULSC 100 µm & 400 µm - Assembly by soldering Assembly by soldering General description This document describes the attachment techniques recommended by Murata* for their pre-bumped and un-bumped silicon capacitors on the customer substrates. This

More information

Tape No. Description Principal Uses

Tape No. Description Principal Uses SPECIALTY TAPES, LLC 4221 Courtney Road Franksville, WI 53126 Tel: 262.835.0748 Fax: 262.835.0749 www.specialtytapes.net mchamberlain@specialtytapes.net DOUBLE COATED AND ADHESIVE TRANSFER TAPES: D620

More information

IPG (Industrial & Power Group) Industrial Power Conversion. Linear Voltage Regulators & Vref Quality and Reliability. Reliability Report.

IPG (Industrial & Power Group) Industrial Power Conversion. Linear Voltage Regulators & Vref Quality and Reliability. Reliability Report. Reliability Report BE Change New frame TO220 SG T.V: L7805 Product Line General Information LX05 Wafer fab Locations SINGAPORE Ang Mo Kio Product Description POSITIVE VR 1.5A 5V Assembly plant SHENZHEN

More information

1W White SPHWHTA2N100

1W White SPHWHTA2N100 Product Family Data Sheet Rev. 04 2017.10.20 1 High Power LED Ceramic Series 1W White SPHWHTA2N100 Features & Benefits Package : Silicone covered ceramic substrate Dimension : 2.3 mm x 2.3 mm Technology

More information

Motorola PC603R Microprocessor

Motorola PC603R Microprocessor Construction Analysis Motorola PC603R Microprocessor Report Number: SCA 9709-551 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780 Fax:

More information

HTSC SiCap 400µm - NiAu finishing - Assembly by soldering

HTSC SiCap 400µm - NiAu finishing - Assembly by soldering General description This document describes the attachment techniques recommended by Murata* for their HTSC silicon capacitors on the customer substrates. This document is non-exhaustive. Customers with

More information

SGS-Thomson M28C K EEPROM

SGS-Thomson M28C K EEPROM Construction Analysis SGS-Thomson M28C64-121 64K EEPROM Report Number: SCA 9710-559 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780

More information

Environmental Management and Materials Information

Environmental Management and Materials Information Environmental Management and Materials Information Product Content Information for: MAX3622CUE+ Links Qualifications Package Description Chemical Composition Detailed Package Component Data Qualifications

More information

Environmental Management and Materials Information

Environmental Management and Materials Information Environmental Management and Materials Information Product Content Information for: MAX3674ECM+T Links Qualifications Package Description Chemical Composition Detailed Package Component Data Qualifications

More information

LPSC SiCap 100µm NiAu finishing - Assembly by soldering

LPSC SiCap 100µm NiAu finishing - Assembly by soldering General description This document describes the attachment techniques recommended by Murata* for their LPSC silicon capacitors on the customer substrates. This document is non-exhaustive. Customers with

More information

Rockwell R RF to IF Down Converter

Rockwell R RF to IF Down Converter Construction Analysis Rockwell R6732-13 RF to IF Down Converter Report Number: SCA 9709-552 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780

More information

Schottky Barrier Diode RB168MM-60

Schottky Barrier Diode RB168MM-60 3.7±. 3.5±.5.75±. 8.±.2 3.5.85 Schottky Barrier Diode RB68MM-6 Application Dimensions (Unit : mm) Land Size Figure (Unit : mm) General rectification.6±...±.5.2 Features ) Small power mold type (PMDU) 2.6±.

More information

Copper Wire Packaging Reliability for Automotive and High Voltage

Copper Wire Packaging Reliability for Automotive and High Voltage Copper Wire Packaging Reliability for Automotive and High Voltage Tu Anh Tran AMPG Package Technology Manager Aug.11.2015 TM External Use Agenda New Automotive Environments Wire Bond Interconnect Selection

More information

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY REVISION RECORD REV DESCRIPTION DATE 0 INITIAL RELEASE 10/05/10 CAUTION: ELECTROSTATIC DISCHARGE SENSITIVE PART REVISION PAGE NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INDEX REVISION 0 0 0 0 0 0 0 0 0 0

More information

THERMAL MODELLING OF MULTI-FINGER ALGAN/GAN HEMT s. H. Oprins, J. Das, W. Ruythooren, R. Vandersmissen, B. Vandevelde, M. Germain

THERMAL MODELLING OF MULTI-FINGER ALGAN/GAN HEMT s. H. Oprins, J. Das, W. Ruythooren, R. Vandersmissen, B. Vandevelde, M. Germain Belgirate, Italy, 28-3 September 25 THERMAL MODELLING OF MULTI-FINGER ALGAN/GAN HEMT s H. Oprins, J. Das, W. Ruythooren, R. Vandersmissen, B. Vandevelde, M. Germain Imec vzw, Kapeldreef 75, B-31 Belgium

More information

3D technologies for integration of MEMS

3D technologies for integration of MEMS 3D technologies for integration of MEMS, Fraunhofer Institute for Electronic Nano Systems Folie 1 Outlook Introduction 3D Processes Process integration Characterization Sample Applications Conclusion Folie

More information

Beam Leads. Spider bonding, a precursor of TAB with all-metal tape

Beam Leads. Spider bonding, a precursor of TAB with all-metal tape Beam Leads The vast majority of chips are intended for connection with thermosonic bonds: all other methods require some modification to the wafer. As early as 1972, Jordan described three gang-bonding

More information

WorkShop Audace. INSA ROUEN 8 juin 2012

WorkShop Audace. INSA ROUEN 8 juin 2012 WorkShop Audace INSA ROUEN 8 juin 2012 Global Standards for the Microelectronics Industry JEDEC standards for product level qualification Christian Gautier Content JEDEC overview Environmental reliability

More information

Motorola MC68360EM25VC Communication Controller

Motorola MC68360EM25VC Communication Controller Construction Analysis EM25VC Communication Controller Report Number: SCA 9711-562 Global Semiconductor Industry the Serving Since 1964 17350 N. Hartford Drive Scottsdale, AZ 85255 Phone: 602-515-9780 Fax:

More information

CX Thin Fil s. Resistors Attenuators Thin-Film Products Thin-Film Services. ISO 9001:2008 RoHS/REACH Compliant ITAR Compliant

CX Thin Fil s. Resistors Attenuators Thin-Film Products Thin-Film Services.   ISO 9001:2008 RoHS/REACH Compliant ITAR Compliant CX Thin Fil s Resistors Attenuators Thin-Film Products Thin-Film Services www.cxthinfilms.com ISO 9001:2008 RoHS/REACH Compliant ITAR Compliant www.cxthinfilms.com sales@cxthinfilms.com +1 (401) 461-5500

More information

CORROSION & ITS CONTROL -Content. Introduction Classification Galvanic series Factors affecting Protection methods Summary

CORROSION & ITS CONTROL -Content. Introduction Classification Galvanic series Factors affecting Protection methods Summary CORROSION & ITS CONTROL -Content Introduction Classification Galvanic series Factors affecting Protection methods Summary 3 Learning Objectives At the end of the chapter the learner will be able to; 1.

More information

Fraunhofer ENAS Current results and future approaches in Wafer-level-packaging FRANK ROSCHER

Fraunhofer ENAS Current results and future approaches in Wafer-level-packaging FRANK ROSCHER Fraunhofer ENAS - Current results and future approaches in Wafer-level-packaging FRANK ROSCHER Fraunhofer ENAS Chemnitz System Packaging Page 1 System Packaging Outline: Wafer level packaging for MEMS

More information